To the files touched by the Google patch from c4144 (excluding
include/os0sync.ic because later we removed Google code from that file):
* Remove the Google license
* Remove old Innobase copyright lines
* Add a reference to the Google license and to the GPLv2 license at the top,
as recommended by the lawyers at Oracle Legal.
This patch changes the innodb mutexes and rw_locks implementation.
On supported platforms it uses GCC builtin atomics. These changes
are based on the patch sent by Mark Callaghan of Google under BSD
license. More technical discussion can be found at rb://30
Approved by: Heikki
This is to fix an unintended side effect of file_format_check changes.
We were reading the trx system page (TRX_SYS_PAGE_NO) before starting
recovery and that resulted in redo logs not being applied to the page.
The fix is to force a reread by calling buf_pool_invalidate().
This, however, made necessary that any writes to page are deferred to
until after the redo log application.
Reviewed by: Sunny
(r2478 was skipped for the obvious reason)
------------------------------------------------------------------------
r2464 | vasil | 2008-05-19 17:59:42 +0300 (Mon, 19 May 2008) | 9 lines
branches/5.1:
Fix Bug#36600 SHOW STATUS takes a lot of CPU in buf_get_latched_pages_number
by removing the Innodb_buffer_pool_pages_latched variable from
SHOW STATUS output in non-UNIV_DEBUG compilation.
Approved by: Heikki
------------------------------------------------------------------------
r2466 | calvin | 2008-05-20 01:37:14 +0300 (Tue, 20 May 2008) | 12 lines
branches/5.1:
Fix Bug#11894 innodb_file_per_table crashes w/ Windows .sym symbolic
link hack
The crash was due to un-handled error 3 (path not found). In the case
of file per table, change the call to os_file_handle_error_no_exit()
from os_file_handle_error(). Also, checks for full path pattern during
table create (Windows only), which is used in symbolic link and temp
table creation.
Approved by: Heikki
------------------------------------------------------------------------
r2478 | sunny | 2008-05-23 08:29:08 +0300 (Fri, 23 May 2008) | 3 lines
branches/5.1: Fix for bug# 36793. This is a back port from branches/zip. This
code has been tested on a big-endian machine too.
------------------------------------------------------------------------
r2480 | vasil | 2008-05-27 11:40:07 +0300 (Tue, 27 May 2008) | 11 lines
branches/5.1:
Fix Bug#36819 ut_usectime does not handle errors from gettimeofday
by retrying gettimeofday() several times if it fails in ut_usectime().
If it fails on all calls then return error to the caller to be handled
at higher level.
Update the variable innodb_row_lock_time_max in SHOW STATUS output only
if ut_usectime() was successful.
------------------------------------------------------------------------
r2482 | sunny | 2008-05-28 12:18:35 +0300 (Wed, 28 May 2008) | 5 lines
branches/5.1: Fix for Bug#35602, "Failed to read auto-increment value from
storage engine". The test for REPLACE was an error of ommission since it's
classified as a simple INSERT. For REPLACE statements we don't acquire
the special AUTOINC lock for AUTOINC_NEW_STYLE_LOCKING with this fix.
------------------------------------------------------------------------
r2485 | vasil | 2008-05-28 16:01:14 +0300 (Wed, 28 May 2008) | 9 lines
branches/5.1:
Fix Bug#36149 Read buffer overflow in srv0start.c found during "make test"
Use strncmp(3) instead of memcmp(3) to avoid reading past end of the string
if it is empty (*str == '\0'). This bug is _not_ a buffer overflow.
Discussed with: Sunny (via IM)
------------------------------------------------------------------------
Implement the system tablespace tagging described on the wiki:
https://svn.innodb.com/innobase/InnoDB_version_and_feature_compatibility
A brief description of the changes:
* The file format tag will be saved in the trx system page, starting at
(UNIV_PAGE_SIZE - 16) for 8 bytes.
* The configuration parameter innodb_file_format_check is introduced.
This variable can be set to on/off and any of the supported file
formats in the configuration file, but can only be set to any of
the supported file formats during runtime. The default is on.
* During table create/open, check the current file format against
the max in file_format_max. If the current file format is newer,
update file_format_max and tag the system tablespace with the
newer one in a normal mtr.
* During startup, write the tag to the error log and check it against
DICT_TF_FORMAT_MAX. Refuse to start with error, if
-- DICT_TF_FORMAT_MAX < the tag, and
-- innodb_file_format_check is ON
Print out a warning , if
-- DICT_TF_FORMAT_MAX < the tag, but
-- innodb_file_format_check is off
* The system tablespace tag is re-settable using:
set innodb_file_format_check = <file_format>
Approved by: Sunny
Add InnoDB version in these places:
* In INFORMATION_SCHEMA.PLUGINS.PLUGIN_VERSION, only 1.2 out of 1.2.3
because MySQL supports only one dot there
* At startup:
"080501 12:28:06 InnoDB Plugin 1.0.1 started; log sequence number 46509"
* In a server variable innodb_version;
mysql> select @@innodb_version;
+------------------+
| @@innodb_version |
+------------------+
| 1.0.1 |
+------------------+
Approved by: Sunny
Allow InnoDB I_S plugins to be installed when InnoDB storage engine is
not installed but show empty tables when SELECTing from them in this
case. Set srv_was_started to FALSE at the end of
innobase_shutdown_for_mysql() so the I_S plugins can detect if InnoDB is
uninstalled.
This is needed to workaround the MySQL
Bug#36399 Double free bug when INFORMATION_SCHEMA plugin init function fails
and is more flexible as it allows I_S plugins to be installed before the
InnoDB plugin and detects if the latter is uninstalled after this.
Approved by: Heikki
Fix Mantis issue#34 https://svn.innodb.com/mantis/view.php?id=34
"I_S plugins should refuse to load if the storage engine plugin is not loaded"
and MySQL Bug#36310 http://bugs.mysql.com/36310
"InnoDB plugin crash"
* Make srv_was_started public
* Set srv_was_started at the end of innobase_start_or_create_for_mysql()
so it is not set to TRUE if innodb encounters some startup error
* Refuse to start any of the I_S plugins if srv_was_started is not TRUE
Approved by: Heikki
variable innodb_file_format. Implement file format version stamping of
*.ibd files and SYS_TABLES.TYPE.
This change breaks introduces an incompatible change for for
compressed tables. We can do this, as we have not released yet.
innodb-zip.test: Add tests for stricter KEY_BLOCK_SIZE and ROW_FORMAT
checks.
DICT_TF_COMPRESSED_MASK, DICT_TF_COMPRESSED_SHIFT: Replace with
DICT_TF_ZSSIZE_MASK, DICT_TF_ZSSIZE_SHIFT.
DICT_TF_FORMAT_MASK, DICT_TF_FORMAT_SHIFT, DICT_TF_FORMAT_51,
DICT_TF_FORMAT_ZIP: File format version, stored in table->flags,
in the .ibd file header, and in SYS_TABLES.TYPE.
dict_create_sys_tables_tuple(): Write the table flags to SYS_TABLES.TYPE
if the format is at least DICT_TF_FORMAT_ZIP. For old formats
(DICT_TF_FORMAT_51), write DICT_TABLE_ORDINARY as the table type.
DB_TABLE_ZIP_NO_IBD: Remove the error code. The error handling is done
in ha_innodb.cc; as a failsafe measure, dict_build_table_def_step() will
silently clear the compression and format flags instead of returning this
error.
dict_mem_table_create(): Assert that no extra bits are set in the flags.
dict_sys_tables_get_zip_size(): Rename to dict_sys_tables_get_flags().
Check all flag bits, and return ULINT_UNDEFINED if the combination is
unsupported.
dict_boot(): Document the SYS_TABLES columns N_COLS and TYPE.
dict_table_get_format(), dict_table_set_format(),
dict_table_flags_to_zip_size(): New accessors to table->flags.
dtuple_convert_big_rec(): Introduce the auxiliary variables
local_len, local_prefix_len. Store a 768-byte prefix locally
if the file format is less than DICT_TF_FORMAT_ZIP.
dtuple_convert_back_big_rec(): Restore the columns.
srv_file_format: New variable: innodb_file_format.
fil_create_new_single_table_tablespace(): Replace the parameter zip_size
with table->flags.
fil_open_single_table_tablespace(): Replace the parameter zip_size_in_k
with table->flags. Check the flags.
fil_space_struct, fil_space_create(), fil_op_write_log():
Replace zip_size with flags.
fil_node_open_file(): Note a TODO item for InnoDB Hot Backup.
Check that the tablespace flags match.
fil_space_get_zip_size(): Rename to fil_space_get_flags(). Add a
wrapper for fil_space_get_zip_size().
fsp_header_get_flags(): New function.
fsp_header_init_fields(): Replace zip_size with flags.
FSP_SPACE_FLAGS: New name for the tablespace flags. This field used
to be called FSP_PAGE_ZIP_SIZE, or FSP_LOWEST_NO_WRITE. It has always
been written as 0 in MySQL/InnoDB versions 4.1 to 5.1.
MLOG_ZIP_FILE_CREATE: Rename to MLOG_FILE_CREATE2. Add a 32-bit
parameter for the tablespace flags.
ha_innobase::create(): Check the table attributes ROW_FORMAT and
KEY_BLOCK_SIZE. Issue errors if they are inappropriate, or warnings
if the inherited attributes (in ALTER TABLE) will be ignored.
PAGE_ZIP_MIN_SIZE_SHIFT: New constant: the 2-logarithm of PAGE_ZIP_MIN_SIZE.
There is one consideration: fil_init() chooses the tablespace hash size
based on the initial value of srv_file_per_table. However, this is nothing
new: InnoDB could be started with innodb_file_per_table=0 even though
*.ibd files exist.
srv_file_per_table: Declare as my_bool instead of ibool, because
MYSQL_SYSVAR_BOOL() expects a pointer to my_bool. Document the
variable also in srv0srv.h.
innobase_start_or_create_for_mysql(): Note why it is OK to temporarily
clear srv_file_per_table.
innobase_file_per_table: Remove.
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
now that all of InnoDB code is built from a single Makefile and it should
not be possible to build the modules with mutually incompatible options.
#define INSIDE_HA_INNOBASE_CC: Remove.
srv_sizeof_trx_t_in_ha_innodb_cc: Remove.
dict_table_get_low_noninlined(): Remove. This function was unused.
Remove all _noninline functions. Remove the _noninline suffix from
all function calls in ha_innodb.cc.
buf_page_get_gen(). This saves one mutex operation per block request.
buf_page_get_gen(), various macros and functions: Add parameter zip_size.
btr_node_ptr_get_child(): Add parameter index.
fil_space_get_latch(): Add optional output parameter zip_size.
fil_space_get_zip_size(): Return 0 for space id==0, because the
system tablespace is never compressed.
fsp_header_init(): Remove the parameter zip_size.
ibuf_free_excess_pages(): Remove the parameter zip_size.
trx_rseg_t, trx_undo_t: Add field zip_size.
xdes_lst_get_next(): Remove, unused.
mysql.patch: Patch to change or add variables to MySQL
innodb.patch: Patch to make the master thread poll requests to resize
the buffer pool.
Replace srv_pool_size and innobase_buffer_pool_size
with srv_buf_pool_size, srv_buf_pool_old_size,
and srv_buf_pool_curr_size.
Add buf_chunk_t, a collection of buf_block_t.
buf_pool_t: Remove n_frames, max_size, and blocks_of_frames.
The current buffer pool size is in curr_size.
buf_pool_init(): Remove parameter max_size.
buf_pool_get_max_size(), buf_pool_is_block(): Remove.
buf_block_align(): Do not assume that the buffer pool is allocated
in one chunk. Replace dependency on buf_pool->blocks_of_frames
with a call to buf_page_hash_get().
a few places accordingly.
os_aio_simulated_handle(): Add TODO comments about skipping the write
checks for compressed pages.
dict_create_sys_tables_tuple(): Write the compressed page size to
the TYPE column.
open_or_create_data_files(): Simplify the fil_node_create() call.
fil_node_create(): Do not touch space->zip_size. It was already initialized
by fil_space_create().
fil_reset_too_high_lsns(), buf_flush_buffered_writes(): Add TODO comment
about compressed pages.
buf_flush_init_for_writing(): Handle pages of type FIL_PAGE_INODE,
FIL_PAGE_IBUF_BITMAP, and FIL_PAGE_TYPE_FSP_HDR as uncompressed ones.
and to the file space header (FSP_PAGE_ZIP_SIZE, renamed from
FSP_LOWEST_NO_WRITE).
fil_space_struct: Add zip_size.
dict_table_struct: Embed zip_size in flags.
dict_table_zip_size(): Infer zip_size from table->flags.
dict_sys_tables_get_zip_size(): Read zip_size from SYS_TABLES.TYPE.
fil_space_get_zip_size(): Read zip_size from the file space header.
Add the redo log entry type MLOG_ZIP_FILE_CREATE.
