Dump thread may encounter an error when reading events from the active binlog
file. However the errors may be temporary, so dump thread will try to read
the event again. But dump thread seeked to an wrong position, it caused some
events was sent twice.
To fix the bug, prev_pos is defined out the while loop and is set the correct
position after reading every event correctly.
This patch also make binlog_can_be_corrupted more accurate, only the binlogs
not closed normally are marked binlog_can_be_corrupted.
Finally, two warnings are added when dump threads encounter the temporary
errors.
NO ERRORS REPORTED
Problem:
=======
Errors from my_b_fill are ignored. MYSQL_BIN_LOG::write_cache
code assumes that 0 returned from my_b_fill always means
end-of-cache, but that is incorrect. It can result in error
and the error is ignored. Other callers of my_b_fill don't
check for error: my_b_copy_to_file, maybe my_b_gets.
Fix:
===
An error handler is already present to check the "cache"
error that is reported during "MYSQL_BIN_LOG::write_cache"
call. Hence error handlers are added for "my_b_copy_to_file"
and "my_b_gets".
During my_b_fill() function call, when the cache read fails
info->error= -1 is set. Hence a check for "info->error"
is added for the above to callers upon their return.
mysys/mf_iocache2.c:
Added a check for "cache->error" and simulation of cache read failure
mysys/my_read.c:
Simulation of read failure
sql/log_event.cc:
Added debug simulation
sql/sql_repl.cc:
Added a check for cache error
In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.
Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
Problem
========
Replication breaks in the cases if the event length exceeds
the size of master Dump thread's max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet, on addition of the
max_event_header length exceeds the max_allowed_packet of the DUMP thread.
This causes the Dump thread to break replication and throw an error.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem is fixed in 2 steps:
1.) The Dump thread limit to read event is increased to the upper limit
i.e. Dump thread reads whatever gets logged in the binary log.
2.) On the slave side we increase the the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option (slave_max_allowed_packet)
included, is used to regulate the max_allowed_packet of the
slave thread (IO/SQL) by the DBA, and facilitates the sending of
large packets from the master to the slave.
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.cc:
The max_allowed_packet is not evaluated to the new option
slave_max_allowed_packet after the fix.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
sql/sql_repl.cc:
The dump thread's max_allowed_packet is set to the upper limit
which makes it independent and it now reads whatever gets
logged in the binary log.
Problem
========
SQL statements close to the size of max_allowed_packet produce binary
log events larger than max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet + max_event_header
length. Now since the event length exceeds this size master Dump
thread is unable to send the packet on to the slave.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem was fixed by increasing the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option included which is used to
regulate the max_allowed_packet of the slave thread (IO/SQL).
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value ,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
There are two calls to read_log_event() on master in mysql_binlog_send().
Each call reads 19 bytes in this test case and the error of the second
read_log_event() is reported to the slave.
The second read_log_event() starts from position 94 (75 + 19) to 113
(75 + 19 + 19). Usually, there are two events in the binary log:
. 0 - 3 - Header
. 4 - 105 - Format Descriptor Event
. 106 - 304 - Query Event
and both reads fail because operations are reading from invalid positions
as expected.
However, mysql_binlog_send() does not use the same IO_CACHE that is used to
write into binary log (i.e. mysql_bin_log.log_file) for the hot binary log.
It opens the binary log file directly by calling open_binlog() and creates a
separated IO_CACHE. So there is a possibly that after a master has flushed
the binary log file, the content has been cached by the filesystem, and has
not updated the disk file. If this happens, then a slave will only see part
of the file, and thus the second read_log_event() will report event truncated
error.
To fix the problem, if the first read_log_event() has failed, we ensure that
the second one will try to read from the same position.
rpl_packet got a timeout failure sporadically on PB when stopping
slave. The real reason of this bug is that STOP SLAVE stopped
IO thread first and then stopped SQL thread. It was
possible that IO thread stopped after replicating part of a
transaction which SQL thread was executing. SQL thread would
be hung if the transaction could not be rolled back safely.
After this patch, STOP SLAVE will stop SQL thread first and then stop IO
thread, which guarantees that IO thread will fetch the reset of the
events of the transaction that SQL thread is executing, so that SQL
thread can finish the transaction if it cannot be rolled back safely.
Added below auxiliary files to make the test code neater.
restart_slave_sql.inc
rpl_connection_master.inc
rpl_connection_slave.inc
rpl_connection_slave1.inc
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
client/mysql.cc:
Meaningless pointer dereferences.
client/mysql_upgrade.c:
Check whether reading from the file succeeded.
extra/comp_err.c:
Unused.
extra/yassl/src/yassl_imp.cpp:
Skip instead of reading data that is discarded.
include/my_pthread.h:
Variable is only used in debug builds.
include/mysys_err.h:
Add new error messages.
mysys/errors.c:
Add new error message for permission related functions.
mysys/mf_iocache.c:
Variable is only checked under THREAD.
mysys/my_copy.c:
Raise a error if chmod or chown fails.
mysys/my_redel.c:
Raise a error if chmod or chown fails.
regex/engine.c:
Use a equivalent variable for the assert.
server-tools/instance-manager/instance_options.cc:
Unused.
sql/field.cc:
Unused.
sql/item.cc:
Unused.
sql/log.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
Adjust doxygen comment to the right function.
Pass message lenght to log function.
sql/mysqld.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
sql/partition_info.cc:
Unused.
sql/slave.cc:
No need to set pointer to the address of '\0'.
sql/spatial.cc:
Unused. Left for historical purposes.
sql/sql_acl.cc:
Unused.
sql/sql_base.cc:
Pointers are always set to the same variables.
sql/sql_parse.cc:
End statement if reading fails.
Store the buffer after it has actually been updated.
sql/sql_repl.cc:
No need to set pointer to the address of '\0'.
sql/sql_show.cc:
Put variable under the same ifdef block.
sql/udf_example.c:
Set null pointer flag appropriately.
storage/csv/ha_tina.cc:
Meaningless dereferences.
storage/example/ha_example.cc:
Return the error since it's available.
storage/myisam/mi_locking.c:
Remove unused and dead code.
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
mysql-test/suite/rpl/r/rpl_packet.result:
update result file
mysql-test/suite/rpl/t/rpl_packet.test:
Add test that verifies that @@session.max_allowed_packet does not change
when issuing SHOW BINLOG EVENTS.
Make previous sub-test clean up.
Add comments listing the bugs in this test case.
sql/sql_repl.cc:
Restore the old value of thd->variables.max_allowed_packet at the
end of mysql_binlog_send and mysql_show_binlog_events.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
BUILD/SETUP.sh:
Remove flags that are implied by -Wall and -Wextra.
Do not warn about unused parameters in C++.
BUILD/check-cpu:
Print only the compiler version instead of verbose banner.
Although the option is gcc specific, the check was only
being used for GCC specific checks anyway.
client/mysql.cc:
bcmp is no longer defined.
client/mysqltest.cc:
Pass a string to function expecting a format string.
Replace use of bcmp with memcmp.
cmd-line-utils/readline/Makefile.am:
Always define _GNU_SOURCE when compiling GNU readline.
Required to make certain prototypes visible.
cmd-line-utils/readline/input.c:
Condition for the code to be meaningful.
configure.in:
Remove check for bcmp.
extra/comp_err.c:
Use appropriate type.
extra/replace.c:
Replace use of bcmp with memcmp.
extra/yassl/src/crypto_wrapper.cpp:
Do not ignore the return value of fgets. Retrieve the file
position if fgets succeed -- if it fails, the function will
bail out and return a error.
extra/yassl/taocrypt/include/blowfish.hpp:
Use a single array instead of accessing positions of the sbox_
through a subscript to pbox_.
extra/yassl/taocrypt/include/runtime.hpp:
One definition of such functions is enough.
extra/yassl/taocrypt/src/aes.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/algebra.cpp:
Rename arguments to avoid shadowing related warnings.
extra/yassl/taocrypt/src/blowfish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/integer.cpp:
Do not define type within a anonymous union.
Use a variable to return a value instead of
leaving the result in a register -- compiler
does not know the logic inside the asm.
extra/yassl/taocrypt/src/misc.cpp:
Define handler for pure virtual functions.
Remove unused code.
extra/yassl/taocrypt/src/twofish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/testsuite/test.hpp:
Function must have C language linkage.
include/m_string.h:
Remove check which relied on bcmp being defined -- they weren't
being used as bcmp is only visible when _BSD_SOURCE is defined.
include/my_bitmap.h:
Remove bogus helpers which were used only in a few files and
were causing warnings about dead code.
include/my_global.h:
Due to G++ bug, always silence false-positive uninitialized
variables warnings when compiling C++ code with G++.
Remove bogus helper.
libmysql/Makefile.shared:
Remove built-in implementation of bcmp.
mysql-test/lib/My/SafeProcess/safe_process.cc:
Cast pid to largest possible type for a process identifier.
mysys/mf_loadpath.c:
Leave space of the ending nul.
mysys/mf_pack.c:
Replace bcmp with memcmp.
mysys/my_bitmap.c:
Dead code removal.
mysys/my_gethwaddr.c:
Remove unused variable.
mysys/my_getopt.c:
Silence bogus uninitialized variable warning.
Do not cast away the constant qualifier.
mysys/safemalloc.c:
Cast to expected type.
mysys/thr_lock.c:
Silence bogus uninitialized variable warning.
sql/field.cc:
Replace bogus helper with a more appropriate logic which is
used throughout the code.
sql/item.cc:
Remove bogus logical condition which always evaluates to TRUE.
sql/item_create.cc:
Simplify code to avoid signedness related warnings.
sql/log_event.cc:
Replace use of bcmp with memcmp.
No need to use helpers for simple bit operations.
sql/log_event_old.cc:
Replace bmove_align with memcpy.
sql/mysqld.cc:
Move use declaration of variable to the ifdef block where it
is used. Remove now-unnecessary casts and arguments.
sql/set_var.cc:
Replace bogus helpers with simple and classic bit operations.
sql/slave.cc:
Cast to expected type and silence bogus warning.
sql/sql_class.h:
Don't use enum values as bit flags, the supposed type safety is
bogus as the combined bit flags are not a value in the enumeration.
sql/udf_example.c:
Only declare variable when necessary.
sql/unireg.h:
Replace use of bmove_align with memcpy.
storage/innobase/os/os0file.c:
Silence bogus warning.
storage/myisam/mi_open.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
storage/myisam/mi_page.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
strings/bcmp.c:
Remove built-in bcmp.
strings/ctype-ucs2.c:
Silence bogus warning.
tests/mysql_client_test.c:
Use a appropriate type as expected by simple_command().
at mf_iocache.c, line 1722
The slave crashed while two threads: IO thread and user thread
raced for the same mutex (the append_buffer_lock protecting the
relay log's IO_CACHE). The IO thread was trying to flush the
cache, and for that was grabbing the append_buffer_lock.
However, the other thread was closing and reopening the relay log
when the IO thread tried to lock. Closing and reopening the log
includes destroying and reinitialising the IO_CACHE
mutex. Therefore, the IO thread tried to lock a destroyed mutex.
We fix this by backporting patch for BUG#50364 which fixed this
bug in mysql server 5.5+. The patch deploys missing
synchronization when flush_master_info is called and the relay
log is flushed by the IO thread. In detail the patch backports
revision (from mysql-trunk):
- luis.soares@sun.com-20100203165617-b1yydr0ee24ycpjm
This patch already includes the post-push fix also in BUG#50364:
- luis.soares@sun.com-20100222002629-0cijwqk6baxhj7gr
When issuing a 'CHANGE MASTER TO' statement, key elements of the previous
state, namely the host, port, the master_log_file and the master_log_pos
are dumped into the error log.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
a pattern of usage DEBUG_SYNC for replication testing is provided.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
results are changed.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
limiting the test to run only with MIXED binlog-format as the test last
some 10 secs sensitively contributing to the total of tests run.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based.
sql/debug_sync.cc:
adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code.
sql/debug_sync.h:
externalizing debug_sync_set_action().
sql/item_func.cc:
purging sources from DBUG_SYNC_POINT.
sql/mysql_priv.h:
purging sources from DBUG_SYNC_POINT.
sql/slave.cc:
rewriting failure simulations to base on DEBUG_SYNC rather than GET_LOCK()-based DBUG_SYNC_POINT.
sql/sql_repl.cc:
removing an orphan failure simulation line because no counterpart in tests existing.
logging is disabled
The server would hit an assertion because of a DBUG violation.
There was a missing DBUG_RETURN and instead a plain return
was used.
This patch replaces the return with DBUG_RETURN.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
sql/sql_repl.cc:
The master send the Specific reasons instead of "error reading log entry" to the slave which is requesting a dump.
if an fatal error is returned by read_log_event function.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
sql/ha_myisam.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
Unnecessary locking with the global LOCK_thread_count
mutex has been removed.
sql/log_event.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the THD::set_query()) method call/LOCK_thd_data
mutex.
sql/slave.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the THD::set_query() method call/LOCK_thd_data mutex.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sp_head.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
sql/sql_class.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The new THD::LOCK_thd_data mutex and THD::set_query()
method has been added to guard modifications of THD::query/
THD::query_length fields, also the Statement::set_statement()
method has been overloaded in the THD class.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_class.h:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The new THD::LOCK_thd_data mutex and THD::set_query()
method has been added to guard modifications of THD::query/
THD::query_length fields, also the Statement::set_statement()
method has been overloaded in the THD class.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_insert.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
sql/sql_parse.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data mutex.
sql/sql_repl.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_show.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Inter-thread read of THD::query/query_length field has
been protected with a new per-thread LOCK_thd_data
mutex in the mysqld_list_processes function.
The server was not cleaning the last IO error and error number when
resetting slave.
This patch addresses this issue by backporting into 5.1 part of the
patch in BUG 34654. A fix for this issue had already been pushed into
6.0 as part of the aforementioned bug, however the patch also included
some refactoring. The fix for 5.1 does not take into account the
refactoring part.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Backported the test case and improved with deploying include/start_slave.inc
in relevant spots.
sql/slave.cc:
Backported part of patch from 6.0 that includes cleaning
mi->clear_error() at:
1. beginning of handle_slave_io
2. on successful connection
Also, backported the assertion added in the original patch.
sql/sql_repl.cc:
Backported the call to mi->clear_error() on reset_slave().
my_error() was invoked in reset_slave()'s with purge_relay_logs()-failing branch
without passing sql_errno to it.
Fixed with setting sql_errno= ER_RELAY_LOG_FAIL in the purge_relay_logs()-failing branch.
sql/sql_repl.cc:
set sql_errno= ER_RELAY_LOG_FAIL when purge_relay_logs() fails.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Adding comments to some of the high-level functions in replication.
sql/log_event.h:
Fixed some mistakes in comments.
sql/repl_failsafe.cc:
Added comment for show_slave_hosts()
sql/slave.cc:
Added comment for show_master_info(), handle_slave_[sql|io](), and next_event()
sql/sql_binlog.cc:
Added @param comment.
sql/sql_lex.h:
Added comment for st_lex_master_info.
sql/sql_repl.cc:
Added comments for functions executing a statement:
PURGE BINARY LOGS
START SLAVE
STOP SLAVE
RESET SLAVE
CHANGE MASTER
RESET MASTER
SHOW BINLOG EVENTS
SHOW MASTER STATUS
SHOW BINARY LOGS
Several system variables did not behave like system variables should do.
When trying to SET them or use them in SELECT, they were reported as
"unknown system variable". But they appeared in SHOW VARIABLES.
This has been fixed by removing the "fixed_vars" array of variables
and integrating the variables into the normal system variables chain.
All of these variables do now behave as read-only global-only
variables. Trying to SET them tells they are read-only, trying to
SELECT the session value tells they are global only. Selecting the
global value works. It delivers the same value as SHOW VARIABLES.
mysql-test/r/variables-notembedded.result:
Bug#28234 - global/session scope - documentation vs implementation
New test result.
mysql-test/r/variables.result:
Bug#28234 - global/session scope - documentation vs implementation
New test result.
mysql-test/t/variables-notembedded.test:
Bug#28234 - global/session scope - documentation vs implementation
Added a test for each moved variable that is not present in an
embedded server.
mysql-test/t/variables.test:
Bug#28234 - global/session scope - documentation vs implementation
Added a test for each moved variable that is also present in an
embedded server.
sql/item_func.cc:
Bug#28234 - global/session scope - documentation vs implementation
Added SHOW_BOOL to some Item_func_get_system_var methods.
sql/set_var.cc:
Bug#28234 - global/session scope - documentation vs implementation
Moved all variables from the "fixed_vars" array into the normal
system variables chain by using the new variable class sys_var_const.
Removed the fixed_show_vars array and its initialization in
enumerate_sys_vars().
Removed mysql_append_static_vars(), which added fixed_vars arrays
to the fixed_show_vars array.
sql/set_var.h:
Bug#28234 - global/session scope - documentation vs implementation
Added the new system variable class sys_var_const.
Removed declaration of mysql_append_static_vars().
sql/slave.cc:
Bug#28234 - global/session scope - documentation vs implementation
Moved the definition of show_slave_skip_errors() from sql_repl.cc
to here and renamed it to print_slave_skip_errors().
Changed print_slave_skip_errors() to create a static buffer with
a printable version of the error numbers set.
Added a call of print_slave_skip_errors() to init_slave_skip_errors().
sql/slave.h:
Bug#28234 - global/session scope - documentation vs implementation
Added declaration of slave_skip_error_names.
sql/sql_repl.cc:
Bug#28234 - global/session scope - documentation vs implementation
Moved all variables from the "fixed_vars" array into the normal
system variables chain by using the new variable class sys_var_const.
Moved the definition of show_slave_skip_errors() to slave.cc and
modified it to compute the string once at server initialization only.
Removed the call to mysql_append_static_vars().
Rotate event is automatically generated and written when rotating binary
log or relay log. Rotate events for relay logs are usually ignored by slave
SQL thread becuase they have the same server id as that of the slave.
However, if --replicate-same-server-id is enabled, rotate event
for relay log would be treated as if it's a rotate event from master, and
would be executed by slave to update the rli->group_master_log_name and
rli->group_master_log_pos to a wrong value and cause the MASTER_POS_WAIT
function to fail and return NULL.
This patch fixed this problem by setting a flag bit (LOG_EVENT_RELAY_LOG_F)
in the event to tell the SQL thread to ignore these Rotate events generated
for relay logs.
This patch also added another binlog event flag bit (LOG_EVENT_ARTIFICIAL_F)
to distinquish faked events, the method used before this was by checking if
log_pos was zero.
sql/log.h:
Add a member to MYSQL_BIN_LOG to distinguish binary log from relay log.
sql/log_event.cc:
Change artificial_event member to LOG_EVENT_ARTIFICIAL_F flag
If LOG_EVENT_RELAY_LOG_F is set in the event flags for a rotate event, ignore it when updating position
Refactored the code in Rotate_log_event::do_update_pos
sql/log_event.h:
Add LOG_EVENT_RELAY_LOG_F flag to Log_event flags
Add RELAY_LOG flag to Rotate_log_event flags
sql/sql_repl.cc:
Set LOG_EVENT_ARTIFICIAL_F for fake rotate events
exists t1,t2,t3'
Bug #34245 Test ndb_binlog_multi fails for 'CREATE TABLE'
Bug #34246 Test rpl_ndb_transaction fails with 'Failed to create
'mysql/ndb_apply_status'
Tests cases didn't wait for cluster to come up due to a typo
in have_multi_ndb.inc.
mysql-test/include/have_multi_ndb.inc:
SHOW TABLES is case-sensitive in the pattern to LIKE.
mysql-test/suite/ndb/t/disabled.def:
Enabling tests.
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction.test:
Adding include of have_debug since test requires that.
sql/sql_repl.cc:
Replacing 'return' with 'DBUG_RETURN' in debug-traced function.
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
client/client_priv.h:
Auto merged
include/my_sys.h:
Auto merged
mysql-test/mysql-test-run.pl:
Auto merged
mysql-test/lib/mtr_report.pl:
Auto merged
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_repl.cc:
Auto merged
sql/sql_view.cc:
Auto merged
mysql-test/suite/rpl/r/rpl_invoked_features.result:
Manual merge.
mysql-test/suite/rpl/t/rpl_invoked_features.test:
Manual merge.
sql/log.cc:
Manual merge.
BitKeeper/deleted/.del-show_binlog_events2.inc:
Delete: mysql-test/include/show_binlog_events2.inc
client/mysqlbinlog.cc:
char -> uchar for raw memory.
sql/item_cmpfunc.cc:
Adding cast to remove warning when converting negative integer
to unsigned type.
sql/log_event.cc:
char -> uchar for raw memory.
sql/log_event.h:
char -> uchar for raw memory.
sql/rpl_utility.cc:
Adding cast to remove warning when converting negative integer
to unsigned type.
sql/slave.cc:
char -> uchar for raw memory.
sql/sql_repl.cc:
char -> uchar for raw memory.
sql-common/client.c:
char -> uchar for raw memory.
read_buffer_size set on master
BUG#33413 show binlog events fails if binlog has event size of close
to max_allowed_packet
The size of Append_block replication event was determined solely by
read_buffer_size whereas the rest of replication code deals with
max_allowed_packet.
When the former parameter was set to larger than the latter there were
two artifacts: the master could not read events from binlog;
show master events did not show.
Fixed with
- fragmenting the used io-cached buffer into pieces each size of less
than max_allowed_packet (bug#30435)
- incrementing show-binlog-events handling thread's max_allowed_packet
with the max estimated for the replication header size
include/my_sys.h:
accessor-macros added in order not to mess with the io cache's implementation
details in code that merely exploits the io-cache.
sql/sql_repl.cc:
BUG#33413: incrementing thd->variables.max_allowed_packet with
the max estimation for the replication header size (from bug#19402);
refactoring log_loaded_block() to fragment the io_cache buffer in case
read_buffer_size > max_allowed_packet.
mysql-test/r/rpl_loaddata_map.result:
New BitKeeper file ``mysql-test/r/rpl_loaddata_map.result''
mysql-test/t/rpl_loaddata_map-master.opt:
specific options to trigger BUG#30435, BUG#33413 situations
mysql-test/t/rpl_loaddata_map-slave.opt:
max_allowed_packet to be compatible with the master's version.
mysql-test/t/rpl_loaddata_map.test:
regression tests for two bugs.
