An oveflow was happening on windows because on Windows sizeof(ulong) is 4 bytes
while it is 8 bytes on Linux.
Switched avg_frequency and avg length for column statistics to ulonglong.
Switched avg_frequency for index statistics to ulonglong.
The only InnoDB changes between Percona XtraDB Server 5.6.47-87.0
and 5.6.48-88.0 are related to InnoDB changes between MySQL 5.6.47
and MySQL 5.6.48, which we had already applied.
- Problem is that test case creates iblogfile* files. So existing
ibdata pages could point to future LSN. Fix is that taking the
backup of data before iblogfile* creation and apply it before
exiting the test case.
failed in Diagnostics_area::set_ok_status on FUNCTION replace
When there is REPLACE in the statement, sp_drop_routine_internal() returns
0 (SP_OK) on success which is then assigned to ret. So ret becomes false
and the error state is lost. The expression inside DBUG_ASSERT()
evaluates to false and thus the assertion failure.
Make sure that the sort_buffer that is allocated has atleast space for MERGEBUFF2 keys.
The issue here was that the record length is quite high and sort buffer size is very small,
due to which we end up with zero number of keys in the sort buffer. The Sort_param::max_keys_per_buffer
was zero in such a case, due to which we were flushing empty sort_buffer to the disk.
The issue here was that the left expr and right expr of the ANY subquery
had different character sets, so we were converting the left expr to utf8 character set.
So when this conversion was happening we were actually converting the item inside the cache,
it looked like <cache>(convert(t1.l1 using utf8)), which is incorrect.
To fix this problem we are going to store the reference of the left expr and convert that
to utf8 character set, it would look like convert(<cache>(`test`.`t1`.`l1`) using utf8)
Analysis:
========
When "Profiling" is enabled, server collects the resource usage of each
statement that gets executed in current session. Profiling doesn't support
nested statements. In order to ensure this behavior when profiling is enabled
for a statement, there should not be any other active query which is being
profiled. This active query information is stored in 'current' variable. When
a nested query arrives it finds 'current' being not NULL and server aborts.
When 'init_connect' and 'init_slave' system variables are set they contain a
set of statements to be executed. "execute_init_command" is the function call
which invokes "dispatch_command" for each statement provided in
'init_connect', 'init_slave' system variables. "execute_init_command" invokes
"start_new_query" and it passes the statement list to "dispatch_command". This
"dispatch_command" intern invokes "start_new_query" which leads to nesting of
queries. Hence '!current' assert is triggered.
Fix:
===
Remove profiling from "execute_init_command" as it will be done within
"dispatch_command" execution.
On FreeBSD, perl isn't in /usr/bin, its in /usr/local/bin or
elsewhere in the path.
Like storage/{maria/unittest/,}ma_test_* , we use /usr/bin/env to
find perl and run it.
The code in fill_schema_schemata() did not take into account that
make_db_list() can leave empty db_names if the requested database
name was too long, so the call for db_names.at(0) crashed on assert.
- Moving the code testing if the database directory exists
into a separate function verify_database_directory_exists()
- Modifying the test to check if db_names is not empty
Problem:
=======
The "Start binlog_dump" message hasn't been updated to include the slave's
requested GTID position:
20:05:05 139836760311552 [Note] Start binlog_dump to slave_server(2), pos(, 4)
For diagnostic purposes, it would be helpful if the GTID position were
included.
Fix:
===
Imporve "Start binlog_dump" print message to include "using_gtid" and
"GTID position" requested by slave.
Ex:
[Note] Start binlog_dump to slave_server(2), pos(, 4), using_gtid(1),
gtid('1-1-201,2-2-100')
[Note] Start binlog_dump to slave_server(3), pos('mariadb-bin.004142',
507988273), using_gtid(0), gtid('')
The code erroneously used buff[100] in a fiew places to make
a GRANTEE value in the form:
'user'@'host'
Fix:
- Fixing the code to use (USER_HOST_BUFF_SIZE + 6) instead of 100.
- Adding a DBUG_ASSERT to make sure the buffer is enough
- Wrapping the code into a class Grantee_str, to reuse it easier in 4 places.
The real problem was that attempt to roll back cahnes after end of memory in QC was made incorrectly and lead to using uninitialized memory.
(bug has nothing to do with resize operation, it is just lack of resources erro processed incorrectly)
In case of SELECT without tables which returns either 0 or 1 rows,
JOIN::exec_inner() did not check if the flag representing SQL_CALC_FOUND_ROWS
is set or not and send_records was direclty assigned 0. So SELECT FOUND_ROWS()
was giving 0 in the output. Now it checks if the flag is set, if it is set
send_record=1 else 0. 1 is the number of rows that could have been sent
to the client if the SELECT query had SQL_CALC_FOUND_ROWS.
It is 0 when no rows were sent because the SELECT query did not have
SQL_CALC_FOUND_ROWS.
For low sort_buffer_size, in the cost calculation of using the Unique object the elements in the tree were evaluated to 0, make sure to have atleast 1 element in the Unique tree.
Also for the function Unique::get allocate memory for atleast MERGEBUFF2+1 keys.
For DECIMAL[(M[,D])] datatype max_sort_length was not being honoured which was leading to buffer
overflow while making the sort key. The fix to this problem would be to create sort keys for decimals
with atmost max_sort_key bytes
Important:
The minimum value of max_sort_length has been raised to 8 (previously was 4),
so fixed size datatypes like DOUBLE and BIGINIT are not truncated for
lower values of max_sort_length.
Backported the support for aborting and replaying stored procedure and fix for trigger
key assigments from 10.4 version.
Backported also two mtr tests: wsrep_sp_bf_abort and MDEV-20225
- `SET DEFAULT ROLE xxx [FOR yyy]` should say:
"User yyy has not been granted a role xxx" if:
- The current user (not the user `yyy` in the FOR clause) can see the
role xxx. It can see the role if:
* role exists in `mysql.roles_mappings` (traverse the graph),
* If the current user has read access on `mysql.user` table - in
that case, it can see all roles, granted or not.
- Otherwise it should be "Invalid role specification".
In other words, it should not be possible to use `SET DEFAULT ROLE` to discover whether a specific role exist or not.
The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
that could be left unprocessed and thus to mix up the last executed
binlog group's file and position:
the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
is_until_satisfied.
The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.
An extra print out of the requested until file:pos is arranged
with --log-warning=3.
Do not blindly disconnect the connection that is in WAIT_FOR
because it could happen that neither the disconnect nor the
SIGNAL would be processed before RESET would discard the signal.
The code incorrectly assumed in multiple places that TYPELIB
values cannot have 0x00 bytes inside. In fact they can:
CREATE TABLE t1 (a ENUM(0x61, 0x0062) CHARACTER SET BINARY);
Note, the TYPELIB value encoding used in FRM is ambiguous about 0x00.
So this fix is partial.
It fixes 0x00 bytes in many (but not all) places:
- In the middle or in the end of a value:
CREATE TABLE t1 (a ENUM(0x6100) ...);
CREATE TABLE t1 (a ENUM(0x610062) ...);
- In the beginning of the first value:
CREATE TABLE t1 (a ENUM(0x0061));
CREATE TABLE t1 (a ENUM(0x0061), b ENUM('b'));
- In the beginning of the second (and following) value of the *last* ENUM/SET
in the table:
CREATE TABLE t1 (a ENUM('a',0x0061));
CREATE TABLE t1 (a ENUM('a'), b ENUM('b',0x0061));
However, it does not fix 0x00 when:
- 0x00 byte is in the beginning of a value of a non-last ENUM/SET
causes an error:
CREATE TABLE t1 (a ENUM('a',0x0061), b ENUM('b'));
ERROR 1033 (HY000): Incorrect information in file: './test/t1.frm'
This is an ambuguous case and will be fixed separately.
We need a new TYPELIB encoding to fix this.
Details:
- unireg.cc
The function pack_header() incorrectly used strlen() to detect
a TYPELIB value length. Adding a new function typelib_values_packed_length()
which uses TYPELIB::type_lengths[n] to detect the n-th value length,
and reusing the new function in pack_header() and packed_fields_length()
- table.cc
fix_type_pointers() assumed in multiple places that values cannot have
0x00 inside and used strlen(TYPELIB::type_names[n]) to set
the corresponding TYPELIB::type_lengths[n].
Also, fix_type_pointers() did not check the encoded data for consistency.
Rewriting fix_type_pointers() code to populate TYPELIB::type_names[n] and
TYPELIB::type_lengths[n] at the same time, so no additional loop
with strlen() is needed any more.
Adding many data consistency tests.
Fixing the main loop in fix_type_pointers() to use memchr() instead of
strchr() to handle 0x00 properly.
Fixing create_key_infos() to return the result in a LEX_STRING rather
that in a char*.
Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.
Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.
For no good reason, innodb_encryption_threads was limited to
4,294,967,295. Expectedly, the server would crash if such an
insane value was specified. Let us limit the maximum to 255.
The encryption threads are not doing much useful work.
They are basically only dirtying pages by performing
dummy writes via the redo log. The encryption key rotation
or the in-place addition or removal of encryption
will take place in the page cleaner.
In a quick test on a 20-core CPU (40 threads in total),
the sweet spot on an otherwise idle server seemed to be
innodb_encryption_threads=16 for the test
encryption.encrypt_and_grep. The new limit 255 should be
more than enough for even bigger servers.
This is a new test from upstream that did not expect the correct value
of the command slot of the Dump thread when the latter gets killed.
The test is made to expect "Killed" string as the command
in show-processlist as it is supposed to when a thread gets killed.
The assert was caused by early cleanup of a user variable participant
in BINLOG @var,@var where it plays twice. That was unexpected by the base
code to clear its value prematurely.
Fixed with relocating the user var destruction after operations with
its value is over.
The code erroneously allowed both:
INSERT INTO t1 (vcol) VALUES (DEFAULT);
INSERT INTO t1 (vcol) VALUES (DEFAULT(non_virtual_column));
The former is OK, but the latter is not.
Adding a new virtual method in Item:
virtual bool vcol_assignment_allowed_value() const { return false; }
Item_null, Item_param and Item_default_value override it.
Item_default_value overrides it in the way to:
- allow DEFAULT
- disallow DEFAULT(col)
For the case when the optimizer does the IN-EXISTS transformation,
the equality condition is injected in the WHERE OR HAVING clause of
the subquery. If the select list of the subquery has a reference to
the parent select make sure to use the reference and not the original
item.
The DECIMAL data type branch in Item_func_int_val::fix_length_and_dec()
incorrectly used DOUBLE-style length calculation, which resulted in
a smaller data type than the actual result of FLOOR()/CEIL() needs.
Let us limit the maximum value of the debug parameter
innodb_data_file_size to 256 MiB. It is only being used
in the test innodb.log_data_file_size, and the size
of the system tablespace should never exceed some 70 MiB
in ./mtr. Thus, 256 MiB should be a reasonable limit.
The fact that negative values that are passed to unsigned parameters
wrap around to the maximum value appears to be a regression due to
commit 18ef02b04d
and has been filed as bug MDEV-22219.
only MDL-prelock but do not open FK child tables for read-only (RESTRICT)
FK actions.
Tables still needs to be opened for CASCADE actions, see 9180e8666b
