- MDEV-11621 rpl.rpl_gtid_stop_start fails sporadically in buildbot
- MDEV-11620 rpl.rpl_upgrade_master_info fails sporadically in buildbot
The issue above was probably that the build machine was overworked and the
shutdown took longer than 30 resp 10 seconds, which caused MyISAM tables
to be marked as crashed.
Fixed by flushing myisam tables before doing a forced shutdown/kill.
I also increased timeout for forced shutdown from 10 seconds to 60 seconds
to fix other possible issues on slow machines.
Fixed also some compiler warnings
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
Implementation of MDEV-7660 introduced unwanted incompatible change:
modifications under LOCK TABLES with autocommit enabled are rolled back on
disconnect. Previously everything was committed, because LOCK TABLES didn't
adjust autocommit setting.
This patch restores original behavior by reverting some changes done in
MDEV-7660:
- sql/sql_parse.cc: do not reset autocommit on LOCK TABLES
- sql/sql_base.cc: do not set autocommit on UNLOCK TABLES
- test cases: main.lock_tables_lost_commit, main.partition_explicit_prune,
rpl.rpl_switch_stm_row_mixed, tokudb.nested_txn_implicit_commit,
tokudb_bugs.db806
But it makes InnoDB tables under LOCK TABLES ... READ [LOCAL] not protected
against DML. To restore protection some changes from WL#6671 were merged,
specifically MDL_SHARED_READ_ONLY and test cases.
WL#6671 merge highlights:
- Not all tests merged.
- In MySQL LOCK TABLES ... READ acquires MDL_SHARED_READ_ONLY for all engines,
in MariaDB MDL_SHARED_READ is always acquired first and then upgraded to
MDL_SHARED_READ_ONLY for InnoDB only.
- The above allows us to omit MDL_SHARED_WRITE_LOW_PRIO implementation in
MariaDB, which is rather useless with InnoDB. In MySQL it is needed to
preserve locking behavior between low priority writes and LOCK TABLES ... READ
for non-InnoDB engines (covered by sys_vars.sql_low_priority_updates_func).
- Omitted HA_NO_READ_LOCAL_LOCK, we rely on lock_count() instead.
- Omitted "piglets": in MariaDB stream of DML against InnoDB table may lead to
concurrent LOCK TABLES ... READ starvation.
- HANDLER ... OPEN acquires MDL_SHARED_READ instead of MDL_SHARED in MariaDB.
- Omitted SNRW->X MDL lock upgrade for IMPORT/DISCARD TABLESPAECE under LOCK
TABLES.
- Omitted strong locks for views, triggers and SP under LOCK TABLES.
- Omitted IX schema lock for LOCK TABLES READ.
- Omitted deadlock weight juggling for LOCK TABLES.
Full WL#6671 merge status:
- innodb.innodb-lock: fully merged
- main.alter_table: not merged due to different HANDLER solution
- main.debug_sync: fully merged
- main.handler_innodb: not merged due to different HANDLER solution
- main.handler_myisam: not merged due to different HANDLER solution
- main.innodb_mysql_lock: fully merged
- main.insert_notembedded: fully merged
- main.lock: not merged (due to no strong locks for views)
- main.lock_multi: not merged
- main.lock_sync: fully merged (partially in MDEV-7660)
- main.mdl_sync: not merged
- main.partition_debug_sync: not merged due to different HANDLER solution
- main.status: fully merged
- main.view: fully merged
- perfschema.mdl_func: not merged (no such test in MariaDB)
- perfschema.table_aggregate_global_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_4u_3t: not merged (didn't fail in MariaDB)
- sys_vars.sql_low_priority_updates_func: not merged
- include/thr_rwlock.h: not merged, rw_pr_lock_assert_write_owner and
rw_pr_lock_assert_not_write_owner are macros in MariaDB
- sql/handler.h: not merged (HA_NO_READ_LOCAL_LOCK)
- sql/mdl.cc: partially merged (MDL_SHARED_READ_ONLY only)
- sql/mdl.h: partially merged (MDL_SHARED_READ_ONLY only)
- sql/lock.cc: fully merged
- sql/sp_head.cc: not merged
- sql/sp_head.h: not merged
- sql/sql_base.cc: partially merged (MDL_SHARED_READ_ONLY only)
- sql/sql_base.h: not merged
- sql/sql_class.cc: fully merged
- sql/sql_class.h: fully merged
- sql/sql_handler.cc: merged partially (different solution in MariaDB)
- sql/sql_parse.cc: partially merged, mostly omitted low priority write part
- sql/sql_reload.cc: not merged comment change
- sql/sql_table.cc: not merged SNRW->X upgrade for IMPORT/DISCARD TABLESPACE
- sql/sql_view.cc: not merged
- sql/sql_yacc.yy: not merged (MDL_SHARED_WRITE_LOW_PRIO, MDL_SHARED_READ_ONLY)
- sql/table.cc: not merged (MDL_SHARED_WRITE_LOW_PRIO)
- sql/table.h: not merged (MDL_SHARED_WRITE_LOW_PRIO)
- sql/trigger.cc: not merged
- storage/innobase/handler/ha_innodb.cc: merged store_lock()/lock_count()
changes (in MDEV-7660), didn't merge HA_NO_READ_LOCAL_LOCK
- storage/innobase/handler/ha_innodb.h: fully merged in MDEV-7660
- storage/myisammrg/ha_myisammrg.cc: not merged comment change
- storage/perfschema/table_helper.cc: not merged (no MDL support in MariaDB PFS)
- unittest/gunit/mdl-t.cc: not merged
- unittest/gunit/mdl_sync-t.cc: not merged
MariaDB specific changes:
- handler.heap: different HANDLER solution, MDEV-7660
- handler.innodb: different HANDLER solution, MDEV-7660
- handler.interface: different HANDLER solution, MDEV-7660
- handler.myisam: different HANDLER solution, MDEV-7660
- main.mdl_sync: MDEV-7660 specific changes
- main.partition_debug_sync: removed test due to different HANDLER solution,
MDEV-7660
- main.truncate_coverage: removed test due to different HANDLER solution,
MDEV-7660
- mysql-test/include/mtr_warnings.sql: additional cleanup, MDEV-7660
- mysql-test/lib/v1/mtr_report.pl: additional cleanup, MDEV-7660
- plugin/metadata_lock_info/metadata_lock_info.cc: not in MySQL
- sql/sql_handler.cc: MariaDB specific fix for mysql_ha_read(), MDEV-7660
- created binlog_encryption test suite and added it to the default list
- moved some tests from rpl, binlog and multisource suites to extra
so that they could be re-used in different suites
- made minor changes in include files
This occured when the SQL thread (but not the IO thread) stops while
GTID and parallel replication are used with multiple domain ids in the
GTID position, and is restarted.
In this case, the SQL needs to start some way back in the relay log,
applying or skipping events within each replication domain as
appropriate.
The SQL threads starts at the beginning of an old relay log file, and
this position may be in the middle of an event group. The bug was that
such partial event group could be re-applied, causing replication
corruption.
This patch fixes the issue, by making sure to skip any initial events
that were part of an earlier (already applied) event group.
for InnoDB tables"
Don't use thr_lock.c locks for InnoDB tables. Below is list of changes that
were needed to implement this:
- HANDLER OPEN acquireis MDL_SHARED_READ instead of MDL_SHARED
- HANDLER READ calls external_lock() even if SE is not going to be locked by
THR_LOCK
- InnoDB lock wait timeouts are now honored which are much shorter by default
than server lock wait timeouts (1 year vs 50 seconds)
- with @@autocommit= 1 LOCK TABLES disables autocommit implicitely, though
user still sees @@autocommt= 1
- the above starts implicit transaction
- transactions started by LOCK TABLES are now rolled back on disconnect
(previously everything was committed due to autocommit)
- transactions started by LOCK TABLES are now rolled back by ROLLBACK
(previously everything was committed due to autocommit)
- it is now impossible to change BINLOG_FORMAT under LOCK TABLES (at least
to statement) due to running transaction
- LOCK TABLES WRITE is additionally handled by MDL
- ...in contrast LOCK TABLES READ protection against DML is pure InnoDB
- combining transactional and non-transactional tables under LOCK TABLES
may cause rolled back changes in transactional table and "committed"
changes in non-transactional table
- user may disable innodb_table_locks, which will cause LOCK TABLES to be
noop basically
Removed tests for BUG#45143 and BUG#55930 which cover InnoDB + THR_LOCK. To
operate properly these tests require code flow to go through THR_LOCK debug
sync points, which is not the case after this patch. These tests are removed
by WL#6671 as well. An alternative is to port them to different storage engine.
cherry-pick from 5.7:
commit 6b24763
Author: Manish Kumar <manish.4.kumar@oracle.com>
Date: Tue Mar 27 13:10:42 2012 +0530
BUG#12977988 - ON STOP SLAVE: ERROR READING PACKET FROM SERVER: LOST CONNECTION
TO MYSQL SERVER
BUG#11761457 - ERROR 2013 + "ERROR READING RELAY LOG EVENT" ON STOP SLAVEBUG#12977988 - ON STOP SLAVE: ERROR READING PACKET FROM SERVER: LOST CONNECTION
TO MYSQL SERVER
Merge feature into 10.2 from feature branch.
Delayed replication adds an option
CHANGE MASTER TO master_delay=<seconds>
Replication will then delay applying events with that many
seconds. This creates a replication slave that reflects the state of
the master some time in the past.
Feature is ported from MySQL source tree.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Problem:
When using the delayed slave feature, and the SQL thread is delaying,
and the user issues STOP SLAVE, the event we wait for was executed.
It should not be executed.
Fix:
Check the return value from the delay function,
slave.cc:slave_sleep(). If the return value is 1, it means the thread
has been stopped, in this case we don't execute the statement.
Also, refactored the test case for delayed slave a little: added the
test script include/rpl_assert.inc, which asserts that a condition holds
and prints a message if not. Made rpl_delayed_slave.test use this. The
advantage is that the test file is much easier to read and maintain,
because it is clear what is an assertion and what is not, and also the
expected result can be found in the test file, you don't have to compare
it to the result file.
Manually merged into MariaDB from MySQL commit
fd2b210383358fe7697f201e19ac9779879ba72a
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Initial merge of delayed replication from MySQL git.
The code from the initial push into MySQL is merged, and the
associated test case passes. A number of tasks are still pending:
1. Check full test suite run for any regressions or .result file updates.
2. Extend the feature to also work for parallel replication.
3. There are some todo-comments about future refactoring left from
MySQL, these should be located and merged on top.
4. There are some later related MySQL commits, these should be checked
and merged. These include:
e134b9362ba0b750d6ac1b444780019622d14aa5
b38f0f7857c073edfcc0a64675b7f7ede04be00f
fd2b210383358fe7697f201e19ac9779879ba72a
afc397376ec50e96b2918ee64e48baf4dda0d37d
5. The testcase from MySQL relies heavily on sleep and timing for
testing, and seems likely to sporadically fail on heavily loaded test
servers in buildbot or distro build farms.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This is similar to MysQL Worklog 3253, but with
a different implementation. The disk format and
SQL syntax is identical with MySQL 5.7.
Fetures supported:
- "Any" ammount of any trigger
- Supports FOLLOWS and PRECEDES to be
able to put triggers in a certain execution order.
Implementation details:
- Class Trigger added to hold information about a trigger.
Before this trigger information was stored in a set of lists in
Table_triggers_list and in Table_triggers_list::bodies
- Each Trigger has a next field that poinst to the next Trigger with the
same action and time.
- When accessing a trigger, we now always access all linked triggers
- The list are now only used to load and save trigger files.
- MySQL trigger test case (trigger_wl3253) added and we execute these
identically.
- Even more gracefully handling of wrong trigger files than before. This
is useful if a trigger file uses functions or syntax not provided by
the server.
- Each trigger now has a "Created" field that shows when the trigger was
created, with 2 decimals.
Other comments:
- Many of the changes in test files was done because of the new "Created"
field in the trigger file. This shows up in SHOW ... TRIGGER and when
using information_schema.trigger.
- Don't check if all memory is released if on uses --gdb; This is needed
to be able to get a list from safemalloc of not freed memory while
debugging.
- Added option to trim_whitespace() to know how many prefix characters
was skipped.
- Changed a few ulonglong sql_mode to sql_mode_t, to find some wrong usage
of sql_mode.
ENOTEMPTY is 247 on hppa, not 39 like on Linux, according to this report:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837369
So add another replacement for this to rpl.rpl_drop_db and
binlog.binlog_databasae tests (there were already a couple similar
replacements for other platforms).
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The issue was that when running with valgrind the wait for master_pos_Wait()
was not long enough.
This patch also fixes two other failures that could affect rpl_mdev6020:
- check_if_conflicting_replication_locks() didn't properly check domains
- 'did_mark_start_commit' was after signals to other threads was sent which could
get the variable read too early.
.. logged under row binlog format
In the early stages of ALTER TABLE execution, the implementation
checks whether its a NOOP (alter_info->flags == 0), and if so,
it returns after logging the command to binary log. The logging,
however, was done unconditionally.
Fixed by skipping the logging for temporary tables when under row
based replication.
.. share->last_version' failed in myisam/mi_open.c:67: test_if_reopen
During the RENAME operation since the renamed temporary table is also
opened and added to myisam_open_list/maria_open_list, resetting the
last_version at the end of operation (HA_EXTRA_PREPARE_FOR_RENAME)
will cause an assertion failure when a subsequent query tries to open
an additional temporary table instance and thus attempts to reuse it
from the open table list.
This commit fixes the issue by skipping flush/close operations executed
toward the end of ALTER for temporary tables. It also enables a shortcut
for simple ALTERs (like rename, disable/enable keys) on temporary
tables.
As safety checks, added some assertions at code points that should not
be hit for temporary tables.
- Force usage of () around complex DEFAULT expressions
- Give error if DEFAULT expression contains invalid characters
- Don't use const_charset_conversion for stored Item_func_sysconf expressions
as the result is not constaint over different executions
- Fixed Item_func_user() to not store calculated value in str_value
MDEV-10134 Add full support for DEFAULT
- Added support for using tables with MySQL 5.7 virtual fields,
including MySQL 5.7 syntax
- Better error messages also for old cases
- CREATE ... SELECT now also updates timestamp columns
- Blob can now have default values
- Added new system variable "check_constraint_checks", to turn of
CHECK constraint checking if needed.
- Removed some engine independent tests in suite vcol to only test myisam
- Moved some tests from 'include' to 't'. Should some day be done for all tests.
- FRM version increased to 11 if one uses virtual fields or constraints
- Changed to use a bitmap to check if a field has got a value, instead of
setting HAS_EXPLICIT_VALUE bit in field flags
- Expressions can now be up to 65K in total
- Ensure we are not refering to uninitialized fields when handling virtual fields or defaults
- Changed check_vcol_func_processor() to return a bitmap of used types
- Had to change some functions that calculated cached value in fix_fields to do
this in val() or getdate() instead.
- store_now_in_TIME() now takes a THD argument
- fill_record() now updates default values
- Add a lookahead for NOT NULL, to be able to handle DEFAULT 1+1 NOT NULL
- Automatically generate a name for constraints that doesn't have a name
- Added support for ALTER TABLE DROP CONSTRAINT
- Ensure that partition functions register virtual fields used. This fixes
some bugs when using virtual fields in a partitioning function
1. remove unnecessary rpl-tokudb combination file.
2. fix rpl_ignore_table to cleanup properly (not leave test
grants in memory)
3. check_temp_dir() is supposed to set the error in stmt_da - do
it even when called multiple times, this fixes a crash when
rpl.rpl_slave_load_tmpdir_not_exist is run twice.
The combination of --remove_file and --write_file on .expect file creates
a race condition which can be hit by MTR which reads the file in a loop.
Instead, .expect file should be changed with --append_file.
It was fixed in 10.x, but in 5.5 the sporadic failure still affected buildbot.
Fixed 3 test files which use the problematic combination
