Under unknown circumstances, the SQL layer may wrongly disregard an
invocation of thd_mark_transaction_to_rollback() when an InnoDB
transaction had been aborted (rolled back) due to one of the following errors:
* HA_ERR_LOCK_DEADLOCK
* HA_ERR_RECORD_CHANGED (if innodb_snapshot_isolation=ON)
* HA_ERR_LOCK_WAIT_TIMEOUT (if innodb_rollback_on_timeout=ON)
Such an error used to cause a crash of InnoDB during transaction commit.
These changes aim to catch and report the error earlier, so that not only
this crash can be avoided but also the original root cause be found and
fixed more easily later.
The idea of this fix is from Michael 'Monty' Widenius.
HA_ERR_ROLLBACK: A new error code that will be translated into
ER_ROLLBACK_ONLY, signalling that the current transaction
has been aborted and the only allowed action is ROLLBACK.
trx_t::state: Add TRX_STATE_ABORTED that is like
TRX_STATE_NOT_STARTED, but noting that the transaction had been
rolled back and aborted.
trx_t::is_started(): Replaces trx_is_started().
ha_innobase: Check the transaction state in various places.
Simplify the logic around SAVEPOINT.
ha_innobase::is_valid_trx(): Replaces ha_innobase::is_read_only().
The InnoDB logic around transaction savepoints, commit, and rollback
was unnecessarily complex and might have contributed to this
inconsistency. So, we are simplifying that logic as well.
trx_savept_t: Replace with const undo_no_t*. When we rollback to
a savepoint, all we need to know is the number of undo log records
that must survive.
trx_named_savept_t, DB_NO_SAVEPOINT: Remove. We can store undo_no_t
directly in the space allocated at innobase_hton->savepoint_offset.
fts_trx_create(): Do not copy previous savepoints.
fts_savepoint_rollback(): If a savepoint was not found, roll back
everything after the default savepoint of fts_trx_create().
The test innodb_fts.savepoint is extended to cover this code.
Reviewed by: Vladislav Lesin
Tested by: Matthias Leich
os_innodb_umask was of the incorrect type resulting in warnings
in clang-19. The correct type is mode_t.
As os_innodb_umask was set during innnodb_init from my_umask,
corrected the type there along with its companion my_umask_dir.
Because of this, the defaults mask values in innodb never
had an effect.
The resulting change allow found signed differences in
my_create{,_nosymlink}, open_nosymlinks:
mysys/my_create.c:47:20: error: operand of ?: changes signedness from ‘int’ to ‘mode_t’ {aka ‘unsigned int’} due to unsignedness of other operand [-Werror=sign-compare]
47 | CreateFlags ? CreateFlags : my_umask);
Ref: clang-19 warnings:
[55/123] Building CXX object storage/innobase/CMakeFiles/innobase.dir/os/os0file.cc.o
storage/innobase/os/os0file.cc:1075:46: warning: implicit conversion loses integer precision: 'ulint' (aka 'unsigned long') to 'mode_t' (aka 'unsigned int') [-Wshorten-64-to-32]
1075 | file = open(name, create_flag | O_CLOEXEC, os_innodb_umask);
| ~~~~ ^~~~~~~~~~~~~~~
storage/innobase/os/os0file.cc:1249:46: warning: implicit conversion loses integer precision: 'ulint' (aka 'unsigned long') to 'mode_t' (aka 'unsigned int') [-Wshorten-64-to-32]
1249 | file = open(name, create_flag | O_CLOEXEC, os_innodb_umask);
| ~~~~ ^~~~~~~~~~~~~~~
storage/innobase/os/os0file.cc:1381:45: warning: implicit conversion loses integer precision: 'ulint' (aka 'unsigned long') to 'mode_t' (aka 'unsigned int') [-Wshorten-64-to-32]
1381 | file = open(name, create_flag | O_CLOEXEC, os_innodb_umask);
| ~~~~ ^~~~~~~~~~~~~~~
gcc 7.5.0 does not understand __attribute__((no_sanitize("undefined"))
I moved the usage of this attribute from sql/set_var.h to
include/my_attribute.h and created a macro for it depending on
compiler used.
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
Change the type of my_hash_get_key to:
1) Return const
2) Change the context parameter to be const void*
Also fix casting in hash adjacent areas.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
The functions queue_compare, qsort2_cmp, and qsort_cmp2
all had similar interfaces, and were used interchangable
and unsafely cast to one another.
This patch consolidates the functions all into the
qsort_cmp2 interface.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
The code in best_access_path() uses PREV_BITS(uint, N) to
compute a bitmap of all keyparts: {keypart0, ... keypart{N-1}).
The problem is that PREV_BITS($type, N) macro code can't handle the case
when N=<number of bits in $type).
Also, why use PREV_BITS(uint, ...) for key part map computations when
we could have used PREV_BITS(key_part_map) ?
Fixed both:
- Change PREV_BITS(type, N) to handle any N in [0; n_bits(type)].
- Change PREV_BITS() to use key_part_map when computing key_part_map bitmaps.
The problem was that when using clang + asan, we do not get a correct value
for the thread stack as some local variables are not allocated at the
normal stack.
It looks like that for example clang 18.1.3, when compiling with
-O2 -fsanitize=addressan it puts local variables and things allocated by
alloca() in other areas than on the stack.
The following code shows the issue
Thread 6 "mariadbd" hit Breakpoint 3, do_handle_one_connection
(connect=0x5080000027b8,
put_in_cache=<optimized out>) at sql/sql_connect.cc:1399
THD *thd;
1399 thd->thread_stack= (char*) &thd;
(gdb) p &thd
(THD **) 0x7fffedee7060
(gdb) p $sp
(void *) 0x7fffef4e7bc0
The address of thd is 24M away from the stack pointer
(gdb) info reg
...
rsp 0x7fffef4e7bc0 0x7fffef4e7bc0
...
r13 0x7fffedee7060 140737185214560
r13 is pointing to the address of the thd. Probably some kind of
"local stack" used by the sanitizer
I have verified this with gdb on a recursive call that calls alloca()
in a loop. In this case all objects was stored in a local heap,
not on the stack.
To solve this issue in a portable way, I have added two functions:
my_get_stack_pointer() returns the address of the current stack pointer.
The code is using asm instructions for intel 32/64 bit, powerpc,
arm 32/64 bit and sparc 32/64 bit.
Supported compilers are gcc, clang and MSVC.
For MSVC 64 bit we are using _AddressOfReturnAddress()
As a fallback for other compilers/arch we use the address of a local
variable.
my_get_stack_bounds() that will return the address of the base stack
and stack size using pthread_attr_getstack() or NtCurrentTed() with
fallback to using the address of a local variable and user provided
stack size.
Server changes are:
- Moving setting of thread_stack to THD::store_globals() using
my_get_stack_bounds().
- Removing setting of thd->thread_stack, except in functions that
allocates a lot on the stack before calling store_globals(). When
using estimates for stack start, we reduce stack_size with
MY_STACK_SAFE_MARGIN (8192) to take into account the stack used
before calling store_globals().
I also added a unittest, stack_allocation-t, to verify the new code.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Don't allow the referencing key column from NULL TO NOT NULL
when
1) Foreign key constraint type is ON UPDATE SET NULL
2) Foreign key constraint type is ON DELETE SET NULL
3) Foreign key constraint type is UPDATE CASCADE and referenced
column declared as NULL
Don't allow the referenced key column from NOT NULL to NULL
when foreign key constraint type is UPDATE CASCADE
and referencing key columns doesn't allow NULL values
get_foreign_key_info(): InnoDB sends the information about
nullability of the foreign key fields and referenced key fields.
fk_check_column_changes(): Enforce the above rules for COPY
algorithm
innobase_check_foreign_drop_col(): Checks whether the dropped
column exists in existing foreign key relation
innobase_check_foreign_low() : Enforce the above rules for
INPLACE algorithm
dict_foreign_t::check_fk_constraint_valid(): This is used
by CREATE TABLE statement to check nullability for foreign
key relation.
Applied SR transaction on the child table was not BF aborted by TOI running
on the parent table for several reasons:
Although SR correctly collected FK-referenced keys to parent, TOI in Galera
disregards common certification index and simply sets itself to depend on
the latest certified write set seqno.
Since this write set was the fragment of SR transaction, TOI was allowed to
run in parallel with SR presuming it would BF abort the latter.
At the same time, DML transactions in the server don't grab MDL locks on
FK-referenced tables, thus parent table wasn't protected by an MDL lock from
SR and it couldn't provoke MDL lock conflict for TOI to BF abort SR transaction.
In InnoDB, DDL transactions grab shared MDL locks on child tables, which is not
enough to trigger MDL conflict in Galera.
InnoDB-level Wsrep patch didn't contain correct conflict resolution logic due to
the fact that it was believed MDL locking should always produce conflicts correctly.
The fix brings conflict resolution rules similar to MDL-level checks to InnoDB,
thus accounting for the problematic case.
Apart from that, wsrep_thd_is_SR() is patched to return true only for executing
SR transactions. It should be safe as any other SR state is either the same as
for any single write set (thus making the two logically equivalent), or it reflects
an SR transaction as being aborting or prepared, which is handled separately in
BF-aborting logic, and for regular execution path it should not matter at all.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The strncpy() wrapper that was introduced in
commit 567b681299
is checking whether the output was truncated even in cases
where the caller does not care about it.
Let us introduce a separate function safe_strcpy_truncated() that
indidates whether the output was truncated.
The shared counter template ib_counter_t uses the function
my_timer_cycles() as a source of pseudo-random numbers to pick a shard.
On some platforms, my_timer_cycles() could return the constant value 0.
get_rnd_value(): Remove.
my_pseudo_random(): Implement as an alias of my_timer_cycles() or
a wrapper for pthread_self().
Reviewed by: Vladislav Vaintroub
The problem was that the signal thread was not killed when using
unireg_abort().
The bug was introduced by:
MDEV-30260: Slave crashed:reload_acl_and_cache during shutdown
Other things fixed:
- Don't produce memory leaks with safemalloc if all threads was not
ended properly (not useful)
I checked all stack overflow potential problems found with
gcc -Wstack-usage=16384
and
clang -Wframe-larger-than=16384 -no-inline
Fixes:
Added '#pragma clang diagnostic ignored "-Wframe-larger-than="'
to a lot of function to where stack usage large but resonable.
- Added stack check warnings to BUILD scrips when using clang and debug.
Function changed to use malloc instead allocating things on stack:
- read_bootstrap_query() now allocates line_buffer (20000 bytes) with
malloc() instead of using stack. This has a small performance impact
but this is not releant for bootstrap.
- mroonga grn_select() used 65856 bytes on stack. Changed it to use
malloc().
- Wsrep_schema::replay_transaction() and
Wsrep_schema::recover_sr_transactions().
- Connect zipOpen3()
Not fixed:
- mroonga/vendor/groonga/lib/expr.c grn_proc_call() uses
43712 byte on stack. However this is not easy to fix as the stack
used is caused by a lot of code generated by defines.
- Most changes in mroonga/groonga where only adding of pragmas to disable
stack warnings.
- rocksdb/options/options_helper.cc uses 20288 of stack space.
(no reason to fix except to get rid of the compiler warning)
- Causes using alloca() where the allocation size is resonable.
- An issue in libmariadb (reported to connectors).
Fixed that internal temporary tables are not waiting for freed disk space.
Other things:
- 'kill id' will now kill a query waiting for free disk space instantly.
Before it could take up to 60 seconds for the kill would be noticed.
- Fixed that sorting one index is not using MY_WAIT_IF_FULL for temp files.
- Fixed bug where share->write_flag set MY_WAIT_IF_FULL for temp files.
It is quite hard to do a test case for this. Instead I tested all
combinations interactively.
Add "real ip:<ip_or_localhost>" part to the aborted message
Only for proxy-protocoled connection, so it does not not to cause
confusion to normal users.
Add "real ip:<ip_or_localhost>" part to the aborted message
Only for proxy-protocoled connection, so it does not not to cause
confusion to normal users.
This was caused by wrong allocation of variable on stack.
(Was allocating 4K of data instead of 512 bytes).
No test case as the original MDEV test cases is not usable for mtr.
MDEV-33502 Slowdown when running nested statement with many partitions
caused this error as I failed to take into account bigendian architectures.
This patch also introduces bitmap_import() and bitmap_export() to be used
when one wants to store bitmaps in files/logs in a portable way.
Reviewed-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Warnings are added to net_server.cc when
global_system_variables.log_warnings >= 4.
When the above condition holds then:
- All communication errors from net_serv.cc is also written to the
error log.
- In case of a of not being able to read or write a packet, a more
detailed error is given.
Other things:
- Added detection of slaves that has hangup to Ack_receiver::run()
- vio_close() is now first marking the socket closed before closing it.
The reason for this is to ensure that the connection that gets a read
error can check if the reason was that the socket was closed.
- Add a new state to vio to be able to detect if vio is acive, shutdown or
closed. This is used to detect if socket is closed by another thread.
- Testing of the new warnings is done in rpl_get_lock.test
- Suppress some of the new warnings in mtr to allow one to run some of
the tests with -mysqld=--log-warnings=4. All test in the 'rpl' suite
can now be run with this option.
- Ensure that global.log_warnings are restored at test end in a way
that allows one to use mtr --mysqld=--log-warnings=4.
Reviewed-by: <serg@mariadb.org>,<brandon.nesterenko@mariadb.com>
MDEV-33502 Slowdown when running nested statement with many partitions
This change was triggered to help some MariaDB users with close to
10000 bits in their bitmaps.
- Change underlaying storage to be 64 bit instead of 32bit.
- This reduses number of loops to scan bitmaps.
- This can cause some bitmaps to be 4 byte large.
- Ensure that all not used top-bits are always 0 (simplifes code as
the last 64 bit storage is not a special case anymore).
- Use my_find_first_bit() to find the first set bit which is much faster
than scanning trough things byte by byte and then bit by bit.
Other things:
- Added a bool to remember if my_bitmap_init() did allocate the bitmap
array. my_bitmap_free() will only free arrays it did allocate.
This allowed me to remove setting 'bitmap=0' before calling
my_bitmap_free() for cases where the bitmap's where allocated externally.
- my_bitmap_init() sets bitmap to 0 in case of failure.
- Added 'universal' asserts to most bitmap functions.
- Change all remaining calls to bitmap_init() to my_bitmap_init().
- To finish the change from 2014.
- Changed all usage of uint32 in my_bitmap.h to my_bitmap_map.
- Updated bitmap_copy() to handle bitmaps of different size.
- Removed const from bitmap_exists_intersection() as this caused casts
on all usage.
- Removed not used function bitmap_set_above().
- Renamed create_last_word_mask() to create_last_bit_mask() (to match
name changes in my_bitmap.cc)
- Extended bitmap-t with test for more bitmap functions.
Aria temporary tables account allocated memory as specific to the current
THD. But this fails for slave threads, where the temporary tables need to be
detached from any specific THD.
Introduce a new flag to mark temporary tables in replication as "global",
and use that inside Aria to not account memory allocations as thread
specific for such tables.
Based on original suggestion by Monty.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33308 CHECK TABLE is modifying .frm file even if --read-only
As noted in commit d0ef1aaf61,
MySQL as well as older versions of MariaDB server would during
ALTER TABLE ... IMPORT TABLESPACE write bogus values to the
PAGE_MAX_TRX_ID field to pages of the clustered index, instead of
letting that field remain 0.
In commit 8777458a6e this field
was repurposed for PAGE_ROOT_AUTO_INC in the clustered index root page.
To avoid trouble when upgrading from MySQL or older versions of MariaDB,
we will try to detect and correct bogus values of PAGE_ROOT_AUTO_INC
when opening a table for the first time from the SQL layer.
btr_read_autoinc_with_fallback(): Add the parameters to mysql_version,max
to indicate the TABLE_SHARE::mysql_version of the .frm file and the
maximum value allowed for the type of the AUTO_INCREMENT column.
In case the table was originally created in MySQL or an older version of
MariaDB, read also the maximum value of the AUTO_INCREMENT column from
the table and reset the PAGE_ROOT_AUTO_INC if it is above the limit.
dict_table_t::get_index(const dict_col_t &) const: Find an index that
starts with the specified column.
ha_innobase::check_for_upgrade(): Return HA_ADMIN_FAILED if InnoDB
needs upgrading but is in read-only mode. In this way, the call to
update_frm_version() will be skipped.
row_import_autoinc(): Adjust the AUTO_INCREMENT column at the end of
ALTER TABLE...IMPORT TABLESPACE. This refinement was suggested by
Debarun Banerjee.
The changes outside InnoDB were developed by Michael 'Monty' Widenius:
Added print_check_msg() service for easy reporting of check/repair messages
in ENGINE=Aria and ENGINE=InnoDB.
Fixed that CHECK TABLE do not update the .frm file under --read-only.
Added 'handler_flags' to HA_CHECK_OPT as a way for storage engines to
store state from handler::check_for_upgrade().
Reviewed by: Debarun Banerjee
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Since 0930eb86cb, system table creation
needed for spider init is delayed to the signal_ddl_recovery_done
callback. Since it is part of the init, failure should result in
spider deinit.
We also remove the call to spider_init_system_tables() from
spider_db_init(), as it was removed in the commit mentioned above and
accidentally restored in a merge.
This commit fixes GTID inconsistency which was injected by mariabackup SST.
Donor node now writes new info file: donor_galera_info, which is streamed
along the mariabackup donation to the joiner node. The donor_galera_info
file contains both GTID and gtid domain_id, and joiner will use these to
initialize the GTID state.
Commit has new mtr test case: galera_3nodes.galera_gtid_consistency, which
exercises potentially harmful mariabackup SST scenarios. The test has also
scenario with IST joining.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
