LEN <= SIZEOF(ULONGLONG)
This bug was caught in the WL#6255 ALTER TABLE...ADD COLUMN in MySQL
5.6, but there is a bug in all InnoDB versions that support
auto-increment columns.
row_search_autoinc_read_column(): When reading the maximum value of
the auto-increment column, and the column only contains NULL values,
return 0. This corresponds to the case when the table is empty in
row_search_max_autoinc().
rb:1415 approved by Sunny Bains
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
TRANSACTION ROLLBACK
Description: During the rollback operation, a blob page
is removed earlier than desired. Consider following scenario:
1. create table t1(a int primary key,b blob) engine=innodb;
2. insert into t1 values (1,repeat('b',9000));
3. begin;
4. update t1 set b=concat(b,'b');
5. update t1 set a=a+1;
6. insert into t1 values (1,repeat('b',9000));
7. rollback;
The update operation in line 5 produces 2 undo log record. The first
undo record (TRX_UNDO_DEL_MARK_REC) goes to trx->update_undo and the
second undo record (TRX_UNDO_INSERT_REC) goes to trx->insert_undo.
During rollback, they are executed out of order.
When the undo record TRX_UNDO_DEL_MARK_REC is applied/executed,
the blob ownership is also reset. Because of this the blob page
is released earlier than desired. This blob page must have been
freed only as part of applying/executing the undo record
TRX_UNDO_INSERT_REC.
This problem can be avoided by executing the undo records in
order. This patch will make innodb to execute the undo records
in order.
rb://1125 approved by Marko.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
The ha_innobase table handler contained two search key buffers
(srch_key_val1, srch_key_val2) of fixed size used to store the search
key. The size of these buffers where fixed at
REC_VERSION_56_MAX_INDEX_COL_LEN + 2. But this size is not sufficient
to hold the search key. Hence the following assert in
row_sel_convert_mysql_key_to_innobase() failed.
2438 /* Storing may use at most data_len bytes of buf */
2439
2440 if (UNIV_LIKELY(!is_null)) {
2441 ut_a(buf + data_len <= original_buf + buf_len);
2442 row_mysql_store_col_in_innobase_format(
2443 dfield, buf,
2444 FALSE, /* MySQL key value format col */
2445 key_ptr + data_offset, data_len,
2446 dict_table_is_comp(index->table));
2447 buf += data_len;
2448 }
The buffer size is now calculated with the formula
MAX_KEY_LENGTH + MAX_REF_PARTS*2. This properly takes into account
the extra bytes needed to store the length for each column. An index
can contain a maximum of MAX_REF_PARTS columns in it, and for each
column 2 bytes are needed to store length.
rb://1238 approved by Marko and Vasil Dimov.
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
rb://942
approved by: Marko Makela
We don't need to scan LRU for dropping AHI entries when DROPing a table.
AHI entries are already removed when we free up extents for the btree.
There are two threads. In one thread, dml operation is going on
involving cascaded update operation. In another thread, alter
table add foreign key constraint is happening. Under these
circumstances, it is possible for the dml thread to access a
dict_foreign_t object that has been freed by the ddl thread.
The debug sync test case provides the sequence of operations.
Without fix, the test case will crash the server (because of
newly added assert). With fix, the alter table stmt will return
an error message.
Backporting the fix from MySQL 5.5 to 5.1
rb:961
rb:947
There are two threads. In one thread, dml operation is going on
involving cascaded update operation. In another thread, alter
table add foreign key constraint is happening. Under these
circumstances, it is possible for the dml thread to access a
dict_foreign_t object that has been freed by the ddl thread.
The debug sync test case provides the sequence of operations.
Without fix, the test case will crash the server (because of
newly added assert). With fix, the alter table stmt will return
an error message.
rb:947
approved by Jimmy Yang
OF WIDE RECORDS
row_ins_index_entry_low(), row_upd_clust_rec(): Make a redo log
checkpoint if a DEBUG flag is set. Add DEBUG_SYNC around
btr_store_big_rec_extern_fields().
rb:946 approved by Jimmy Yang
print page dump
buf_page_print(): Remove the ut_ad(0) from the beginning. Add two flags
(enum buf_page_print_flags) that can be bitwise-ORed together:
BUF_PAGE_PRINT_NO_CRASH:
Do not crash debug builds at the end of buf_page_print().
BUF_PAGE_PRINT_NO_FULL:
Do not print the full page dump. This can be useful when adding
diagnostic printout to flushing or to the doublewrite buffer.
trx_sys_doublewrite_init_or_restore_page(): Replace exit(1) with ut_error,
so that we can get a core dump if this extraordinary condition happens.
rb:924 approved by Sunny Bains
