buf_page_io_complete(): Do not test bpage for NULL, because
it is declared (and always passed) as nonnull.
buf_flush_batch(): Remove the constant local variable count=0.
fil_ibd_load(): Use magic comment to suppress -Wimplicit-fallthrough.
ut_stage_alter_t::inc(ulint): Disable references to an unused parameter.
lock_queue_validate(), sync_array_find_thread(), rbt_check_ordering():
Define only in debug builds.
Only a relevant subset of the InnoDB changes was merged.
In particular, two follow-up bug fixes for the bugs that
were introduced in 5.7.18 but not MariaDB 10.2.7 were omitted.
Because MariaDB 10.2.7 omitted the risky change
Bug#23481444 OPTIMISER CALL ROW_SEARCH_MVCC() AND READ THE INDEX
APPLIED BY UNCOMMITTED ROWS
we do not need the follow-up fixes that were introduced in
MySQL 5.6.37 and MySQL 5.7.19:
Bug#25175249 ASSERTION: (TEMPL->IS_VIRTUAL && !FIELD) || ...
Bug#25793677 INNODB: FAILING ASSERTION: CLUST_TEMPL_FOR_SEC || LEN
Analysis:
========
(1) During TRUNCATE of file_per_table tablespace, dict_operation_lock is
released before eviction of dirty pages of a tablespace from the buffer
pool. After eviction, we try to re-acquire
dict_operation_lock (higher level latch) but we already hold lower
level latch (index->lock). This causes latch order violation
(2) Deadlock issue is present if child table is being truncated and it
holds index lock. At the same time, cascade dml happens and it took
dict_operation_lock and waiting for index lock.
Fix:
====
1) Release the indexes lock before releasing the dict operation lock.
2) Ignore the cascading dml operation on the parent table, for the
cascading foreign key, if the child table is truncated or if it is
in the process of being truncated.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
Reviewed-by: Kevin Lewis <kevin.lewis@oracle.com>
RB: 16122
row_update_for_mysql(): Remove the wrapper function and
rename the function from row_update_for_mysql_using_upd_graph().
Remove the unused parameter mysql_rec.
Always read full page 0 to determine does tablespace contain
encryption metadata. Tablespaces that are page compressed or
page compressed and encrypted do not compare checksum as
it does not exists. For encrypted tables use checksum
verification written for encrypted tables and normal tables
use normal method.
buf_page_is_checksum_valid_crc32
buf_page_is_checksum_valid_innodb
buf_page_is_checksum_valid_none
Modify Innochecksum logging to file to avoid compilation
warnings.
fil0crypt.cc fil0crypt.h
Modify to be able to use in innochecksum compilation and
move fil_space_verify_crypt_checksum to end of the file.
Add innochecksum logging to file.
univ.i
Add innochecksum strict_verify, log_file and cur_page_num
variables as extern.
page_zip_verify_checksum
Add innochecksum logging to file and remove unnecessary code.
innochecksum.cc
Lot of changes most notable able to read encryption
metadata from page 0 of the tablespace.
Added test case where we corrupt intentionally
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION (encryption key version)
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION+4 (post encryption checksum)
FIL_DATA+10 (data)
buf_flush_page_cleaner_coordinator: In the first loop, use an
appropriate termination condition, waiting for !recv_writer_thread_active.
logs_empty_and_mark_files_at_shutdown(): Signal recv_sys->flush_start
in case the recv_writer_thread was never started, or
buf_flush_page_cleaner_coordinator failed to notice its termination.
innobase_start_or_create_for_mysql(): Remove a redundant, unreachable
condition, and properly release resources when aborting startup due to
recv_sys->found_corrupt_log.
When using innodb_page_size=16k, InnoDB tables
that were created in MariaDB 10.1.0 to 10.1.20 with
PAGE_COMPRESSED=1 and
PAGE_COMPRESSION_LEVEL=2 or PAGE_COMPRESSION_LEVEL=3
would fail to load.
fsp_flags_is_valid(): When using innodb_page_size=16k, use a
more strict check for .ibd files, with the assumption that
nobody would try to use different-page-size files.
InnoDB I/O and buffer pool interfaces and the redo log format
have been changed between MariaDB 10.1 and 10.2, and the backup
code has to be adjusted accordingly.
The code has been simplified, and many memory leaks have been fixed.
Instead of the file name xtrabackup_logfile, the file name ib_logfile0
is being used for the copy of the redo log. Unnecessary InnoDB startup and
shutdown and some unnecessary threads have been removed.
Some help was provided by Vladislav Vaintroub.
Parameters have been cleaned up and aligned with those of MariaDB 10.2.
The --dbug option has been added, so that in debug builds,
--dbug=d,ib_log can be specified to enable diagnostic messages
for processing redo log entries.
By default, innodb_doublewrite=OFF, so that --prepare works faster.
If more crash-safety for --prepare is needed, double buffering
can be enabled.
The parameter innodb_log_checksums=OFF can be used to ignore redo log
checksums in --backup.
Some messages have been cleaned up.
Unless --export is specified, Mariabackup will not deal with undo log.
The InnoDB mini-transaction redo log is not only about user-level
transactions; it is actually about mini-transactions. To avoid confusion,
call it the redo log, not transaction log.
We disable any undo log processing in --prepare.
Because MariaDB 10.2 supports indexed virtual columns, the
undo log processing would need to be able to evaluate virtual column
expressions. To reduce the amount of code dependencies, we will not
process any undo log in prepare.
This means that the --export option must be disabled for now.
This also means that the following options are redundant
and have been removed:
xtrabackup --apply-log-only
innobackupex --redo-only
In addition to disabling any undo log processing, we will disable any
further changes to data pages during --prepare, including the change
buffer merge. This means that restoring incremental backups should
reliably work even when change buffering is being used on the server.
Because of this, preparing a backup will not generate any further
redo log, and the redo log file can be safely deleted. (If the
--export option is enabled in the future, it must generate redo log
when processing undo logs and buffered changes.)
In --prepare, we cannot easily know if a partial backup was used,
especially when restoring a series of incremental backups. So, we
simply warn about any missing files, and ignore the redo log for them.
FIXME: Enable the --export option.
FIXME: Improve the handling of the MLOG_INDEX_LOAD record, and write
a test that initiates a backup while an ALGORITHM=INPLACE operation
is creating indexes or rebuilding a table. An error should be detected
when preparing the backup.
FIXME: In --incremental --prepare, xtrabackup_apply_delta() should
ensure that if FSP_SIZE is modified, the file size will be adjusted
accordingly.
The POINT data type is being treated just like any other
geometry data type in InnoDB. The fixed-length data type
DATA_POINT had been introduced in WL#6942 based on a
misunderstanding and without appropriate review.
Because of fundamental design problems (such as a
DEFAULT POINT(0 0) value secretly introduced by InnoDB),
the code was disabled in Oracle Bug#20415831 fix.
This patch removes the dead code and definitions that were
left behind by the Oracle Bug#20415831 patch.
This is preparation for MDEV-12288, which would set DB_TRX_ID=0
when purging history. Also with that change in place, delete-marked
records must always refer to an undo log record via a nonzero
DB_TRX_ID column. (The DB_TRX_ID is only present in clustered index
leaf page records.)
btr_cur_parse_del_mark_set_clust_rec(), rec_get_trx_id():
Statically allocate the offsets
(should never use the heap). Add some debug assertions.
Replace some use of rec_get_trx_id() with row_get_rec_trx_id().
trx_undo_report_row_operation(): Add some sanity checks that are
common for all operations that produce undo log.
The field fts_token->position is not initialized in
row_merge_fts_doc_tokenize(). We cannot have that field
without changing the fulltext parser plugin ABI
(adding st_mysql_ftparser_boolean_info::position,
as it was done in MySQL 5.7 in WL#6943).
The InnoDB fulltext parser plugins "ngram" and "Mecab" that were
introduced in MySQL 5.7 do depend on that field. But the simple_parser
does not. Apparently, simple_parser is leaving the field as 0.
So, in our fix we will assume that the missing position field is 0.
In Mariabackup, we would want the backed-up redo log file size to be
a multiple of 512 bytes, or OS_FILE_LOG_BLOCK_SIZE. However, at startup,
InnoDB would be picky, requiring the file size to be a multiple of
innodb_page_size.
Furthermore, InnoDB would require the parameter to be a multiple of
one megabyte, while the minimum granularity is 512 bytes. Because
the data-file-oriented fil_io() API is being used for writing the
InnoDB redo log, writes will for now require innodb_log_file_size to
be a multiple of the maximum innodb_page_size (65536 bytes).
To complicate matters, InnoDB startup divided srv_log_file_size by
UNIV_PAGE_SIZE, so that initially, the unit was bytes, and later it
was innodb_page_size. We will simplify this and keep srv_log_file_size
in bytes at all times.
innobase_log_file_size: Remove. Remove some obsolete checks against
overflow on 32-bit systems. srv_log_file_size is always 64 bits, and
the maximum size 512GiB in multiples of innodb_page_size always fits
in ulint (which is 32 or 64 bits). 512GiB would be 8,388,608*64KiB or
134,217,728*4KiB.
log_init(): Remove the parameter file_size that was always passed as
srv_log_file_size.
log_set_capacity(): Add a parameter for passing the requested file size.
srv_log_file_size_requested: Declare static in srv0start.cc.
create_log_file(), create_log_files(),
innobase_start_or_create_for_mysql(): Invoke fil_node_create()
with srv_log_file_size expressed in multiples of innodb_page_size.
innobase_start_or_create_for_mysql(): Require the redo log file sizes
to be multiples of 512 bytes.
trx_sys_print_mysql_binlog_offset(): Use 64-bit arithmetics and ib::info().
TRX_SYS_MYSQL_LOG_OFFSET: Replaces TRX_SYS_MYSQL_LOG_OFFSET_HIGH,
TRX_SYS_MYSQL_LOG_OFFSET_LOW.
trx_sys_update_mysql_binlog_offset(): Remove the constant parameter
field=TRX_SYS_MYSQL_LOG_INFO. Use 64-bit arithmetics.
recv_sys_init(): Remove the parameter.
recv_sys_create(): Merge to recv_sys_init().
recv_sys_mem_free(): Merge to recv_sys_close().
log_mem_free(): Merge to log_shutdown().
srv_log_files_created: A debug flag to ensure that InnoDB redo log
files can only be created once in the server lifetime, and that
after log files have been created, no crash recovery will take place.
recv_scan_log_recs(): Detect the special case where the log consists
of a sole MLOG_CHECKPOINT record, such as immediately after creating
the redo logs.
recv_recovery_from_checkpoint_start(): Skip the recovery message
if the redo log is logically empty.
A merge error caused InnoDB bootstrap to fail when
innodb_undo_tablespaces was set to more than 2.
This was because of a bug that was introduced to
srv_undo_tablespaces_init() by the merge.
Furthermore, some adjustments for Oracle Bug#25551311 aka
Bug#23517560 changes were forgotten. We must minimize direct
references to srv_undo_tablespaces_open and use predicates
instead.
srv_undo_tablespaces_init(): Increment srv_undo_tablespaces_open
once, not twice, per loop iteration.
is_system_or_undo_tablespace(): Remove (unused function).
is_predefined_tablespace(): Invoke srv_is_undo_tablespace().
When the btr_search_latch was split into an array of latches
in MySQL 5.7.8 as part of the Oracle Bug#20985298 fix, the "caching"
of the latch across storage engine API calls was removed, and
the field trx->has_search_latch would only be set during a short
time frame in the execution of row_search_mvcc(), which was
formerly called row_search_for_mysql().
This means that the column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_LATCHED will always
report 0. That column cannot be removed in MariaDB 10.2, but it
can be removed in future releases.
trx_t::has_search_latch: Remove.
trx_assert_no_search_latch(): Remove.
row_sel_try_search_shortcut_for_mysql(): Remove a redundant condition
on trx->has_search_latch (it was always true).
sync_check_iterate(): Make the parameter const.
sync_check_functor_t: Make the operator() const, and remove result()
and the virtual destructor. There is no need to have mutable state
in the functors.
sync_checker<bool>: Replaces dict_sync_check and btrsea_sync_check.
sync_check: Replaces btrsea_sync_check.
dict_sync_check: Instantiated from sync_checker.
sync_allowed_latches: Use std::find() directly on the array.
Remove the std::vector.
TrxInInnoDB::enter(), TrxInInnoDB::exit(): Remove obviously redundant
debug assertions on trx->in_depth, and use equality comparison against 0
because it could be more efficient on some architectures.
dict_sys_tables_type_to_tf(): Change the parameter n_cols to not_redundant.
dict_tf_is_valid_not_redundant(): Refactored from dict_tf_is_valid().
dict_sys_tables_type_valid(): Replaces dict_sys_tables_type_validate().
Use the common function dict_tf_is_valid_not_redundant(), which validates
PAGE_COMPRESSION_LEVEL more strictly.
DICT_TF_GET_UNUSED(flags): Remove.
innodb.table_flags: Adjust the test case. Due to the MDEV-12873 fix
in 10.2, the corrupted flags for table test.td would be converted,
and a tablespace flag mismatch will occur when trying to open the file.
Remove the SHARED_SPACE flag that was erroneously introduced in
MariaDB 10.2.2, and shift the SYS_TABLES.TYPE flags back to where
they were before MariaDB 10.2.2. While doing this, ensure that
tables created with affected MariaDB versions can be loaded,
and also ensure that tables created with MySQL 5.7 using the
TABLESPACE attribute cannot be loaded.
MariaDB 10.2.2 picked the SHARED_SPACE flag from MySQL 5.7,
shifting the MariaDB 10.1 flags PAGE_COMPRESSION, PAGE_COMPRESSION_LEVEL,
ATOMIC_WRITES by one bit. The SHARED_SPACE flag would always
be written as 0 by MariaDB, because MariaDB does not support
CREATE TABLESPACE or CREATE TABLE...TABLESPACE for InnoDB.
So, instead of the bits AALLLLCxxxxxxx we would have
AALLLLC0xxxxxxx if the table was created with MariaDB 10.2.2
to 10.2.6. (AA=ATOMIC_WRITES, LLLL=PAGE_COMPRESSION_LEVEL,
C=PAGE_COMPRESSED, xxxxxxx=7 bits that were not moved.)
PAGE_COMPRESSED=NO implies LLLLC=00000. That is not a problem.
If someone created a table in MariaDB 10.2.2 or 10.2.3 with
the attribute ATOMIC_WRITES=OFF (value 2; AA=10) and without
PAGE_COMPRESSED=YES or PAGE_COMPRESSION_LEVEL, the table should be
rejected. We ignore this problem, because it should be unlikely
for anyone to specify ATOMIC_WRITES=OFF, and because 10.2.2 and
10.2.2 were not mature releases. The value ATOMIC_WRITES=ON (1)
would be interpreted as ATOMIC_WRITES=OFF, but starting with
MariaDB 10.2.4 the ATOMIC_WRITES attribute is ignored.
PAGE_COMPRESSED=YES implies that PAGE_COMPRESSION_LEVEL be between
1 and 9 and that ROW_FORMAT be COMPACT or DYNAMIC. Thus, the affected
wrong bit pattern in SYS_TABLES.TYPE is of the form AALLLL10DB00001
where D signals the presence of a DATA DIRECTORY attribute and B is 1
for ROW_FORMAT=DYNAMIC and 0 for ROW_FORMAT=COMPACT. We must interpret
this bit pattern as AALLLL1DB00001 (discarding the extraneous 0 bit).
dict_sys_tables_rec_read(): Adjust the affected bit pattern when
reading the SYS_TABLES.TYPE column. In case of invalid flags,
report both SYS_TABLES.TYPE (after possible adjustment) and
SYS_TABLES.MIX_LEN.
dict_load_table_one(): Replace an unreachable condition on
!dict_tf2_is_valid() with a debug assertion. The flags will already
have been validated by dict_sys_tables_rec_read(); if that validation
fails, dict_load_table_low() will have failed.
fil_ibd_create(): Shorten an error message about a file pre-existing.
Datafile::validate_to_dd(): Clarify an error message about tablespace
flags mismatch.
ha_innobase::open(): Remove an unnecessary warning message.
dict_tf_is_valid(): Simplify and stricten the logic. Validate the
values of PAGE_COMPRESSION. Remove error log output; let the callers
handle that.
DICT_TF_BITS: Remove ATOMIC_WRITES, PAGE_ENCRYPTION, PAGE_ENCRYPTION_KEY.
The ATOMIC_WRITES is ignored once the SYS_TABLES.TYPE has been validated;
there is no need to store it in dict_table_t::flags. The PAGE_ENCRYPTION
and PAGE_ENCRYPTION_KEY are unused since MariaDB 10.1.4 (the GA release
was 10.1.8).
DICT_TF_BIT_MASK: Remove (unused).
FSP_FLAGS_MEM_ATOMIC_WRITES: Remove (the flags are never read).
row_import_read_v1(): Display an error if dict_tf_is_valid() fails.
dict_table_t::thd: Remove. This was only used by btr_root_block_get()
for reporting decryption failures, and it was only assigned by
ha_innobase::open(), and never cleared. This could mean that if a
connection is closed, the pointer would become stale, and the server
could crash while trying to report the error. It could also mean
that an error is being reported to the wrong client. It is better
to use current_thd in this case, even though it could mean that if
the code is invoked from an InnoDB background operation, there would
be no connection to which to send the error message.
Remove dict_table_t::crypt_data and dict_table_t::page_0_read.
These fields were never read.
fil_open_single_table_tablespace(): Remove the parameter "table".
innodb.row_format_redundant: Really corrupt the SYS_TABLES.MIX_LEN,
and do not use any debug instrumentation. For tables created in the
system tablespace, the contents of the column will be ignored.
Only the table t1 will refuse to load.
dict_load_table_one(): Remove the DBUG_EXECUTE_IF instrumentation.
Omit a redundant error message "incorrect flags in SYS_TABLES".
dict_sys_tables_rec_read(): Partially revert the Oracle Bug#21644827
fix, and always report errors by the return value.
fts_create_in_mem_aux_table(): Do not rely on dict_table_t::flags2,
but instead evaluate the tablespace ID.
DICT_TF2_BITS: Reduce to the correct value of 7. The two extra
high-order bits were specific to MySQL 5.7.
Cover innodb.table_flags with the new innodb_page_size.combinations
32k and 64k.
dict_sys_tables_type_validate(): Remove an assertion that made a
check in the function redundant. Remove the excessive output to
the error log, as the invalid SYS_TABLES.TYPE value is already being
output.
srv_start_state_t: Document the flags. Replace SRV_START_STATE_STAT
with SRV_START_STATE_REDO. The srv_bg_undo_sources replaces the
original use of SRV_START_STATE_STAT.
dict_stats_thread_started, buf_dump_thread_started,
buf_flush_page_cleaner_thread_started: Remove (unused).
srv_shutdown_all_bg_threads(): Always wait for the I/O threads
to exit, also in read-only mode.
os_thread_free(): Remove.
When a slow shutdown is performed soon after spawning some work for
background threads that can create or commit transactions, it is possible
that new transactions are started or committed after the purge has finished.
This is violating the specification of innodb_fast_shutdown=0, namely that
the purge must be completed. (None of the history of the recent transactions
would be purged.)
Also, it is possible that the purge threads would exit in slow shutdown
while there exist active transactions, such as recovered incomplete
transactions that are being rolled back. Thus, the slow shutdown could
fail to purge some undo log that becomes purgeable after the transaction
commit or rollback.
srv_undo_sources: A flag that indicates if undo log can be generated
or the persistent, whether by background threads or by user SQL.
Even when this flag is clear, active transactions that already exist
in the system may be committed or rolled back.
innodb_shutdown(): Renamed from innobase_shutdown_for_mysql().
Do not return an error code; the operation never fails.
Clear the srv_undo_sources flag, and also ensure that the background
DROP TABLE queue is empty.
srv_purge_should_exit(): Do not allow the purge to exit if
srv_undo_sources are active or the background DROP TABLE queue is not
empty, or in slow shutdown, if any active transactions exist
(and are being rolled back).
srv_purge_coordinator_thread(): Remove some previous workarounds
for this bug.
innobase_start_or_create_for_mysql(): Set buf_page_cleaner_is_active
and srv_dict_stats_thread_active directly. Set srv_undo_sources before
starting the purge subsystem, to prevent immediate shutdown of the purge.
Create dict_stats_thread and fts_optimize_thread immediately
after setting srv_undo_sources, so that shutdown can use this flag to
determine if these subsystems were started.
dict_stats_shutdown(): Shut down dict_stats_thread. Backported from 10.2.
srv_shutdown_table_bg_threads(): Remove (unused).
Problem appears to be that the function fsp_flags_try_adjust()
is being unconditionally invoked on every .ibd file on startup.
Based on performance investigation also the top function
fsp_header_get_crypt_offset() needs to addressed.
Ported implementation of fsp_header_get_encryption_offset()
function from 10.2 to fsp_header_get_crypt_offset().
Introduced a new function fil_crypt_read_crypt_data()
to read page 0 if it is not yet read.
fil_crypt_find_space_to_rotate(): Now that page 0 for every .ibd
file is not read on startup we need to check has page 0 read
from space that we investigate for key rotation, if it is not read
we read it.
fil_space_crypt_get_status(): Now that page 0 for every .ibd
file is not read on startup here also we need to read page 0
if it is not yet read it. This is needed
as tests use IS query to wait until background encryption
or decryption has finished and this function is used to
produce results.
fil_crypt_thread(): Add is_stopping condition for tablespace
so that we do not rotate pages if usage of tablespace should
be stopped. This was needed for failure seen on regression
testing.
fil_space_create: Remove page_0_crypt_read and extra
unnecessary info output.
fil_open_single_table_tablespace(): We call fsp_flags_try_adjust
only when when no errors has happened and server was not started
on read only mode and tablespace validation was requested or
flags contain other table options except low order bits to
FSP_FLAGS_POS_PAGE_SSIZE position.
fil_space_t::page_0_crypt_read removed.
Added test case innodb-first-page-read to test startup when
encryption is on and when encryption is off to check that not
for all tables page 0 is read on startup.
The doublewrite buffer pages must fit in the first InnoDB system
tablespace data file. The checks that were added in the initial patch
(commit 112b21da37)
were at too high level and did not cover all cases.
innodb.log_data_file_size: Test all innodb_page_size combinations.
fsp_header_init(): Never return an error. Move the change buffer creation
to the only caller that needs to do it.
btr_create(): Clean up the logic. Remove the error log messages.
buf_dblwr_create(): Try to return an error on non-fatal failure.
Check that the first data file is big enough for creating the
doublewrite buffers.
buf_dblwr_process(): Check if the doublewrite buffer is available.
Display the message only if it is available.
recv_recovery_from_checkpoint_start_func(): Remove a redundant message
about FIL_PAGE_FILE_FLUSH_LSN mismatch when crash recovery has already
been initiated.
fil_report_invalid_page_access(): Simplify the message.
fseg_create_general(): Do not emit messages to the error log.
innobase_init(): Revert the changes.
trx_rseg_create(): Refactor (no functional change).
InnoDB never supported more than one copy of a redo log.
There were provisions to do that. For Mariabackup, let us clean up
this code.
log_sys_init(): Renamed from log_init().
log_set_capacity(): Renamed from log_calc_max_ages().
log_init(): Renamed from log_group_init(). Remove the parameters
id, space_id. Let the caller invoke log_set_capacity() when needed.
log_group_t: Remove id, space_id, log_groups.
log_t: Replace log_groups with a single log.
recv_find_max_checkpoint(): Declare globally. Remove the first parameter.
xtrabackup_choose_lsn_offset(): Remove (dead code).
Problem was that all doublewrite buffer pages must fit to first
system datafile.
Ported commit 27a34df7882b1f8ed283f22bf83e8bfc523cbfde
Author: Shaohua Wang <shaohua.wang@oracle.com>
Date: Wed Aug 12 15:55:19 2015 +0800
BUG#21551464 - SEGFAULT WHILE INITIALIZING DATABASE WHEN
INNODB_DATA_FILE SIZE IS SMALL
To 10.1 (with extended error printout).
btr_create(): If ibuf header page allocation fails report error and
return FIL_NULL. Similarly if root page allocation fails return a error.
dict_build_table_def_step: If fsp_header_init fails return
error code.
fsp_header_init: returns true if header initialization succeeds
and false if not.
fseg_create_general: report error if segment or page allocation fails.
innobase_init: If first datafile is smaller than 3M and could not
contain all doublewrite buffer pages report error and fail to
initialize InnoDB plugin.
row_truncate_table_for_mysql: report error if fsp header init
fails.
srv_init_abort: New function to report database initialization errors.
srv_undo_tablespaces_init, innobase_start_or_create_for_mysql: If
database initialization fails report error and abort.
trx_rseg_create: If segment header creation fails return.
Problem was that FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION field that for
encrypted pages even in system datafiles should contain key_version
except very first page (0:0) is after encryption overwritten with
flush lsn.
Ported WL#7990 Repurpose FIL_PAGE_FLUSH_LSN to 10.1
The field FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION is consulted during
InnoDB startup.
At startup, InnoDB reads the FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
from the first page of each file in the InnoDB system tablespace.
If there are multiple files, the minimum and maximum LSN can differ.
These numbers are passed to InnoDB startup.
Having the number in other files than the first file of the InnoDB
system tablespace is not providing much additional value. It is
conflicting with other use of the field, such as on InnoDB R-tree
index pages and encryption key_version.
This worklog will stop writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION to
other files than the first file of the InnoDB system tablespace
(page number 0:0) when system tablespace is encrypted. If tablespace
is not encrypted we continue writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
to all first pages of system tablespace to avoid unnecessary
warnings on downgrade.
open_or_create_data_files(): pass only one flushed_lsn parameter
xb_load_tablespaces(): pass only one flushed_lsn parameter.
buf_page_create(): Improve comment about where
FIL_PAGE_FIL_FLUSH_LSN_OR_KEY_VERSION is set.
fil_write_flushed_lsn(): A new function, merged from
fil_write_lsn_and_arch_no_to_file() and
fil_write_flushed_lsn_to_data_files().
Only write to the first page of the system tablespace (page 0:0)
if tablespace is encrypted, or write all first pages of system
tablespace and invoke fil_flush_file_spaces(FIL_TYPE_TABLESPACE)
afterwards.
fil_read_first_page(): read flush_lsn and crypt_data only from
first datafile.
fil_open_single_table_tablespace(): Remove output of LSN, because it
was only valid for the system tablespace and the undo tablespaces, not
user tablespaces.
fil_validate_single_table_tablespace(): Remove output of LSN.
checkpoint_now_set(): Use fil_write_flushed_lsn and output
a error if operation fails.
Remove lsn variable from fsp_open_info.
recv_recovery_from_checkpoint_start(): Remove unnecessary second
flush_lsn parameter.
log_empty_and_mark_files_at_shutdown(): Use fil_writte_flushed_lsn
and output error if it fails.
open_or_create_data_files(): Pass only one flushed_lsn variable.
When MySQL 5.7 introduced fulltext parser plugins to InnoDB,
it hard-coded the plugin name "ngram" to mean something special.
Because -fsanitize=undefined was issuing warnings for the
assignment in row_merge_create_index() that the value is out of
range for Boolean, we remove this code that was not intended to
be used in MariaDB 10.2.
fts_check_token(): Remove the special logic for N-gram tokens.
Remove a bogus reference to gb18030_chinese_ci, which was introduced
in MySQL 5.7. It is roughly equivalent to utf8mb4_unicode_ci, just
using a different internal encoding, and different collation.
btr_defragment_thread(): Create the thread in the same place as other
threads. Do not invoke btr_defragment_shutdown(), because
row_drop_tables_for_mysql_in_background() in the master thread can still
keep invoking btr_defragment_remove_table().
logs_empty_and_mark_files_at_shutdown(): Wait for btr_defragment_thread()
to exit.
innobase_start_or_create_for_mysql(), innobase_shutdown_for_mysql():
Skip encryption and scrubbing in innodb_read_only_mode.
srv_export_innodb_status(): Do not export encryption or scrubbing
statistics in innodb_read_only mode, because the threads will not
be running.
