There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.
mysql-test/r/sp.result:
test case
mysql-test/t/sp.test:
test case
sql/sql_base.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_insert.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_prepare.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_select.cc:
THD::used_tables is replaced with LEX::used_tables
The problem is that TIME_FUZZY_DATE is explicitly used for get_arg0_date()
function in Item_date_typecast::get_date method. The fix is to use real
fuzzy_date value.
mysql-test/r/func_time.result:
test case
mysql-test/t/func_time.test:
test case
sql/item_timefunc.cc:
use real fuzzy_date value
WITH UTF32
The 5.5 version of the UTF32 collation was not enforcing the BMP range that
it currently supports when comparing with LIKE.
Fixed by backporting the checks for the BMP from trunk.
Added a named constant for the maximum character that can have a weight
in the weight table.
SHOW ALL PROBLEMS FOR MERGE TABLE COMPLIANCE IN 5.1".
The problem was that CHECK/REPAIR TABLE for a MERGE table which
had several children missing or in wrong engine reported only
issue with the first such table in its result-set. While in 5.0
this statement returned the whole list of problematic tables.
Ability to report problems for all children was lost during
significant refactorings of MERGE code which were done as part
of work on 5.1 and 5.5 releases.
This patch restores status quo ante refactorings by changing
code in such a way that:
1) Failure to open child table due to its absence during CHECK/
REPAIR TABLE for a MERGE table is not reported immediately
when its absence is discovered in open_tables(). Instead
handling/error reporting in such a situation is postponed
until the moment when children are attached.
2) Code performing attaching of children no longer stops when
it encounters first problem with one of the children during
CHECK/REPAIR TABLE. Instead it continues iteration through
the child list until all problems caused by child absence/
wrong engine are reported.
Note that even after this change problem with mismatch of
child/parent definition won't be reported if there is also
another child missing, but this is how it was in 5.0 as well.
mysql-test/r/merge.result:
Added test case for bug #11754210 - "45777: CHECK TABLE DOESN'T
SHOW ALL PROBLEMS FOR MERGE TABLE COMPLIANCE IN 5.1".
Adjusted results of existing tests to the fact that CHECK/REPAIR
TABLE statements now try to report problems about missing table/
wrong engine for all underlying tables, and to the fact that
mismatch of parent/child definitions is always reported as an
error and not a warning.
mysql-test/t/merge.test:
Added test case for bug #11754210 - "45777: CHECK TABLE DOESN'T
SHOW ALL PROBLEMS FOR MERGE TABLE COMPLIANCE IN 5.1".
sql/sql_base.cc:
Changed code responsible for opening tables to ignore the fact
that underlying tables of a MERGE table are missing, if this
table is opened for CHECK/REPAIR TABLE.
The absence of underlying tables in this case is now detected and
appropriate error is reported at the point when child tables are
attached. At this point we can produce full list of problematic
child tables/errors to be returned as part of CHECK/REPAIR TABLE
result-set.
storage/myisammrg/ha_myisammrg.cc:
Changed myisammrg_attach_children_callback() to handle new
situation, when during CHECK/REPAIR TABLE we do not report
error about missing child immediately when this fact is
discovered during open_tables() but postpone error-reporting
till the time when children are attached.
Also this callback is now responsible for pushing an error
mentioning problematic child table to the list of errors to
be reported by CHECK/REPAIR TABLE statements.
Finally, since now myrg_attach_children() no longer relies on
return value from callback to determine the end of the children
list, callback no longer needs to set my_errno value and can
be simplified.
Changed myrg_print_wrong_table() to always report a problem
with child table as an error and not as a warning. This makes
reporting for different types of issues with child tables
more consistent and compatible with 5.0 behavior.
storage/myisammrg/myrg_open.c:
Changed code in myrg_attach_children() not to abort on the
first problem with a child table when attaching children to
parent MERGE table during CHECK/REPAIR TABLE statement
execution. This allows CHECK/REPAIR TABLE to report problems
about absence/wrong engine for all underlying tables as
part of their result-set.
mysql-test/t/implicit_commit.test:
Test fails if server is compiled with -DENABLED_PROFILING=0
sql/sql_class.cc:
Let class PROFILING do its own handling of the input file name.
sql/sql_profile.cc:
Store only basename of file argument.
Patch fixes an issue with reading basedir on Windows. It fixes how
the code interprets opt_basedir on Windows by adding the correct
path separators and quotes for paths with spaces.
BUG#12664302 : mysql_plugin cannot recognize the plugin config file
Patch fixes an issue with reading a plugin config file. It adds
more information to the error messages to ensure the user is
using the options correctly. Also deals with paths with spacs on
Windows.
This patch changes the plugin configuration file format to make it
easier to add new plugins and remove complexity. It also adds more
information when plugin configuration file reads fail.
This patch adds a new client utility that enables or disables plugin
features. The utility disables or enables a plugin using values (name,
soname, and symbols) provided via a configuration file by the same name.
For example, to ENABLE the daemon_example plugin, the utility will read
the daemon_example.ini configuration file and use the values contained to
enable or disable the plugin.
Before BUG#28796, an empty host was used to identify that an instance was no
longer a slave. However, BUG#28796 changed this behavior and one cannot set
an empty host. Besides, a RESET SLAVE only cleans up information on the next
event to retrieve from the master, disables ssl and resets heartbeat period.
So a call to SHOW SLAVE STATUS after issuing a RESET SLAVE still returns some
valid information, such as host, port, user and password.
To fix this problem, we have introduced the command RESET SLAVE ALL that does
what a regular RESET SLAVE does and also clears host, port, user and password
information thus allowing users to identify when an instance is no longer a
slave.
Truncate result of decimal division before converting to integer.
mysql-test/r/func_math.result:
New test case.
mysql-test/t/func_math.test:
New test case.
sql/item_func.cc:
Item_func_int_div::val_int():
Truncate result of decimal division before converting to integer.
mysql-test/r/type_float.result:
New test case.
mysql-test/t/type_float.test:
New test case.
sql/item_strfunc.cc:
There was a buffer over/under-run when inserting decimal point into an empty string.
Turns out the DBUG_ASSERT added by fix for Bug#11792200 was overly pessimistic:
'stop0' is used in the main loop of do_div_mod, but we only dereference 'buf0'
for div operations, not for mod.
mysql-test/r/func_math.result:
New test case.
mysql-test/t/func_math.test:
New test case.
strings/decimal.c:
Move DBUG_ASSERT down to where we actually dereference the loop pointer.
The buffer was simply too small.
In 5.5 and trunk, the size is 311 + 31,
in 5.1 and below, the size is 331
client/sql_string.cc:
Increase buffer size in String::set(double, ...)
include/m_string.h:
Increase FLOATING_POINT_BUFFER
mysql-test/r/type_float.result:
New test cases.
mysql-test/t/type_float.test:
New test cases.
sql/sql_string.cc:
Increase buffer size in String::set(double, ...)
sql/unireg.h:
Move definition of FLOATING_POINT_BUFFER
non-latin1 server error message
The problem was a one byte buffer overflow in the conversion
of a error message between character sets. Ahead of explaining
the problem further, some background information. Before an
error message is sent to the user, the message is converted
to the character set specified in the character_set_results
variable. For various reasons, this conversion might cause
the message to increase in length -- for example, if certain
characters can't be represented in the result character set.
If the final message length is greater than the maximum allowed
length of a error message (MYSQL_ERRMSG_SIZE), the message
is truncated. The message is also always null-terminated
regardless of the character set. The problem arises from this
null-termination. If a message length reached the maximum,
the terminating null character would be placed one byte past
the end of the message buffer.
The solution is to reserve the end of the message buffer for
the null character.
mysql-test/t/ctype_errors.test:
Add test case for Bug#12736295.
sql/sql_error.cc:
The to_end pointer was actually pointing past the end of
the buffer. Since the message is always null terminated,
point to_end to the last position of the buffer.
The server crashes if it processes table map events that are
corrupted, especially if they map different tables to the same
identifier. This could happen, for instance, due to BUG 56226.
We fix this by checking whether the table map has already been
mapped before actually applying the event. If it has been mapped
with different settings an error is raised and the slave SQL
thread stops. If it has been mapped with same settings the event
is skipped. If the table is set to be ignored by the filtering
rules, there is no change in behavior: the event is skipped and
ids are not checked.
mysql-test/suite/rpl/t/rpl_row_corruption.test:
Added a simple test case that checks both cases:
- multiple table maps with the same identifier
- multiple table maps with the same identifier, but only one
is processed (the others are filtered out)
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
mysql-test/r/sp_trans.result:
results!
mysql-test/t/sp_trans.test:
Show that CREATE TABLE (called from store routine) heeds
any changes after CREATE SP / parse-time. Show that explicitly
requesting an ENGINE still works.
sql/sql_parse.cc:
If no ENGINE=... was given at parse-time, determine default
engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
If CREATE TABLE is not given ENGINE=..., don't bother
figuring out the default engine during parsing; we'll
do it at execution time instead to be aware of the
latest updates.
We must allocate a larger ref_pointer_array. We failed to account for extra
items allocated here:
#0 find_order_in_list
uint el= all_fields.elements;
all_fields.push_front(order_item); /* Add new field to field list. */
ref_pointer_array[el]= order_item;
order->item= ref_pointer_array + el;
#1 setup_order
#2 setup_without_group
#3 JOIN::prepare
mysql-test/r/order_by.result:
New test case.
mysql-test/r/union.result:
New test case.
mysql-test/t/order_by.test:
New test case.
mysql-test/t/union.test:
New test case.
sql/sql_lex.cc:
find_order_in_list() may need some extra space, so multiply og_num by two.
sql/sql_union.cc:
For UNION, the 'n_sum_items' are accumulated in the "global_parameters" select_lex.
This number must be propagated to setup_ref_array()
When preparing a 'fake_select_lex' we need to use global_parameters->order_list
rather than fake_select_lex->order_list (see comments inside st_select_lex_unit::cleanup)
Bug#12637786 was fixed with rb:692 by marko. But that fix has a remaining
bug. It added this assert;
ut_ad(ind_field->prefix_len);
before a section of code that assumes there is a prefix_len.
The patch replaced code that explicitly avoided this with a check for
prefix_len. It turns out that the purge thread can get to that assert
without a prefix_len because it does not use a row_ext_t* .
When UNIV_DEBUG is not defined, the affect of this is that the purge thread
sets the dfield->len to zero and then cannot find the entry in the index to
purge. So secondary index entries remain unpurged.
This patch does not do the assert. Instead, it uses
'if (ind_field->prefix_len) {...}'
around the section of code that assumes a prefix_len. This is the way the
patch I provided to Marko did it.
The test case is simply modified to do a sleep(10) in order to give the
purge thread a chance to run. Without the code change to row0row.c, this
modified testcase will assert if InnoDB was compiled with UNIV_DEBUG.
I tried to sleep(5), but it did not always assert.
bug. It added this assert;
ut_ad(ind_field->prefix_len);
before a section of code that assumes there is a prefix_len.
The patch replaced code that explicitly avoided this with a check for
prefix_len. It turns out that the purge thread can get to that assert
without a prefix_len because it does not use a row_ext_t* .
When UNIV_DEBUG is not defined, the affect of this is that the purge thread
sets the dfield->len to zero and then cannot find the entry in the index to
purge. So secondary index entries remain unpurged.
This patch does not do the assert. Instead, it uses
'if (ind_field->prefix_len) {...}'
around the section of code that assumes a prefix_len. This is the way the
patch I provided to Marko did it.
The test case is simply modified to do a sleep(10) in order to give the
purge thread a chance to run. Without the code change to row0row.c, this
modified testcase will assert if InnoDB was compiled with UNIV_DEBUG.
I tried to sleep(5), but it did not always assert.
