Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
work in 5.1.40)
MERGE engine fails to open child table from a different
database if child table/database name contains characters
that are subject for table name to filename encoding
(WL1324).
Another problem is that MERGE engine didn't properly open
child table from the same database if child table name
contains characters like '/', '#'.
The problem was that table name to file name encoding was
applied inconsistently:
* On CREATE: encode table name + database name if child
table is in different database; do not encode table
name if child table is in the same database;
* No decoding on open.
With this fix child table/database names are always
encoded on CREATE and decoded on open. Compatibility
with older tables preserved.
Along with this patch comes fix for SHOW CREATE TABLE,
which used to show child table/database path instead
of child table/database names.
and base tables
myrg_attach_children() could reuse a buffer that was allocated
previously based on a definition of a child table. The problem
was that the child's definition might have been changed, so
reusing the buffer could lead to crashes or valgrind errors
under some circumstances.
Fixed by changing myrg_attach_children() so that the
rec_per_key_part buffer is reused only when the child table
have not changed, and reallocated otherwise (the old buffer is
deallocated if necessary).
A Query in the MyISAM merge table was crashing
if the index merge algorithm was being used
Index Merge optimization requires the reading of
multiple indexes at the same time. Reading multiple
indexes at once with current SE API means that we
need to have handler instance for each to-be-read
index. This is done by creating clones of the handlers
instances. The clone internally does a open of the handler.
The open for a MERGE engine is handled in the following
phases
1) open parent table
2) generate list of underlying
table
3) attach underlying tables
But the current implementation does only the first
phase (i.e.) open parent table.
The current patch fixes this at the MERGE engine level,
by handling the clone operation within the MERGE engine
rather than in the storage engine API. It opens and
attaches the MyISAM tables on the MyISAM storage engine
interface directly within the MERGE engine. The new MyISAM
table instances, as well as the MERGE clone itself, are not
visible in the table cache. This is not a problem because
all locking is handled by the original MERGE table from which
this is cloned of.
Every subsequent query to a merge table with indexes was lowering
down cardinality.
The problem was that key statistics was not cleared when merge
children were detached. Causing next attach children perform
incremental key statistics calculation.
Fixed by clearing key statistics when attaching first child.
The patch for Bug 26379 (Combination of FLUSH TABLE and
REPAIR TABLE corrupts a MERGE table) fixed this bug too.
However it revealed a new bug that crashed the server.
Flushing a merge table at the moment when it is between open
and attach of children crashed the server.
The flushing thread wants to abort locks on the flushed table.
It calls ha_myisammrg::lock_count() and ha_myisammrg::store_lock()
on the TABLE object of the other thread.
Changed ha_myisammrg::lock_count() and ha_myisammrg::store_lock()
to accept non-attached children. ha_myisammrg::lock_count() returns
the number of MyISAM tables in the MERGE table so that the memory
allocation done by get_lock_data() is done correctly, even if the
children become attached before ha_myisammrg::store_lock() is
called. ha_myisammrg::store_lock() will not return any lock if the
children are not attached.
This is however a change in the handler interface. lock_count()
can now return a higher number than store_lock() stores locks.
This is more safe than the reverse implementation would be.
get_lock_data() in the SQL layer is adjusted accordingly. It sets
MYSQL_LOCK::lock_count based on the number of locks returned by
the handler::store_lock() calls, not based on the numbers returned
by the handler::lock_count() calls. The latter are only used for
allocation of memory now.
No test case. The test suite cannot reliably run FLUSH between
lock_count() and store_lock() of another thread. The bug report
contains a program that can repeat the problem with some
probability.
corrupts a MERGE table
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Bug 25038 - Waiting TRUNCATE
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Bug 19627 - temporary merge table locking
Bug 27660 - Falcon: merge table possible
Bug 30273 - merge tables: Can't lock file (errno: 155)
The problems were:
Bug 26379 - Combination of FLUSH TABLE and REPAIR TABLE
corrupts a MERGE table
1. A thread trying to lock a MERGE table performs busy waiting while
REPAIR TABLE or a similar table administration task is ongoing on
one or more of its MyISAM tables.
2. A thread trying to lock a MERGE table performs busy waiting until all
threads that did REPAIR TABLE or similar table administration tasks
on one or more of its MyISAM tables in LOCK TABLES segments do UNLOCK
TABLES. The difference against problem #1 is that the busy waiting
takes place *after* the administration task. It is terminated by
UNLOCK TABLES only.
3. Two FLUSH TABLES within a LOCK TABLES segment can invalidate the
lock. This does *not* require a MERGE table. The first FLUSH TABLES
can be replaced by any statement that requires other threads to
reopen the table. In 5.0 and 5.1 a single FLUSH TABLES can provoke
the problem.
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Trying DML on a MERGE table, which has a child locked and
repaired by another thread, made an infinite loop in the server.
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Locking a MERGE table and its children in parent-child order
and flushing the child deadlocked the server.
Bug 25038 - Waiting TRUNCATE
Truncating a MERGE child, while the MERGE table was in use,
let the truncate fail instead of waiting for the table to
become free.
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Repairing a child of an open MERGE table corrupted the child.
It was necessary to FLUSH the child first.
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Flushing and optimizing locked MERGE children crashed the server.
Bug 19627 - temporary merge table locking
Use of a temporary MERGE table with non-temporary children
could corrupt the children.
Temporary tables are never locked. So we do now prohibit
non-temporary chidlren of a temporary MERGE table.
Bug 27660 - Falcon: merge table possible
It was possible to create a MERGE table with non-MyISAM children.
Bug 30273 - merge tables: Can't lock file (errno: 155)
This was a Windows-only bug. Table administration statements
sometimes failed with "Can't lock file (errno: 155)".
These bugs are fixed by a new implementation of MERGE table open.
When opening a MERGE table in open_tables() we do now add the
child tables to the list of tables to be opened by open_tables()
(the "query_list"). The children are not opened in the handler at
this stage.
After opening the parent, open_tables() opens each child from the
now extended query_list. When the last child is opened, we remove
the children from the query_list again and attach the children to
the parent. This behaves similar to the old open. However it does
not open the MyISAM tables directly, but grabs them from the already
open children.
When closing a MERGE table in close_thread_table() we detach the
children only. Closing of the children is done implicitly because
they are in thd->open_tables.
For more detail see the comment at the top of ha_myisammrg.cc.
Changed from open_ltable() to open_and_lock_tables() in all places
that can be relevant for MERGE tables. The latter can handle tables
added to the list on the fly. When open_ltable() was used in a loop
over a list of tables, the list must be temporarily terminated
after every table for open_and_lock_tables().
table_list->required_type is set to FRMTYPE_TABLE to avoid open of
special tables. Handling of derived tables is suppressed.
These details are handled by the new function
open_n_lock_single_table(), which has nearly the same signature as
open_ltable() and can replace it in most cases.
In reopen_tables() some of the tables open by a thread can be
closed and reopened. When a MERGE child is affected, the parent
must be closed and reopened too. Closing of the parent is forced
before the first child is closed. Reopen happens in the order of
thd->open_tables. MERGE parents do not attach their children
automatically at open. This is done after all tables are reopened.
So all children are open when attaching them.
Special lock handling like mysql_lock_abort() or mysql_lock_remove()
needs to be suppressed for MERGE children or forwarded to the parent.
This depends on the situation. In loops over all open tables one
suppresses child lock handling. When a single table is touched,
forwarding is done.
Behavioral changes:
===================
This patch changes the behavior of temporary MERGE tables.
Temporary MERGE must have temporary children.
The old behavior was wrong. A temporary table is not locked. Hence
even non-temporary children were not locked. See
Bug 19627 - temporary merge table locking.
You cannot change the union list of a non-temporary MERGE table
when LOCK TABLES is in effect. The following does *not* work:
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ...;
LOCK TABLES t1 WRITE, t2 WRITE, m1 WRITE;
ALTER TABLE m1 ... UNION=(t1,t2) ...;
However, you can do this with a temporary MERGE table.
You cannot create a MERGE table with CREATE ... SELECT, neither
as a temporary MERGE table, nor as a non-temporary MERGE table.
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ... SELECT ...;
Gives error message: table is not BASE TABLE.
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
- Encoding itself, implemented as a charset
"filename". Originally planned to use '.'
as an escape character, but now changed to '@'
for two reasons: "ls" does not return
file names starting with '.' considering them
as a kind of hidden files; some platforms
do not allow several dots in a file name.
- replacing many calls of my_snprintf() and
strnxmov() to the new build_table_filename().
- Adding MY_APPEND_EXT mysys flag, to append
an extention rather that replace it.
- Replacing all numeric constants in fn_format
flag arguments to their mysys definitions, e.g.
MY_UNPACK_FILENAME,
- Predictability in several function/methods:
when a table name can appear with or withot .frm
extension. Some functions/methods were changed
so accept names strictly with .frm, other - strictly
without .frm extensions. Several DBUG_ASSERTs were
added to check whether an extension is passed.
Many files:
table name to file name encoding
mysql_priv.h:
Prototypes for new table name encoding tools.
ctype-utf8.c:
Implementing "filename" charset for
table name to file name encoding.
row0mysql.c:
Fixing table name prefix.
mf_format.c:
Adding MY_APPEND_EXT processing.
Many files:
Fixing tests.
my_sys.h:
Adding new flag to append rather than replace an extension.
m_ctype.h:
Adding "filename" charset definition.
