bitmap_is_set(table->read_set, field_index))
UPDATE on an InnoDB table modifying the same index that is used
to satisfy the WHERE condition could trigger a debug assertion
under some circumstances.
Since for engines with the HA_PRIMARY_KEY_IN_READ_INDEX flag
set results of an index scan on a secondary index are appended
by the primary key value, if a query involves only columns from
the primary key and a secondary index, the latter is considered
to be covering.
That tricks mysql_update() to mark for reading only columns
from the secondary index when it does an index scan to retrieve
rows to update in case a part of that key is also being
updated. However, there may be other columns in WHERE that are
part of the primary key, but not the secondary one.
What we actually want to do in this case is to add index
columns to the existing WHERE columns bitmap rather than
replace it.
mysql-test/r/innodb_mysql.result:
Test case for bug #53830.
mysql-test/t/innodb_mysql.test:
Test case for bug #53830.
sql/sql_update.cc:
Add index columns to the read_set bitmap, don't replace it.
sql/table.cc:
Added a new add_read_columns_used_by_index() function to
st_table.
sql/table.h:
Added a new add_read_columns_used_by_index() function to
st_table.
in mysql-trunk-merge).
There were two problems:
- a mistake during merge of a patch for Bug 52629 from 5.1;
- MTR treated auxilary output of newer valgrind as an error.
The fixes are:
- Fix merge error;
- Teach MTR to skip 'HEAP summary' section of valgrind output.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules (the check_table_name function call
has been reused).
mysql-test/r/renamedb.result:
Updated test case.
mysql-test/r/upgrade.result:
Test case for bug #53804.
mysql-test/t/renamedb.test:
Updated test case.
mysql-test/t/upgrade.test:
Test case for bug #53804.
sql/mysql_priv.h:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
The check_mysql50_prefix has been added.
sql/sql_table.cc:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
- The check_mysql50_prefix has been added.
- The check_n_cut_mysql50_prefix function has been refactored
to share code with new check_mysql50_prefix function.
sql/table.cc:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules.
Problem: The test case mysqldump reads a file that must
be world-readable. The test did not force the file to be
world-readable, so if the tree was branched with a umask
of 0077, the test would fail.
Fix: chmod the file.
mysql-test/t/mysqldump.test:
Added chmod so that the file is guaranteed to be world-readable.
Server crashes on 64bit linux with 'double free or corruption'
message, on 32bit mysql-test-run silently fails on bootstrap
stage. The problem is that FreeState() is called twice
for init_settings struct in _db_end_ function.
The fix is to remove superfluous FreeState() call.
Additional fix:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
dbug/dbug.c:
The problem is that FreeState() is called twice
for init_settings struct in _db_end_ function.
The fix is to remove superfluous FreeState() call.
mysql-test/r/variables_debug.result:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
mysql-test/t/variables_debug.test:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
sql/set_var.cc:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
(make relies GNU extentions). The patch was partially
backport from 6.0.
Original comment:
bug#30708: make relies GNU extensions. Now that we no longer use
BitKeeper we can safely remove the SCCS handling with no loss of
functionality.
Bug #50087 Interval arithmetic for Event_queue_element is not portable.
Subtraction of two unsigned months yielded a (very large) positive value.
Conversion of this to a signed value was not necessarily well defined.
Solution: do the subtraction on signed values.
mysql-test/r/events_scheduling.result:
Add test case.
mysql-test/t/events_scheduling.test:
Add test case.
sql/event_data_objects.cc:
Convert month to signed before doing the subtraction.
That was a pure test issue -- filter implementation in Perl did not work
on some platform (the bug occurred on Windows Server 2008 with
Cygwin Perl 5.10.0).
Post-fix: Updated a test case after the patch for BUG#50410,
because the patch makes ndb to run in the row format and as
such unsafe warning messages are not printed out.
multiquery packet).
Background:
- a query can contain multiple SQL statements;
- the server frees resources allocated to process a query when the
whole query is handled. In other words, resources allocated to process
one SQL statement from a multi-statement query are freed when all SQL
statements are handled.
The problem was that the parser allocated a buffer of size of the whole
query for each SQL statement in a multi-statement query. Thus, if a query
had many SQL-statements (so, the query was long), but each SQL statement
was short, ther parser tried to allocate huge amount of memory (number of
small SQL statements * length of the whole query).
The memory was allocated for a so-called "cpp buffer", which is intended to
store pre-processed SQL statement -- SQL text without version specific
comments.
The fix is to allocate memory for the "cpp buffer" once for all SQL
statements (once for a query).
ha_myisam::index_first(uchar*)") at assert.c:81
Single-table DELETE crash/assertion similar to single-table
UPDATE bug 14272.
Same resolution as for the bug 14272:
Don't run index scan when we should use quick select.
This could cause failures because there are table handlers (like federated)
that support quick select scanning but do not support index scanning.
mysql-test/r/delete.result:
Test case for bug #53450.
mysql-test/t/delete.test:
Test case for bug #53450.
sql/sql_delete.cc:
Bug #53450: Crash / assertion "virtual int
ha_myisam::index_first(uchar*)") at assert.c:81
The mysql_delete function has been modified to not to use
init_read_record_idx instead of init_read_record for the
quick select.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
sql/protocol.cc:
Fix a typo.
sql/sql_class.h:
- Introduce THD::get_row_count_func() / THD::set_row_count_func();
- Remove the CF_HAS_ROW_COUNT define
sql/sql_parse.cc:
CF_HAS_ROW_COUNT was eliminated.
MTR sporadically reported that rpl_do_grant does not
clean up after itself.
We fix this by backporting BUG 50984 fix. This deploys
missing synchronization between master and slave.
Additionally, it also fixes the check_testcase for
rpl_tmp_table_and_DDL.
NULL from outer join query
Problem: optimising MIN/MAX() queries without GROUP BY clause
by replacing the aggregate expression with a constant, we may set it
to NULL disregarding the fact that there may be outer joins involved.
Fix: don't replace MIN/MAX() with NULL if there're outer joins.
Note: the fix itself is just
- if (!count)
+ if (!count && !outer_tables)
set to NULL
The rest of the patch eliminates repeated code to improve speed
and for easy maintenance of the code.
mysql-test/r/group_by.result:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- test result.
mysql-test/t/group_by.test:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- test case.
sql/opt_sum.cc:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- optimising MIN/MAX() queries without GROUP BY clause by
replacing them with a constant, take into account that
there're may be outer joins involved.
- repeated code for MIN/MAX optimization in the opt_sum_query()
eliminated by introducing new functions that read MIN/MAX values
using index and combining MIN/MAX cases to one.
- Update/fix file layouts for each package type, add new types for
native package formats including deb, rpm and svr4.
- Build all plugins, including debug versions
- Update compiler flags to match current release
- Add missing @VAR@ expansions
- Install correct mysqclient library symlinks
- Fix icc/ia64 builds
- Fix install of libmysqld-debug
- Don't include mysql_embedded
- Remove unpackaged manual pages to avoid missing files warnings
- Don't install mtr's test suite
update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
sql/sql_class.h:
Added more docs for THD::examined_row_count.
sql/sql_delete.cc:
Add incrementing thd->examined_row_count.
sql/sql_update.cc:
Add incrementing thd->examined_row_count.
Problem: The rpl_ndb did not set binlog_format explicitly. Since
the default is binlog_format=statement, it means that the suite
ran with that. ndb does not support binlog_format=statement,
and many tests were skipped because they sourced
include/have_binlog_format_row_or_mixed.inc
Fix: set binlog_format=row explicitly in the configuration file
for the rpl_ndb suite.
Makefile.am:
Removed duplicate run of rpl_ndb suite with binlog_format=row.
Now that rpl_ndb is run with binlog_format=row by default, this
run that explicitly changes to binlog_format=row is not needed,
because it is covered by the following run.
mysql-test/suite/rpl_ndb/my.cnf:
cluster only supports binlog_format=row.
mysql-test/suite/rpl_ndb/r/rpl_ndb_stm_innodb.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_stm_innodb.test:
This test is supposed to use binlog_format=STATEMENT on
master. It uses innodb on master, so statement format is
supported.
remember range endpoints
The Loose Index Scan optimization keeps track of a sequence
of intervals. For the current interval it maintains the
current interval's endpoints. But the maximum endpoint was
not stored in the SQL layer; rather, it relied on the
storage engine to retain this value in-between reads. By
coincidence this holds for MyISAM and InnoDB. Not for the
partitioning engine, however.
Fixed by making the key values iterator
(QUICK_RANGE_SELECT) keep track of the current maximum endpoint.
This is also more efficient as we save a call through the
handler API in case of open-ended intervals.
The code to calculate endpoints was extracted into
separate methods in QUICK_RANGE_SELECT, and it was possible to
get rid of some code duplication as part of fix.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
When using a non-transactional table (t1) on the master
and with autocommit disabled, no COMMIT is recorded
in the binary log ending the statement. Therefore, if
the slave has t1 in a transactional engine, then it will
be as if a transaction is started but never ends. This is
actually BUG#29288 all over again.
We fix this by cherrypicking the cset for BUG#29288 which
was pushed to a later mysql version. The revision picked
was: mats@sun.com-20090923094343-bnheplq8n95opjay .
Additionally, a test case for covering the scenario depicted
in the bug report is included in this cset.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
