on disable_indexes(HA_KEY_SWITCH_NONUNIQ_SAVE) the engine does
not know that the long unique is logically unique, because on the
engine level it is not. And the engine disables it,
Change the disable_indexes/enable_indexes API. Instead of the enum
mode, send a key_map of indexes that should be enabled. This way the
server will decide what is unique, not the engine.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
This includes:
- cleanup and optimization of filtering and pushdown engine code.
- Adjusted costs for rowid filters (based on extensive testing
and profiling).
This made a small two changes to the handler_rowid_filter_is_active()
API:
- One should not call it with a zero pointer!
- One does not need to call handler_rowid_filter_is_active() for every
row anymore. It is enough to check if filter is active by calling it
call it during index_init() or when handler::rowid_filter_changed()
is called
The changes was to avoid unnecessary function calls and checks if
pushdown conditions and rowid_filter is not used.
Updated costs for rowid_filter_lookup() to be closer to reality.
The old cost was based only on rowid_compare_cost. This is now
changed to take into account the overhead in checking the rowid.
Changed the Range_rowid_filter class to use DYNAMIC_ARRAY directly
instead of Dynamic_array<>. This was done to be able to use the new
append_dynamic() functions which gives a notable speed improvment
compared to the old code. Removing the abstraction also makes
the code easier to understand.
The cost of filtering is now slightly lower than before, which
is reflected in some test cases that is now using rowid filters.
The issue was that when limit is used,
SQL_SELECT::test_quick_select would set the cost of table scan to be
unreasonable high to force a range to be used.
The problem with this approach was that range was used even when the
cost of range, when it would only read 'limit rows' would be higher
than the cost of a table scan.
This patch fixes it by not accepting ranges when the range can never
have a lower cost than a table scan, even if every row would match the
WHERE clause.
This makes it easier to compare different costs and also allows
the optimizer to optimizer different storage engines more reliably.
- Added tests/check_costs.pl, a tool to verify optimizer cost calculations.
- Most engine costs has been found with this program. All steps to
calculate the new costs are documented in Docs/optimizer_costs.txt
- User optimizer_cost variables are given in microseconds (as individual
costs can be very small). Internally they are stored in ms.
- Changed DISK_READ_COST (was DISK_SEEK_BASE_COST) from a hard disk cost
(9 ms) to common SSD cost (400MB/sec).
- Removed cost calculations for hard disks (rotation etc).
- Changed the following handler functions to return IO_AND_CPU_COST.
This makes it easy to apply different cost modifiers in ha_..time()
functions for io and cpu costs.
- scan_time()
- rnd_pos_time() & rnd_pos_call_time()
- keyread_time()
- Enhanched keyread_time() to calculate the full cost of reading of a set
of keys with a given number of ranges and optional number of blocks that
need to be accessed.
- Removed read_time() as keyread_time() + rnd_pos_time() can do the same
thing and more.
- Tuned cost for: heap, myisam, Aria, InnoDB, archive and MyRocks.
Used heap table costs for json_table. The rest are using default engine
costs.
- Added the following new optimizer variables:
- optimizer_disk_read_ratio
- optimizer_disk_read_cost
- optimizer_key_lookup_cost
- optimizer_row_lookup_cost
- optimizer_row_next_find_cost
- optimizer_scan_cost
- Moved all engine specific cost to OPTIMIZER_COSTS structure.
- Changed costs to use 'records_out' instead of 'records_read' when
recalculating costs.
- Split optimizer_costs.h to optimizer_costs.h and optimizer_defaults.h.
This allows one to change costs without having to compile a lot of
files.
- Updated costs for filter lookup.
- Use a better cost estimate in best_extension_by_limited_search()
for the sorting cost.
- Fixed previous issues with 'filtered' explain column as we are now
using 'records_out' (min rows seen for table) to calculate filtering.
This greatly simplifies the filtering code in
JOIN_TAB::save_explain_data().
This change caused a lot of queries to be optimized differently than
before, which exposed different issues in the optimizer that needs to
be fixed. These fixes are in the following commits. To not have to
change the same test case over and over again, the changes in the test
cases are done in a single commit after all the critical change sets
are done.
InnoDB changes:
- Updated InnoDB to not divide big range cost with 2.
- Added cost for InnoDB (innobase_update_optimizer_costs()).
- Don't mark clustered primary key with HA_KEYREAD_ONLY. This will
prevent that the optimizer is trying to use index-only scans on
the clustered key.
- Disabled ha_innobase::scan_time() and ha_innobase::read_time() and
ha_innobase::rnd_pos_time() as the default engine cost functions now
works good for InnoDB.
Other things:
- Added --show-query-costs (\Q) option to mysql.cc to show the query
cost after each query (good when working with query costs).
- Extended my_getopt with GET_ADJUSTED_VALUE which allows one to adjust
the value that user is given. This is used to change cost from
microseconds (user input) to milliseconds (what the server is
internally using).
- Added include/my_tracker.h ; Useful include file to quickly test
costs of a function.
- Use handler::set_table() in all places instead of 'table= arg'.
- Added SHOW_OPTIMIZER_COSTS to sys variables. These are input and
shown in microseconds for the user but stored as milliseconds.
This is to make the numbers easier to read for the user (less
pre-zeros). Implemented in 'Sys_var_optimizer_cost' class.
- In test_quick_select() do not use index scans if 'no_keyread' is set
for the table. This is what we do in other places of the server.
- Added THD parameter to Unique::get_use_cost() and
check_index_intersect_extension() and similar functions to be able
to provide costs to called functions.
- Changed 'records' to 'rows' in optimizer_trace.
- Write more information to optimizer_trace.
- Added INDEX_BLOCK_FILL_FACTOR_MUL (4) and INDEX_BLOCK_FILL_FACTOR_DIV (3)
to calculate usage space of keys in b-trees. (Before we used numeric
constants).
- Removed code that assumed that b-trees has similar costs as binary
trees. Replaced with engine calls that returns the cost.
- Added Bitmap::find_first_bit()
- Added timings to join_cache for ANALYZE table (patch by Sergei Petrunia).
- Added records_init and records_after_filter to POSITION to remember
more of what best_access_patch() calculates.
- table_after_join_selectivity() changed to recalculate 'records_out'
based on the new fields from best_access_patch()
Bug fixes:
- Some queries did not update last_query_cost (was 0). Fixed by moving
setting thd->...last_query_cost in JOIN::optimize().
- Write '0' as number of rows for const tables with a matching row.
Some internals:
- Engine cost are stored in OPTIMIZER_COSTS structure. When a
handlerton is created, we also created a new cost variable for the
handlerton. We also create a new variable if the user changes a
optimizer cost for a not yet loaded handlerton either with command
line arguments or with SET
@@global.engine.optimizer_cost_variable=xx.
- There are 3 global OPTIMIZER_COSTS variables:
default_optimizer_costs The default costs + changes from the
command line without an engine specifier.
heap_optimizer_costs Heap table costs, used for temporary tables
tmp_table_optimizer_costs The cost for the default on disk internal
temporary table (MyISAM or Aria)
- The engine cost for a table is stored in table_share. To speed up
accesses the handler has a pointer to this. The cost is copied
to the table on first access. If one wants to change the cost one
must first update the global engine cost and then do a FLUSH TABLES.
This was done to be able to access the costs for an open table
without any locks.
- When a handlerton is created, the cost are updated the following way:
See sql/keycaches.cc for details:
- Use 'default_optimizer_costs' as a base
- Call hton->update_optimizer_costs() to override with the engines
default costs.
- Override the costs that the user has specified for the engine.
- One handler open, copy the engine cost from handlerton to TABLE_SHARE.
- Call handler::update_optimizer_costs() to allow the engine to update
cost for this particular table.
- There are two costs stored in THD. These are copied to the handler
when the table is used in a query:
- optimizer_where_cost
- optimizer_scan_setup_cost
- Simply code in best_access_path() by storing all cost result in a
structure. (Idea/Suggestion by Igor)
Final added to:
- All reasonable classes inhereted from Field
- All classes inhereted from Protocol
- Almost all Handler classes
- Some important Item classes
The stripped size of mariadbd is just 4K smaller, but several object files
showed notable improvements in common execution paths.
- Checked field.o and item_sum.o
Other things:
- Added 'override' to a few class functions touched by this patch.
- Removed 'virtual' from a new class functions that had/got 'override'
- Changed Protocol_discard to inherit from Protocol instad of Protocol_text
Rowid Filter check is just like Index Condition Pushdown check: before
we check the filter, we must check if we have walked out of the range
we are scanning. (If we did, we should return, and not continue the scan).
Consequences of this:
- Rowid filtering doesn't work for keys that have partially-covered
blob columns (just like Index Condition Pushdown)
- The rowid filter function has three return values: CHECK_POS (passed)
CHECK_NEG (filtered out), CHECK_OUT_OF_RANGE.
All of the above is implemented in this patch
Prototype change:
- virtual ha_rows records_in_range(uint inx, key_range *min_key,
- key_range *max_key)
+ virtual ha_rows records_in_range(uint inx, const key_range *min_key,
+ const key_range *max_key,
+ page_range *res)
The handler can ignore the page_range parameter. In the case the handler
updates the parameter, the optimizer can deduce the following:
- If previous range's last key is on the same block as next range's first
key
- If the current key range is in one block
- We can also assume that the first and last block read are cached!
This can be used for a better calculation of IO seeks when we
estimate the cost of a range index scan.
The parameter is fully implemented for MyISAM, Aria and InnoDB.
A separate patch will update handler::multi_range_read_info_const() to
take the benefits of this change and also remove the double
records_in_range() calls that are not anymore needed.
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
make live checksum to be returned in handler::info(),
and slow table-scan checksum to be calculated in handler::checksum().
part of
MDEV-16249 CHECKSUM TABLE for a spider table is not parallel and saves all data in memory in the spider head by default
This patch contains a full implementation of the optimization
that allows to use in-memory rowid / primary filters built for range
conditions over indexes. In many cases usage of such filters reduce
the number of disk seeks spent for fetching table rows.
In this implementation the choice of what possible filter to be applied
(if any) is made purely on cost-based considerations.
This implementation re-achitectured the partial implementation of
the feature pushed by Galina Shalygina in the commit
8d5a11122c.
Besides this patch contains a better implementation of the generic
handler function handler::multi_range_read_info_const() that
takes into account gaps between ranges when calculating the cost of
range index scans. It also contains some corrections of the
implementation of the handler function records_in_range() for MyISAM.
This patch supports the feature for InnoDB and MyISAM.
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
This was done to make it clear that a update_row() should not change the
row.
This was not done for handler::write_row() as this function still needs
to update auto_increment values in the row. This should at some point
be moved to handler::ha_write_row() after which write_row can also have
const arguments.
* don't issue an error for ER_KEY_BASED_ON_GENERATED_VIRTUAL_COLUMN
* support keyread on vcols
* callback into the server to compute vcol values from mi_check/mi_repair
* DMLs just work. Automatically.
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
- index_merge/intersection is unable to work on GIS indexes, because:
1. index scans have no Rowid-Ordered-Retrieval property
2. When one does an index-only read over a GIS index, they do not
get the index tuple, because index only contains bounding box of the geometry.
This is why key_copy() call crashed.
This patch fixes#1, which makes the problem go away. Theoretically, it would
be nice to check #2, too, but SE API semantics is not sufficiently precise to do it.
Fixed failing tests in sys_vars as we have now stricter checking of setting of variables.
mysql-test/suite/sys_vars/r/innodb_adaptive_flushing_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_adaptive_hash_index_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_large_prefix_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_random_read_ahead_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_stats_on_metadata_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_strict_mode_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_support_xa_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_table_locks_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_master_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_slave_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_flushing_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_hash_index_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_large_prefix_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_random_read_ahead_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_stats_on_metadata_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_strict_mode_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_support_xa_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_table_locks_basic.test:
One can now only assign 0 or 1 to boolean variables
mysys/my_getsystime.c:
Merge + fixed bug that __NR_clock_gettime didn't work in 5.5
The issue was that check/optimize/anaylze did not zerofill the table before they started to work on it.
Added one more element to not often used function handler::auto_repair() to allow handler to decide when to auto repair.
mysql-test/suite/maria/r/maria-autozerofill.result:
Test case for lp:944422
mysql-test/suite/maria/t/maria-autozerofill.test:
Test case for lp:944422
sql/ha_partition.cc:
Added argument to auto_repair()
sql/ha_partition.h:
Added argument to auto_repair()
sql/handler.h:
Added argument to auto_repair()
sql/table.cc:
Let auto_repair() decide which errors to trigger auto-repair
storage/archive/ha_archive.h:
Added argument to auto_repair()
storage/csv/ha_tina.h:
Added argument to auto_repair()
storage/maria/ha_maria.cc:
Give better error & warning messages for auto-repaired tables.
storage/maria/ha_maria.h:
Added argument to auto_repair()
Always auto-repair in case of moved table.
storage/maria/ma_open.c:
Remove special handling of HA_ERR_OLD_FILE (this is now handled in auto_repair())
storage/myisam/ha_myisam.h:
Added argument to auto_repair()
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
ON 64 BIT MACHINES
PROBLEM: When sorting index during repair of
myisam tables, due to improper casting
of buffer size variables value of myisam_
sort_buffer_size is not set greater than
4GB.
SOLUTION: Proper casting of buffer size variable.
myisam_buffer_size changed to unsigned
long long to handle size > 4GB on
linux as well as windows.
