The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
1. use Regexp_processor_pcre::set_recursion_limit() to set the
recursion limit depending on the current available stack size
2. make pcre stack frame to be estimated no less than 500 bytes.
sometimes pcre estimates it too low, even though the manual
says 500+16 bytes (it was estimated only 188 for me, actual
frame size was 512).
3. do it for embedded too
Disable memory leak check in debug server, if rocksdb is loaded.
There is some subtle bug somewhere in 3rd party code we cannot
do much about.
The bug is manifested as follows
Rocksdb does not shutdown worker threads, when plugin is shut down. Thus
OS does not unload the library since there are some active threads using
this library's code. Thus global destructors in the library do not run,
and there is still some memory allocated when server exits.
The workaround disables server's memory leak check, if rocksdb engine was
loaded.
and
MDEV-13011 Server crashes in THD::handle_condition or Assertion `! is_set() || m_can_overwrite_status' fails upon attempt to connect with max_session_mem_used = 8192
errors when a connection is killed in the
* TABLE_SHARE::init_from_sql_statement_string()
* THD::init()
also, safety-wise, don't check max_mem_used on free() and when some error
was already issued.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
post-review fixes:
* move all ssl implementation related ifdefs/defines to one file
(ssl_compat.h)
* work around OpenSSL-1.1 desire to malloc every EVP context by
run-time checking that context allocated on the stack is big enough
(openssl.c)
* use newer version of the AWS SDK for OpenSSL 1.1
* use get_dh2048() function as generated by openssl 1.1
(viosslfactories.c)
Initial support
tested against OpenSSL 1.0.1, 1.0.2, 1.1.0, Yassl and LibreSSL
not working on Windows with native SChannel support, due to wrong cipher
mapping: Latter one requires push of CONC-241 fixes.
Please note that OpenSSL 0.9.8 and OpenSSL 1.1.0 will not work: Even if
the build succeeds, test cases will fail with various errors, especially
when using different tls libraries or versions for client and server.
Our RPL_VERSION_HACK prefix caused MySQL clients to always report 5.5
major and minor versions, even if a specific fake version is passed via
my.cnf or command line parameters. When a specific version is requested,
don't employ the RPL_VERSION_HACK prefix within the server handshake
packet.
Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
- Backup will load encryption plugins outside of mysqld. Thus, do not
force loading MyISAM plugin in plugin_load.
- init_signals() will be used in backup, make it global, not static.
because mysql->net.thd was reset to NULL in mysql_real_connect()
and thd_increment_bytes_received() didn't do anything.
Fix:
* set mysql->net.thd to current_thd instread.
* remove the test for non-null THD from a very often used
function thd_increment_bytes_received().
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
Applied lost in a merge revision 7f38a07:
MDEV-10043 - main.events_restart fails sporadically in buildbot (crashes upon
shutdown)
There was race condition between shutdown thread and event worker threads.
Shutdown thread waits for thread_count to become 0 in close_connections(). It
may happen so that event worker thread was started but didn't increment
thread_count by this time. In this case shutdown thread may miss wait for this
working thread and continue deinitialization. Worker thread in turn may continue
execution and crash on deinitialized data.
Fixed by incrementing thread_count before thread is actually created like it is
done for connection threads.
Also let event scheduler not to inc/dec running threads counter for symmetry
with other "service" threads.
Protection added to reopen_file() and new_file_impl().
Without this we could get an assert in fn_format() as name == 0,
because the file was closed and name reset, atthe same time
new_file_impl() was called.
The reason for this is that stop slave takes LOCK_active_mi over the
whole operation while some slave operations will also need LOCK_active_mi
which causes deadlocks.
Fixed by introducing object counting for Master_info and not taking
LOCK_active_mi over stop slave or even stop_all_slaves()
Another benefit of this approach is that it allows:
- Multiple threads can run SHOW SLAVE STATUS at the same time
- START/STOP/RESET/SLAVE STATUS on a slave will not block other slaves
- Simpler interface for handling get_master_info()
- Added some missing unlock of 'log_lock' in error condtions
- Moved rpl_parallel_inactivate_pool(&global_rpl_thread_pool) to end
of stop_slave() to not have to use LOCK_active_mi inside
terminate_slave_threads()
- Changed argument for remove_master_info() to Master_info, as we always
have this available
- Fixed core dump when doing FLUSH TABLES WITH READ LOCK and parallel
replication. Problem was that waiting for pause_for_ftwrl was not done
when deleting rpt->current_owner after a force_abort.
options --log-slow-admin-statements, --log-queries-not-using-indexes and --log-slow-slave-statements have no effect if --log_slow_queries is not set
1. s/--log_slow_queries/--log-slow-queries/
2. disable log-slow-admin-statement/etc in mytr when doing mysqld --help
==== Description ====
Flashback can rollback the instances/databases/tables to an old snapshot.
It's implement on Server-Level by full image format binary logs (--binlog-row-image=FULL), so it supports all engines.
Currently, it’s a feature inside mysqlbinlog tool (with --flashback arguments).
Because the flashback binlog events will store in the memory, you should check if there is enough memory in your machine.
==== New Arguments to mysqlbinlog ====
--flashback (-B)
It will let mysqlbinlog to work on FLASHBACK mode.
==== New Arguments to mysqld ====
--flashback
Setup the server to use flashback. This enables binary log in row mode
and will enable extra logging for DDL's needed by flashback feature
==== Example ====
I have a table "t" in database "test", we can compare the output with "--flashback" and without.
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" > /tmp/1.sql
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" -B > /tmp/2.sql
Then, importing the output flashback file (/tmp/2.log), it can flashback your database/table to the special time (--start-datetime).
And if you know the exact postion, "--start-postion" is also works, mysqlbinlog will output the flashback logs that can flashback to "--start-postion" position.
==== Implement ====
1. As we know, if binlog_format is ROW (binlog-row-image=FULL in 10.1 and later), all columns value are store in the row event, so we can get the data before mis-operation.
2. Just do following things:
2.1 Change Event Type, INSERT->DELETE, DELETE->INSERT.
For example:
INSERT INTO t VALUES (...) ---> DELETE FROM t WHERE ...
DELETE FROM t ... ---> INSERT INTO t VALUES (...)
2.2 For Update_Event, swapping the SET part and WHERE part.
For example:
UPDATE t SET cols1 = vals1 WHERE cols2 = vals2
--->
UPDATE t SET cols2 = vals2 WHERE cols1 = vals1
2.3 For Multi-Rows Event, reverse the rows sequence, from the last row to the first row.
For example:
DELETE FROM t WHERE id=1; DELETE FROM t WHERE id=2; ...; DELETE FROM t WHERE id=n;
--->
DELETE FROM t WHERE id=n; ...; DELETE FROM t WHERE id=2; DELETE FROM t WHERE id=1;
2.4 Output those events from the last one to the first one which mis-operation happened.
For example:
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
* Remove duplicate lines from tests
* Use thd instead of current_thd
* Remove extra wsrep_binlog_format_names
* Correctly merge union patch from 5.5 wrt duplicate rows.
* Correctly merge SELinux changes into 10.1
