with temporary tables
There were two problems the test case from this bug was
triggering:
1. JOIN::rollup_init() was supposed to wrap all constant Items
into another object for queries with the WITH ROLLUP modifier
to ensure they are never considered as constants and therefore
are written into temporary tables if the optimizer chooses to
employ them for DISTINCT/GROUP BY handling.
However, JOIN::rollup_init() was called before
make_join_statistics(), so Items corresponding to fields in
const tables could not be handled as intended, which was
causing all kinds of problems later in the query execution. In
particular, create_tmp_table() assumed all constant items
except "hidden" ones to be removed earlier by remove_const()
which led to improperly initialized Field objects for the
temporary table being created. This is what was causing crashes
and valgrind errors in storage engines.
2. Even when the above problem had been fixed, the query from
the test case produced incorrect results due to some
DISTINCT/GROUP BY optimizations being performed by the
optimizer that are inapplicable in the WITH ROLLUP case.
Fixed by disabling inapplicable DISTINCT/GROUP BY optimizations
when the WITH ROLLUP modifier is present, and splitting the
const-wrapping part of JOIN::rollup_init() into a separate
method which is now invoked after make_join_statistics() when
the const tables are already known.
mysql-test/r/olap.result:
Added a test case for bug #48131.
mysql-test/t/olap.test:
Added a test case for bug #48131.
sql/sql_select.cc:
1. Disabled inapplicable DISTINCT/GROUP BY optimizations when
the WITH ROLLUP modifier is present.
2. Split the const-wrapping part of JOIN::rollup_init() into a
separate method.
sql/sql_select.h:
Added rollup_process_const_fields() declaration.
subquery returning multiple rows
Error handling was missing when handling subqueires in WHERE
and when assigning a SELECT result to a @variable.
This caused crash(es).
Fixed by adding error handling code to both the WHERE
condition evaluation and to assignment to an @variable.
having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
If an outer query is broken, a subquery might not even get set up.
EXPLAIN EXTENDED did not expect this and merrily tried to de-ref all
of the half-setup info.
We now catch this case and print as much as we have, as it doesn't cost us
anything (doesn't make regular execution slower).
mysql-test/r/explain.result:
Show that EXPLAIN EXTENDED with subquery and illegal out query doesn't crash.
Show also that SHOW WARNINGS will render an additional Note in the hope of
being, well, helpful.
mysql-test/t/explain.test:
If we have only half a query for EXPLAIN EXTENDED to print (i.e.,
incomplete subquery info as outer query is illegal), we should
provide the user with as much info as we easily can if they ask
for it. What we should not do is crash when they come asking for
help, that violates etiquette in some countries.
sql/item_subselect.cc:
If the sub-query's actually set up, print it. Otherwise, elide.
Queries with nested outer joins may lead to crashes or
bad results because an internal data structure is not handled
correctly.
The optimizer uses bitmaps of nested JOINs to determine
if certain table can be placed at a certain place in the
JOIN order.
It does maintain a bitmap describing in which JOINs
last placed table is nested.
When it puts a table it makes sure the bit of every JOIN that
contains the table in question is set (because JOINs can be nested).
It does that by recursively setting the bit for the next enclosing
JOIN when this is the first table in the JOIN and recursively
resetting the bit if it's the last table in the JOIN.
When it removes a table from the join order it should do the
opposite : recursively unset the bit if it's the only remaining
table in this join and and recursively set the bit if it's removing
the last table of a JOIN.
There was an error in how the bits was set for the upper levels :
when removing a table it was setting the bit for all the enclosing
nested JOINs even if there were more tables left in the current JOIN
(which practically means that the upper nested JOINs were not affected).
Fixed by stopping the recursion at the relevant level.
mysql-test/r/join.result:
Bug #42116: test case
mysql-test/t/join.test:
Bug #42116: test case
sql/sql_select.cc:
Bug #41116: don't go up and set the bits if more tables in
at the current JOIN level
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection. Restarting master server can bring two problems as following:
1. The time out error is encountered sporadically. The slave I/O thread tries
to reconnect master ten times, which is set in my.cnf. So in the test
framework sporadically the slave I/O thread really stoped when it can't
reconnect to master in the ten times successfully before the master starts,
then the time out error will be encountered while waiting for the slave to
start.
2. These warnings and errors are produced in server log file when
the slave I/O thread tries to get the values of the UNIX_TIMESTAMP,
SERVER_ID from master under the transient network disconnection.
To fix problem 1, increase the master retry count to sixty times,
so that the slave I/O thread has enough time to reconnect master
successfully.
To fix problem 2, suppress these warnings and errors by mtr suppression,
because they are expected.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock-slave.opt:
Added the *.opt file for increasing master retry count to
sixty times.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added mtr suppression for suppressing warnings and errors
in server log file.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
Bug#46539 Various crashes on INSERT IGNORE SELECT + SELECT FOR UPDATE.
If a transaction was rolled back inside InnoDB due to a deadlock
or lock wait timeout, and the statement had IGNORE clause,
the server could crash at the end of the statement or on shutdown.
This was caused by the error handling infrastructure's attempt to
ignore a non-ignorable error.
When a transaction rollback request is raised, switch off
current_select->no_error flag, so that the following error
won't be ignored.
Instead, we could add !thd->is_fatal_sub_stmt_error to
my_message_sql(), but since in write_record() we switch
off no_error, the same approach is used in
thd_mark_transaction_to_rollback().
@todo: call thd_mark_transaction_to_rollback() from
handler::print_error(), then we can easily make sure
that the error reported by print_error is not ignored.
mysql-test/r/innodb_lock_wait_timeout_1.result:
Update results (Bug#46539).
mysql-test/t/innodb_lock_wait_timeout_1.test:
Add a test case for Bug#46539
sql/sql_class.cc:
When a transaction rollback request is raised, switch of
current_select->no_error flag, so that the following error
won't be ignored.
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
BUG#47073 - valgrind errs, corruption,failed repair of partition,
low myisam_sort_buffer_size
Fixed race conditions discovered with the provided test case and
stabilized test case.
include/myisam.h:
Serialize submission of messages from multi-threaded REPAIR.
mysql-test/r/myisam.result:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
mysql-test/t/myisam.test:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
storage/myisam/ha_myisam.cc:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/mi_check.c:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/sort.c:
Only master thread is allowed to detach write cache from
the share.
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
mysql-test/include/have_case_insensitive_fs.inc:
test case
mysql-test/r/case_insensitive_fs.require:
test case
mysql-test/r/grant_lowercase_fs.result:
test result
mysql-test/r/lowercase_fs_off.result:
test result
mysql-test/r/ps_grant.result:
test result
mysql-test/r/system_mysql_db.result:
changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
test case
mysql-test/t/lowercase_fs_off.test:
test case
scripts/mysql_system_tables.sql:
changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
This assertion would occur if UPDATE was used to update multiple
tables containing an AUTO_INCREMENT column and if the inserted
row had a user-supplied value for that column. The assertion
could then be triggered by the next statement.
The problem was only noticeable on debug builds of the server.
The cause of the problem was that the code for multi update did
not properly reset the TABLE->auto_increment_if_null flag after update.
The flag is used to indicate that a non-null value of an auto_increment field
has been provided by the user or retrieved from a current record.
Open_tables() contains an assertion that tests this flag, and this
was triggered in this case by ALTER TABLE.
This patch fixes the problem by resetting the auto_increment_if_null
field to FALSE once a row has been updated.
This bug is similar to Bug#47274, but for multi update rather
than INSERT DELAYED.
Test case added to update.test.
Problem: involving a spatial index for "non-spatial" queries
(that don't containt MBRXXX() functions) may lead to failed assert.
Fix: don't use spatial indexes in such cases.
mysql-test/r/gis-rtree.result:
Fix for bug#48258: Assertion failed when using a spatial index
- test result.
mysql-test/t/gis-rtree.test:
Fix for bug#48258: Assertion failed when using a spatial index
- test case.
sql/opt_range.cc:
Fix for bug#48258: Assertion failed when using a spatial index
- allow only spatial functions (MBRXXX) for itMBR keyparts.
line 138 when forcing a spatial index
Problem: "Spatial indexes can be involved in the search
for queries that use a function such as MBRContains()
or MBRWithin() in the WHERE clause".
Using spatial indexes for JOINs with =, <=> etc.
predicates is incorrect.
Fix: disable spatial indexes for such queries.
mysql-test/r/select.result:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- test result.
mysql-test/t/select.test:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- test case.
sql/sql_select.cc:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- disable spatial indexes for queries which use
non-spatial conditions (e.g. NATURAL JOINs).
If the first argument to GeomFromWKB function is a geometry
field then the function just returns its value.
However in doing so it's not preserving first argument's
null_value flag and this causes unexpected null value to
be returned to the calling function.
Fixed by updating the null_value of the GeomFromWKB function
in such cases (and all other cases that return a NULL e.g.
because of not enough memory for the return buffer).
file
Issuing 'FLUSH LOGS' does not close and reopen indexfile.
Instead a SEEK_SET is performed.
This patch makes index file to be closed and reopened whenever a
rotation happens (FLUSH LOGS is issued or binary log exceeds
maximum configured size).
mysql-test/suite/binlog/r/binlog_delete_and_flush_index.result:
Result file.
mysql-test/suite/binlog/t/binlog_delete_and_flush_index.test:
Test case.
sql/log.cc:
Added LOG_CLOSE_INDEX flag when calling MYSQL_BIN_LOG::close
from within MYSQL_BIN_LOG::new_file_impl (which should just be
called whenever a rotation is to happen - FLUSH LOGS issued or
binlog size exceeds the maximum configured).
grants are reapplied.
After renaming a user and trying to re-apply grants results in additional
grants.
This is because we use username as part of the key for GRANT_TABLE structure.
When the user is renamed, we only change the username stored and the hash key
still contains the old user name and this results in the extra privileges
Fixed by rebuilding the hash key and updating the column_priv_hash structure
when the user is renamed
mysql-test/r/grant3.result:
Bug #41597 - After rename of user, there are additional grants when
grants are reapplied.
Testcase for BUG#41597
mysql-test/t/grant3.test:
Bug #41597 - After rename of user, there are additional grants when
grants are reapplied.
Testcase for BUG#41597
sql/sql_acl.cc:
Bug #41597 - After rename of user, there are additional grants when
grants are reapplied.
Fixed handle_grant_struct() to update the hash key when the user is renamed.
Added to set_user_details() method to GRANT_NAME class
If a thread is killed in the server, we throw "shutdown" only if one is actually in
progress; otherwise, we throw "query interrupted".
Control-C in the mysql command-line client is "incremental" now.
First Control-C sends KILL QUERY (when connected to 5.0+ server, otherwise, see next)
Next Control-C sends KILL CONNECTION
Next Control-C aborts client.
As the first two steps only pertain to an existing query,
Control-C will abort the client right away if no query is running.
client will give more detailed/consistent feedback on Control-C now.
client/mysql.cc:
Extends Control-C handling; enhances up feedback to user.
On 5.0+ servers, we try to be nice and send KILL QUERY first
if Control-C is pressed in the command-line client, but if
that doesn't work, we now give the user the opportunity to
send KILL CONNECTION with another Control-C (and to kill the
client with another Control-C if that somehow doesn't work
either).
mysql-test/t/flush_read_lock_kill.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/kill.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/rpl000001.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/rpl_error_ignored_table.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
sql/records.cc:
make error messages on KILL uniform for rr_*()
by folding that handling into rr_handle_error()
sql/sql_class.h:
Only throw "shutdown" when we have one flagged as being in progress;
otherwise, throw "query interrupted" as it's likely to be "KILL CONNECTION"
or related.
UPDATE + VIEW + SP + MERGE + ALTER
When cleaning up the stored procedure's internal
structures the flag to ignore the errors for
INSERT/UPDATE IGNORE was not cleaned up.
As a result error ignoring was on during name
resolution. And this is an abnormal situation : the
SELECT_LEX flag can be on only during query execution.
Fixed by correctly cleaning up the SELECT_LEX flag
when reusing the SELECT_LEX in a second execution.
