While reading a binary log that is being used by a master or was not properly
closed, most likely due to a crash, the following warning message is being
printed out: "Warning: this binlog was not closed properly. Most probably mysqld
crashed writing it.". This was scaring our users as the message was not taking
into account the possibility of the file is being just used by the master.
To avoid unnecessarily scaring our users, we replace the original message by the
following one: Warning: "this binlog is either is use or was not closed properly.".
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
BEGIN/COMMIT/ROLLBACK was subject to replication db rules, and
caused the boundary of a transaction not recognized correctly
when these queries were ignored by the rules.
Fixed the problem by skipping replication db rules for these
statements.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
"freeing items"
The calculation of the table map log event in the event constructor
was one byte shorter than what would be actually written. This would
lead to a mismatch between the number of bytes written and the event
end_log_pos, causing bad event alignment in the binlog (corrupted
binlog) or in the transaction cache while fixing positions
(MYSQL_BIN_LOG::write_cache). This could lead to impossible to read
binlog or even infinite loops in MYSQL_BIN_LOG::write_cache.
This patch addresses this issue by correcting the expected event
length in the Table_map_log_event constructor, when the field metadata
size exceeds 255.
In the output from mysqlbinlog, incident log events were
represented as just a comment. Since the incident log event
represents an incident that could cause the contents of the
database to change without being logged to the binary log,
it means that if the SQL is applied to a server, it could
potentially lead to that the databases are out of sync.
In order to handle that, this patch adds the statement "RELOAD
DATABASE" to the SQL output for the incident log event. This will
require a DBA to edit the file and handle the case as apropriate
before applying the output to a server.
165 changesets with 23 conflicts:
Text conflict in mysql-test/r/lock_multi.result
Text conflict in mysql-test/t/lock_multi.test
Text conflict in mysql-test/t/mysqldump.test
Text conflict in sql/item_strfunc.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/parse_file.cc
Text conflict in sql/slave.cc
Text conflict in sql/sp.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.cc
Text conflict in sql/sql_crypt.cc
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_view.cc
Text conflict in storage/innobase/handler/ha_innodb.cc
Text conflict in storage/myisam/mi_packrec.c
Text conflict in tests/mysql_client_test.c
Updates to Innobase, taken from main 5.1:
bzr: ERROR: Some change isn't sane:
File mysql-test/r/innodb-semi-consistent.result is owned by Innobase and should not be updated.
File mysql-test/t/innodb-semi-consistent.test is owned by Innobase and should not be updated.
File storage/innobase/handler/ha_innodb.cc is owned by Innobase and should not be updated.
File storage/innobase/ibuf/ibuf0ibuf.c is owned by Innobase and should not be updated.
File storage/innobase/include/row0mysql.h is owned by Innobase and should not be updated.
File storage/innobase/include/srv0srv.h is owned by Innobase and should not be updated.
File storage/innobase/include/trx0trx.h is owned by Innobase and should not be updated.
File storage/innobase/include/trx0trx.ic is owned by Innobase and should not be updated.
File storage/innobase/lock/lock0lock.c is owned by Innobase and should not be updated.
File storage/innobase/page/page0cur.c is owned by Innobase and should not be updated.
File storage/innobase/row/row0mysql.c is owned by Innobase and should not be updated.
File storage/innobase/row/row0sel.c is owned by Innobase and should not be updated.
File storage/innobase/srv/srv0srv.c is owned by Innobase and should not be updated.
File storage/innobase/trx/trx0trx.c is owned by Innobase and should not be updated.
(Set env var 'ALLOW_UPDATE_INNOBASE_OWNED' to override.)
The rpl_binlog_corruption test case was inject failures, specifically,
incidents with invalid numbers to see if the replication was failing
gracefully. However, this test was causing the following warning message
in Valgrind: "Conditional jump or move depends on uninitialised value(s)"
The patch fixes the problem by correctly initializing the m_inicident
number.
Binlog the CREATE EVENT unless the created event been successfully dropped
Modified Query_log_event constructor to make sure that error_code
is not set to ER_SERVER_SHUTDOWN or ER_QUERY_INTERRUPTED errors
when NOT_KILLED
RBR was not considering the option --slave-skip-errors.
To fix the problem, we are reporting the ignored ERROR(s) as warnings thus avoiding
stopping the SQL Thread. Besides, it fixes the output of "SHOW VARIABLES LIKE
'slave_skip_errors'" which was showing nothing when the value "all" was assigned
to --slave-skip-errors.
@sql/log_event.cc
skipped rbr errors when the option skip-slave-errors is set.
@sql/slave.cc
fixed the output of for SHOW VARIABLES LIKE 'slave_skip_errors'"
@test-cases
fixed the output of rpl.rpl_idempotency
updated the test case rpl_skip_error
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
Bug#319 if while a non-transactional slave is replicating a transaction possible problem
It is impossible to roll back a mixed engines transaction when one of the engine is
non-transaction. In replication that fact is crucial because the slave can not safely
re-apply a transction that was interrupted with STOP SLAVE.
Fixed with making STOP SLAVE not be effective immediately in the case the current
group of replication events has modified a non-transaction table. In order for slave to leave
either the group needs finishing or the user issues KILL QUERY|CONNECTION slave_thread_id.
The issue happened to be two-fold.
The table map event was recorded into binlog having
an incorrect size when number of columns exceeded 251.
The Row-based event had incorrect recording and restoring m_width member within
the same as above conditions.
Fixed with correcting m_data_size and m_width.
Compiling with debug and assigning an invalid directory to --slave-load-tmpdir
was crashing the slave due to the following assertion DBUG_ASSERT(! is_set() ||
can_overwrite_status). This assertion assumes that a thread can change its
state once (i.e. ok,error, etc) before aborting, cleaning/resuming or completing
its execution unless the overwrite flag (i.e. can_overwrite_status) is true.
The Append_block_log_event::do_apply_event which is responsible for creating
temporary file(s) was not cleaning the thread state. Thus a failure while
trying to create a file in an invalid temporary directory was causing the crash.
To fix the problem we check if the temporary directory is valid before starting
the SQL Thread and reset the thread state before creating a file in
Append_block_log_event::do_apply_event.
The problem is issued because we set wrong start position and stop position of query string into binlog.
That two values are stored as part of head info of query string.
When we parse binlog, we first get position values then get the query string according position values.
But seems that two values are not calculated correctly after the parse of Yacc.
We don't want to touch so much of yacc because it may influence other codes.
So just add one space after 'INTO' key word when parsing.
This can easily resolve the problem.
If secure-file-priv was set on slave, it became unable to execute
LOAD DATA INFILE statements sent from master using mixed or
statement-based replication.
This patch fixes the issue by ignoring this security restriction
and checking if the files are created and read by the slave in the
--slave-load-tmpdir while executing the SQL Thread.
Signed integer format specifier forced to print the binlog header with server_id
negative if the unsigned value sets the sign-bit ON.
Fixed with correcting the specifier to correspond to typeof(server_id) == ulong.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
The bug happened because filtering-out a STMT_END_F-flagged event so that
the transaction COMMIT finds traces of incomplete statement commit.
Such situation is only possible with ndb circular replication. The filtered-out
rows event is one that immediately preceeds the COMMIT query event.
Fixed with deploying an the rows-log-event statement commit at executing
of the transaction COMMIT event.
Resources that were allocated by other than STMT_END_F-flagged event of
the last statement are clean up prior execution of the commit logics.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
It's a regression issue.
The reason of the bug appeared to be an error introduced into 5.1 source code.
A piece of code in Create_file_log_event::do_apply_event() did not have test
coverage which made make test and pb unaware.
Fixed with inverting the old value of the return value from
Create_file_log_event::do_apply_event().
The rpl test suite is extended with `rpl_cross_version' the file to hold
regression cases similar to the current.
The next number (AUTO_INCREMENT) field of the table for write
rows events are not initialized, and cause some engines (innodb)
not correctly update the tables's auto_increment value.
This patch fixed this problem by honor next number fields if present.
Problem: when the server reads a log_event from file, it should read
the post-header lengths from the format_description_log_event. Some
event types which currently have post-header length 0 did not do this,
and instead had a hard-coded zero length for the post-header. That
means the current server version will not be able to read future
versions of these events.
Fix: make the reader functions read the post-header.
Problem: When an Incident_log_event contains a bad incident number on disk,
the server crashes with an assertion.
Fix: Don't validate input with assertions. Use errors.
In certain situations, a scan of the table will return the error
code HA_ERR_RECORD_DELETED, and this error code is not
correctly caught in the Rows_log_event::find_row() function, which
causes an error to be returned for this case.
This patch fixes the problem by adding code to either ignore the
record and continuing with the next one, the the event of a table
scan, or change the error code to HA_ERR_KEY_NOT_FOUND, in the event
that a key lookup is attempted.
ha_statistic_increment for rpl_temporary
Problem: in some cases master send a special event to reconnecting
slave to keep slave's temporary tables (see #17284) and they still
have references to the "old" SQL slave thread and use them to access
thread's data.
Fix: set temporary tables thread references to the actual SQL slave
thread in such cases.
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
Rotate event is automatically generated and written when rotating binary
log or relay log. Rotate events for relay logs are usually ignored by slave
SQL thread becuase they have the same server id as that of the slave.
However, if --replicate-same-server-id is enabled, rotate event
for relay log would be treated as if it's a rotate event from master, and
would be executed by slave to update the rli->group_master_log_name and
rli->group_master_log_pos to a wrong value and cause the MASTER_POS_WAIT
function to fail and return NULL.
This patch fixed this problem by setting a flag bit (LOG_EVENT_RELAY_LOG_F)
in the event to tell the SQL thread to ignore these Rotate events generated
for relay logs.
This patch also added another binlog event flag bit (LOG_EVENT_ARTIFICIAL_F)
to distinquish faked events, the method used before this was by checking if
log_pos was zero.
In order to improve the performance when replicating to partitioned
myisam tables with row-based format, the number of rows of current
rows log event is estimated and used to setup storage engine for bulk
inserts.
The replication filtering rules were inappropiately applied when
executing BINLOG pseudo-query. The rules are supposed to be active
only at times when the slave's sql thread executes an event.
Fixed with correcting a condition to call replication rules only if
the slave sql thread executes the event.
- Implementing --base64-format=decode-rows, to display
SQL-alike decoded row events without their BINLOG statements.
- Adding --base64-format=decode-rows into tests when
calling mysqlbinlog to avoid non-deterministic results
- Removing resetting of last_table_id in "RESET MASTER",
which appeared to be dangerous.
Implementing -v command line parameter to mysqlbinlog
to decode and print row events.
mysql-test/include/mysqlbinlog_row_engine.inc
mysql-test/r/mysqlbinlog_row.result
mysql-test/r/mysqlbinlog_row_big.result
mysql-test/r/mysqlbinlog_row_innodb.result
mysql-test/r/mysqlbinlog_row_myisam.result
mysql-test/r/mysqlbinlog_row_trans.result
mysql-test/t/mysqlbinlog_row.test
mysql-test/t/mysqlbinlog_row_big.test
mysql-test/t/mysqlbinlog_row_innodb.test
mysql-test/t/mysqlbinlog_row_myisam.test
mysql-test/t/mysqlbinlog_row_trans.test
Adding tests
client/Makefile.am
Adding new files to symlink
client/mysqlbinlog.cc
Adding -v option
sql/log_event.cc
Impelentations of the new methods
sql/log_event.h
Declaration of the new methods and member
sql/mysql_priv.h
Adding new function prototype
sql/rpl_tblmap.cc
Adding pre-processor conditions
sql/rpl_tblmap.h
Adding pre-processor conditions
sql/rpl_utility.h
Adding pre-processor conditions
sql/sql_base.cc
Adding reset_table_id_sequence() function.
sql/sql_repl.cc
Resetting table_id on "RESET MASTER"
.bzrignore
Ignoring new symlinked files
manually resolved conflicts:
Text conflict in client/mysqltest.c
Contents conflict in mysql-test/include/have_bug25714.inc
Text conflict in mysql-test/include/have_ndbapi_examples.inc
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/suite/parts/inc/partition_check_drop.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check1.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check2.inc
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_basic_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_symlink_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_engine_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_syntax_myisam.result
Text conflict in mysql-test/suite/rpl_ndb/t/disabled.def
Text conflict in mysql-test/t/disabled.def
The problem of this bug is that we need to get the list of tables
to be updated for a multi-table update statement, which requires to
open all the tables referenced by the statement and resolve all
the fields involved in update in order to figure out the list of
tables for update. However if there are replicate filter rules,
some tables might not exist on slave and result in a failure
before we could examine the filter rules.
I think the whole problem can not be solved on slave alone,
the master must record and send the information of tables
involved for update to slave, so that the slave do not need to
open all the tables referenced by the multi-table update statement to
figure out which tables are involved for update.
So a status variable is added to Query_log event to store the
value of table map for update on master. And on slave, it will
try to get the value of this variable and use it to examine
filter rules without opening any tables on slave, if this values
is not available, the old approach is used and thus the bug will
still occur for when replicating from old masters.
On certain kinds of errors (e.g., out of stack), a call to Item_func_
set_user_var::fix_fields() might fail. Since the return value of this
call was not checked inside User_var_log_event::exec_event(), continuing
execution after this will cause a crash inside Item_func_set_user_var::
update_hash().
The bug is fixed by aborting execution of the event with an error if
fix_fields() fails, since it is not possible to continue execution anyway.
When flushing tables, there were a slight chance that the flush was occuring
between processing of two table map events. Since the tables are opened
one by one, it might result in that the tables were not valid and that sub-
sequent locking of tables would cause the slave to crash.
The problem is solved by opening and locking all tables at once using
simple_open_n_lock_tables(). Also, the patch contain a change to open_tables()
so that pre-locking only takes place when the trg_event_map is not zero, which
was not the case before (this caused the lock to be placed in thd->locked_tables
instead of thd->lock since the assumption was that triggers would be called
later and therefore the tables should be pre-locked).
Problem: a typo in the code. When autocommit, foreign_key_checks,
sql_auto_is_null, or unique_checks changes, it prints "SET", and then a
comma-separated list of assignments. However, it does not print the
assignment to the @@autocommit variable.
Fix: print the @@autocommit variable.
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
Problem: in mixed and statement mode, a query that refers to a
system variable will use the slave's value when replayed on
slave. So if the value of a system variable is inserted into a
table, the slave will differ from the master.
Fix: mark statements that refer to a system variable as "unsafe",
meaning they will be replicated by row in mixed mode and produce a warning
in statement mode. There are some exceptions: some variables are actually
replicated. Those should *not* be marked as unsafe.
BUG#34732: mysqlbinlog does not print default values for auto_increment variables
Problem: mysqlbinlog does not print default values for some variables,
including auto_increment_increment and others. So if a client executing
the output of mysqlbinlog has different default values, replication will
be wrong.
Fix: Always print default values for all variables that are replicated.
I need to fix the two bugs at the same time, because the test cases would
fail if I only fixed one of them.
There was a failure in that show slave status displayed a wrong message
when slave stopped at processing a row event inserting to a default-less
column.
The problem seem to have ceased after recent fixes in rbr code.
However, the test was not updated to carry testing of the case commented-out.
Uncommenting and editing the test.
Notice, Bug#23907 is most probably a duplicate of this one.
Rename client_last_error to last_error and client_last_errno to last_errno
to not break connectors which use the internal net structure for error handling.
log-slave-updates and circul repl
Slave SQL thread may execute one extra event when there are events
skipped by slave I/O thread (e.g. originated by the same server).
Whereas it was requested not to do so by the UNTIL condition.
This happens because we compare with the end position of previously
executed event. This is fine when there are no skipped by slave I/O
thread events, as end position of previous event equals to start
position of to be executed event. Otherwise this position equals to
start position of skipped event.
This is fixed by:
- reading the event to be executed before checking if the until condition
is satisfied.
- comparing the start position of the event to be executed. Since we do
not have the start position available, we compute it by subtracting
event length from end position (which is available).
- if there are no events on the event queue at the slave sql starting
time, that meet until condition, we stop immediately, as in this
case we do not want to wait for next event.
a SELECT doesn't cause ROLLBACK of statem".
The idea of the fix is to ensure that we always commit the current
statement at the end of dispatch_command(). In order to not issue
redundant disc syncs, an optimization of the two-phase commit
protocol is implemented to bypass the two phase commit if
the transaction is read-only.
The error message due to lack of the default value for an extra field
was not as informative as it should be.
Fixed with improving the scheme of gathering, propagating and reporting
errors in applying rows events.
The scheme is in the following.
Any kind of error of processing of a row event incidents are to be
registered with my_error().
In the end Rows_log_event::do_apply_event() invokes rli->report() with the
message to display consisting of all the errors.
This mimics `show warnings' displaying.
A simple test checks three errors in processing an event.
Two hunks - a user level error and pushing it into the list -
have been devoted to already fixed Bug@31702.
Some open issues relating to this artifact listed on BUG@21842 page and
on WL@3679.
Todo: to synchronize the statement in the tests comments on Update and Delete
events may not stop when an extra field does not have a default with wl@3228 spec.
Main problem: mysql 5.1 cannot read binlogs from 4.1.
Subproblem 1: There is a mistake in sql_ex_info::init. The read_str()
function updates its first argument to point to the next character to
read. However, it is applied only to a copy of the buffer pointer, so the
real buffer pointer is not updated.
Fix 1: do not take a copy of the buffer pointer. The copy was needed
because sql_ex_info::init does not use the const attribute on some of its
arguments. So we add the const attribute, too.
Subproblem 2: The first BINLOG statement is asserted to be a
FORMAT_DESCRIPTION_LOG_EVENT, but 4.1 binlogs begin with START_EVENT_V3.
Fix 2: allow START_EVENT_V3 too.
Problem: When slave reads format_description_log_event, it checks if the
master is a version that uses an old binlog format. See also BUG#27779.
Not all possible server_versions were listed.
Fix: Check for all server_versions which use the old binlog_format.
Problem: Replication fails when master is mysql-5.1-wl2325-5.0-drop6 and
slave is mysql-5.1-new-rpl. The reason is that, in
mysql-5.1-wl2325-5.0-drop6, the event type id's were different than in
mysql-5.1-new-rpl.
Fix (in mysql-5.1-new-rpl):
(1) detect that the server that generated the events uses the old
format, by checking the server version of the format_description_log_event
This patch recognizes mysql-5.1-wl2325-5.0-drop6p13-alpha,
mysql-5.1-wl2325-5.0-drop6, mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
(2) if the generating server is old, map old event types to new event
types using a permutation array.
I've also added a test case which reads binlogs for four different
versions.
Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
fine
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
Now, every transaction (including autocommit transactions) starts with
a BEGIN and ends with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
cause ROLLBACK of statement", part 1. Review fixes.
Do not send OK/EOF packets to the client until we reached the end of
the current statement.
This is a consolidation, to keep the functionality that is shared by all
SQL statements in one place in the server.
Currently this functionality includes:
- close_thread_tables()
- log_slow_statement().
After this patch and the subsequent patch for Bug#12713, it shall also include:
- ha_autocommit_or_rollback()
- net_end_statement()
- query_cache_end_of_result().
In future it may also include:
- mysql_reset_thd_for_next_command().
without PK
Bug#31609 Not all RBR slave errors reported as errors
bug#32468 delete rows event on a table with foreign key constraint fails
The first two bugs comprise idempotency issues.
First, there was no error code reported under conditions of the bug
description although the slave sql thread halted.
Second, executions were different with and without presence of prim key in
the table.
Third, there was no way to instruct the slave whether to ignore an error
and skip to the following event or to halt.
Fourth, there are handler errors which might happen due to idempotent
applying of binlog but those were not listed among the "idempotent" error
list.
All the named issues are addressed.
Wrt to the 3rd, there is the new global system variable, changeble at run
time, which controls the slave sql thread behaviour.
The new variable allows further extensions to mimic the sql_mode
session/global variable.
To address the 4th, the new bug#32468 had to be fixed as it was staying
in the way.
In the patch for BUG#21842, the code for handling old rows events were
refactored. There were a bug in the refactored code (possibly introduced
after the patch for BUG#21842) that caused caused the refactored old events
to read a columns bitmap after image even though there is no such bitmap
for old events. As a result, the reading got out of sync, and started reading
invalid data.
This patch removes all trace of the after image column bitmap from the refactored
old events and removes functions that are no longer needed because they are empty.
Problem: some pieces of code relied on the default character
set settings, which didn't work in case of default character set
ucs2.
Fix: Specifying character set explicitly, not to depend on
the default settings.
The client program 'mysqlbinlog' crashed when trying to print a User_var_log_event holding
a floating-point value since the format specifier for my_b_printf() does not support
floating-point format specifiers.
This patch prints the floating-point number to an internal buffer, and then writes
that buffer to the output instead.
