The problem from a user's perspective: user creates table A, and then tries
to CREATE TABLE a SELECT from A - and this causes a deadlock error, a hang,
or fails with a debug assert, but only if the storage engine is InnoDB.
The origin of the problem: InnoDB uses case-insensitive collation
(system_charset_info) when looking up the internal table share, thus returning
the same share for 'a' and 'A'.
Cause of the user-visible behavior: since the same share is returned to SQL
locking subsystem, it assumes that the same table is first locked (within the
same session) for WRITE, and then for READ, and returns a deadlock error.
However, the code is wrong in not properly cleaning up upon an error, leaving
external locks in place, which leads to assertion failures and hangs.
Fix that has been implemented: the SQL layer should properly propagate the
deadlock error, cleaning up and freeing all resources.
Further work towards a more complete solution: InnoDB should not use case
insensitive collation for table share hash if table names on disk honor the case.
mysql-test/r/innodb-deadlock.result:
Bug#25164 test case result
mysql-test/t/innodb-deadlock.test:
Bug#25164 test case. The CREATE TABLE may fail depending on the character set
of the system and filesystem, but it should never hang.
sql/lock.cc:
Unlock the storage engine "external" table level locks, if the MySQL thr_lock
locking subsystem detects a deadlock error.
- Move increment of "i" to "increment section" of for loop
- Protect against writing after end of "buff"(backport from 5.1)
sql/sql_show.cc:
- Move the increment of i to "increment" section of for loop. Since "i"
was initially 0 the for loop exited immediately
- Add protection for writing after end of "buff"
This is a performance bug, related to the parsing or 'OR' and 'AND' boolean
expressions.
Let N be the number of expressions involved in a OR (respectively AND).
When N=1
For example, "select 1" involve only 1 term: there is no OR operator.
In 4.0 and 4.1, parsing expressions not involving OR had no overhead.
In 5.0, parsing adds some overhead, with Select->expr_list.
With this patch, the overhead introduced in 5.0 has been removed,
so that performances for N=1 should be identical to the 4.0 performances,
which are optimal (there is no code executed at all)
The overhead in 5.0 was in fact affecting significantly some operations.
For example, loading 1 Million rows into a table with INSERTs,
for a table that has 100 columns, leads to parsing 100 Millions of
expressions, which means that the overhead related to Select->expr_list
is executed 100 Million times ...
Considering that N=1 is by far the most probable expression,
this case should be optimal.
When N=2
For example, "select a OR b" involves 2 terms in the OR operator.
In 4.0 and 4.1, parsing expressions involving 2 terms created 1 Item_cond_or
node, which is the expected result.
In 5.0, parsing these expression also produced 1 node, but with some extra
overhead related to Select->expr_list : creating 1 list in Select->expr_list
and another in Item_cond::list is inefficient.
With this patch, the overhead introduced in 5.0 has been removed
so that performances for N=2 should be identical to the 4.0 performances.
Note that the memory allocation uses the new (thd->mem_root) syntax
directly.
The cost of "is_cond_or" is estimated to be neglectable: the real problem
of the performance degradation comes from unneeded memory allocations.
When N>=3
For example, "select a OR b OR c ...", which involves 3 or more terms.
In 4.0 and 4.1, the parser had no significant cost overhead, but produced
an Item tree which is difficult to evaluate / optimize during runtime.
In 5.0, the parser produces a better Item tree, using the Item_cond
constructor that accepts a list of children directly, but at an extra cost
related to Select->expr_list.
With this patch, the code is implemented to take the best of the two
implementations:
- there is no overhead with Select->expr_list
- the Item tree generated is optimized and flattened.
This is achieved by adding children nodes into the Item tree directly,
with Item_cond::add(), which avoids the need for temporary lists and memory
allocation
Note that this patch also provide an extra optimization, that the previous
code in 5.0 did not provide: expressions are flattened in the Item tree,
based on what the expression already parsed is, and not based on the order
in which rules are reduced.
For example : "(a OR b) OR c", "a OR (b OR c)" would both be represented
with 2 Item_cond_or nodes before this patch, and with 1 node only with this
patch. The logic used is based on the mathematical properties of the OR
operator (it's associative), and produces a simpler tree.
sql/item_cmpfunc.h:
Improved performances for parsing boolean expressions
sql/sql_yacc.yy:
Improved performances for parsing boolean expressions
mysql-test/r/parser_precedence.result:
Added test cases to cover boolean operator precedence
mysql-test/t/parser_precedence.test:
Added test cases to cover boolean operator precedence
Killing a SELECT query with KILL QUERY or KILL CONNECTION
causes a server crash if the query cache is enabled.
Normal evaluation of a query may be interrupted by the
KILL QUERY/CONNECTION statement, in this case the mysql_execute_command
function returns TRUE, and the thd->killed flag has true value.
In this case the result of the query may
be cached incompletely (omitting call to query_cache_insert inside
the net_real_write function), and next call to query_cache_end_of_result
may lead to server crash.
Thus, the query_cache_end_of_result function has been modified to abort
query cache in the case of killed thread.
sql/sql_cache.cc:
Fixed bug #30201.
The query_cache_end_of_result function has been modified to abort query
cache in the case of query execution failure. Also this function has been
modified to remove incomplete query block.
into adventure.(none):/home/thek/Development/cpp/mysql-5.0-runtime
mysql-test/r/query_cache.result:
Auto merged
mysql-test/t/query_cache.test:
Auto merged
Although the query cache doesn't support retrieval of statements containing
column level access control, it was still possible to cache such statements
thus wasting memory.
This patch extends the access control check on the target tables to avoid
caching a statement with column level restrictions.
Views are excepted and can be cached but only retrieved by super user account.
mysql-test/t/query_cache_with_views.test:
Rename: mysql-test/t/view_query_cache.test -> mysql-test/t/query_cache_with_views.test
mysql-test/r/query_cache_with_views.result:
Rename: mysql-test/r/view_query_cache.result -> mysql-test/r/query_cache_with_views.result
mysql-test/r/query_cache.result:
Modified test case to allow caching of views
mysql-test/t/query_cache.test:
Modified test case to allow caching of views
sql/sql_cache.cc:
Allow caching of views
The server created temporary tables for filesort in the working directory
instead of the specified tmpdir directory.
sql/item.cc:
Fixed bug #30287.
The Item_field::set_field method has been modified to reset the any_privileges
flag to false in case of system temporary table. This modification prevents the
server from unnecessary checking of user privileges to access system temporary
tables.
sql/sql_select.cc:
Fixed bug #30287.
Bugfix for #29015 has been removed: TABLE_SHARE::table_name of system
temporary tables contains full path to table file basename again.
sql/sql_view.cc:
Fixed bug #30287.
Commentary has been added.
added SUPER_ACL check for I_S.TRIGGERS
mysql-test/r/information_schema.result:
result fix
mysql-test/r/information_schema_db.result:
result fix
mysql-test/t/information_schema.test:
test case
sql/sql_show.cc:
added SUPER_ACL check for I_S.TRIGGERS
into adventure.(none):/home/thek/Development/cpp/mysql-5.0-runtime
mysql-test/r/query_cache.result:
Auto merged
mysql-test/t/query_cache.test:
Auto merged
Although the query cache doesn't support retrieval of statements containing
column level access control, it was still possible to cache such statements
thus wasting memory.
This patch extends the access control check on the target tables to avoid
caching a statement with column level restrictions.
mysql-test/r/query_cache.result:
Added test
mysql-test/t/query_cache.test:
Added test
sql/sql_cache.cc:
The function check_table_access leaves the artifact
grant.want_privileges= 1, if a statement refers to tables with column level
privileges. To avoid the statement from being stored into the query cache,
it is enough to check this flag and set 'safe_to_cache_query' to zero.
sql/sql_cache.h:
- Removed 'static' attribute or class methods
- Added THD parameter to process_and_count_tables
HEAP tables can't index BIT fields. Due to this when grouping by such fields is
needed they are converted to a fields of the LONG type when temporary table
is being created. But a side effect of this is that a wrong type of BIT
fields is returned to a client.
Now the JOIN::prepare and the create_distinct_group functions are create
additional hidden copy of BIT fields to preserve original fields untouched.
New hidden fields are used for grouping instead.
mysql-test/t/type_bit.test:
Added a test case for the bug#30245: A wrong type of a BIT field is reported when grouped by it.
mysql-test/r/type_bit.result:
Added a test case for the bug#30245: A wrong type of a BIT field is reported when grouped by it.
sql/sql_select.cc:
Bug#30245: A wrong type of a BIT field is reported when grouped by it.
Now the JOIN::prepare and the create_distinct_group functions are create
additional hidden copy of BIT fields to preserve original fields untouched.
New hidden fields are used for grouping instead.
This is a follow up for the patch for Bug#26162 "Trigger DML ignores low_priority_updates setting", where the stored procedure ignores the session setting of low_priority_updates.
For every table open operation with default write (TL_WRITE_DEFAULT) lock_type, downgrade the lock type to the session setting of low_priority_updates.
sql/lock.cc:
Add late lock_type assertion.
sql/sql_base.cc:
Possibly downgrade lock type to the the session setting of low_priority_updates and also remove early assertion.
include/my_pthread.h:
Fix for Bug#27970 "Fix for bug 24507 makes mysql_install_db fail".
Removed macro NPTL_PTHREAD_EXIT_BUG, because it doesn't work in dynamic
environment. One can switch between NPTL and LT on the fly on Linux.
Added pthread_dummy(ESRCH) for those platforms that don't have pthread_kill.
This ensures that there won't be an error in mysqld.cc where the return value
is being checked from the function call.
mysys/my_thr_init.c:
Check for a Linux is enough. There is an additional test if
NPTL is in use before spwaning the extra thread.
Apply innodb-5.0-ss1696 snapshot
Fixes:
- Bug#20090: InnoDB: Error: trying to declare trx to enter InnoDB
- Bug#23710: crash_commit_before fails if innodb_file_per_table=1
At InnoDB startup consider the case where log scan went beyond
checkpoint_lsn as a crash and initiate crash recovery code path.
- Bug#28781: InnoDB increments auto-increment value incorrectly with ON DUPLICATE KEY UPDATE
We need to do some special AUTOINC handling for the following case:
INSERT INTO t (c1,c2) VALUES(x,y) ON DUPLICATE KEY UPDATE ...
We need to use the AUTOINC counter that was actually used by
MySQL in the UPDATE statement, which can be different from the
value used in the INSERT statement.
- Bug#29097: fsp_get_available_space_in_free_extents() is capped at 4TB
Fix by typecasting the variables before multiplying them, so that the
result of the multiplication is of type "unsigned long long".
- Bug#29155: Innodb "Parallel recovery" is not prevented
Fix by enabling file locking on FreeBSD. It has been disabled because
InnoDB has refused to start on FreeBSD & LinuxThreads, but now it
starts just fine.
innobase/fsp/fsp0fsp.c:
Apply innodb-5.0-ss1696 snapshot
Revision r1614:
branches/5.0:
Merge r1605 from trunk:
Fix Bug#29097 "fsp_get_available_space_in_free_extents() is capped at 4TB"
by typecasting the variables before multiplying them, so that the result of
the multiplication is of type "unsigned long long".
I verified this fix by creating a sparse file of 6TB and forcing InnoDB to
use it without overwriting it with zeroes (by commenting the code that
overwrites :newraw files).
New type ullint is introduced with the sole purpose of shortening
"unsigned long long", please do not define it to something else than
"unsigned long long".
Approved by: Heikki
innobase/include/fsp0fsp.h:
Apply innodb-5.0-ss1696 snapshot
Revision r1614:
branches/5.0:
Merge r1605 from trunk:
Fix Bug#29097 "fsp_get_available_space_in_free_extents() is capped at 4TB"
by typecasting the variables before multiplying them, so that the result of
the multiplication is of type "unsigned long long".
I verified this fix by creating a sparse file of 6TB and forcing InnoDB to
use it without overwriting it with zeroes (by commenting the code that
overwrites :newraw files).
New type ullint is introduced with the sole purpose of shortening
"unsigned long long", please do not define it to something else than
"unsigned long long".
Approved by: Heikki
innobase/include/univ.i:
Apply innodb-5.0-ss1696 snapshot
Revision r1614:
branches/5.0:
Merge r1605 from trunk:
Fix Bug#29097 "fsp_get_available_space_in_free_extents() is capped at 4TB"
by typecasting the variables before multiplying them, so that the result of
the multiplication is of type "unsigned long long".
I verified this fix by creating a sparse file of 6TB and forcing InnoDB to
use it without overwriting it with zeroes (by commenting the code that
overwrites :newraw files).
New type ullint is introduced with the sole purpose of shortening
"unsigned long long", please do not define it to something else than
"unsigned long long".
Approved by: Heikki
innobase/log/log0recv.c:
Apply innodb-5.0-ss1696 snapshot
Revision r1608:
branches/5.0: Bug#23710
Back port of r1607 from trunk
At InnoDB startup consider the case where log scan went beyond checkpoint_lsn as a crash and initiate crash recovery code path.
reviewed by: Heikki
innobase/os/os0file.c:
Apply innodb-5.0-ss1696 snapshot
Revision r1615:
branches/5.0:
Merge r1613 from trunk:
Fix Bug#29155 by enabling file locking on FreeBSD.
It has been disabled because InnoDB has refused to start on
FreeBSD & LinuxThreads, but now it starts just fine.
Approved by: Heikki
innobase/srv/srv0srv.c:
Apply innodb-5.0-ss1696 snapshot
Revision r1552:
branches/5.0:
Fix Bug#20090 as suggested in the bug followup by Heikki.
Approved by: Heikki
innobase/trx/trx0trx.c:
Apply innodb-5.0-ss1696 snapshot
Revision r1596:
branches/5.0: Merge r1595 from trunk:
trx_commit_for_mysql(): Avoid acquiring and releasing kernel_mutex when
trx->sess or trx_dummy_sess is non-NULL.
sql/ha_innodb.cc:
Apply innodb-5.0-ss1696 snapshot
Revision r1614:
branches/5.0:
Merge r1605 from trunk:
Fix Bug#29097 "fsp_get_available_space_in_free_extents() is capped at 4TB"
by typecasting the variables before multiplying them, so that the result of
the multiplication is of type "unsigned long long".
I verified this fix by creating a sparse file of 6TB and forcing InnoDB to
use it without overwriting it with zeroes (by commenting the code that
overwrites :newraw files).
New type ullint is introduced with the sole purpose of shortening
"unsigned long long", please do not define it to something else than
"unsigned long long".
Approved by: Heikki
Revision r1695:
branches/5.0: Merge a change from MySQL AB:
ChangeSet@1.2463.166.1 2007-06-20 19:22:27+03:00 monty@mysql.fi
Allow multiple calls to mysql_server_end()
(Part of fix for Bug 25621 Error in my_thread_global_end(): 1 threads
didn't exit)
Give correct error message if InnoDB table is not found
(This allows us to drop a an innodb table that is not in the InnoDB registery)
ha_innodb.cc:
Give correct error message if InnoDB table is not found.
(This allows us to drop a an innodb table that is not in the InnoDB
registery)
Revision r1606:
branches/5.0: Formatting corrections.
spotted by: Vasil
Revision r1691:
branches/5.0: Merge a change from MySQL AB:
ChangeSet@1.2463.261.1 2007-07-20 14:17:15+03:00 gkodinov@magare.gmz
Bug 29644: alter table hangs if records locked in share mode
by long running transaction
On Windows opened files can't be deleted. There was a special
upgraded lock mode (TL_WRITE instead of TL_WRITE_ALLOW_READ)
in ALTER TABLE to make sure nobody has the table opened
when deleting the old table in ALTER TABLE. This special mode
was causing ALTER TABLE to hang waiting on a lock inside InnoDB.
This special lock is no longer necessary as the server is
closing the tables it needs to delete in ALTER TABLE.
Fixed by removing the special lock.
Note that this also reverses the fix for bug 17264 that deals with
another consequence of this special lock mode being used.
sql/ha_innodb.cc: Bug 29644: reverse the (now excessive) fix
for bug 17264 (but leave the test case).
Revision r1601:
branches/5.0: Fix for bug#28781
We need to do some special AUTOINC handling for the following case:
INSERT INTO t (c1,c2) VALUES(x,y) ON DUPLICATE KEY UPDATE ...
We need to use the AUTOINC counter that was actually used by
MySQL in the UPDATE statement, which can be different from the
value used in the INSERT statement.
approved by: Sunny
Revision r1692:
branches/5.0: Merge a change from MySQL AB:
ChangeSet@1.2463.267.1 2007-07-30 17:14:34+04:00 evgen@local
Bug 24989: The DEADLOCK error is improperly handled by InnoDB.
When innodb detects a deadlock it calls ha_rollback_trans() to rollback the
main transaction. But such action isn't allowed from inside of triggers and
functions. When it happen the 'Explicit or implicit commit' error is thrown
even if there is no commit/rollback statements in the trigger/function. This
leads to the user confusion.
Now the convert_error_code_to_mysql() function doesn't call the
ha_rollback_trans() function directly but rather calls the
mark_transaction_to_rollback function and returns an error.
The sp_rcontext::find_handler() now doesn't allow errors to be caught by the
trigger/function error handlers when the thd->is_fatal_sub_stmt_error flag
is set. Procedures are still allowed to catch such errors.
The sp_rcontext::find_handler function now accepts a THD handle as a parameter.
The transaction_rollback_request and the is_fatal_sub_stmt_error flags are
added to the THD class. The are initialized by the THD class constructor.
Now the ha_autocommit_or_rollback function rolls back main transaction
when not in a sub statement and the thd->transaction_rollback_request
is set.
The THD::restore_sub_statement_state function now resets the
thd->is_fatal_sub_stmt_error flag on exit from a sub-statement.
innodb-big.test, innodb-big.result:
Added a test case for the bug 24989: The DEADLOCK error is improperly
handled by InnoDB.
sql/ha_innodb.cc:
Bug 24989: The DEADLOCK error is improperly handled by InnoDB.
Now the convert_error_code_to_mysql() function doesn't call the
ha_rollback_trans() function directly but rather calls the
mark_transaction_to_rollback function and returns an error.
Revision r1693:
branches/5.0: Merge a change from MySQL AB:
ChangeSet@1.2489.5.1 2007-07-31 17:42:48+04:00 evgen@local
ha_innodb.cc:
Warning fixed.
The bug caused memory corruption for some queries with top OR level
in the WHERE condition if they contained equality predicates and
other sargable predicates in disjunctive parts of the condition.
The corruption happened because the upper bound of the memory
allocated for KEY_FIELD and SARGABLE_PARAM internal structures
containing info about potential lookup keys was calculated incorrectly
in some cases. In particular it was calculated incorrectly when the
WHERE condition was an OR formula with disjuncts being AND formulas
including equalities and other sargable predicates.
mysql-test/r/select.result:
Added a test case for bug #30396.
mysql-test/t/select.test:
Added a test case for bug #30396.
sql/item_cmpfunc.h:
Removed max_members from the COND_EQUAL class as not useful anymore.
sql/sql_base.cc:
Added the max_equal_elems field to the st_select_lex structure.
sql/sql_lex.cc:
Added the max_equal_elems field to the st_select_lex structure.
sql/sql_lex.h:
Added the max_equal_elems field to the st_select_lex structure.
The field contains the maximal number of elements in multiple equalities
built for the query conditions.
sql/sql_select.cc:
Fixed bug #30396.
The bug caused memory corruption for some queries with top OR level
in the WHERE condition if they contained equality predicates and
other sargable predicates in disjunctive parts of the condition.
The corruption happened because the upper bound of the memory
allocated for KEY_FIELD and SARGABLE_PARAM internal structures
containing info about potential lookup keys was calculated incorrectly
in some cases. In particular it was calculated incorrectly when the
WHERE condition was an OR formula with disjuncts being AND formulas
including equalities and other sargable predicates.
The max_equal_elems field to the st_select_lex structure is used now
to calculate the above mentioned upper bound. The field contains the
maximal number of elements in multiple equalities built for the query
conditions.
mysql_ha_open calls mysql_ha_close on the error path (unsupported) to close the (opened) table before inserting it into the tables hash list handler_tables_hash) but mysql_ha_close only closes tables which are on the hash list, causing the table to be left open and locked.
This change moves the table close logic into a separate function that is always called on the error path of mysql_ha_open or on a normal handler close (mysql_ha_close).
mysql-test/r/handler.result:
Bug#25856 test result
mysql-test/t/handler.test:
Bug#25856 test case
sql/sql_handler.cc:
Move the table close logic into a separate function that is always called on the error path of mysql_ha_open or on a normal handler close
ORDER BY is used
The range analysis module did not correctly signal to the
handler that a range represents a ref (EQ_RANGE flag). This causes
non-range queries like
SELECT ... FROM ... WHERE keypart_1=const, ..., keypart_n=const
ORDER BY ... FOR UPDATE
to wait for a lock unneccesarily if another running transaction uses
SELECT ... FOR UPDATE on the same table.
Fixed by setting EQ_RANGE for all range accesses that represent
an equality predicate.
mysql-test/r/innodb_mysql.result:
bug#28570: Test Result
mysql-test/t/innodb_mysql.test:
bug#28570: Test Case
sql/handler.cc:
bug#28570: Updated comment
sql/opt_range.cc:
bug#28570: Removed the criterion that key has to be unique (HA_NOSAME) in
order for the EQ_RANGE flag to be set. It is sufficient that the range
represent a ref access.
Handle out of transaction buffer in TC for INDX lookups
ndb/src/kernel/blocks/ERROR_codes.txt:
Add new error codes for simulating out of transaction buffer memory
ndb/src/kernel/blocks/dbtc/Dbtc.hpp:
Change signature to handle out of buffer
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
Handle otu of transaction buffers in index operations
(TCINDXREQ++)
ndb/src/ndbapi/NdbTransaction.cpp:
Give more info on 4012
ndb/src/ndbapi/ndberror.c:
Add new error code
ndb/test/ndbapi/testIndex.cpp:
add tests
ndb/test/run-test/daily-basic-tests.txt:
add tests
sql/ha_ndbcluster.cc:
Set correct status
