In this commit we are adding three more status variable to SHOW SLAVE
STATUS. Slave_DDL_Events and Slave_Non_Transactional_Events.
Slave_DDL_Groups:- This status variable counts the occurrence of DDL
statements
Slave_Non_Transactional_Groups:- This variable count the occurrence
of non-transnational event group.
Slave_Transactional_Groups:- This variable count the occurrence
of transnational event group.
Patch Credit:- Kristian Nielsen
MariaDB adjustments.
mysqltest.cc : Allow 12 error codes at --error
wait_until_connected_again.inc: Replace numeric error codes with symbols
mysqltest.test: Add error codes to test that tests too many errorcodes
wait_until_connected_again issues 'SHOW STATUS' query repeatedly
until mysqld replies without errors.
However, SHOW STATUS is treated specially by wsrep in that it is
allowed to proceed even if wsrep is not yet in ready state. As a
consequence, after returning from wait_until_connected_again,
wsrep may not be ready yet and subsequent queries may fail with
error "1047 WSREP has not yet prepared node for application use".
To avoid those errors, the patch includes wait_wsrep_ready.inc at
the end of the wait_until_connected_again.
galera SST tests have a debug part, but we don't want to limit them
to fulltest2 builder. So, add support for test files that
have a debug part:
* add maybe_debug.inc and maybe_debug.combinations
* 'debug' combination is run when debug is available
* 'release' combination is run otherwise
* test wraps debug parts in if($with_debug) { ... }
* and creates ,debug.rdiff for debug results
InnoDB in Debian uses utf8mb4 as default character set since
version 10.0.20-2. This leads to major pain due to keys longer
than 767 bytes.
MariaDB 10.2 (and MySQL 5.7) introduced the setting
innodb_default_row_format that is DYNAMIC by default. These
versions also changed the default values of the parameters
innodb_large_prefix=ON and innodb_file_format=Barracuda.
This would allow longer column index prefixes to be created.
The original purpose of these parameters was to allow InnoDB
to be downgraded to MySQL 5.1, which is long out of support.
Every InnoDB version since MySQL 5.5 does support operation
with the relaxed limits.
We backport the parameter innodb_default_row_format to
MariaDB 10.1, but we will keep its default value at COMPACT.
This allows MariaDB 10.1 to be configured so that CREATE TABLE
is less likely to encounter a problem with the limitation:
loose_innodb_large_prefix=ON
loose_innodb_default_row_format=DYNAMIC
(Note that the setting innodb_large_prefix was deprecated in
MariaDB 10.2 and removed in MariaDB 10.3.)
The only observable difference in the behaviour with the default
settings should be that ROW_FORMAT=DYNAMIC tables can be created
both in the system tablespace and in .ibd files, no matter what
innodb_file_format has been assigned to. Unlike MariaDB 10.2,
we are not changing the default value of innodb_file_format,
so ROW_FORMAT=COMPRESSED tables cannot be created without
changing the parameter.
Fix and enable some of the tests; some remain disabled.
The tests innodb_gis.rtree_old and innodb_gis.row_format
duplicated some versions of the test main.gis-rtree.
Instead of duplicating, source that test, in a new test
innodb_gis.innodb_gis_rtree.
Introduce innodb_row_format.combinations. Due to this,
ROW_FORMAT=COMPRESSED will not be covered in some tests
where it is covered in MySQL 5.7.
trx_undo_page_report_modify(): For SPATIAL INDEX, keep logging
updated off-page columns twice, so that
the minimum bounding rectangle (MBR) will be logged.
Avoiding the redundant logging would require larger changes
to the undo log format.
row_build_index_entry_low(): Handle SPATIAL_UNKNOWN more robustly,
by refusing to purge the record from the spatial index.
We can get this code when processing old undo log from 10.2.10 or
10.2.11 (the releases affected by MDEV-14799, which was a regression
from MDEV-14051).
* don't use Env module in tests, use $ENV{xxx} instead
* collateral changes:
** $file in the error message was unset
** $file in the other error message was unset too :)
** source file arguments are conventionally upper-cased
** abort the test (die) on error, don't just echo/exit
The InnoDB background DROP TABLE queue is something that we should
really remove, but are unable to until we remove dict_operation_lock
so that DDL and DML operations can be combined in a single transaction.
Because the queue is not persistent, it is not crash-safe. We should
in some way ensure that the deferred-dropped tables will be dropped
after server restart.
The existence of two separate transactions complicates the error handling
of CREATE TABLE...SELECT. We should really not break locks in DROP TABLE.
Our solution to these problems is to rename the table to a temporary
name, and to drop such-named tables on InnoDB startup. Also, the
queue will use table IDs instead of names from now on.
check-testcase.test: Ignore #sql-ib*.ibd files, because tables may enter
the background DROP TABLE queue shortly before the test finishes.
innodb.drop_table_background: Test CREATE...SELECT and the creation of
tables whose file name starts with #sql-ib.
innodb.alter_crash: Adjust the recovery, now that the #sql-ib tables
will be dropped on InnoDB startup.
row_mysql_drop_garbage_tables(): New function, to drop all #sql-ib tables
on InnoDB startup.
row_drop_table_for_mysql_in_background(): Remove an unnecessary and
misplaced call to log_buffer_flush_to_disk(). (The call should have been
after the transaction commit. We do not care about flushing the redo log
here, because the table would be dropped again at server startup.)
Remove the entry from the list after the table no longer exists.
If server shutdown has been initiated, empty the list without actually
dropping any tables. They will be dropped again on startup.
row_drop_table_for_mysql(): Do not call lock_remove_all_on_table().
Instead, if locks exist, defer the DROP TABLE until they do not exist.
If the table name does not start with #sql-ib, rename it to that prefix
before adding it to the background DROP TABLE queue.
Part of MDEV-13073 AliSQL Optimize performance of semisync
Did the following renames to match other similar variables
key_ss_mutex_LOCK_binlog_ > key_LOCK_bing
key_ss_cond_COND_binlog_send_ -> key_COND_binlog_send
COND_binlog_send_ -> COND_binlog_send
LOCK_binlog_ -> LOCK_binlog
debian/mariadb-server-10.2.install does not install semisync libs.
* Note: breaking change; since this commit, a plugin that has
worked so far might get rejected due to plugin maturity
* mariabackup is not affected (allows all plugins)
* VERSION file defines SERVER_MATURITY, which defines the
corresponding numeric value as SERVER_MATURITY_LEVEL in
include/mysql_version.h
* The default value for 'plugin_maturity' is SERVER_MATURITY_LEVEL - 1
* Logs a warning if a plugin has maturity lower than
SERVER_MATURITY_LEVEL
* Tests suppress the plugin maturity warning
* Tests use --plugin-maturity=unknown by default so as not to fail
due to the stricter plugin maturity handling
* Note: breaking change; since this commit, a plugin that has
worked so far might get rejected due to plugin maturity
* mariabackup is not affected (allows all plugins)
* VERSION file defines SERVER_MATURITY, which defines the
corresponding numeric value as SERVER_MATURITY_LEVEL in
include/mysql_version.h
* The default value for 'plugin_maturity' is SERVER_MATURITY_LEVEL - 1
* Logs a warning if a plugin has maturity lower than
SERVER_MATURITY_LEVEL
* Tests suppress the plugin maturity warning
* Tests use --plugin-maturity=unknown by default so as not to fail
due to the stricter plugin maturity handling
Problem was that Binlog_checkpoint can happen at random times.
Fixed by not write binlog_checkpoint for the rpl_log test.
Other things:
- Removed not used variable "$keep_gtid_events"
- Added option for show_binlog_events to skip binlog_checkpoint
As reported in MDEV-11969 "there's no way to ditch knowledge" about some
domain that is no longer updated on a server. Besides being of annoyance to
clutter output in DBA console stale domains can prevent the slave
to connect the master as MDEV-12012 witnesses.
What domain is obsolete must be evaluated by the user (DBA) according
to whether the domain info is still relevant and will the domain ever
receive any update.
This patch introduces a method to discard obsolete gtid domains from
the server binlog state. The removal requires no event group from such
domain present in existing binlog files though. If there are any the
containing logs must be first PURGEd in order for
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
succeed. Otherwise the command returns an error.
The list of obsolete domains can be computed through
intersecting two sets - the earliest (first) binlog's Gtid_list
and the current value of @@global.gtid_binlog_state - and extracting
the domain id components from the intersection list items.
The new DELETE_DOMAIN_ID featured FLUSH continues to rotate binlog
omitting the deleted domains from the active binlog file's Gtid_list.
Notice though when the command is ineffective - that none of requested to delete
domain exists in the binlog state - rotation does not occur.
Obsolete domain deletion is not harmful for connected slaves as long
as master side binlog files *purge* is synchronized with FLUSH-DELETE_DOMAIN_ID.
The slaves must have the last event from purged files processed as usual,
in order not to bump later into requesting a gtid from a file which
was already gone.
While the command is not replicated (as ordinary FLUSH BINLOG LOGS is)
slaves, even though having extra domains, won't suffer from reconnection errors
thanks to master-slave gtid connection protocol allowing the master
to be ignorant about a gtid domain.
Should at failover such slave to be promoted into master role it may run
the ex-master's
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
to clean its own binlog state.
NOTES.
suite/perfschema/r/start_server_low_digest.result
is re-recorded as consequence of internal parser codes changes.
