enabled)
Before this fix, the lexer and parser would treat the ';' character as a
different token (either ';' or END_OF_INPUT), based on convoluted logic,
which failed in simple cases where a stored procedure is implemented as a
single statement, and used in a multi query.
With this fix:
- the character ';' is always parsed as a ';' token in the lexer,
- parsing multi queries is implemented in the parser, in the 'query:' rules,
- the value of thd->client_capabilities, which is the capabilities
negotiated between the client and the server during bootstrap,
is immutable and not arbitrarily modified during parsing (which was the
root cause of the bug)
slave
The stored-routine code took the contents of the (lowest) parser
and copied it directly to the binlog, which causes problems if there
is a special case of interpretation at the parser level -- which
there is, in the "/*!VER */" comments. The trailing "*/" caused
errors on the slave, naturally.
Now, since by that point we have /properly/ created parse-tree (as
the rest of the server should do!) for the stored-routine CREATE, we
can construct a perfect statement from that information, instead of
writing uncertain information from an unknown parser state.
Fortunately, there's already a function nearby that does exactly
that.
---
Update for Bug#36570. Qualify routine names with db name when
writing to the binlog ONLY if the source text is qualified.
Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.
The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.
Code generation has been fixed to produce the missing h_pop/c_pop
instructions.
Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.
When the server was out of memory it crashed because of invalid memory access.
This patch adds detection for failed memory allocations and make the server
output a proper error message.
Bug#29816 Syntactically wrong query fails with misleading error message
The core problem is that an SQL-invoked function name can be a <schema
qualified routine name> that contains no <schema name>, but the mysql
parser insists that all stored procedures (function, procedures and
triggers) must have a <schema name>, which is not true for functions.
This problem is especially visible when trying to create a function
or when a query contains a syntax error after a function call (in the
same query), both will fail with a "No database selected" message if
the session is not attached to a particular schema, but the first
one should succeed and the second fail with a "syntax error" message.
Part of the fix is to revamp the sp name handling so that a schema
name may be omitted for functions -- this means that the internal
function name representation may not have a dot, which represents
that the function doesn't have a schema name. The other part is
to place schema checks after the type (function, trigger or procedure)
of the routine is known.
causes full table lock on innodb table.
Also fixes Bug#28502 Triggers that update another innodb table
will block on X lock unnecessarily (duplciate).
Code review fixes.
Both bugs' synopses are misleading: InnoDB table is
not X locked. The statements, however, cannot proceed concurrently,
but this happens due to lock conflicts for tables used in triggers,
not for the InnoDB table.
If a user had an InnoDB table, and two triggers, AFTER UPDATE and
AFTER INSERT, competing for different resources (e.g. two distinct
MyISAM tables), then these two triggers would not be able to execute
concurrently. Moreover, INSERTS/UPDATES of the InnoDB table would
not be able to run concurrently.
The problem had other side-effects (see respective bug reports).
This behavior was a consequence of a shortcoming of the pre-locking
algorithm, which would not distinguish between different DML operations
(e.g. INSERT and DELETE) and pre-lock all the tables
that are used by any trigger defined on the subject table.
The idea of the fix is to extend the pre-locking algorithm to keep track,
for each table, what DML operation it is used for and not
load triggers that are known to never be fired.
- In some cases, flow control optimization implemented in sp::optimize
removes hreturn instructions, causing SQL exception handlers to:
* never return
* execute wrong logic
- This patch overrides default short cut optimization on hreturn instructions
to avoid this problem.
The issue found with bug 25411 is due to the function skip_rear_comments()
which damages the source code while implementing a work around.
The root cause of the problem is in the lexical analyser, which does not
process special comments properly.
For special comments like :
[1] aaa /*!50000 bbb */ ccc
since 5.0 is a version older that the current code, the parser is in lining
the content of the special comment, so that the query to process is
[2] aaa bbb ccc
However, the text of the query captured when processing a stored procedure,
stored function or trigger (or event in 5.1), can be after rebuilding it:
[3] aaa bbb */ ccc
which is wrong.
To fix bug 25411 properly, the lexical analyser needs to return [2] when
in lining special comments.
In order to implement this, some preliminary cleanup is required in the code,
which is implemented by this patch.
Before this change, the structure named LEX (or st_lex) contains attributes
that belong to lexical analysis, as well as attributes that represents the
abstract syntax tree (AST) of a statement.
Creating a new LEX structure for each statements (which makes sense for the
AST part) also re-initialized the lexical analysis phase each time, which
is conceptually wrong.
With this patch, the previous st_lex structure has been split in two:
- st_lex represents the Abstract Syntax Tree for a statement. The name "lex"
has not been changed to avoid a bigger impact in the code base.
- class lex_input_stream represents the internal state of the lexical
analyser, which by definition should *not* be reinitialized when parsing
multiple statements from the same input stream.
This change is a pre-requisite for bug 25411, since the implementation of
lex_input_stream will later improve to deal properly with special comments,
and this processing can not be done with the current implementation of
sp_head::reset_lex and sp_head::restore_lex, which interfere with the lexer.
This change set alone does not fix bug 25411.
- mysqldump executes a SHOW CREATE VIEW statement to generate the text
that it outputs. When the function name is retrieved it's database
name is unconditionally prepended. This change causes the function's
database name to be prepended only when it was used to define the
function.
Before this fix, the parser would accept illegal code in SQL exceptions
handlers, that later causes the runtime to crash when executing the code,
due to memory violations in the exception handler stack.
The root cause of the problem is instructions within an exception handler
that jumps to code located outside of the handler. This is illegal according
to the SQL 2003 standard, since labels located outside the handler are not
supposed to be visible (they are "out of scope"), so any instruction that
jumps to these labels, like ITERATE or LEAVE, should not parse.
The section of the standard that is relevant for this is :
SQL:2003 SQL/PSM (ISO/IEC 9075-4:2003)
section 13.1 <compound statement>,
syntax rule 4
<quote>
The scope of the <beginning label> is CS excluding every <SQL schema
statement> contained in CS and excluding every
<local handler declaration list> contained in CS. <beginning label> shall
not be equivalent to any other <beginning label>s within that scope.
</quote>
With this fix, the C++ class sp_pcontext, which represent the "parsing
context" tree (a.k.a symbol table) of a stored procedure, has been changed
as follows:
- constructors have been cleaned up, so that only building a root node for
the tree is public; building nodes inside a tree is not public.
- a new member, m_label_scope, indicates if a given syntactic context
belongs to a DECLARE HANDLER block,
- label resolution, in the method find_label(), has been changed to
implement the restriction of scope regarding labels used in a compound
statement.
The actions in the parser, when parsing the body of a SQL exception handler,
have been changed as follows:
- the implementation of an exception handler (DECLARE HANDLER) now creates
explicitly a new sp_pcontext, to isolate the code inside the handler from
the containing compound statement context.
- registering exception handlers as a result occurs in the parent context,
see the rule sp_hcond_element
- the code in sp_hcond_list has been cleaned up, to avoid code duplication
In addition, the flags IN_SIMPLE_CASE and IN_HANDLER, declared in sp_head.h
have been removed, since they are unused and broken by design (as seen with
Bug 19194 (Right recursion in parser for CASE causes excessive stack usage,
limitation), representing a stack in a single flag is not possible.
Tests in sp-error have been added to show that illegal constructs are now
rejected.
Tests in sp have been added for code coverage, to show that ITERATE or LEAVE
statements are legal when jumping to a label in scope, inside the body of
an exception handler.
Bug 18914 (Calling certain SPs from triggers fail)
Bug 20713 (Functions will not not continue for SQLSTATE VALUE '42S02')
Bug 21825 (Incorrect message error deleting records in a table with a
trigger for inserting)
Bug 22580 (DROP TABLE in nested stored procedure causes strange dependency
error)
Bug 25345 (Cursors from Functions)
This fix resolves a long standing issue originally reported with bug 8407,
which affect the behavior of Stored Procedures, Stored Functions and Trigger
in many different ways, causing symptoms reported by all the bugs listed.
In all cases, the root cause of the problem traces back to 8407 and how the
server locks tables involved with sub statements.
Prior to this fix, the implementation of stored routines would:
- compute the transitive closure of all the tables referenced by a top level
statement
- open and lock all the tables involved
- execute the top level statement
"transitive closure of tables" means collecting:
- all the tables,
- all the stored functions,
- all the views,
- all the table triggers
- all the stored procedures
involved, and recursively inspect these objects definition to find more
references to more objects, until the list of every object referenced does
not grow any more.
This mechanism is known as "pre-locking" tables before execution.
The motivation for locking all the tables (possibly) used at once is to
prevent dead locks.
One problem with this approach is that, if the execution path the code
really takes during runtime does not use a given table, and if the table is
missing, the server would not execute the statement.
This in particular has a major impact on triggers, since a missing table
referenced by an update/delete trigger would prevent an insert trigger to run.
Another problem is that stored routines might define SQL exception handlers
to deal with missing tables, but the server implementation would never give
user code a chance to execute this logic, since the routine is never
executed when a missing table cause the pre-locking code to fail.
With this fix, the internal implementation of the pre-locking code has been
relaxed of some constraints, so that failure to open a table does not
necessarily prevent execution of a stored routine.
In particular, the pre-locking mechanism is now behaving as follows:
1) the first step, to compute the transitive closure of all the tables
possibly referenced by a statement, is unchanged.
2) the next step, which is to open all the tables involved, only attempts
to open the tables added by the pre-locking code, but silently fails without
reporting any error or invoking any exception handler is the table is not
present. This is achieved by trapping internal errors with
Prelock_error_handler
3) the locking step only locks tables that were successfully opened.
4) when executing sub statements, the list of tables used by each statements
is evaluated as before. The tables needed by the sub statement are expected
to be already opened and locked. Statement referencing tables that were not
opened in step 2) will fail to find the table in the open list, and only at
this point will execution of the user code fail.
5) when a runtime exception is raised at 4), the instruction continuation
destination (the next instruction to execute in case of SQL continue
handlers) is evaluated.
This is achieved with sp_instr::exec_open_and_lock_tables()
6) if a user exception handler is present in the stored routine, that
handler is invoked as usual, so that ER_NO_SUCH_TABLE exceptions can be
trapped by stored routines. If no handler exists, then the runtime execution
will fail as expected.
With all these changes, a side effect is that view security is impacted, in
two different ways.
First, a view defined as "select stored_function()", where the stored
function references a table that may not exist, is considered valid.
The rationale is that, because the stored function might trap exceptions
during execution and still return a valid result, there is no way to decide
when the view is created if a missing table really cause the view to be invalid.
Secondly, testing for existence of tables is now done later during
execution. View security, which consist of trapping errors and return a
generic ER_VIEW_INVALID (to prevent disclosing information) was only
implemented at very specific phases covering *opening* tables, but not
covering the runtime execution. Because of this existing limitation,
errors that were previously trapped and converted into ER_VIEW_INVALID are
not trapped, causing table names to be reported to the user.
This change is exposing an existing problem, which is independent and will
be resolved separately.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
limitation)
Note to the reviewer
====================
Warning: reviewing this patch is somewhat involved.
Due to the nature of several issues all affecting the same area,
fixing separately each issue is not practical, since each fix can not be
implemented and tested independently.
In particular, the issues with
- rule recursion
- nested case statements
- forward jump resolution (backpatch list)
are tightly coupled (see below).
Definitions
===========
The expression
CASE expr
WHEN expr THEN expr
WHEN expr THEN expr
...
END
is a "Simple Case Expression".
The expression
CASE
WHEN expr THEN expr
WHEN expr THEN expr
...
END
is a "Searched Case Expression".
The statement
CASE expr
WHEN expr THEN stmts
WHEN expr THEN stmts
...
END CASE
is a "Simple Case Statement".
The statement
CASE
WHEN expr THEN stmts
WHEN expr THEN stmts
...
END CASE
is a "Searched Case Statement".
A "Left Recursive" rule is like
list:
element
| list element
;
A "Right Recursive" rule is like
list:
element
| element list
;
Left and right recursion produces the same language, the difference only
affects the *order* in which the text is parsed.
In a descendant parser (usually written manually), right recursion works
very well, and is typically implemented with a while loop.
In an ascendant parser (yacc/bison) left recursion works very well,
and is implemented naturally by the parser stack.
In both cases, using the wrong type or recursion is very bad and should be
avoided, as it causes technical issues with the parser implementation.
Before this change
==================
The "Simple Case Expression" and "Searched Case Expression" were both
implemented by the "when_list" and "when_list2" rules, which are left
recursive (ok).
These rules, however, used lex->when_list instead of using the parser stack,
which is more complex that necessary, and potentially dangerous because
of other rules using THD::reset_lex.
The "Simple Case Statement" and "Searched Case Statements" were implemented
by the "sp_case", "sp_whens" and in part by "sp_proc_stmt" rules.
Both cases were right recursive (bad).
The grammar involved was convoluted, and is assumed to be the results of
tweaks to get the code generation to work, but is not what someone would
naturally write.
In addition, using a common rule for both "Simple" and "Searched" case
statements was implemented with sp_head::m_flags |= IN_SIMPLE_CASE,
which is a flag and not a stack, and therefore does not take into account
*nested* case statements. This leads to incorrect generated code, and either
a server crash or an incorrect result.
With regards to the backpatch mechanism, a *different* backpatch list was
created for each jump from "WHEN expr THEN stmt" to "END CASE", which
relied on the grammar to be right recursive.
This is a mis-use of the backpatch list, since this list can resolve
multiple references to the same target at once.
The optimizer algorithm used to detect dead code in the "assembly" SQL
instructions, implemented by sp_head::opt_mark(uint ip), was recursive
in some cases (a conditional jump pointing forward to another conditional
jump).
In case of specially crafted code, like
- a long list of "IF expr THEN stmt END IF"
- a long CASE statement
this would actually cause a server crash with a stack overflow.
In general, having a stack that grows proportionally with user data (the
SQL code given by the client in a CREATE PROCEDURE) is to be avoided.
In debug builds only, creating a SP / SF / Trigger which had a significant
amount of code would spend --literally-- several minutes in sp_head::create,
because of the debug code involved with DBUG_PRINT("info", ("Code %s ...
There are several issues with this code:
- in a CASE with 5 000 WHEN, there are 15 000 instructions generated,
which create a sting representation of the code which is 500 000 bytes
long,
- using a String instead of an io stream causes performances to degrade
to a total server freeze, as time is spent doing realloc of a buffer
always too short,
- Printing a 500 000 long string in the debug log is too verbose,
- Generating this string even when DBUG_PRINT is off is useless,
- Having code that potentially can affect the server behavior, used with
#ifdef / #endif is useful in some cases, but is also a bad practice.
After this change
=================
"Case Expressions" (both simple and searched) have been simplified to
not use LEX::when_list, which has been removed.
Considering all the issues affecting case statements, the grammar for these
has been totally re written.
The existing actions, used to generate "assembly" sp_inst* code, have been
preserved but moved in the new grammar, with the following changes:
a) Bison rules are no longer shared between "Simple" and "Searched" case
statements, because a stack instead of a flag is required to handle them.
Nested statements are handled naturally by the parser stack, which by
definition uses the correct rule in the correct context.
Nested statements of the opposite type (simple vs searched) works correctly.
The flag sp_head::IN_SIMPLE_CASE is no longer used.
This is a step towards resolution of WL#2999, which correctly identified
that temporary parsing flags do not belong to sp_head.
The code in the action is shared by mean of the case_stmt_action_xxx()
helpers.
b) The backpatch mechanism, used to resolve forward jumps in the generated
code, has been changed to:
- create a label for the instruction following 'END CASE',
- register each jump at the end of a "WHEN expr THEN stmt" in a *unique*
backpatch list associated with the 'END CASE' label
- resolve all the forward jumps for this label at once.
In addition, the code involving backpatch has been commented, so that a
reader can now understand by reading matching "Registering" and "Resolving"
comments how the forward jumps are resolved and what target they resolve to,
as this is far from evident when reading the code alone.
The implementation of sp_head::opt_mark() has been revised to avoid
recursive calls from jump instructions, and instead add the jump location
to the list of paths to explore during the flow analysis of the instruction
graph, with a call to sp_head::add_mark_lead().
In addition, the flow analysis will stop if an instruction has already
been marked as reachable, which the previous code failed to do in the
recursive case.
sp_head::opt_mark() is now private, to prevent new calls to this method from
being introduced.
The debug code present in sp_head::create() has been removed.
Considering that SHOW PROCEDURE CODE is also available in debug builds,
and can be used anytime regardless of the trace level, as opposed to
"CREATE PROCEDURE" time and only if the trace was on,
removing the code actually makes debugging easier (usable trace).
Tests have been written to cover the parser overflow (big CASE),
and to cover nested CASE statements.
erroneous check
Problem: Actually there were two problems in the server code. The check
for SQLCOM_FLUSH in SF/Triggers were not according to the existing
architecture which uses sp_get_flags_for_command() from sp_head.cc .
This function was also missing a check for SQLCOM_FLUSH which has a
problem combined with prelocking. This changeset fixes both of these
deficiencies as well as the erroneous check in
sp_head::is_not_allowed_in_function() which was a copy&paste error.
Fix for BUG#16676: Database CHARSET not used for stored procedures
The problem in BUG#16211 is that CHARSET-clause of the return type for
stored functions is just ignored.
The problem in BUG#16676 is that if character set is not explicitly
specified for sp-variable, the server character set is used instead
of the database one.
The fix has two parts:
- always store CHARSET-clause of the return type along with the
type definition in mysql.proc.returns column. "Always" means that
CHARSET-clause is appended even if it has not been explicitly
specified in CREATE FUNCTION statement (this affects BUG#16211 only).
Storing CHARSET-clause if it is not specified is essential to avoid
changing character set if the database character set is altered in
the future.
NOTE: this change is not backward compatible with the previous releases.
- use database default character set if CHARSET-clause is not explicitly
specified (this affects both BUG#16211 and BUG#16676).
NOTE: this also breaks backward compatibility.
context.
Routine arguments were evaluated in the security context of the routine
itself, not in the caller's context.
The bug is fixed the following way:
- Item_func_sp::find_and_check_access() has been split into two
functions: Item_func_sp::find_and_check_access() itself only
finds the function and check that the caller have EXECUTE privilege
on it. New function set_routine_security_ctx() changes security
context for SUID routines and checks that definer have EXECUTE
privilege too.
- new function sp_head::execute_trigger() is called from
Table_triggers_list::process_triggers() instead of
sp_head::execute_function(), and is effectively just as the
sp_head::execute_function() is, with all non-trigger related code
removed, and added trigger-specific security context switch.
- call to Item_func_sp::find_and_check_access() stays outside
of sp_head::execute_function(), and there is a code in
sql_parse.cc before the call to sp_head::execute_procedure() that
checks that the caller have EXECUTE privilege, but both
sp_head::execute_function() and sp_head::execute_procedure() call
set_routine_security_ctx() after evaluating their parameters,
and restore the context after the body is executed.
Bug#19022 "Memory bug when switching db during trigger execution"
Bug#17199 "Problem when view calls function from another database."
Bug#18444 "Fully qualified stored function names don't work correctly in
SELECT statements"
Documentation note: this patch introduces a change in behaviour of prepared
statements.
This patch adds a few new invariants with regard to how THD::db should
be used. These invariants should be preserved in future:
- one should never refer to THD::db by pointer and always make a deep copy
(strmake, strdup)
- one should never compare two databases by pointer, but use strncmp or
my_strncasecmp
- TABLE_LIST object table->db should be always initialized in the parser or
by creator of the object.
For prepared statements it means that if the current database is changed
after a statement is prepared, the database that was current at prepare
remains active. This also means that you can not prepare a statement that
implicitly refers to the current database if the latter is not set.
This is not documented, and therefore needs documentation. This is NOT a
change in behavior for almost all SQL statements except:
- ALTER TABLE t1 RENAME t2
- OPTIMIZE TABLE t1
- ANALYZE TABLE t1
- TRUNCATE TABLE t1 --
until this patch t1 or t2 could be evaluated at the first execution of
prepared statement.
CURRENT_DATABASE() still works OK and is evaluated at every execution
of prepared statement.
Note, that in stored routines this is not an issue as the default
database is the database of the stored procedure and "use" statement
is prohibited in stored routines.
This patch makes obsolete the use of check_db_used (it was never used in the
old code too) and all other places that check for table->db and assign it
from THD::db if it's NULL, except the parser.
How this patch was created: THD::{db,db_length} were replaced with a
LEX_STRING, THD::db. All the places that refer to THD::{db,db_length} were
manually checked and:
- if the place uses thd->db by pointer, it was fixed to make a deep copy
- if a place compared two db pointers, it was fixed to compare them by value
(via strcmp/my_strcasecmp, whatever was approproate)
Then this intermediate patch was used to write a smaller patch that does the
same thing but without a rename.
TODO in 5.1:
- remove check_db_used
- deploy THD::set_db in mysql_change_db
See also comments to individual files.
Stored procedure execution sometimes placed the address of auto variables
in the list of Item changes to undo in THD::rollback_item_tree_changes().
This could cause stack corruption.
Removed sp-goto.test, sp-goto.result and all (disabled) GOTO code.
Also removed some related code that's not needed any more (no possible
unresolved label references any more, so no need to check for them).
NB: Keeping the ER_SP_GOTO_IN_HNDLR in errmsg.txt; it might become useful
in the future, and removing it (and thus re-enumerating error codes)
might upset things. (Anything referring to explicit error codes.)
Also added comments, and fixing some coding style (mostly in comments too).
There are no functional changes, so no tests or documentation needed.
(This was originally part of a bugfix, but it was decided to not include this
in that patch; instead it's done separately.)
The idea is to add DEFINER-clause in CREATE PROCEDURE and CREATE FUNCTION
statements. Almost all support of definer in stored routines had been already
done before this patch.
NOTE: this patch changes behaviour of dumping stored routines in mysqldump.
Before this patch, mysqldump did not dump DEFINER-clause for stored routines
and this was documented behaviour. In order to get full information about stored
routines, one should have dumped mysql.proc table. This patch changes this
behaviour, so that DEFINER-clause is dumped.
Since DEFINER-clause is not supported in CREATE PROCEDURE | FUNCTION statements
before this patch, the clause is covered by additional version-specific comments.
After trying multiple inheritance (to messy and hard make it work) and
sublassing jump_if_not (worked, but ugly), decided to on this solution
instead:
Inserting an abstract sp_instr_opt_meta class as parent for all instructions
with destinations makes it possible to handle a continuation pointer for
sp_instr_set_case_expr too.
Note: No special test case; the fix is captured by the changed behaviour of
bug14643_2, and bug14498_4 (formerly disabled), in sp.test.
Second version.
The problem was that the optimizer didn't work correctly with forwards jumps
to "no-op" hpop and cpop instructions.
Don't generate "no-op" instructions (hpop 0 and cpop 0), it isn't actually
necessary.
- Fixed tests
- Optimized new code
- Fixed some unlikely core dumps
- Better bug fixes for:
- #14397 - OPTIMIZE TABLE with an open HANDLER causes a crash
- #14850 (ERROR 1062 when a quering a view using a Group By on a column that can be null
according to the standard.
The idea is to use Field-classes to implement stored routines
variables. Also, we should provide facade to Item-hierarchy
by Item_field class (it is necessary, since SRVs take part
in expressions).
The patch fixes the following bugs:
- BUG#8702: Stored Procedures: No Error/Warning shown for inappropriate data
type matching;
- BUG#8768: Functions: For any unsigned data type, -ve values can be passed
and returned;
- BUG#8769: Functions: For Int datatypes, out of range values can be passed
and returned;
- BUG#9078: STORED PROCDURE: Decimal digits are not displayed when we use
DECIMAL datatype;
- BUG#9572: Stored procedures: variable type declarations ignored;
- BUG#12903: upper function does not work inside a function;
- BUG#13705: parameters to stored procedures are not verified;
- BUG#13808: ENUM type stored procedure parameter accepts non-enumerated
data;
- BUG#13909: Varchar Stored Procedure Parameter always BINARY string (ignores
CHARACTER SET);
- BUG#14161: Stored procedure cannot retrieve bigint unsigned;
- BUG#14188: BINARY variables have no 0x00 padding;
- BUG#15148: Stored procedure variables accept non-scalar values;
impossible view security".
We should not expose names of tables which are explicitly or implicitly (via
routine or trigger) used by view even if we find that they are missing.
So during building of list of prelocked tables for statement we track which
routines (and therefore tables for these routines) are used from views. We
mark elements of LEX::routines set which correspond to routines used in views
by setting Sroutine_hash_entry::belong_to_view member to point to TABLE_LIST
object for topmost view which uses routine. We propagate this mark to all
routines which are used by this routine and which we add to this set. We also
mark tables used by such routine which we add to the list of tables for
prelocking as belonging to this view.
Since long, the compiled code of stored routines has been printed in the trace file
when starting mysqld with the "--debug" flag. (At creation time only, and only in
debug builds of course.) This has been helpful when debugging stored procedure
execution, but it's a bit awkward to use. Also, the printing of some of the
instructions is a bit terse, in particular for sp_instr_stmt where only the command
code was printed.
This improves the printout of several of the instructions, and adds the debugging-
only commands "show procedure code <name>" and "show function code <name>".
(In non-debug builds they are not available.)
The crash mentioned in original bug report is already prevented by one
of previous patches (fix for bug #13343 "CREATE|etc TRIGGER|VIEW|USER
don't commit the transaction (inconsistency)"), this patch only improve
error returning.
The problem was to continue at the right place in the code after the
test expression in a flow control statement fails with an exception
(internally, the test in sp_instr_jump_if_not), and the exception is
caught by a continue handler. Execution must then be resumed after the
the entire flow control statement (END IF, END WHILE, etc).
cursor is interpreted latin1 character and Bug#9819 "Cursors: Mysql Server
Crash while fetching from table with 5 million records."
A fix for a possible memory leak when fetching into an SP cursor
in a long loop.
The patch uses a common implementation of cursors in the binary protocol and
in stored procedures and implements materialized cursors.
For implementation details, see comments in sql_cursor.cc
