The POINT data type is being treated just like any other
geometry data type in InnoDB. The fixed-length data type
DATA_POINT had been introduced in WL#6942 based on a
misunderstanding and without appropriate review.
Because of fundamental design problems (such as a
DEFAULT POINT(0 0) value secretly introduced by InnoDB),
the code was disabled in Oracle Bug#20415831 fix.
This patch removes the dead code and definitions that were
left behind by the Oracle Bug#20415831 patch.
When it comes to DEFAULT values of columns, InnoDB is imposing both
unnecessary and insufficient conditions on whether ALGORITHM=INPLACE
should be allowed for ALTER TABLE.
When changing an existing column to NOT NULL, any NULL values in the
columns only get a special treatment if the column is changed to an
AUTO_INCREMENT column (which is not supported by ALGORITHM=INPLACE)
or the column type is TIMESTAMP. In all other cases, an error
must be reported for the failure to convert a NULL value to NOT NULL.
InnoDB was unnecessarily interested in whether the DEFAULT value
is not constant when altering other than TIMESTAMP columns. Also,
when changing a TIMESTAMP column to NOT NULL, InnoDB was performing
an insufficient check, and it was incorrectly allowing a constant
DEFAULT value while not being able to replace NULL values with that
constant value.
Furthermore, in ADD COLUMN, InnoDB is unnecessarily rejecting certain
nondeterministic DEFAULT expressions (depending on the session
parameters or the current time).
When the btr_search_latch was split into an array of latches
in MySQL 5.7.8 as part of the Oracle Bug#20985298 fix, the "caching"
of the latch across storage engine API calls was removed, and
the field trx->has_search_latch would only be set during a short
time frame in the execution of row_search_mvcc(), which was
formerly called row_search_for_mysql().
This means that the column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_LATCHED will always
report 0. That column cannot be removed in MariaDB 10.2, but it
can be removed in future releases.
trx_t::has_search_latch: Remove.
trx_assert_no_search_latch(): Remove.
row_sel_try_search_shortcut_for_mysql(): Remove a redundant condition
on trx->has_search_latch (it was always true).
sync_check_iterate(): Make the parameter const.
sync_check_functor_t: Make the operator() const, and remove result()
and the virtual destructor. There is no need to have mutable state
in the functors.
sync_checker<bool>: Replaces dict_sync_check and btrsea_sync_check.
sync_check: Replaces btrsea_sync_check.
dict_sync_check: Instantiated from sync_checker.
sync_allowed_latches: Use std::find() directly on the array.
Remove the std::vector.
TrxInInnoDB::enter(), TrxInInnoDB::exit(): Remove obviously redundant
debug assertions on trx->in_depth, and use equality comparison against 0
because it could be more efficient on some architectures.
When MySQL 5.7 introduced fulltext parser plugins to InnoDB,
it hard-coded the plugin name "ngram" to mean something special.
Because -fsanitize=undefined was issuing warnings for the
assignment in row_merge_create_index() that the value is out of
range for Boolean, we remove this code that was not intended to
be used in MariaDB 10.2.
fts_check_token(): Remove the special logic for N-gram tokens.
This fixes warnings that were emitted when running InnoDB test
suites on a debug server that was compiled with GCC 7.1.0 using
the flags -O3 -fsanitize=undefined.
thd_requested_durability(): XtraDB can call this with trx->mysql_thd=NULL.
Remove the function in InnoDB, because it is not used there.
calc_row_difference(): Do not call memcmp(o_ptr, NULL, 0).
innobase_index_name_is_reserved(): This can be called with
key_info=NULL, num_of_keys=0.
innobase_dropping_foreign(), innobase_check_foreigns_low(),
innobase_check_foreigns(): This can be called with
drop_fk=NULL, n_drop_fk=0.
rec_convert_dtuple_to_rec_comp(): Do not invoke memcpy(end, NULL, 0).
Use uint32_t for the encryption key_id.
When filling unsigned integer values into INFORMATION_SCHEMA tables,
use the method Field::store(longlong, bool unsigned)
instead of using Field::store(double).
Fix also some miscellanous type mismatch related to ulint (size_t).
ha_innobase::check_if_supported_inplace_alter(): For now, reject
ALGORITHM=INPLACE when a non-constant DEFAULT expression is specified
for ADD COLUMN or for changing a NULL column to NOT NULL.
Later, we should evaluate the non-constant column values in these cases.
This only merges MDEV-12253, adapting it to MDEV-12602 which is already
present in 10.2 but not yet in the 10.1 revision that is being merged.
TODO: Error handling in crash recovery needs to be improved.
If a page cannot be decrypted (or read), we should cleanly abort
the startup. If innodb_force_recovery is specified, we should
ignore the problematic page and apply redo log to other pages.
Currently, the test encryption.innodb-redo-badkey randomly fails
like this (the last messages are from cmake -DWITH_ASAN):
2017-05-05 10:19:40 140037071685504 [Note] InnoDB: Starting crash recovery from checkpoint LSN=1635994
2017-05-05 10:19:40 140037071685504 [ERROR] InnoDB: Missing MLOG_FILE_NAME or MLOG_FILE_DELETE before MLOG_CHECKPOINT for tablespace 1
2017-05-05 10:19:40 140037071685504 [ERROR] InnoDB: Plugin initialization aborted at srv0start.cc[2201] with error Data structure corruption
2017-05-05 10:19:41 140037071685504 [Note] InnoDB: Starting shutdown...
i=================================================================
==5226==ERROR: AddressSanitizer: attempting free on address which was not malloc()-ed: 0x612000018588 in thread T0
#0 0x736750 in operator delete(void*) (/mariadb/server/build/sql/mysqld+0x736750)
#1 0x1e4833f in LatchCounter::~LatchCounter() /mariadb/server/storage/innobase/include/sync0types.h:599:4
#2 0x1e480b8 in LatchMeta<LatchCounter>::~LatchMeta() /mariadb/server/storage/innobase/include/sync0types.h:786:17
#3 0x1e35509 in sync_latch_meta_destroy() /mariadb/server/storage/innobase/sync/sync0debug.cc:1622:3
#4 0x1e35314 in sync_check_close() /mariadb/server/storage/innobase/sync/sync0debug.cc:1839:2
#5 0x1dfdc18 in innodb_shutdown() /mariadb/server/storage/innobase/srv/srv0start.cc:2888:2
#6 0x197e5e6 in innobase_init(void*) /mariadb/server/storage/innobase/handler/ha_innodb.cc:4475:3
Problem:
=======
Concurrent update dml statement doesn't reflect in virtual index during
inplace table rebuild. It results mismatch value in virutal index and
clustered index. Deleting the table content tries to search the mismatch
value in virtual index but it can't find the value. During log update
apply phase, virtual information is being ignored while constructing
the new entry.
Solution:
=========
In row_log_update_apply phase, build the entry with virtual column
information. So that it can reflect in newly constructed virtual index.
Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 14974
Analysis:
========
A foreign key constraint cannot reference a secondary index defined
on a generated virtual column. While adding new index/drop existing
column, server internally drops the internal foreign key index and
it leads to choose the virtual secondary index as foreign key index.
But innodb doesn't allow foreign key constraint reference to
secondary virtual index.
Fix:
===
Allow foreign key constraint refer to secondary index defined on
a generated virutal column.
Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 13586
This bug was introduced in MySQL 5.6.8 with WL#6255.
When an error occurs while rebuilding a table that only has a
hidden GEN_CLUST_INDEX inside InnoDB, ha_alter_info->key_info_buffer
would be invalid and should not be dereferenced.
get_error_key_name(): Get the name of an erroneous key.
Avoid dereferencing ha_alter_info->key_info_buffer when no keys
exist in the SQL layer.
ha_innobase::inplace_alter_table(),
ha_innobase::commit_try_rebuild(): Invoke get_error_key_name()
for reporting ER_INNODB_ONLINE_LOG_TOO_BIG or ER_INDEX_CORRUPT.
RB: 13834
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
Problem was that bpage was referenced after it was already freed
from LRU. Fixed by adding a new variable encrypted that is
passed down to buf_page_check_corrupt() and used in
buf_page_get_gen() to stop processing page read.
This patch should also address following test failures and
bugs:
MDEV-12419: IMPORT should not look up tablespace in
PageConverter::validate(). This is now removed.
MDEV-10099: encryption.innodb_onlinealter_encryption fails
sporadically in buildbot
MDEV-11420: encryption.innodb_encryption-page-compression
failed in buildbot
MDEV-11222: encryption.encrypt_and_grep failed in buildbot on P8
Removed dict_table_t::is_encrypted and dict_table_t::ibd_file_missing
and replaced these with dict_table_t::file_unreadable. Table
ibd file is missing if fil_get_space(space_id) returns NULL
and encrypted if not. Removed dict_table_t::is_corrupted field.
Ported FilSpace class from 10.2 and using that on buf_page_check_corrupt(),
buf_page_decrypt_after_read(), buf_page_encrypt_before_write(),
buf_dblwr_process(), buf_read_page(), dict_stats_save_defrag_stats().
Added test cases when enrypted page could be read while doing
redo log crash recovery. Also added test case for row compressed
blobs.
btr_cur_open_at_index_side_func(),
btr_cur_open_at_rnd_pos_func(): Avoid referencing block that is
NULL.
buf_page_get_zip(): Issue error if page read fails.
buf_page_get_gen(): Use dberr_t for error detection and
do not reference bpage after we hare freed it.
buf_mark_space_corrupt(): remove bpage from LRU also when
it is encrypted.
buf_page_check_corrupt(): @return DB_SUCCESS if page has
been read and is not corrupted,
DB_PAGE_CORRUPTED if page based on checksum check is corrupted,
DB_DECRYPTION_FAILED if page post encryption checksum matches but
after decryption normal page checksum does not match. In read
case only DB_SUCCESS is possible.
buf_page_io_complete(): use dberr_t for error handling.
buf_flush_write_block_low(),
buf_read_ahead_random(),
buf_read_page_async(),
buf_read_ahead_linear(),
buf_read_ibuf_merge_pages(),
buf_read_recv_pages(),
fil_aio_wait():
Issue error if page read fails.
btr_pcur_move_to_next_page(): Do not reference page if it is
NULL.
Introduced dict_table_t::is_readable() and dict_index_t::is_readable()
that will return true if tablespace exists and pages read from
tablespace are not corrupted or page decryption failed.
Removed buf_page_t::key_version. After page decryption the
key version is not removed from page frame. For unencrypted
pages, old key_version is removed at buf_page_encrypt_before_write()
dict_stats_update_transient_for_index(),
dict_stats_update_transient()
Do not continue if table decryption failed or table
is corrupted.
dict0stats.cc: Introduced a dict_stats_report_error function
to avoid code duplication.
fil_parse_write_crypt_data():
Check that key read from redo log entry is found from
encryption plugin and if it is not, refuse to start.
PageConverter::validate(): Removed access to fil_space_t as
tablespace is not available during import.
Fixed error code on innodb.innodb test.
Merged test cased innodb-bad-key-change5 and innodb-bad-key-shutdown
to innodb-bad-key-change2. Removed innodb-bad-key-change5 test.
Decreased unnecessary complexity on some long lasting tests.
Removed fil_inc_pending_ops(), fil_decr_pending_ops(),
fil_get_first_space(), fil_get_next_space(),
fil_get_first_space_safe(), fil_get_next_space_safe()
functions.
fil_space_verify_crypt_checksum(): Fixed bug found using ASAN
where FIL_PAGE_END_LSN_OLD_CHECKSUM field was incorrectly
accessed from row compressed tables. Fixed out of page frame
bug for row compressed tables in
fil_space_verify_crypt_checksum() found using ASAN. Incorrect
function was called for compressed table.
Added new tests for discard, rename table and drop (we should allow them
even when page decryption fails). Alter table rename is not allowed.
Added test for restart with innodb-force-recovery=1 when page read on
redo-recovery cant be decrypted. Added test for corrupted table where
both page data and FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION is corrupted.
Adjusted the test case innodb_bug14147491 so that it does not anymore
expect crash. Instead table is just mostly not usable.
fil0fil.h: fil_space_acquire_low is not visible function
and fil_space_acquire and fil_space_acquire_silent are
inline functions. FilSpace class uses fil_space_acquire_low
directly.
recv_apply_hashed_log_recs() does not return anything.
When a table has no PRIMARY KEY, but there is a UNIQUE INDEX
defined on NOT NULL columns that are not column prefixes,
that unique index must be treated as the primary key.
This property was being violated by InnoDB when a column was changed
to NOT NULL, such that a UNIQUE INDEX on that column became eligible
to being treated as a primary key.
innobase_create_key_defs(): Instead of checking each ADD [UNIQUE] INDEX
request, check if a GEN_CLUST_INDEX can be replaced with any unique index
in the altered_table definition. So, we can have new_primary even
if n_add==0.
prepare_inplace_alter_table_dict(): When the table is not being rebuilt,
assert that TABLE_SHARE::primary_key is not changing.
RB: 13595
Reviewed-by: Kevin Lewis <kevin.lewis@oracle.com>
Problem:
=======
Inplace alter algorithm determines the table to be rebuild if the table
undergoes row format change, key block size if handler flag contains only
change table create option. If alter with inplace ignore flag operations and change table create options then it leads to table rebuild operation.
Solution:
========
During the check for rebuild, ignore the inplace ignore flag and check for
table create options.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
Reviewed-by: Marko Makela <marko.makela@oracle.com>
RB: 13172
trx::has_logged_persistent(): Renamed from trx_is_redo_rseg_updated().
Determines if a transaction has generated any persistent undo log.
trx::has_logged(): Renamed from trx_is_rseg_updated().
Determines if a transaction has generated any undo log.
MDEV-11581: Mariadb starts InnoDB encryption threads
when key has not changed or data scrubbing turned off
Background: Key rotation is based on background threads
(innodb-encryption-threads) periodically going through
all tablespaces on fil_system. For each tablespace
current used key version is compared to max key age
(innodb-encryption-rotate-key-age). This process
naturally takes CPU. Similarly, in same time need for
scrubbing is investigated. Currently, key rotation
is fully supported on Amazon AWS key management plugin
only but InnoDB does not have knowledge what key
management plugin is used.
This patch re-purposes innodb-encryption-rotate-key-age=0
to disable key rotation and background data scrubbing.
All new tables are added to special list for key rotation
and key rotation is based on sending a event to
background encryption threads instead of using periodic
checking (i.e. timeout).
fil0fil.cc: Added functions fil_space_acquire_low()
to acquire a tablespace when it could be dropped concurrently.
This function is used from fil_space_acquire() or
fil_space_acquire_silent() that will not print
any messages if we try to acquire space that does not exist.
fil_space_release() to release a acquired tablespace.
fil_space_next() to iterate tablespaces in fil_system
using fil_space_acquire() and fil_space_release().
Similarly, fil_space_keyrotation_next() to iterate new
list fil_system->rotation_list where new tables.
are added if key rotation is disabled.
Removed unnecessary functions fil_get_first_space_safe()
fil_get_next_space_safe()
fil_node_open_file(): After page 0 is read read also
crypt_info if it is not yet read.
btr_scrub_lock_dict_func()
buf_page_check_corrupt()
buf_page_encrypt_before_write()
buf_merge_or_delete_for_page()
lock_print_info_all_transactions()
row_fts_psort_info_init()
row_truncate_table_for_mysql()
row_drop_table_for_mysql()
Use fil_space_acquire()/release() to access fil_space_t.
buf_page_decrypt_after_read():
Use fil_space_get_crypt_data() because at this point
we might not yet have read page 0.
fil0crypt.cc/fil0fil.h: Lot of changes. Pass fil_space_t* directly
to functions needing it and store fil_space_t* to rotation state.
Use fil_space_acquire()/release() when iterating tablespaces
and removed unnecessary is_closing from fil_crypt_t. Use
fil_space_t::is_stopping() to detect when access to
tablespace should be stopped. Removed unnecessary
fil_space_get_crypt_data().
fil_space_create(): Inform key rotation that there could
be something to do if key rotation is disabled and new
table with encryption enabled is created.
Remove unnecessary functions fil_get_first_space_safe()
and fil_get_next_space_safe(). fil_space_acquire()
and fil_space_release() are used instead. Moved
fil_space_get_crypt_data() and fil_space_set_crypt_data()
to fil0crypt.cc.
fsp_header_init(): Acquire fil_space_t*, write crypt_data
and release space.
check_table_options()
Renamed FIL_SPACE_ENCRYPTION_* TO FIL_ENCRYPTION_*
i_s.cc: Added ROTATING_OR_FLUSHING field to
information_schema.innodb_tablespace_encryption
to show current status of key rotation.
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
The InnoDB adaptive hash index is sometimes degrading the performance of
InnoDB, and it is sometimes disabled to get more consistent performance.
We should have a compile-time option to disable the adaptive hash index.
Let us introduce two options:
OPTION(WITH_INNODB_AHI "Include innodb_adaptive_hash_index" ON)
OPTION(WITH_INNODB_ROOT_GUESS "Cache index root block descriptors" ON)
where WITH_INNODB_AHI always implies WITH_INNODB_ROOT_GUESS.
As part of this change, the misleadingly named function
trx_search_latch_release_if_reserved(trx) will be replaced with the macro
trx_assert_no_search_latch(trx) that will be empty unless
BTR_CUR_HASH_ADAPT is defined (cmake -DWITH_INNODB_AHI=ON).
We will also remove the unused column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_TIMEOUT.
In MariaDB Server 10.1, it used to reflect the value of
trx_t::search_latch_timeout which could be adjusted during
row_search_for_mysql(). In 10.2, there is no such field.
Other than the removal of the unused column TRX_ADAPTIVE_HASH_TIMEOUT,
this is an almost non-functional change to the server when using the
default build options.
Some tests are adjusted so that they will work with both
-DWITH_INNODB_AHI=ON and -DWITH_INNODB_AHI=OFF. The test
innodb.innodb_monitor has been renamed to innodb.monitor
in order to track MySQL 5.7, and the duplicate tests
sys_vars.innodb_monitor_* are removed.
move TABLE::key_read into handler. Because in index merge and DS-MRR
there can be many handlers per table, and some of them use
key read while others don't. "keyread" is really per handler,
not per TABLE property.
Oracle introduced a Memcached plugin interface to the InnoDB
storage engine in MySQL 5.6. That interface is essentially a
fork of Memcached development snapshot 1.6.0-beta1 of an old
development branch 'engine-pu'.
To my knowledge, there have not been any updates to the Memcached code
between MySQL 5.6 and 5.7; only bug fixes and extensions related to
the Oracle modifications.
The Memcached plugin is not part of the MariaDB Server. Therefore it
does not make sense to include the InnoDB interfaces for the Memcached
plugin, or to have any related configuration parameters:
innodb_api_bk_commit_interval
innodb_api_disable_rowlock
innodb_api_enable_binlog
innodb_api_enable_mdl
innodb_api_trx_level
Removing this code in one commit makes it possible to easily restore
it, in case it turns out to be needed later.
after failed ADD UNIQUE INDEX
check_col_exists_in_indexes(): Add the parameter only_committed.
When considering committed indexes, evaluate index->is_committed().
Else, evaluate index->to_be_dropped.
rollback_inplace_alter_table(): Invoke check_col_exists_in_indexes()
with only_committed=true.
MySQL 5.7 allows temporary tables to be created in ROW_FORMAT=COMPRESSED.
The usefulness of this is questionable. WL#7899 in MySQL 8.0.0
prevents the creation of such compressed tables, so that all InnoDB
temporary tables will be located inside the predefined
InnoDB temporary tablespace.
Pick up and adjust some tests from MySQL 5.7 and 8.0.
dict_tf_to_fsp_flags(): Remove the parameter is_temp.
fsp_flags_init(): Remove the parameter is_temporary.
row_mysql_drop_temp_tables(): Remove. There cannot be any temporary
tables in InnoDB. (This never removed #sql* tables in the datadir
which were created by DDL.)
dict_table_t::dir_path_of_temp_table: Remove.
create_table_info_t::m_temp_path: Remove.
create_table_info_t::create_options_are_invalid(): Do not allow
ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE for temporary tables.
create_table_info_t::innobase_table_flags(): Do not unnecessarily
prevent CREATE TEMPORARY TABLE with SPATIAL INDEX.
(MySQL 5.7 does allow this.)
fil_space_belongs_in_lru(): The only FIL_TYPE_TEMPORARY tablespace
is never subjected to closing least-recently-used files.
MySQL 5.7 introduced partial support for user-created shared tablespaces
(for example, import and export are not supported).
MariaDB Server does not support tablespaces at this point of time.
Let us remove most InnoDB code and data structures that is related
to shared tablespaces.
The MariaDB 10.1 page_compression is incompatible with the Oracle
implementation that was introduced in MySQL 5.7 later.
Remove the Oracle implementation. Also remove the remaining traces of
MYSQL_ENCRYPTION.
This will also remove traces of PUNCH_HOLE until it is implemented
better. The only effective call to os_file_punch_hole() was in
fil_node_create_low() to test if the operation is supported for the file.
In other words, it looks like page_compression is not working in
MariaDB 10.2, because no code equivalent to the 10.1 os_file_trim()
is enabled.
MariaDB will likely never support MySQL-style encryption for
InnoDB, because we cannot link with the Oracle encryption plugin.
This is preparation for merging MDEV-11623.
When updating a table with virtual BLOB columns, the following might
happen:
- an old record is read from the table, it has no virtual blob values
- update_virtual_fields() is run, vcol blob gets its value into the
record. But only a pointer to the value is in the table->record[0],
the value is in Field_blob::value String (but it doesn't have to be!
it can be in the record, if the column is just a copy of another
columns: ... b VARCHAR, c BLOB AS (b) ...)
- store_record(table,record[1]), old record now is in record[1]
- fill_record() prepares new values in record[0], vcol blob is updated,
new value replaces the old one in the Field_blob::value
- now both record[1] and record[0] have a pointer that points to the
*new* vcol blob value. Or record[1] has a pointer to nowhere if
Field_blob::value had to realloc.
To fix this I have introduced a new String object 'read_value' in
Field_blob. When updating virtual columns when a row has been read,
the allocated value is stored in 'read_value' instead of 'value'. The
allocated blobs for the new row is stored in 'value' as before.
I also made, as a safety precaution, the insert delayed handling of
blobs more general by using value to store strings instead of the
record. This ensures that virtual functions on delayed insert should
work in as in the case of normal insert.
Triggers are now properly updating the read, write and vcol maps for used
fields. This means that we don't need VCOL_UPDATE_FOR_READ_WRITE anymore
and there is no need for any other special handling of triggers in
update_virtual_fields().
To be able to test how many times virtual fields are invoked, I also
relaxed rules that one can use local (@) variables in DEFAULT and non
persistent virtual field expressions.
- Atomic writes are enabled by default
- Automatically detect if device supports atomic write and use it if
atomic writes are enabled
- Remove ATOMIC WRITE options from CREATE TABLE
- Atomic write is a device option, not a table options as the table may
crash if the media changes
- Add support for SHANNON SSD cards
Memory was leaked when ALTER TABLE is attempted on a table
that contains corrupted indexes.
The memory leak was reported by AddressSanitizer for the test
innodb.innodb_corrupt_bit. The leak was introduced into
MariaDB Server 10.0.26, 10.1.15, 10.2.1 by the following:
commit c081c978a2
Merge: 1d21b22155a482e76e65
Author: Sergei Golubchik <serg@mariadb.org>
Date: Tue Jun 21 14:11:02 2016 +0200
Merge branch '5.5' into bb-10.0
This should be functionally equivalent to WL#6204 in MySQL 8.0.0, with
the notable difference that the file format changes are limited to
repurposing a previously unused data field in B-tree pages.
For persistent InnoDB tables, write the last used AUTO_INCREMENT
value to the root page of the clustered index, in the previously
unused (0) PAGE_MAX_TRX_ID field, now aliased as PAGE_ROOT_AUTO_INC.
Unlike some other previously unused InnoDB data fields, this one was
actually always zero-initialized, at least since MySQL 3.23.49.
The writes to PAGE_ROOT_AUTO_INC are protected by SX or X latch on the
root page. The SX latch will allow concurrent read access to the root
page. (The field PAGE_ROOT_AUTO_INC will only be read on the
first-time call to ha_innobase::open() from the SQL layer. The
PAGE_ROOT_AUTO_INC can only be updated when executing SQL, so
read/write races are not possible.)
During INSERT, the PAGE_ROOT_AUTO_INC is updated by the low-level
function btr_cur_search_to_nth_level(), adding no extra page
access. [Adaptive hash index lookup will be disabled during INSERT.]
If some rare UPDATE modifies an AUTO_INCREMENT column, the
PAGE_ROOT_AUTO_INC will be adjusted in a separate mini-transaction in
ha_innobase::update_row().
When a page is reorganized, we have to preserve the PAGE_ROOT_AUTO_INC
field.
During ALTER TABLE, the initial AUTO_INCREMENT value will be copied
from the table. ALGORITHM=COPY and online log apply in LOCK=NONE will
update PAGE_ROOT_AUTO_INC in real time.
innodb_col_no(): Determine the dict_table_t::cols[] element index
corresponding to a Field of a non-virtual column.
(The MySQL 5.7 implementation of virtual columns breaks the 1:1
relationship between Field::field_index and dict_table_t::cols[].
Virtual columns are omitted from dict_table_t::cols[]. Therefore,
we must translate the field_index of AUTO_INCREMENT columns into
an index of dict_table_t::cols[].)
Upgrade from old data files:
By default, the AUTO_INCREMENT sequence in old data files would appear
to be reset, because PAGE_MAX_TRX_ID or PAGE_ROOT_AUTO_INC would contain
the value 0 in each clustered index page. In new data files,
PAGE_ROOT_AUTO_INC can only be 0 if the table is empty or does not contain
any AUTO_INCREMENT column.
For backward compatibility, we use the old method of
SELECT MAX(auto_increment_column) for initializing the sequence.
btr_read_autoinc(): Read the AUTO_INCREMENT sequence from a new-format
data file.
btr_read_autoinc_with_fallback(): A variant of btr_read_autoinc()
that will resort to reading MAX(auto_increment_column) for data files
that did not use AUTO_INCREMENT yet. It was manually tested that during
the execution of innodb.autoinc_persist the compatibility logic is
not activated (for new files, PAGE_ROOT_AUTO_INC is never 0 in nonempty
clustered index root pages).
initialize_auto_increment(): Replaces
ha_innobase::innobase_initialize_autoinc(). This initializes
the AUTO_INCREMENT metadata. Only called from ha_innobase::open().
ha_innobase::info_low(): Do not try to lazily initialize
dict_table_t::autoinc. It must already have been initialized by
ha_innobase::open() or ha_innobase::create().
Note: The adjustments to class ha_innopart were not tested, because
the source code (native InnoDB partitioning) is not being compiled.
* remove old 5.2+ InnoDB support for virtual columns
* enable corresponding parts of the innodb-5.7 sources
* copy corresponding test cases from 5.7
* copy detailed Alter_inplace_info::HA_ALTER_FLAGS flags from 5.7
- and more detailed detection of changes in fill_alter_inplace_info()
* more "innodb compatibility hooks" in sql_class.cc to
- create/destroy/reset a THD (used by background purge threads)
- find a prelocked table by name
- open a table (from a background purge thread)
* different from 5.7:
- new service thread "thd_destructor_proxy" to make sure all THDs are
destroyed at the correct point in time during the server shutdown
- proper opening/closing of tables for vcol evaluations in
+ FK checks (use already opened prelocked tables)
+ purge threads (open the table, MDLock it, add it to tdc, close
when not needed)
- cache open tables in vc_templ
- avoid unnecessary allocations, reuse table->record[0] and table->s->default_values
- not needed in 5.7, because it overcalculates:
+ tell the server to calculate vcols for an on-going inline ADD INDEX
+ calculate vcols for correct error messages
* update other engines (mroonga/tokudb) accordingly
* remnant of 5.6, does not exist in 5.7. bad merge?
* also remove dict_table_get_col_name_for_mysql(), it was only
used when index_field_t::col_name was not NULL
