Remove the SHARED_SPACE flag that was erroneously introduced in
MariaDB 10.2.2, and shift the SYS_TABLES.TYPE flags back to where
they were before MariaDB 10.2.2. While doing this, ensure that
tables created with affected MariaDB versions can be loaded,
and also ensure that tables created with MySQL 5.7 using the
TABLESPACE attribute cannot be loaded.
MariaDB 10.2.2 picked the SHARED_SPACE flag from MySQL 5.7,
shifting the MariaDB 10.1 flags PAGE_COMPRESSION, PAGE_COMPRESSION_LEVEL,
ATOMIC_WRITES by one bit. The SHARED_SPACE flag would always
be written as 0 by MariaDB, because MariaDB does not support
CREATE TABLESPACE or CREATE TABLE...TABLESPACE for InnoDB.
So, instead of the bits AALLLLCxxxxxxx we would have
AALLLLC0xxxxxxx if the table was created with MariaDB 10.2.2
to 10.2.6. (AA=ATOMIC_WRITES, LLLL=PAGE_COMPRESSION_LEVEL,
C=PAGE_COMPRESSED, xxxxxxx=7 bits that were not moved.)
PAGE_COMPRESSED=NO implies LLLLC=00000. That is not a problem.
If someone created a table in MariaDB 10.2.2 or 10.2.3 with
the attribute ATOMIC_WRITES=OFF (value 2; AA=10) and without
PAGE_COMPRESSED=YES or PAGE_COMPRESSION_LEVEL, the table should be
rejected. We ignore this problem, because it should be unlikely
for anyone to specify ATOMIC_WRITES=OFF, and because 10.2.2 and
10.2.2 were not mature releases. The value ATOMIC_WRITES=ON (1)
would be interpreted as ATOMIC_WRITES=OFF, but starting with
MariaDB 10.2.4 the ATOMIC_WRITES attribute is ignored.
PAGE_COMPRESSED=YES implies that PAGE_COMPRESSION_LEVEL be between
1 and 9 and that ROW_FORMAT be COMPACT or DYNAMIC. Thus, the affected
wrong bit pattern in SYS_TABLES.TYPE is of the form AALLLL10DB00001
where D signals the presence of a DATA DIRECTORY attribute and B is 1
for ROW_FORMAT=DYNAMIC and 0 for ROW_FORMAT=COMPACT. We must interpret
this bit pattern as AALLLL1DB00001 (discarding the extraneous 0 bit).
dict_sys_tables_rec_read(): Adjust the affected bit pattern when
reading the SYS_TABLES.TYPE column. In case of invalid flags,
report both SYS_TABLES.TYPE (after possible adjustment) and
SYS_TABLES.MIX_LEN.
dict_load_table_one(): Replace an unreachable condition on
!dict_tf2_is_valid() with a debug assertion. The flags will already
have been validated by dict_sys_tables_rec_read(); if that validation
fails, dict_load_table_low() will have failed.
fil_ibd_create(): Shorten an error message about a file pre-existing.
Datafile::validate_to_dd(): Clarify an error message about tablespace
flags mismatch.
ha_innobase::open(): Remove an unnecessary warning message.
dict_tf_is_valid(): Simplify and stricten the logic. Validate the
values of PAGE_COMPRESSION. Remove error log output; let the callers
handle that.
DICT_TF_BITS: Remove ATOMIC_WRITES, PAGE_ENCRYPTION, PAGE_ENCRYPTION_KEY.
The ATOMIC_WRITES is ignored once the SYS_TABLES.TYPE has been validated;
there is no need to store it in dict_table_t::flags. The PAGE_ENCRYPTION
and PAGE_ENCRYPTION_KEY are unused since MariaDB 10.1.4 (the GA release
was 10.1.8).
DICT_TF_BIT_MASK: Remove (unused).
FSP_FLAGS_MEM_ATOMIC_WRITES: Remove (the flags are never read).
row_import_read_v1(): Display an error if dict_tf_is_valid() fails.
Problem appears to be that the function fsp_flags_try_adjust()
is being unconditionally invoked on every .ibd file on startup.
Based on performance investigation also the top function
fsp_header_get_crypt_offset() needs to addressed.
Ported implementation of fsp_header_get_encryption_offset()
function from 10.2 to fsp_header_get_crypt_offset().
Introduced a new function fil_crypt_read_crypt_data()
to read page 0 if it is not yet read.
fil_crypt_find_space_to_rotate(): Now that page 0 for every .ibd
file is not read on startup we need to check has page 0 read
from space that we investigate for key rotation, if it is not read
we read it.
fil_space_crypt_get_status(): Now that page 0 for every .ibd
file is not read on startup here also we need to read page 0
if it is not yet read it. This is needed
as tests use IS query to wait until background encryption
or decryption has finished and this function is used to
produce results.
fil_crypt_thread(): Add is_stopping condition for tablespace
so that we do not rotate pages if usage of tablespace should
be stopped. This was needed for failure seen on regression
testing.
fil_space_create: Remove page_0_crypt_read and extra
unnecessary info output.
fil_open_single_table_tablespace(): We call fsp_flags_try_adjust
only when when no errors has happened and server was not started
on read only mode and tablespace validation was requested or
flags contain other table options except low order bits to
FSP_FLAGS_POS_PAGE_SSIZE position.
fil_space_t::page_0_crypt_read removed.
Added test case innodb-first-page-read to test startup when
encryption is on and when encryption is off to check that not
for all tables page 0 is read on startup.
The doublewrite buffer pages must fit in the first InnoDB system
tablespace data file. The checks that were added in the initial patch
(commit 112b21da37)
were at too high level and did not cover all cases.
innodb.log_data_file_size: Test all innodb_page_size combinations.
fsp_header_init(): Never return an error. Move the change buffer creation
to the only caller that needs to do it.
btr_create(): Clean up the logic. Remove the error log messages.
buf_dblwr_create(): Try to return an error on non-fatal failure.
Check that the first data file is big enough for creating the
doublewrite buffers.
buf_dblwr_process(): Check if the doublewrite buffer is available.
Display the message only if it is available.
recv_recovery_from_checkpoint_start_func(): Remove a redundant message
about FIL_PAGE_FILE_FLUSH_LSN mismatch when crash recovery has already
been initiated.
fil_report_invalid_page_access(): Simplify the message.
fseg_create_general(): Do not emit messages to the error log.
innobase_init(): Revert the changes.
trx_rseg_create(): Refactor (no functional change).
Problem was that all doublewrite buffer pages must fit to first
system datafile.
Ported commit 27a34df7882b1f8ed283f22bf83e8bfc523cbfde
Author: Shaohua Wang <shaohua.wang@oracle.com>
Date: Wed Aug 12 15:55:19 2015 +0800
BUG#21551464 - SEGFAULT WHILE INITIALIZING DATABASE WHEN
INNODB_DATA_FILE SIZE IS SMALL
To 10.1 (with extended error printout).
btr_create(): If ibuf header page allocation fails report error and
return FIL_NULL. Similarly if root page allocation fails return a error.
dict_build_table_def_step: If fsp_header_init fails return
error code.
fsp_header_init: returns true if header initialization succeeds
and false if not.
fseg_create_general: report error if segment or page allocation fails.
innobase_init: If first datafile is smaller than 3M and could not
contain all doublewrite buffer pages report error and fail to
initialize InnoDB plugin.
row_truncate_table_for_mysql: report error if fsp header init
fails.
srv_init_abort: New function to report database initialization errors.
srv_undo_tablespaces_init, innobase_start_or_create_for_mysql: If
database initialization fails report error and abort.
trx_rseg_create: If segment header creation fails return.
InnoDB defines some functions that are not called at all.
Other functions are called, but only from the same compilation unit.
Remove some function declarations and definitions, and add 'static'
keywords. Some symbols must be kept for separately compiled tools,
such as innochecksum.
Also, remove empty .ic files that were not removed by my MySQL commit.
Problem:
InnoDB used to support a compilation mode that allowed to choose
whether the function definitions in .ic files are to be inlined or not.
This stopped making sense when InnoDB moved to C++ in MySQL 5.6
(and ha_innodb.cc started to #include .ic files), and more so in
MySQL 5.7 when inline methods and functions were introduced
in .h files.
Solution:
Remove all references to UNIV_NONINL and UNIV_MUST_NOT_INLINE from
all files, assuming that the symbols are never defined.
Remove the files fut0fut.cc and ut0byte.cc which only mattered when
UNIV_NONINL was defined.
MDEV-11581: Mariadb starts InnoDB encryption threads
when key has not changed or data scrubbing turned off
Background: Key rotation is based on background threads
(innodb-encryption-threads) periodically going through
all tablespaces on fil_system. For each tablespace
current used key version is compared to max key age
(innodb-encryption-rotate-key-age). This process
naturally takes CPU. Similarly, in same time need for
scrubbing is investigated. Currently, key rotation
is fully supported on Amazon AWS key management plugin
only but InnoDB does not have knowledge what key
management plugin is used.
This patch re-purposes innodb-encryption-rotate-key-age=0
to disable key rotation and background data scrubbing.
All new tables are added to special list for key rotation
and key rotation is based on sending a event to
background encryption threads instead of using periodic
checking (i.e. timeout).
fil0fil.cc: Added functions fil_space_acquire_low()
to acquire a tablespace when it could be dropped concurrently.
This function is used from fil_space_acquire() or
fil_space_acquire_silent() that will not print
any messages if we try to acquire space that does not exist.
fil_space_release() to release a acquired tablespace.
fil_space_next() to iterate tablespaces in fil_system
using fil_space_acquire() and fil_space_release().
Similarly, fil_space_keyrotation_next() to iterate new
list fil_system->rotation_list where new tables.
are added if key rotation is disabled.
Removed unnecessary functions fil_get_first_space_safe()
fil_get_next_space_safe()
fil_node_open_file(): After page 0 is read read also
crypt_info if it is not yet read.
btr_scrub_lock_dict_func()
buf_page_check_corrupt()
buf_page_encrypt_before_write()
buf_merge_or_delete_for_page()
lock_print_info_all_transactions()
row_fts_psort_info_init()
row_truncate_table_for_mysql()
row_drop_table_for_mysql()
Use fil_space_acquire()/release() to access fil_space_t.
buf_page_decrypt_after_read():
Use fil_space_get_crypt_data() because at this point
we might not yet have read page 0.
fil0crypt.cc/fil0fil.h: Lot of changes. Pass fil_space_t* directly
to functions needing it and store fil_space_t* to rotation state.
Use fil_space_acquire()/release() when iterating tablespaces
and removed unnecessary is_closing from fil_crypt_t. Use
fil_space_t::is_stopping() to detect when access to
tablespace should be stopped. Removed unnecessary
fil_space_get_crypt_data().
fil_space_create(): Inform key rotation that there could
be something to do if key rotation is disabled and new
table with encryption enabled is created.
Remove unnecessary functions fil_get_first_space_safe()
and fil_get_next_space_safe(). fil_space_acquire()
and fil_space_release() are used instead. Moved
fil_space_get_crypt_data() and fil_space_set_crypt_data()
to fil0crypt.cc.
fsp_header_init(): Acquire fil_space_t*, write crypt_data
and release space.
check_table_options()
Renamed FIL_SPACE_ENCRYPTION_* TO FIL_ENCRYPTION_*
i_s.cc: Added ROTATING_OR_FLUSHING field to
information_schema.innodb_tablespace_encryption
to show current status of key rotation.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
The InnoDB adaptive hash index is sometimes degrading the performance of
InnoDB, and it is sometimes disabled to get more consistent performance.
We should have a compile-time option to disable the adaptive hash index.
Let us introduce two options:
OPTION(WITH_INNODB_AHI "Include innodb_adaptive_hash_index" ON)
OPTION(WITH_INNODB_ROOT_GUESS "Cache index root block descriptors" ON)
where WITH_INNODB_AHI always implies WITH_INNODB_ROOT_GUESS.
As part of this change, the misleadingly named function
trx_search_latch_release_if_reserved(trx) will be replaced with the macro
trx_assert_no_search_latch(trx) that will be empty unless
BTR_CUR_HASH_ADAPT is defined (cmake -DWITH_INNODB_AHI=ON).
We will also remove the unused column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_TIMEOUT.
In MariaDB Server 10.1, it used to reflect the value of
trx_t::search_latch_timeout which could be adjusted during
row_search_for_mysql(). In 10.2, there is no such field.
Other than the removal of the unused column TRX_ADAPTIVE_HASH_TIMEOUT,
this is an almost non-functional change to the server when using the
default build options.
Some tests are adjusted so that they will work with both
-DWITH_INNODB_AHI=ON and -DWITH_INNODB_AHI=OFF. The test
innodb.innodb_monitor has been renamed to innodb.monitor
in order to track MySQL 5.7, and the duplicate tests
sys_vars.innodb_monitor_* are removed.
Datafile::validate_for_recovery(): Remove a redundant error message.
An error is already reported by Datafile::open_read_write() if the
file cannot be opened.
Also, do not assign SEARCH_ABORT, so that the full test will be executed
even if one step fails.
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
This is the final preparation for the merge of MDEV-11623
from MariaDB Server 10.1 (correcting the assignment of
FSP_SPACE_FLAGS in MariaDB Server 10.1).
We must avoid reading FSP_SPACE_FLAGS directly from page 0,
because the flags that affect the uncompressed page size
cannot be trusted if we are upgrading from MariaDB 10.1.
We will pass fil_space_t* instead of a numeric tablespace ID
in many low-level functions, so that fil_space_t::flags
will be available. This will also reduce the amount o
tablespace ID lookups and the pressure on fil_system->mutex.
fil_space_is_being_truncated(), fil_space_is_redo_skipped(),
PageCallback::set_page_size(), fsp_header_get_page_size(): Remove.
fil_node_open_file(), fil_space_get_crypt_data(): Use space->flags.
fsp_free_extent(), fseg_get_first_extent(), fsp_get_space_header(),
xdes_get_descriptor_with_space_hdr(), xdes_get_descriptor(),
xdes_lst_get_descriptor(), fsp_space_modify_check(),
fsp_init_file_page(), fsp_alloc_free_extent(), fsp_page_create(),
fsp_alloc_free_page(), fsp_free_page(), fsp_alloc_seg_inode_page(),
fsp_alloc_seg_inode(), fsp_free_seg_inode(), fseg_fill_free_list(),
fseg_mark_page_used(), fseg_free_page_low(), fseg_free_extent():
Take fil_space_t* as a parameter, instead of taking a numeric ID.
MySQL 5.7 allows temporary tables to be created in ROW_FORMAT=COMPRESSED.
The usefulness of this is questionable. WL#7899 in MySQL 8.0.0
prevents the creation of such compressed tables, so that all InnoDB
temporary tables will be located inside the predefined
InnoDB temporary tablespace.
Pick up and adjust some tests from MySQL 5.7 and 8.0.
dict_tf_to_fsp_flags(): Remove the parameter is_temp.
fsp_flags_init(): Remove the parameter is_temporary.
row_mysql_drop_temp_tables(): Remove. There cannot be any temporary
tables in InnoDB. (This never removed #sql* tables in the datadir
which were created by DDL.)
dict_table_t::dir_path_of_temp_table: Remove.
create_table_info_t::m_temp_path: Remove.
create_table_info_t::create_options_are_invalid(): Do not allow
ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE for temporary tables.
create_table_info_t::innobase_table_flags(): Do not unnecessarily
prevent CREATE TEMPORARY TABLE with SPATIAL INDEX.
(MySQL 5.7 does allow this.)
fil_space_belongs_in_lru(): The only FIL_TYPE_TEMPORARY tablespace
is never subjected to closing least-recently-used files.
MySQL 5.7 introduced partial support for user-created shared tablespaces
(for example, import and export are not supported).
MariaDB Server does not support tablespaces at this point of time.
Let us remove most InnoDB code and data structures that is related
to shared tablespaces.
The MariaDB 10.1 page_compression is incompatible with the Oracle
implementation that was introduced in MySQL 5.7 later.
Remove the Oracle implementation. Also remove the remaining traces of
MYSQL_ENCRYPTION.
This will also remove traces of PUNCH_HOLE until it is implemented
better. The only effective call to os_file_punch_hole() was in
fil_node_create_low() to test if the operation is supported for the file.
In other words, it looks like page_compression is not working in
MariaDB 10.2, because no code equivalent to the 10.1 os_file_trim()
is enabled.
MariaDB will likely never support MySQL-style encryption for
InnoDB, because we cannot link with the Oracle encryption plugin.
This is preparation for merging MDEV-11623.
MariaDB 10.0/MySQL 5.6 using innodb-page-size!=16K
The storage format of FSP_SPACE_FLAGS was accidentally broken
already in MariaDB 10.1.0. This fix is bringing the format in
line with other MySQL and MariaDB release series.
Please refer to the comments that were added to fsp0fsp.h
for details.
This is an INCOMPATIBLE CHANGE that affects users of
page_compression and non-default innodb_page_size. Upgrading
to this release will correct the flags in the data files.
If you want to downgrade to earlier MariaDB 10.1.x, please refer
to the test innodb.101_compatibility how to reset the
FSP_SPACE_FLAGS in the files.
NOTE: MariaDB 10.1.0 to 10.1.20 can misinterpret
uncompressed data files with innodb_page_size=4k or 64k as
compressed innodb_page_size=16k files, and then probably fail
when trying to access the pages. See the comments in the
function fsp_flags_convert_from_101() for detailed analysis.
Move PAGE_COMPRESSION to FSP_SPACE_FLAGS bit position 16.
In this way, compressed innodb_page_size=16k tablespaces will not
be mistaken for uncompressed ones by MariaDB 10.1.0 to 10.1.20.
Derive PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR from the
dict_table_t::flags when the table is available, in
fil_space_for_table_exists_in_mem() or fil_open_single_table_tablespace().
During crash recovery, fil_load_single_table_tablespace() will use
innodb_compression_level for the PAGE_COMPRESSION_LEVEL.
FSP_FLAGS_MEM_MASK: A bitmap of the memory-only fil_space_t::flags
that are not to be written to FSP_SPACE_FLAGS. Currently, these will
include PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR.
Introduce the macro FSP_FLAGS_PAGE_SSIZE(). We only support
one innodb_page_size for the whole instance.
When creating a dummy tablespace for the redo log, use
fil_space_t::flags=0. The flags are never written to the redo log files.
Remove many FSP_FLAGS_SET_ macros.
dict_tf_verify_flags(): Remove. This is basically only duplicating
the logic of dict_tf_to_fsp_flags(), used in a debug assertion.
fil_space_t::mark: Remove. This flag was not used for anything.
fil_space_for_table_exists_in_mem(): Remove the unnecessary parameter
mark_space, and add a parameter for table flags. Check that
fil_space_t::flags match the table flags, and adjust the (memory-only)
flags based on the table flags.
fil_node_open_file(): Remove some redundant or unreachable conditions,
do not use stderr for output, and avoid unnecessary server aborts.
fil_user_tablespace_restore_page(): Convert the flags, so that the
correct page_size will be used when restoring a page from the
doublewrite buffer.
fil_space_get_page_compressed(), fsp_flags_is_page_compressed(): Remove.
It suffices to have fil_space_is_page_compressed().
FSP_FLAGS_WIDTH_DATA_DIR, FSP_FLAGS_WIDTH_PAGE_COMPRESSION_LEVEL,
FSP_FLAGS_WIDTH_ATOMIC_WRITES: Remove, because these flags do not
exist in the FSP_SPACE_FLAGS but only in memory.
fsp_flags_try_adjust(): New function, to adjust the FSP_SPACE_FLAGS
in page 0. Called by fil_open_single_table_tablespace(),
fil_space_for_table_exists_in_mem(), innobase_start_or_create_for_mysql()
except if --innodb-read-only is active.
fsp_flags_is_valid(ulint): Reimplement from the scratch, with
accurate comments. Do not display any details of detected
inconsistencies, because the output could be confusing when
dealing with MariaDB 10.1.x data files.
fsp_flags_convert_from_101(ulint): Convert flags from buggy
MariaDB 10.1.x format, or return ULINT_UNDEFINED if the flags
cannot be in MariaDB 10.1.x format.
fsp_flags_match(): Check the flags when probing files.
Implemented based on fsp_flags_is_valid()
and fsp_flags_convert_from_101().
dict_check_tablespaces_and_store_max_id(): Do not access the
page after committing the mini-transaction.
IMPORT TABLESPACE fixes:
AbstractCallback::init(): Convert the flags.
FetchIndexRootPages::operator(): Check that the tablespace flags match the
table flags. Do not attempt to convert tablespace flags to table flags,
because the conversion would necessarily be lossy.
PageConverter::update_header(): Write back the correct flags.
This takes care of the flags in IMPORT TABLESPACE.
- Atomic writes are enabled by default
- Automatically detect if device supports atomic write and use it if
atomic writes are enabled
- Remove ATOMIC WRITE options from CREATE TABLE
- Atomic write is a device option, not a table options as the table may
crash if the media changes
- Add support for SHANNON SSD cards
MariaDB Server is unnecessarily evaluating the arguments of
DBUG_PRINT() macros when the label is not defined.
The macro DBUG_LOG() for C++ operator<< output which was added for
InnoDB diagnostics in MySQL 5.7 is missing from MariaDB. Unlike the
MySQL 5.7 implementation, MariaDB will avoid allocating and
initializing the output string when the label is not defined.
Introduce DBUG_OUT("crypt") and DBUG_OUT("checksum") for some InnoDB
diagnostics, replacing some use of ib::info().
The InnoDB source code contains quite a few references to a closed-source
hot backup tool which was originally called InnoDB Hot Backup (ibbackup)
and later incorporated in MySQL Enterprise Backup.
The open source backup tool XtraBackup uses the full database for recovery.
So, the references to UNIV_HOTBACKUP are only cluttering the source code.
fil_space_crypt_cleanup(): Call mutex_free() to pair with
fil_space_crypt_init().
fil_space_destroy_crypt_data(): Call mutex_free() to pair with
fil_space_create_crypt_data() and fil_space_read_crypt_data().
fil_crypt_threads_cleanup(): Call mutex_free() to pair with
fil_crypt_threads_init().
fil_space_free_low(): Invoke fil_space_destroy_crypt_data().
fil_close(): Invoke fil_space_crypt_cleanup(), just like
fil_init() invoked fil_space_crypt_init().
Datafile::shutdown(): Set m_crypt_info=NULL without dereferencing
the pointer. The object will be freed along with the fil_space_t
in fil_space_free_low().
Remove some unnecessary conditions (ut_free(NULL) is OK).
srv_shutdown_all_bg_threads(): Shut down the encryption threads
by calling fil_crypt_threads_end().
srv_shutdown_bg_undo_sources(): Do not prematurely call
fil_crypt_threads_end(). Many pages can still be written by
change buffer merge, rollback of incomplete transactions, and
purge, especially in slow shutdown (innodb_fast_shutdown=0).
innobase_shutdown_for_mysql(): Call fil_crypt_threads_cleanup()
also when innodb_read_only=1, because the threads will have been
created also in that case.
sync_check_close(): Re-enable the invocation of sync_latch_meta_destroy()
to free the mutex list.
MySQL 5.7 supports only one shared temporary tablespace.
MariaDB 10.2 does not support any other shared InnoDB tablespaces than
the two predefined tablespaces: the persistent InnoDB system tablespace
(default file name ibdata1) and the temporary tablespace
(default file name ibtmp1).
InnoDB is unnecessarily allocating a tablespace ID for the predefined
temporary tablespace on every startup, and it is in several places
testing whether a tablespace ID matches this dynamically generated ID.
We should use a compile-time constant to reduce code size and to avoid
unnecessary updates to the DICT_HDR page at every startup.
Using a hard-coded tablespace ID will should make it easier to remove the
TEMPORARY flag from FSP_SPACE_FLAGS in MDEV-11202.
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
- Added some extra command to rpl_start_stop to ensure that the
IO thread has connected to the master before we shut down the server.
- if signal returns signalhandler_t, use this with the alarm code
- Added missing tests to sys_vars
- Fixed some possible overflow bugs in tabxml.cpp
