This commits adds the "materialization" block to the output of
EXPLAIN/ANALYZE FORMAT=JSON when materialized subqueries are involved
into processing. In the case of ANALYZE additional runtime information
is displayed, such as:
- chosen strategy of materialization
- number of partial match/index lookup loops
- sizes of partial match buffers
The symptoms were: take a server with no activity and a table that's
not in the buffer pool. Run a query that reads the whole table and
observe that r_engine_stats.pages_read_count shows about 2% of the table
was read. Who reads the rest?
The cause was that page prefetching done inside InnoDB was not counted.
This counts page prefetch requests made in buf_read_ahead_random() and
buf_read_ahead_linear() and makes them visible in:
- ANALYZE: r_engine_stats.pages_prefetch_read_count
- Slow Query Log: Pages_prefetched:
This patch intentionally doesn't attempt to count the time to read the
prefetched pages:
* there's no obvious place where one can do it
* prefetch reads may be done in parallel (right?), it is not clear how
to count the time in this case.
- Change the comments in class ha_handler_stats to say the members
are in ticks, not milliseconds.
- In sql_explain.cc, adjust the scale to print milliseconds.
Part#2, variant 2: Make the printed r_ values in JSON output consistent.
After this patch, ANALYZE output has:
- r_index_rows (NEW) - Observed number of rows before ICP or Rowid Filtering
checks. This is a per-scan average. like r_rows and "rows" are.
- r_rows (AS BEFORE) - Observed number of rows after ICP and Rowid Filtering.
- r_icp_filtered (NEW) - Observed selectivity of ICP condition.
- (AS BEFORE) observed selectivity of Rowid Filter is in
$.rowid_filter.r_selectivity_pct
- r_total_filtered - Observed combined selectivity: fraction of rows left
after applying ICP condition, Rowid Filter, and attached_condition.
This is now comparable with "filtered" and is printed right after it.
- r_filtered (AS BEFORE) - Observed selectivity of "attached_condition".
Tabular ANALYZE output is not changed. Note that JSON's r_filtered and
r_rows have the same meanings as before and have the same meaning as in
tabular output.
(Based on the original patch by Jason Cu)
Part #1:
- Add ha_handler_stats::{icp_attempts,icp_match}, make
handler_index_cond_check() increment them.
- ANALYZE FORMAT=JSON now prints r_icp_filtered based on these counters.
Before this patch, the code in Item_field::print() used
this convention (described in sql_explain.h:ExplainDataStructureLifetime):
- By default, the table that Item_field refers to is accessible.
- ANALYZE and SHOW {EXPLAIN|ANALYZE} may print Items after some
temporary tables have been dropped. They use
QT_DONT_ACCESS_TMP_TABLES flag. When it is ON, Item_field::print
will not access the table it refers to, if it is a temp.table
The bug was that EXPLAIN statement also may compute subqueries (depending
on subquery context and @@expensive_subquery_limit setting). After the
computation, the subquery calls JOIN::cleanup(true) which drops some of
its temporary tables. Calling Item_field::print() that refer to such table
will cause an access to free'd memory.
In this patch, we take into account that query optimization can compute
a subquery and discard its temporary tables. Item_field::print() now
assumes that any temporary table might have already been dropped.
This means QT_DONT_ACCESS_TMP_TABLES flag is not needed - we imply it is
always present.
But we also make one exception: derived tables are not freed in
JOIN::cleanup() call. They are freed later in close_thread_tables(),
at the same time when regular tables are closed.
Because of that, Item_field::print may assume that temp.tables
representing derived tables are available.
Initial patch by: Rex Jonston
Reviewed by: Monty <monty@mariadb.org>
ANALYZE FORMAT=JSON output now includes table.r_engine_stats which
has the engine statistics. Only non-zero members are printed.
Internally: EXPLAIN data structures Explain_table_acccess and
Explain_update now have handler* handler_for_stats pointer.
It is used to read statistics from handler_for_stats->handler_stats.
The following applies only to 10.9+, backport doesn't use it:
Explain data structures exist after the tables are closed. We avoid
walking invalid pointers using this:
- SQL layer calls Explain_query::notify_tables_are_closed() before
closing tables.
- After that call, printing of JSON output is disabled. Non-JSON output
can be printed but we don't access handler_for_stats when doing that.
Allow queries of multiple SELECTs combined together with
UNIONs/EXCEPTs/INTERSECTs to be pushed down to foreign engines.
If the foreign engine provides an interface method "create_unit"
and the UNIT is a top-level unit of the SQL query then the server
tries to push the whole SELECT_LEX_UNIT down to the engine for execution.
The engine should perform necessary checks and if they succeed,
execute the query. If the engine is unable to execute the whole unit,
then another attempt is made to push down SELECTs composing the unit
separately using the "create_select" interface method. In this case
the results of separate SELECTs are combined at the server side
thus composing the final result
After MDEV-30830 has added block-nl-join.r_unpack_time_ms, it became
apparent that there is some unaccounted-for time in BNL join operation,
namely the time that is spent after unpacking the join buffer record.
Fix this by adding a Gap_time_tracker to track the time that is spent
after unpacking the join buffer record and before any next time tracking.
The collected time is printed in block-nl-join.r_other_time_ms.
Reviewed by: Monty <monty@mariadb.org>
In block-nl-join, add:
- r_loops - this shows how many incoming record combinations this
query plan node had.
- r_effective_rows - this shows the average number of matching rows
that this table had for each incoming record combination. This is
comparable with r_rows in non-blocked access methods.
For BNL-joins, it is always equal to
$.table.r_rows * $.table.r_filtered
For BNL-H joins the value cannot be computed from other values
Reviewed by: Monty <monty@mariadb.org>
EXPLAIN EXTENDED for an UPDATE/DELETE/INSERT/REPLACE statement did not
produce the warning containing the text representation of the query
obtained after the optimization phase. Such warning was produced for
SELECT statements, but not for DML statements.
The patch fixes this defect of EXPLAIN EXTENDED for DML statements.
This makes it easier to compare different costs and also allows
the optimizer to optimizer different storage engines more reliably.
- Added tests/check_costs.pl, a tool to verify optimizer cost calculations.
- Most engine costs has been found with this program. All steps to
calculate the new costs are documented in Docs/optimizer_costs.txt
- User optimizer_cost variables are given in microseconds (as individual
costs can be very small). Internally they are stored in ms.
- Changed DISK_READ_COST (was DISK_SEEK_BASE_COST) from a hard disk cost
(9 ms) to common SSD cost (400MB/sec).
- Removed cost calculations for hard disks (rotation etc).
- Changed the following handler functions to return IO_AND_CPU_COST.
This makes it easy to apply different cost modifiers in ha_..time()
functions for io and cpu costs.
- scan_time()
- rnd_pos_time() & rnd_pos_call_time()
- keyread_time()
- Enhanched keyread_time() to calculate the full cost of reading of a set
of keys with a given number of ranges and optional number of blocks that
need to be accessed.
- Removed read_time() as keyread_time() + rnd_pos_time() can do the same
thing and more.
- Tuned cost for: heap, myisam, Aria, InnoDB, archive and MyRocks.
Used heap table costs for json_table. The rest are using default engine
costs.
- Added the following new optimizer variables:
- optimizer_disk_read_ratio
- optimizer_disk_read_cost
- optimizer_key_lookup_cost
- optimizer_row_lookup_cost
- optimizer_row_next_find_cost
- optimizer_scan_cost
- Moved all engine specific cost to OPTIMIZER_COSTS structure.
- Changed costs to use 'records_out' instead of 'records_read' when
recalculating costs.
- Split optimizer_costs.h to optimizer_costs.h and optimizer_defaults.h.
This allows one to change costs without having to compile a lot of
files.
- Updated costs for filter lookup.
- Use a better cost estimate in best_extension_by_limited_search()
for the sorting cost.
- Fixed previous issues with 'filtered' explain column as we are now
using 'records_out' (min rows seen for table) to calculate filtering.
This greatly simplifies the filtering code in
JOIN_TAB::save_explain_data().
This change caused a lot of queries to be optimized differently than
before, which exposed different issues in the optimizer that needs to
be fixed. These fixes are in the following commits. To not have to
change the same test case over and over again, the changes in the test
cases are done in a single commit after all the critical change sets
are done.
InnoDB changes:
- Updated InnoDB to not divide big range cost with 2.
- Added cost for InnoDB (innobase_update_optimizer_costs()).
- Don't mark clustered primary key with HA_KEYREAD_ONLY. This will
prevent that the optimizer is trying to use index-only scans on
the clustered key.
- Disabled ha_innobase::scan_time() and ha_innobase::read_time() and
ha_innobase::rnd_pos_time() as the default engine cost functions now
works good for InnoDB.
Other things:
- Added --show-query-costs (\Q) option to mysql.cc to show the query
cost after each query (good when working with query costs).
- Extended my_getopt with GET_ADJUSTED_VALUE which allows one to adjust
the value that user is given. This is used to change cost from
microseconds (user input) to milliseconds (what the server is
internally using).
- Added include/my_tracker.h ; Useful include file to quickly test
costs of a function.
- Use handler::set_table() in all places instead of 'table= arg'.
- Added SHOW_OPTIMIZER_COSTS to sys variables. These are input and
shown in microseconds for the user but stored as milliseconds.
This is to make the numbers easier to read for the user (less
pre-zeros). Implemented in 'Sys_var_optimizer_cost' class.
- In test_quick_select() do not use index scans if 'no_keyread' is set
for the table. This is what we do in other places of the server.
- Added THD parameter to Unique::get_use_cost() and
check_index_intersect_extension() and similar functions to be able
to provide costs to called functions.
- Changed 'records' to 'rows' in optimizer_trace.
- Write more information to optimizer_trace.
- Added INDEX_BLOCK_FILL_FACTOR_MUL (4) and INDEX_BLOCK_FILL_FACTOR_DIV (3)
to calculate usage space of keys in b-trees. (Before we used numeric
constants).
- Removed code that assumed that b-trees has similar costs as binary
trees. Replaced with engine calls that returns the cost.
- Added Bitmap::find_first_bit()
- Added timings to join_cache for ANALYZE table (patch by Sergei Petrunia).
- Added records_init and records_after_filter to POSITION to remember
more of what best_access_patch() calculates.
- table_after_join_selectivity() changed to recalculate 'records_out'
based on the new fields from best_access_patch()
Bug fixes:
- Some queries did not update last_query_cost (was 0). Fixed by moving
setting thd->...last_query_cost in JOIN::optimize().
- Write '0' as number of rows for const tables with a matching row.
Some internals:
- Engine cost are stored in OPTIMIZER_COSTS structure. When a
handlerton is created, we also created a new cost variable for the
handlerton. We also create a new variable if the user changes a
optimizer cost for a not yet loaded handlerton either with command
line arguments or with SET
@@global.engine.optimizer_cost_variable=xx.
- There are 3 global OPTIMIZER_COSTS variables:
default_optimizer_costs The default costs + changes from the
command line without an engine specifier.
heap_optimizer_costs Heap table costs, used for temporary tables
tmp_table_optimizer_costs The cost for the default on disk internal
temporary table (MyISAM or Aria)
- The engine cost for a table is stored in table_share. To speed up
accesses the handler has a pointer to this. The cost is copied
to the table on first access. If one wants to change the cost one
must first update the global engine cost and then do a FLUSH TABLES.
This was done to be able to access the costs for an open table
without any locks.
- When a handlerton is created, the cost are updated the following way:
See sql/keycaches.cc for details:
- Use 'default_optimizer_costs' as a base
- Call hton->update_optimizer_costs() to override with the engines
default costs.
- Override the costs that the user has specified for the engine.
- One handler open, copy the engine cost from handlerton to TABLE_SHARE.
- Call handler::update_optimizer_costs() to allow the engine to update
cost for this particular table.
- There are two costs stored in THD. These are copied to the handler
when the table is used in a query:
- optimizer_where_cost
- optimizer_scan_setup_cost
- Simply code in best_access_path() by storing all cost result in a
structure. (Idea/Suggestion by Igor)
