Fixed the usage of spatial data (and Point in specific) with
non-spatial indexes.
Several problems :
- The length of the Point class was not updated to include the
spatial reference system identifier. Fixed by increasing with 4
bytes.
- The storage length of the spatial columns was not accounting for
the length that is prepended to it. Fixed by treating the
spatial data columns as blobs (and thus increasing the storage
length)
- When creating the key image for comparison in index read wrong
key image was created (the one needed for and r-tree search,
not the one for b-tree/other search). Fixed by treating the
spatial data columns as blobs (and creating the correct kind of
image based on the index type).
When a table was explicitly locked with LOCK TABLES no associated
tables from any related trigger on the subject table were locked.
As a result of this the user could experience unexpected locking
behavior and statement failures similar to "failed: 1100: Table'xx'
was not locked with LOCK TABLES".
This patch fixes this problem by making sure triggers are
pre-loaded on any statement if the subject table was explicitly
locked with LOCK TABLES.
- make ha_berkeley::cmp_ref() take into account that auto-generated PKs
are stored in LSB-first order.
- Remove the temporary code that made the bugfix work for innodb only
ORDER BY primary_key on InnoDB table
Queries that use an InnoDB secondary index to retrieve
data don't need to sort in case of ORDER BY primary key
if the secondary index is compared to constant(s).
They can also skip sorting if ORDER BY contains both the
the secondary key parts and the primary key parts (in
that order).
This is because InnoDB returns the rows in order of the
primary key for rows with the same values of the secondary
key columns.
Fixed by preventing temp table sort for the qualifying
queries.
causes full table lock on innodb table.
Also fixes Bug#28502 Triggers that update another innodb table
will block on X lock unnecessarily (duplciate).
Code review fixes.
Both bugs' synopses are misleading: InnoDB table is
not X locked. The statements, however, cannot proceed concurrently,
but this happens due to lock conflicts for tables used in triggers,
not for the InnoDB table.
If a user had an InnoDB table, and two triggers, AFTER UPDATE and
AFTER INSERT, competing for different resources (e.g. two distinct
MyISAM tables), then these two triggers would not be able to execute
concurrently. Moreover, INSERTS/UPDATES of the InnoDB table would
not be able to run concurrently.
The problem had other side-effects (see respective bug reports).
This behavior was a consequence of a shortcoming of the pre-locking
algorithm, which would not distinguish between different DML operations
(e.g. INSERT and DELETE) and pre-lock all the tables
that are used by any trigger defined on the subject table.
The idea of the fix is to extend the pre-locking algorithm to keep track,
for each table, what DML operation it is used for and not
load triggers that are known to never be fired.
The need arose when working on Bug 26141, where it became
necessary to replace TABLE_LIST with its forward declaration in a few
headers, and this involved a lot of s/TABLE_LIST/st_table_list/.
Although other workarounds exist, this patch is in line
with our general strategy of moving away from typedef-ed names.
Sometime in future we might also rename TABLE_LIST to follow the
coding style, but this is a huge change.
Thanks to Martin Friebe for finding and submitting a fix for this bug!
A table with maximum number of key segments and maximum length key name
would have a corrupted .frm file, due to an incorrect calculation of the
complete key length. Now the key length is computed correctly (I hope) :-)
MyISAM would reject a table with the maximum number of keys and the maximum
number of key segments in all keys. It would allow one less than this total
maximum. Now MyISAM accepts a table defined with the maximum. (This is a
very minor issue.)
ON conditions from JOIN expression were ignored at CHECK OPTION
check when updating a multi-table view with CHECK OPTION.
The st_table_list::prep_check_option function has been
modified to to take into account ON conditions at CHECK OPTION check
It was also changed to build the check option condition only once
for any update used in PS/SP.
When fields are inserted instead of * in the select list they were not marked
for check for the ONLY_FULL_GROUP_BY mode.
The Field_iterator_table::create_item() function now marks newly created
items for check when in the ONLY_FULL_GROUP_BY mode.
The setup_wild() and the insert_fields() functions now maintain the
cur_pos_in_select_list counter for the ONLY_FULL_GROUP_BY mode.
Bug 18914 (Calling certain SPs from triggers fail)
Bug 20713 (Functions will not not continue for SQLSTATE VALUE '42S02')
Bug 21825 (Incorrect message error deleting records in a table with a
trigger for inserting)
Bug 22580 (DROP TABLE in nested stored procedure causes strange dependency
error)
Bug 25345 (Cursors from Functions)
This fix resolves a long standing issue originally reported with bug 8407,
which affect the behavior of Stored Procedures, Stored Functions and Trigger
in many different ways, causing symptoms reported by all the bugs listed.
In all cases, the root cause of the problem traces back to 8407 and how the
server locks tables involved with sub statements.
Prior to this fix, the implementation of stored routines would:
- compute the transitive closure of all the tables referenced by a top level
statement
- open and lock all the tables involved
- execute the top level statement
"transitive closure of tables" means collecting:
- all the tables,
- all the stored functions,
- all the views,
- all the table triggers
- all the stored procedures
involved, and recursively inspect these objects definition to find more
references to more objects, until the list of every object referenced does
not grow any more.
This mechanism is known as "pre-locking" tables before execution.
The motivation for locking all the tables (possibly) used at once is to
prevent dead locks.
One problem with this approach is that, if the execution path the code
really takes during runtime does not use a given table, and if the table is
missing, the server would not execute the statement.
This in particular has a major impact on triggers, since a missing table
referenced by an update/delete trigger would prevent an insert trigger to run.
Another problem is that stored routines might define SQL exception handlers
to deal with missing tables, but the server implementation would never give
user code a chance to execute this logic, since the routine is never
executed when a missing table cause the pre-locking code to fail.
With this fix, the internal implementation of the pre-locking code has been
relaxed of some constraints, so that failure to open a table does not
necessarily prevent execution of a stored routine.
In particular, the pre-locking mechanism is now behaving as follows:
1) the first step, to compute the transitive closure of all the tables
possibly referenced by a statement, is unchanged.
2) the next step, which is to open all the tables involved, only attempts
to open the tables added by the pre-locking code, but silently fails without
reporting any error or invoking any exception handler is the table is not
present. This is achieved by trapping internal errors with
Prelock_error_handler
3) the locking step only locks tables that were successfully opened.
4) when executing sub statements, the list of tables used by each statements
is evaluated as before. The tables needed by the sub statement are expected
to be already opened and locked. Statement referencing tables that were not
opened in step 2) will fail to find the table in the open list, and only at
this point will execution of the user code fail.
5) when a runtime exception is raised at 4), the instruction continuation
destination (the next instruction to execute in case of SQL continue
handlers) is evaluated.
This is achieved with sp_instr::exec_open_and_lock_tables()
6) if a user exception handler is present in the stored routine, that
handler is invoked as usual, so that ER_NO_SUCH_TABLE exceptions can be
trapped by stored routines. If no handler exists, then the runtime execution
will fail as expected.
With all these changes, a side effect is that view security is impacted, in
two different ways.
First, a view defined as "select stored_function()", where the stored
function references a table that may not exist, is considered valid.
The rationale is that, because the stored function might trap exceptions
during execution and still return a valid result, there is no way to decide
when the view is created if a missing table really cause the view to be invalid.
Secondly, testing for existence of tables is now done later during
execution. View security, which consist of trapping errors and return a
generic ER_VIEW_INVALID (to prevent disclosing information) was only
implemented at very specific phases covering *opening* tables, but not
covering the runtime execution. Because of this existing limitation,
errors that were previously trapped and converted into ER_VIEW_INVALID are
not trapped, causing table names to be reported to the user.
This change is exposing an existing problem, which is independent and will
be resolved separately.
ENUMs weren't allowed to have character 0xff, a perfectly good character in some locales.
This was circumvented by mapping 0xff in ENUMs to ',', thereby prevent actual commas from
being used. Now if 0xff makes an appearance, we find a character not used in the enum and
use that as a separator. If no such character exists, we throw an error.
Any solution would have broken some sort of existing behaviour. This solution should
serve both fractions (those with 0xff and those with ',' in their enums), but
WILL REQUIRE A DUMP/RESTORE CYCLE FROM THOSE WITH 0xff IN THEIR ENUMS. :-/
That is, mysqldump with their current server, and restore when upgrading to one with
this patch.
The crash happens because second filling of the same I_S table happens in
case of subselect with order by. table->sort.io_cache previously allocated
in create_sort_index() is deleted during second filling
(function get_schema_tables_result). There are two places where
I_S table can be filled: JOIN::exec and create_sort_index().
To fix the bug we should check if the table was already filled
in one of these places and skip processing of the table in second.
Two problems here:
Problem 1:
While constructing the join columns list the optimizer does as follows:
1. Sets the join_using_fields/natural_join members of the right JOIN
operand.
2. Makes a "table reference" (TABLE_LIST) to parent the two tables.
3. Assigns the join_using_fields/is_natural_join of the wrapper table
using join_using_fields/natural_join of the rightmost table
4. Sets join_using_fields to NULL for the right JOIN operand.
5. Passes the parent table up to the same procedure on the upper
level.
Step 1 overrides the the join_using_fields that are set for a nested
join wrapping table in step 4.
Fixed by making a designated variable SELECT_LEX::prev_join_using to
pass the data from step 1 to step 4 without destroying the wrapping
table data.
Problem 2:
The optimizer checks for ambiguous columns while transforming
NATURAL JOIN/JOIN USING to JOIN ON. While doing that there was no
distinction between columns that are used in the generated join
condition (where ambiguity can be checked) and the other columns
(where ambiguity can be checked only when resolving references
coming from outside the JOIN construct itself).
Fixed by allowing the non-USING columns to be present in multiple
copies in both sides of the join and moving the ambiguity check
to the place where unqualified references to the join columns are
resolved (find_field_in_natural_join()).
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
Having broken .frm, particulary number of field names does
not match number of fields, causes server crash.
Refuse to open a table if number of field names in a table
is not equal to number of fields in a table.
No test case, since it requires broken .frm file.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
If a view was created with the DEFINER security and later the definer user
was dropped then a SELECT from the view throws the error message saying that
there is no definer user is registered. This is ok for a root but too much
for a mere user.
Now the st_table_list::prepare_view_securety_context() function reveals
the absence of the definer only to a superuser and throws the 'access denied'
error to others.
(Mostly in DBUG_PRINT() and unused arguments)
Fixed bug in query cache when used with traceing (--with-debug)
Fixed memory leak in mysqldump
Removed warnings from mysqltest scripts (replaced -- with #)
This is a performance issue for queries with subqueries evaluation
of which requires filesort.
Allocation of memory for the sort buffer at each evaluation of a
subquery may take a significant amount of time if the buffer is rather big.
With the fix we allocate the buffer at the first evaluation of the
subquery and reuse it at each subsequent evaluation.
