1. wait for the binlog thread to reach the certain state, don't use
a debug_sync that's incorrectly placed to detect the state
2. no need to do a (non-deterministic) `show binlog events` to verify
what is guaranteed by the directly preceding line
(This commit is for 10.3 and upper branches)
In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
BINLOG '
base64 encoded data for A
### verbose section for A
base64 encoded data for B
### verbose section for B
'/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.
The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
BINLOG '
base64 encoded data for A
base64 encoded data for B
'/*!*/;
### verbose section for A
### verbose section for B
Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.
(This commit is exclusively for 10.2 branch. Do not merge it to 10.3)
In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
BINLOG '
base64 encoded data for A
### verbose section for A
base64 encoded data for B
### verbose section for B
'/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.
The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
BINLOG '
base64 encoded data for A
base64 encoded data for B
'/*!*/;
### verbose section for A
### verbose section for B
Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.
Shutdown of mtr tests may be too impatient, esp on CI environment where
10 seconds of `arg` of `shutdown_server arg` may not be enough for the clean
shutdown to complete.
This is fixed to remove explicit non-zero timeout argument to
`shutdown_server` from all mtr tests. mysqltest computes 60 seconds default
value for the timeout for the argless `shutdown_server` command.
This policy is additionally ensured with a compile time assert.
Problem:
========
During point in time recovery of binary log syntax error is reported for
BEGIN statement and recovery fails.
Analysis:
=========
In MariaDB 10.3 and later, setting the sql_mode system variable to Oracle
allows the server to understand a subset of Oracle's PL/SQL language. When
sql_mode=ORACLE is set, it switches the parser from the MariaDB parser to
Oracle compatible parser. With this change 'BEGIN' is not considered as
'START TRANSACTION'. Hence the syntax error is reported.
Fix:
===
At preset 'BEGIN' query is generated from 'Gtid_log_event::print'. The current
session specific 'sql_mode' information is not present as part of
'Gtid_log_event'. If it was available then, mysqlbinlog tool can make use of
'sql_mode == ORACLE' and can output "START TRANSACTION" in this particular
mode and for other sql_modes it will write "BEGIN" as part of output. Since it
is not available 'mysqlbinlog' tool will output all 'BEGIN' statements as
'START TRANSACTION' irrespective of 'sql_mode'.
Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.
Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.
MDEV-19964 S3 replication support
Added new configure options:
s3_slave_ignore_updates
"If the slave has shares same S3 storage as the master"
s3_replicate_alter_as_create_select
"When converting S3 table to local table, log all rows in binary log"
This allows on to configure slaves to have the S3 storage shared or
independent from the master.
Other thing:
Added new session variable '@@sql_if_exists' to force IF_EXIST to DDL's.
Description:
============
To change 'CONSERVATIVE' @@global.slave_parallel_mode default to 'OPTIMISTIC'
in 10.5.
@sql/sys_vars.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/rpl_filter.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/mysqld.cc
Removed the initialization of 'SLAVE_PARALLEL_CONSERVATIVE' to
'opt_slave_parallel_mode' variable.
@mysql-test/suite/rpl/t/rpl_parallel_mdev6589.test
@mysql-test/suite/rpl/t/rpl_mdev6386.test
Added 'mtr' suppression to ignore 'ER_PRIOR_COMMIT_FAILED'. In case of
'OPTIMISTIC' mode if a transaction gets killed during "wait_for_prior_commit"
it results in above error "1964". Hence suppression needs to be added for this
error.
@mysql-test/suite/rpl/t/rpl_parallel_conflicts.test
Test has a 'slave.opt' which explicitly sets slave_parallel_mode to
'conservative'. When the test ends this mode conflicts with new default mode.
Hence check test case reports an error. The 'slave.opt' is removed and options
are set and reset within test.
@mysql-test/suite/multi_source/info_logs.result
@mysql-test/suite/multi_source/reset_slave.result
@mysql-test/suite/multi_source/simple.result
Result content mismatch in "show slave status" output. This is expected as new
slave_parallel_mode='OPTIMISTIC'.
@mysql-test/include/check-testcase.test
Updated default 'slave_parallel_mode' to 'optimistic'.
Refactored rpl_parallel.test into following test cases.
Test case 1: @mysql-test/suite/rpl/t/rpl_parallel_domain.test
Test case 2: @mysql-test/suite/rpl/t/rpl_parallel_domain_slave_single_grp.test
Test case 3: @mysql-test/suite/rpl/t/rpl_parallel_single_grpcmt.test
Test case 4: @mysql-test/suite/rpl/t/rpl_parallel_stop_slave.test
Test case 5: @mysql-test/suite/rpl/t/rpl_parallel_slave_bgc_kill.test
Test case 6: @mysql-test/suite/rpl/t/rpl_parallel_gco_wait_kill.test
Test case 7: @mysql-test/suite/rpl/t/rpl_parallel_free_deferred_event.test
Test case 8: @mysql-test/suite/rpl/t/rpl_parallel_missed_error_handling.test
Test case 9: @mysql-test/suite/rpl/t/rpl_parallel_innodb_lock_conflict.test
Test case 10: @mysql-test/suite/rpl/t/rpl_parallel_gtid_slave_pos_update_fail.test
Test case 11: @mysql-test/suite/rpl/t/rpl_parallel_wrong_exec_master_pos.test
Test case 12: @mysql-test/suite/rpl/t/rpl_parallel_partial_binlog_trans.test
Test case 13: @mysql-test/suite/rpl/t/rpl_parallel_ignore_error_on_rotate.test
Test case 14: @mysql-test/suite/rpl/t/rpl_parallel_wrong_binlog_order.test
Test case 15: @mysql-test/suite/rpl/t/rpl_parallel_incorrect_relay_pos.test
Test case 16: @mysql-test/suite/rpl/t/rpl_parallel_retry_deadlock.test
Test case 17: @mysql-test/suite/rpl/t/rpl_parallel_deadlock_corrupt_binlog.test
Test case 18: @mysql-test/suite/rpl/t/rpl_parallel_mode.test
Test case 19: @mysql-test/suite/rpl/t/rpl_parallel_analyze_table_hang.test
Test case 20: @mysql-test/suite/rpl/t/rpl_parallel_record_gtid_wakeup.test
Test case 21: @mysql-test/suite/rpl/t/rpl_parallel_stop_on_con_kill.test
Test case 22: @mysql-test/suite/rpl/t/rpl_parallel_rollback_assert.test