As a side-effect of purge_relay_logs(), sql_slave_skip_counter
was silently ignored in GTID mode.
But sql_slave_skip_counter in fact is not a good match with GTID.
And it is not really needed either, as users can explicitly set
@@gtid_slave_pos to skip specific GTIDs, in a way that matches
well how GTID replication works.
So with this patch, we give an error on attempts to set
sql_slave_skip_counter when using GTID, with a suggestion to use
gtid_slave_pos instead, if needed.
Add a test case for killing a waiting query in parallel replication.
Fix several bugs found:
- We should not wakeup_subsequent_commits() in ha_rollback_trans(), since we
do not know the right wakeup_error() to give.
- When a wait_for_prior_commit() is killed, we must unregister from the
waitee so we do not race and get an extra (non-kill) wakeup.
- We need to deal with error propagation correctly in queue_for_group_commit
when one thread is killed.
- Fix one locking issue in queue_for_group_commit(), we could unlock the
waitee lock too early and this end up processing wakeup() with insufficient
locking.
- Fix Xid_log_event::do_apply_event; if commit fails it must not update the
in-memory @@gtid_slave_pos state.
- Fix and cleanup some things in the rpl_parallel.cc error handling.
- Add a missing check for killed in the slave sql driver thread, to avoid a
race.
(and valgrind warnings)
* move thd userstat initialization to the same function
that was adding thd userstat to global counters.
* initialize thd->start_bytes_received in THD::init
(when thd->userstat_running is set)
MDEV-5217: Last_sql_error lost in parallel replication.
For some reason, the query execution code in log_event.cc call
rli->clear_error for each event (part of clear_all_errors()).
This causes a problem in parallel replication, where the
execution in one worker thread could clear the error set by
another thread, causing the SQL thread to stop but leaving no
error visible in SHOW SLAVE STATUS.
There seems to be no reason to clear the global error code
in Relay_log_info for each event execution, from code review
and from running the test suite. So remove this clearing of
the error code to make things work also in the parallel case.
In parallel replication, there are two kinds of events which are
executed in different ways.
Normal events that are part of event groups/transactions are executed
asynchroneously by being queued for a worker thread.
Other events like format description and rotate and such are executed
directly in the driver SQL thread.
If the direct execution of the other events were to update the old-style
position, then the position gets updated too far ahead, before the normal
events that have been queued for a worker thread have been executed. So
this patch adds some special cases to prevent such position updates ahead
of time, and instead queues dummy events for the worker threads, so that
they will at an appropriate time do the position updates instead.
(Also fix a race in a test case that happened to trigger while running
tests for this patch).
Fix some more parts of old-style position updates.
Now we save in rgi some coordinates for master log and relay log, so
that in do_update_pos() we can use the right set of coordinates with
the right events.
The Rotate_log_event::do_update_pos() is fixed in the parallel case
to not directly update relay-log.info (as Rotate event runs directly
in the driver SQL thread, ahead of actual event execution). Instead,
group_master_log_file is updated as part of do_update_pos() in each
event execution.
In the parallel case, position updates happen in parallel without
any ordering, but taking care that position is not updated backwards.
Since position update happens only after event execution this leads
to the right result.
Also fix an access-after-free introduced in an earlier commit.
Fix some part of update of old-style coordinates in parallel replication:
- Ignore XtraDB request for old-style coordinates, not meaningful for
parallel replication (must use GTID to get crash-safe parallel slave).
- Only update relay log coordinates forward, not backwards, to ensure
that parallel threads do not conflict with each other.
- Move future_event_relay_log_pos to rgi.
REPLICATION FILTERS ARE USED.
Problem:
When Filtered-slave applies Int_var_log_event and when it
tries to write the event to its own binlog, LAST_INSERT_ID
value is written wrongly.
Analysis:
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
is a variable which is set when LAST_INSERT_ID() is used by
a statement. If it is set, first_successful_insert_id_in_
prev_stmt_for_binlog will be stored in the statement-based
binlog. This variable is CUMULATIVE along the execution of
a stored function or trigger: if one substatement sets it
to 1 it will stay 1 until the function/trigger ends,
thus making sure that first_successful_insert_id_in_
prev_stmt_for_binlog does not change anymore and is
propagated to the caller for binlogging. This is achieved
using the following code
if(!stmt_depends_on_first_successful_insert_id_in_prev_stmt)
{
/* It's the first time we read it */
first_successful_insert_id_in_prev_stmt_for_binlog=
first_successful_insert_id_in_prev_stmt;
stmt_depends_on_first_successful_insert_id_in_prev_stmt= 1;
}
Slave server, after receiving Int_var_log_event event from
master, it is setting
stmt_depends_on_first_successful_insert_id_in_prev_stmt
to true(*which is wrong*) and not setting
first_successful_insert_id_in_prev_stmt_for_binlog. Because
of this problem, when the actual DML statement with
LAST_INSERT_ID() is parsed by slave SQL thread,
first_successful_insert_id_in_prev_stmt_for_binlog is not
set. Hence the value zero (default value) is written to
slave's binlog.
Why only *Filtered slave* is effected when the code is
in common place:
-------------------------------------------------------
In Query_log_event::do_apply_event,
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
is reset to zero at the end of the function. In case of
normal slave (No Filters), this variable will be reset.
In Filtered slave, Slave SQL thread defers all IRU events's
execution until IRU's Query_log event is received. Once it
receives Query_log_event it executes all pending IRU events
and then it executes Query_log_event. Hence the variable is
not getting reset to 0, causing this bug.
Fix: As described above, the root cause was setting
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
when Int_var_log_event was executed by a SQL thread. Hence
removing the problematic line from the code.
-row_stmt_start_timestamp
-last_event_start_time
-long_find_row_note
-trans_retries
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/log_event.cc:
row_stmt_start and long_find_row_note is now in rpl_group_info
sql/mysqld.cc:
Added slave_executed_entries_lock to protect rli->executed_entries
sql/mysqld.h:
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
sql/rpl_parallel.cc:
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/rpl_rli.cc:
Moved row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/rpl_rli.h:
Moved trans_retries, row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/slave.cc:
Use rgi for trans_retries and last_event_start_time
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
Reset trans_retries when object is created
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
Currently several places use description_event->common_header_len instead of
LOG_EVENT_MINIMAL_HEADER_LEN when parsing events with "frozen" headers (such
as Start_event_v3 and its subclasses such as Format_description_log_event, as
well as Rotate_event). This causes events with extra headers (which would otherwise
be valid and those headers ignored) to be corrupted due to over-reading or skipping
into the data portion of the log events.
It is rewritten in some details patch of Jeremy Cole (See MDEV):
- The virtual function returns length to avoid IFs (and only one call of the virtual function made)
- Printing function avoids printing strings
Dump thread may encounter an error when reading events from the active binlog
file. However the errors may be temporary, so dump thread will try to read
the event again. But dump thread seeked to an wrong position, it caused some
events was sent twice.
To fix the bug, prev_pos is defined out the while loop and is set the correct
position after reading every event correctly.
This patch also make binlog_can_be_corrupted more accurate, only the binlogs
not closed normally are marked binlog_can_be_corrupted.
Finally, two warnings are added when dump threads encounter the temporary
errors.
mysql-test/suite/rpl/r/last_insert_id.result:
Test case for last_insert_id
mysql-test/suite/rpl/t/last_insert_id.cnf:
Test case for last_insert_id
mysql-test/suite/rpl/t/last_insert_id.test:
Test case for last_insert_id
sql/log_event.cc:
Added DBUG_PRINT
Set thd->first_successful_insert_id_in_prev_stmt_for_binlog when setting thd->first_successful_insert_id_in_prev_stmt.
This is required to get last_insert_id() replicated.
This is analog to how read_first_successful_insert_id_in_prev_stmt() works.
sql/rpl_utility.cc:
Added DBUG_PRINT
The ignored events are not written to the relay log, but instead a fake
Rotate event is generated to handle update of position.
Extend this for Gtid so we similarly generate a fake Gtid_list event
to update the GTID position.
Also fix an unrelated test issue that got triggered by the added test cases.
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
Fix a bunch of issues found with locking, ordering, and non-thread-safe stuff
in Relay_log_info.
Now able to do a simple benchmark, showing 4.5 times speedup for applying a
binlog with 10000 REPLACE statements.
- Make query plan be re-saved after the first join execution
(saving it after JOIN::cleanup is too late because EXPLAIN output
is currently produced before that)
- Handle QPF allocation/deallocation for edge cases, like unsuccessful
BINLOG command.
- Work around the problem with UNION's direct subselects not being visible.
- Update test results ("Using temporary; Using filesort" are now always printed
last in the Extra column)
- This cset gets rid of memory leaks/crashes. Some result mismatches still remain.
In record_gtid(), too many rows were deleted from the slave position
hash - we need to always keep on to the most recent committed row,
so we have a valid slave position at all times.
See also MySQL Bug #39750 and similar ones.
Fix my_delete() on Windows, to safely remvoe files on Windows, including files that are opened by another threads in the same process, antiviruses and backup applications. If file to be deleted is also opened by another thread, the file is renamed to unique name prior to deletion - this makes it possible to create file with the same name right after deletion.
With this patch my_delete_allow_opened() becomes obsolete and is replaced with my_delete().
This patch is rework of the patch http://lists.mysql.com/commits/59327 for MySQL bug#39750.
When @@GLOBAL.gtid_strict_mode=1, then certain operations result
in error that would otherwise result in out-of-order binlog files
between servers.
GTID sequence numbers are now allocated independently per domain;
this results in less/no holes in GTID sequences, increasing the
likelyhood that diverging binlogs will be caught by the slave when
GTID strict mode is enabled.
The problem was the Gtid_list event which is logged to the binlog in
10.0 and is not understood by the 5.5 server.
This event is supposed to be replaced with a dummy event for 5.5
servers. But the very first event logged in the very first binlog
has an empty list of GTID, which makes the event too short to be
replacable with an empty event.
The fix is to pad the empty Gtid_list event to be big enough to
be replacable by a dummy event.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
Implement START SLAVE UNTIL master_gtid_pos = "<GTID position>".
Add test cases, including a test showing how to use this to promote
a new master among a set of slaves.
