A syntax error was reported for any INSERT statement with explicit
partition selection it if i used a column list.
Fixed by saving the parsing place before parsing the clause for explicit
partition selection and restoring it when the clause has been parsed.
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
The patches features an optional shutdown behavior to hold on until
after all connected slaves have been sent the last binlogged event.
The connected slave is one whose START SLAVE has been acknowledged and
that was not stopped since that though it could be technically
reconnecting in background.
The solution therefore disallows killing the dump thread until is has
found EOF of the latest binlog file. It is up to the shutdown
requester (DBA) to set up a sufficiently large shutdown timeout value
for shudown to wait patiently until lagging behind slaves have been
synchronized. On the other hand if a specific slave needs exclusion
from synchronization the DBA would have to stop it manually which
would terminate its dump thread.
`mysqladmin shutdown' is extended with a `--wait_for_all_slaves' option
which translates to `SHUTDOW WAIT FOR ALL SLAVES' sql query
to enable the feature on the client side.
The patch also performs a small refactoring of the server shutdown
around close_connections() to introduce kill thread phases which
are two as of current.
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
Part#2 (final): rewritting the code to pass the correct enum_sp_aggregate_type
to the sp_head constructor, so sp_head never changes its aggregation type
later on. The grammar has been simplified and defragmented.
This allowed to check aggregate specific instructions right after
a routine body has been scanned, by calling new LEX methods:
sp_body_finalize_{procedure|function|trigger|event}()
Moving some C++ code from *.yy to a few new helper methods in LEX.
post-merge changes:
* handle password expiration on old tables like everything else -
make changes in memory, even if they cannot be done on disk
* merge "debug" tests with non-debug tests, they don't use dbug anyway
* only run rpl password expiration in MIXED mode, it doesn't replicate
anything, so no need to repeat it thrice
* restore update_user_table_password() prototype, it should not change
ACL_USER, this is done in acl_user_update()
* don't parse json twice in get_password_lifetime and get_password_expired
* remove LEX_USER::is_changing_password, see if there was any auth instead
* avoid overflow in expiration calculations
* don't initialize Account_options in the constructor, it's bzero-ed later
* don't create ulong sysvars - they're not portable, prefer uint or ulonglong
* misc simplifications
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
* inject portion of time updates into mysql_delete main loop
* triggered case emits delete+insert, no updates
* PORTION OF `SYSTEM_TIME` is forbidden
* `DELETE HISTORY .. FOR PORTION OF ...` is forbidden as well
1. Renaming Type_handler_json to Type_handler_json_longtext
There will be other JSON handlers soon, e.g. Type_handler_json_varchar.
2. Making the code more symmetric for data types:
- Adding a new virtual method
Type_handler::Column_definition_validate_check_constraint()
- Moving JSON-specific code from sql_yacc.yy to
Type_handler_json_longtext::Column_definition_validate_check_constraint()
3. Adding new files sql_type_json.cc and sql_type_json.h
and moving Type_handler+JSON related code into these files.
Allow ALGORITHM=INSTANT (or avoid touching any data)
when changing the collation, or in some cases, the character set,
of a non-indexed CHAR or VARCHAR column. There is no penalty
for subsequent DDL or DML operations, and compatibility with
older MariaDB versions will be unaffected.
Character sets may be changed when the old encoding is compatible
with the new one. For example, changing from ASCII to anything
ASCII-based, or from 3-byte to 4-byte UTF-8 can sometimes be
performed instantly.
This is joint work with Eugene Kosov.
The test cases as well as ALTER_CONVERT_TO, charsets_are_compatible(),
Type_handler::Charsets_are_compatible() are his work.
The Field_str::is_equal(), Field_varstring::is_equal() and
the InnoDB changes were mostly rewritten by me due to conflicts
with MDEV-15563.
Limitations:
Changes of indexed columns will still require
ALGORITHM=COPY. We should allow ALGORITHM=NOCOPY and allow
the indexes to be rebuilt inside the storage engine,
without copying the entire table.
Instant column size changes (in bytes) are not supported by
all storage engines.
Instant CHAR column changes are only allowed for InnoDB
ROW_FORMAT=REDUNDANT. We could allow this for InnoDB
when the CHAR internally uses a variable-length encoding,
say, when converting from 3-byte UTF-8 to 4-byte UTF-8.
Instant VARCHAR column changes are allowed for InnoDB
ROW_FORMAT=REDUNDANT, and for others only if the size
in bytes does not change from 128..255 bytes to more
than 256 bytes.
Inside InnoDB, this slightly changes the way how MDEV-15563
works and fixes the result of the innodb.instant_alter_extend test.
We change the way how ALTER_COLUMN_EQUAL_PACK_LENGTH_EXT
is handled. All column extension, type changes and renaming
now go through a common route, except when ctx->is_instant()
is in effect, for example, instant ADD or DROP COLUMN has
been initiated. Only in that case we will go through
innobase_instant_try() and rewrite all column metadata.
get_type(field, prtype, mtype, len): Convert a SQL data type into
InnoDB column metadata.
innobase_rename_column_try(): Remove the update of SYS_COLUMNS.
innobase_rename_or_enlarge_column_try(): New function,
replacing part of innobase_rename_column_try() and all of
innobase_enlarge_column_try(). Also changes column types.
innobase_rename_or_enlarge_columns_cache(): Also change
the column type.
move account options from LEX to Account_options structure
namely, mqh and ssl_*
Also, use LEX_CSTRING for ssl_*/x509_* strings and move
setting of ACL_USER::account_locked where it belongs
Add server support for user account locking.
This patch extends the ALTER/CREATE USER statements for
denying a user's subsequent login attempts:
ALTER USER
user [, user2] ACCOUNT [LOCK | UNLOCK]
CREATE USER
user [, user2] ACCOUNT [LOCK | UNLOCK]
The SHOW CREATE USER statement was updated to display the
locking state of an user.
Closes#1006
When creating a field of type JSON, it will be automatically
converted to TEXT with CHECK (json_valid(`a`)), if there wasn't any
previous check for the column.
Additional things:
- Added two bug fixes that was found while testing JSON. These bug
fixes has also been pushed to 10.3 (with a test case), but as they
where minimal and needed to get this task done and tested, the fixes
are repeated here.
- CREATE TABLE ... SELECT drops constraints for columns that
are both in the create and select part.
- If one has both a default expression and check constraint for a
column, one can get the error "Expression for field `a` is refering
to uninitialized field `a`.
- Removed some duplicate MYSQL_PLUGIN_IMPORT symbols
introduce the syntax
... IDENTIFIED { WITH | VIA }
plugin [ { USING | AS } auth ]
[ OR plugin [ { USING | AS } auth ]
[ OR ... ]]
Server will try auth plugins in the specified order until the first
success. No protocol changes, server uses the existing "switch plugin"
packet.
The auth chain is stored in json as
"auth_or":[{"plugin":"xxx","authentication_string":"yyy"},
{},
{"plugin":"foo","authentication_string":"bar"},
...],
"plugin":"aaa", "authentication_string":"bbb"
Note:
* "auth_or" implies that there might be "auth_and" someday;
* one entry in the array is an empty object, meaning to take plugin/auth
from the main json object. This preserves compatibility with
the existing mysql.global_priv table and with the mysql.user view.
This entry is preferrably a mysql_native_password plugin for a
non-empty mysql.user.password column.
SET PASSWORD is supported and changes the password for the *first*
plugin in the chain that has a notion of a "password"
The problem was originally stated in
http://bugs.mysql.com/bug.php?id=82212
The size of an base64-encoded Rows_log_event exceeds its
vanilla byte representation in 4/3 times.
When a binlogged event size is about 1GB mysqlbinlog generates
a BINLOG query that can't be send out due to its size.
It is fixed with fragmenting the BINLOG argument C-string into
(approximate) halves when the base64 encoded event is over 1GB size.
The mysqlbinlog in such case puts out
SET @binlog_fragment_0='base64-encoded-fragment_0';
SET @binlog_fragment_1='base64-encoded-fragment_1';
BINLOG @binlog_fragment_0, @binlog_fragment_1;
to represent a big BINLOG.
For prompt memory release BINLOG handler is made to reset the BINLOG argument
user variables in the middle of processing, as if @binlog_fragment_{0,1} = NULL
is assigned.
Notice the 2 fragments are enough, though the client and server still may
need to tweak their @@max_allowed_packet to satisfy to the fragment
size (which they would have to do anyway with greater number of
fragments, should that be desired).
On the lower level the following changes are made:
Log_event::print_base64()
remains to call encoder and store the encoded data into a cache but
now *without* doing any formatting. The latter is left for time
when the cache is copied to an output file (e.g mysqlbinlog output).
No formatting behavior is also reflected by the change in the meaning
of the last argument which specifies whether to cache the encoded data.
Rows_log_event::print_helper()
is made to invoke a specialized fragmented cache-to-file copying function
which is
copy_cache_to_file_wrapped()
that takes care of fragmenting also optionally wraps encoded
strings (fragments) into SQL stanzas.
my_b_copy_to_file()
is refactored to into my_b_copy_all_to_file(). The former function
is generalized
to accepts more a limit argument to constraint the copying and does
not reinitialize anymore the cache into reading mode.
The limit does not do any effect on the fully read cache.
Issue:
------
When a subquery contains UNION the count of the number of
subquery columns is calculated incorrectly. Only the first
query block in the subquery's UNION is considered and an
array indexing goes out-of-bounds, and this is caught by an
assert.
Solution:
---------
Sum up the columns from all query blocks of the query
expression.
Change specific to 5.6/5.5:
---------------------------
The "child" points to the last query block of the UNION
(as opposed to 5.7+ where it points to the first member of
UNION). So "child->master_unit()->first_select()" is used
to reach the first query block of UNION.
MDEV-17772 - 3 way lock : ALTER, MDL, BACKUP STAGE BLOCK_DDL
While waiting for a (potentially long) RO transaction or SELECT, DDL and
LOCK TABLES ... WRITE hold protection against FTWRL and BACKUP STAGE.
This effectively makes FTWRL/BACKUP STAGE indirectly wait for this RO
transaction or SELECT to finish. Which is not great, as otherwise we
could do something useful meanwhile.
With this patch BACKUP lock is attempted to be acquired after TABLE/SCHEMA
locks. If this attempt fails, TABLE/SCHEMA locks gets released and we
start waiting for BACKUP lock. When wait finishes, BACKUP lock is released
(to avoid deadlocks) and we attempt to acquire all locks once again.
Other changes:
- Take MDL lock before testing if table exists as part of
CREATE TABLE ... IF EXISTS. This change was an effect of changes in
lock_table_name and removes an inconsistency where one could get
different error messages from CREATE TABLE .. IF EXISTS depending on
active mdl locks.
One effect of this change is that we don't binary log CREATE TABLE IF
EXISTS if the table exists. This was done because old code was sometimes
behaving inconsistenly (it was logged some time and not other times)
and sending the query to the slave could make the slave even more
inconsistent as there is not guarantee that the new table will have
the same definition as the old table on the master.
Part of MDEV-5336 Implement LOCK FOR BACKUP
- Changed check of Global_only_lock to also include BACKUP lock.
- We store latest MDL_BACKUP_DDL lock in thd->mdl_backup_ticket to be able
to downgrade lock during copy_data_between_tables()
Added support for usual agreggate UDF (UDAF)
Added remove() call support for more efficient window function processing
Added example of aggregate UDF with efficient windows function support
