41 commits

Author	SHA1	Message	Date
marko	c9a465bb14	branches/innodb+: Merge revisions 6504:6560 from branches/zip: ... ------------------------------------------------------------------------ r6521 | marko | 2010-01-27 10:49:01 +0200 (Wed, 27 Jan 2010) | 17 lines branches/zip: Drop temporary tables at startup. This addresses the third aspect of Bug #41609. row_mysql_drop_temp_tables(): New function, to drop all temporary tables. These can be distinguished by the least significant bit of MIX_LEN. However, we will skip ROW_FORMAT=REDUNDANT tables, because in the records for those tables, that bit may be garbage. recv_recovery_from_checkpoint_finish(): Invoke row_mysql_drop_temp_tables(). Normally, if the .frm files for the temporary tables exist at startup, MySQL will ask InnoDB to drop the temporary tables. However, if the files are deleted, for instance, by the boot scripts of the operating system, the tables would remain in the InnoDB data dictionary unless someone digs them up by innodb_table_monitor and creates .frm files for dropping the tables. rb://221 approved by Sunny Bains. ------------------------------------------------------------------------ r6525 | marko | 2010-01-28 16:23:15 +0200 (Thu, 28 Jan 2010) | 11 lines branches/zip: buf_LRU_invalidate_tablespace(): Do not unnecessarily acquire the block_mutex for every block in the LRU list. Only acquire it when holding buf_pool_mutex is not sufficient. This should speed up the function and considerably reduce traffic on the memory bus and caches. I noticed this deficiency when working on Issue #157. This deficiency popped up again in Issue #449 (Bug #35077), which this fix does not fully address. rb://78 revision 1 approved by Heikki Tuuri. ------------------------------------------------------------------------ r6526 | jyang | 2010-01-28 18:12:40 +0200 (Thu, 28 Jan 2010) | 8 lines branches/zip: Add index translation table to map mysql index number to InnoDB index structure directly. Fix Bug #47622: "the new index is added before the existing ones in MySQL, but after one in SE". rb://215, approved by Marko ------------------------------------------------------------------------ r6527 | vasil | 2010-01-29 14:39:48 +0200 (Fri, 29 Jan 2010) | 6 lines branches/zip: Extend the comment about row_mysql_handle_errors(). Suggested by: Heikki ------------------------------------------------------------------------ r6533 | calvin | 2010-01-29 23:31:59 +0200 (Fri, 29 Jan 2010) | 4 lines branches/zip: remove duplicated copyright and license info. ------------------------------------------------------------------------ r6534 | sunny | 2010-01-29 23:42:49 +0200 (Fri, 29 Jan 2010) | 15 lines branches/zip: Two changes to fix the problem: 1. First scan the joining transaction's locks and check if no other transaction is waiting for a lock held by the joining transaction. If no other transaction is waiting then no deadlock an occur and we avoid doing an exhaustive search. 2. Change the direction of the lock traversal from backward to forward. Previously we traversed backward from the lock that has to wait, the function to that fetched the previous node was very inefficient resulting in O(n^2) access to the rec lock list. Fix Bug #49047 InnoDB deadlock detection is CPU intensive with many locks on a single row. rb://218 ------------------------------------------------------------------------ r6539 | marko | 2010-02-01 11:31:12 +0200 (Mon, 01 Feb 2010) | 75 lines branches/zip: Merge revisions 6471:6538 from branches/5.1: ------------------------------------------------------------------------ r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test into a separate test/result files. ------------------------------------------------------------------------ r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines Changed paths: A /branches/5.1/mysql-test/innodb-autoinc-44030.result A /branches/5.1/mysql-test/innodb-autoinc-44030.test branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test into a separate test/result files. ------------------------------------------------------------------------ r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line Changed paths: M /branches/5.1/mysql-test/innodb-autoinc-44030.test branches/5.1: Add reference to bug#47621 in the comment. ------------------------------------------------------------------------ r6535 | sunny | 2010-01-30 00:08:40 +0200 (Sat, 30 Jan 2010) | 11 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Undo the change from r6424. We need to return DB_SUCCESS even if we were unable to initialize the tabe autoinc value. This is required for the open to succeed. The only condition we currently treat as a hard error is if the autoinc field instance passed in by MySQL is NULL. Previously if the table autoinc value was 0 and the next value was requested we had an assertion that would fail. Change that assertion and treat a value of 0 to mean that the autoinc system is unavailable. Generation of next value will now return failure. rb://237 ------------------------------------------------------------------------ r6536 | sunny | 2010-01-30 00:13:42 +0200 (Sat, 30 Jan 2010) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Check *first_value everytime against the column max value and set *first_value to next autoinc if it's > col max value. ie. not rely on what is passed in from MySQL. [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value rb://236 ------------------------------------------------------------------------ r6537 | sunny | 2010-01-30 00:35:00 +0200 (Sat, 30 Jan 2010) | 2 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Undo r6536. ------------------------------------------------------------------------ r6538 | sunny | 2010-01-30 00:43:06 +0200 (Sat, 30 Jan 2010) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Check *first_value every time against the column max value and set *first_value to next autoinc if it's > col max value. ie. not rely on what is passed in from MySQL. [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value rb://236 ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6540 | marko | 2010-02-01 11:35:13 +0200 (Mon, 01 Feb 2010) | 1 line branches/zip: ChangeLog: Document the merge of 6471:6538 from branches/5.1. ------------------------------------------------------------------------ r6546 | jyang | 2010-02-03 11:05:24 +0200 (Wed, 03 Feb 2010) | 9 lines branches/zip: Relax assertion on the number of index defined in InnoDB must be comparable with that of MySQL to tolerate possible dictionary inconsistency. Fix Mantis issue #455, "UNIV_DEBUG+ assert ha_innodb.cc:3152 ib_num_index >= mysql_num_index". rb://248 Approved by Marko. ------------------------------------------------------------------------ r6547 | marko | 2010-02-03 14:43:38 +0200 (Wed, 03 Feb 2010) | 14 lines branches/zip: Clean up CHECK TABLE error handling. (Issue #220) ha_innobase::change_active_index(): Clean up code formatting. ha_innobase::check(): Incorporate the code from row_check_table_for_mysql(). Report errors to the client connection instead of writing them to the error log. row_check_table_for_mysql(): Remove. row_check_index_for_mysql(): Renamed from row_scan_and_check_index(). Let the caller initialize prebuilt, and assume that the index is usable. rb://178 approved by Sunny Bains ------------------------------------------------------------------------ r6548 | marko | 2010-02-03 15:01:39 +0200 (Wed, 03 Feb 2010) | 11 lines branches/zip: buf_LRU_invalidate_tablespace(): Ensure that prev_bpage is not relocated when freeing a compressed block. This avoids the costly rescan of the LRU list. (Bug #35077, Issue #449) At most one buffer-fix will be active at a time, affecting two blocks: the buf_page_t and the compressed page frame. This should not block the memory defragmentation in buf0buddy.c too much. In fact, it may avoid unnecessary copying if also prev_bpage belongs to the tablespace that is being invalidated. rb://240 ------------------------------------------------------------------------ r6559 | marko | 2010-02-04 13:21:18 +0200 (Thu, 04 Feb 2010) | 14 lines branches/zip: Pass the file name and line number of the caller of the b-tree cursor functions to the buffer pool requests, in order to make the latch diagnostics more accurate. buf_page_optimistic_get_func(): Renamed to buf_page_optimistic_get(). btr_page_get_father_node_ptr(), btr_insert_on_non_leaf_level(), btr_pcur_open(), btr_pcur_open_with_no_init(), btr_pcur_open_on_user_rec(), btr_pcur_open_at_rnd_pos(), btr_pcur_restore_position(), btr_cur_open_at_index_side(), btr_cur_open_at_rnd_pos(): Rename the function to _func and add the parameters file, line. Define wrapper macros with __FILE__, __LINE__. btr_cur_search_to_nth_level(): Add the parameters file, line. ------------------------------------------------------------------------ r6560 | sunny | 2010-02-04 16:11:23 +0200 (Thu, 04 Feb 2010) | 7 lines branches/zip: Remove the additional check introduced in r6534 which tries to check if the joining transaction has any other transactions waiting on its locks. This optimization results in excessive deadlocks when running Sysbench with a large number of threads. The function seems to return FALSE positives. rb://250 ------------------------------------------------------------------------	2010-02-04 14:29:14 +00:00
marko	67cd330256	branches/innodb+: Merge revisions 6130:6364 from branches/zip: ... ------------------------------------------------------------------------ r6130 | marko | 2009-11-02 11:42:56 +0200 (Mon, 02 Nov 2009) | 9 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/btr/btr0sea.c M /branches/zip/buf/buf0buf.c M /branches/zip/dict/dict0dict.c M /branches/zip/fil/fil0fil.c M /branches/zip/ibuf/ibuf0ibuf.c M /branches/zip/include/btr0sea.h M /branches/zip/include/dict0dict.h M /branches/zip/include/fil0fil.h M /branches/zip/include/ibuf0ibuf.h M /branches/zip/include/lock0lock.h M /branches/zip/include/log0log.h M /branches/zip/include/log0recv.h M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0pool.h M /branches/zip/include/os0file.h M /branches/zip/include/pars0pars.h M /branches/zip/include/srv0srv.h M /branches/zip/include/thr0loc.h M /branches/zip/include/trx0i_s.h M /branches/zip/include/trx0purge.h M /branches/zip/include/trx0rseg.h M /branches/zip/include/trx0sys.h M /branches/zip/include/trx0undo.h M /branches/zip/include/usr0sess.h M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/log/log0recv.c M /branches/zip/mem/mem0dbg.c M /branches/zip/mem/mem0pool.c M /branches/zip/os/os0file.c M /branches/zip/os/os0sync.c M /branches/zip/os/os0thread.c M /branches/zip/pars/lexyy.c M /branches/zip/pars/pars0lex.l M /branches/zip/que/que0que.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c M /branches/zip/sync/sync0arr.c M /branches/zip/sync/sync0sync.c M /branches/zip/thr/thr0loc.c M /branches/zip/trx/trx0i_s.c M /branches/zip/trx/trx0purge.c M /branches/zip/trx/trx0rseg.c M /branches/zip/trx/trx0sys.c M /branches/zip/trx/trx0undo.c M /branches/zip/usr/usr0sess.c M /branches/zip/ut/ut0mem.c branches/zip: Free all resources at shutdown. Set pointers to NULL, so that Valgrind will not complain about freed data structures that are reachable via pointers. This addresses Bug #45992 and Bug #46656. This patch is mostly based on changes copied from branches/embedded-1.0, mainly c5432, c3439, c3134, c2994, c2978, but also some other code was copied. Some added cleanup code is specific to MySQL/InnoDB. rb://199 approved by Sunny Bains ------------------------------------------------------------------------ r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc branches/zip: innobase_convert_identifier(): Convert table names with explain_filename() to address Bug #32430: 'show innodb status' causes errors Invalid (old?) table or database name in logs. rb://134 approved by Sunny Bains ------------------------------------------------------------------------ r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_index_too_big_for_undo(): Correct a typo. ------------------------------------------------------------------------ r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Merge r6125:6152 from branches/5.1: (everything except the last white-space change was skipped as it is already in branches/zip) ------------------------------------------------------------------------ r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines Changed paths: M /branches/5.1/Makefile.am M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Backport c6121 from branches/zip: ------------------------------------------------------------------------ r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines Changed paths: M /branches/zip/mysql-test/innodb-autoinc.result branches/zip: This test has been problematic for sometime now. The underlying bug is that the data dictionaries get out of sync. In the AUTOINC code we try and apply salve to the symptoms. In the past MySQL made some unrelated change and the dictionaries stopped getting out of sync and this test started to fail. Now, it seems they have reverted that changed and the test is passing again. I suspect this is not he last time that this test will change. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Revert a change to Makefile.am that sneaked unnoticed in c6127. ------------------------------------------------------------------------ r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/ha_prototypes.h M /branches/5.1/ut/ut0ut.c branches/5.1: Port r6134 from branches/zip: ------------------------------------------------------------------------ r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines branches/zip: innobase_convert_identifier(): Convert table names with explain_filename() to address Bug #32430: 'show innodb status' causes errors Invalid (old?) table or database name in logs. rb://134 approved by Sunny Bains ------------------------------------------------------------------------ innobase_print_identifier(): Replace with innobase_convert_name(). innobase_convert_identifier(): New function, called by innobase_convert_name(). ------------------------------------------------------------------------ r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines Changed paths: M /branches/5.1/CMakeLists.txt branches/5.1: Followup to r5700: Adjust the changes so they are the same as in the BZR repository. ------------------------------------------------------------------------ r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a part of r2911.5.5 from MySQL: (the other part of this was merged in c5700) ------------------------------------------------------------ revno: 2911.5.5 committer: Vladislav Vaintroub <vvaintroub@mysql.com> branch nick: 5.1-innodb_plugin timestamp: Wed 2009-06-10 10:59:49 +0200 message: Backport WL#3653 to 5.1 to enable bundled innodb plugin. Remove custom DLL loader code from innodb plugin code, use symbols exported from mysqld. removed: storage/innodb_plugin/handler/handler0vars.h storage/innodb_plugin/handler/win_delay_loader.cc added: storage/mysql_storage_engine.cmake win/create_def_file.js modified: CMakeLists.txt include/m_ctype.h include/my_global.h include/my_sys.h include/mysql/plugin.h libmysqld/CMakeLists.txt mysql-test/mysql-test-run.pl mysql-test/t/plugin.test mysql-test/t/plugin_load-master.opt mysys/charset.c sql/CMakeLists.txt sql/handler.h sql/mysql_priv.h sql/mysqld.cc sql/sql_class.cc sql/sql_class.h sql/sql_list.h sql/sql_profile.h storage/Makefile.am storage/archive/CMakeLists.txt storage/blackhole/CMakeLists.txt storage/csv/CMakeLists.txt storage/example/CMakeLists.txt storage/federated/CMakeLists.txt storage/heap/CMakeLists.txt storage/innobase/CMakeLists.txt storage/innobase/handler/ha_innodb.cc storage/innodb_plugin/CMakeLists.txt storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/handler0alter.cc storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/plug.in storage/myisam/CMakeLists.txt storage/myisammrg/CMakeLists.txt win/Makefile.am win/configure.js ------------------------------------------------------------------------ r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: White space fixup. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines Changed paths: M /branches/zip/handler/ha_innodb.cc A /branches/zip/mysql-test/innodb_bug47167.result A /branches/zip/mysql-test/innodb_bug47167.test M /branches/zip/mysql-test/innodb_file_format.result branches/zip: Fix an issue that a local variable defined in innodb_file_format_check_validate() is being referenced across function in innodb_file_format_check_update(). In addition, fix "set global innodb_file_format_check = DEFAULT" call. Bug #47167: "set global innodb_file_format_check" cannot set value by User-Defined Variable." rb://169 approved by Sunny Bains and Marko. ------------------------------------------------------------------------ r6159 | vasil | 2009-11-11 15:13:01 +0200 (Wed, 11 Nov 2009) | 37 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h branches/zip: Merge a change from MySQL: (this has been reviewed by Calvin and Marko, and Calvin says Luis has incorporated Marko's suggestions) ------------------------------------------------------------ revno: 3092.5.1 committer: Luis Soares <luis.soares@sun.com> branch nick: mysql-5.1-bugteam timestamp: Thu 2009-09-24 15:52:52 +0100 message: BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db InnoDB will return an error if statement based replication is used along with transaction isolation level READ-COMMITTED (or weaker), even if the statement in question is filtered out according to the binlog-do-db rules set. In this case, an error should not be printed. This patch addresses this issue by extending the existing check in external_lock to take into account the filter rules before deciding to print an error. Furthermore, it also changes decide_logging_format to take into consideration whether the statement is filtered out from binlog before decision is made. added: mysql-test/suite/binlog/r/binlog_stm_do_db.result mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt mysql-test/suite/binlog/t/binlog_stm_do_db.test modified: sql/sql_base.cc sql/sql_class.cc storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/ha_innodb.h ------------------------------------------------------------------------ r6160 | vasil | 2009-11-11 15:33:49 +0200 (Wed, 11 Nov 2009) | 72 lines Changed paths: M /branches/zip/include/os0file.h M /branches/zip/os/os0file.c branches/zip: Merge r6152:6159 from branches/5.1: (r6158 was skipped as an equivallent change has already been merged from MySQL) ------------------------------------------------------------------------ r6154 | calvin | 2009-11-11 02:51:17 +0200 (Wed, 11 Nov 2009) | 17 lines Changed paths: M /branches/5.1/include/os0file.h M /branches/5.1/os/os0file.c branches/5.1: fix bug#3139: Mysql crashes: 'windows error 995' after several selects on a large DB During stress environment, Windows AIO may fail with error code ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather crashes. The cause of the error is unknown, but likely due to faulty hardware or driver. This patch introduces a new error code OS_FILE_OPERATION_ABORTED, which maps to Windows ERROR_OPERATION_ABORTED (995). When the error is detected during AIO, the InnoDB will issue a synchronous retry (read/write). This patch has been extensively tested by MySQL support. Approved by: Marko rb://196 ------------------------------------------------------------------------ r6158 | vasil | 2009-11-11 14:52:14 +0200 (Wed, 11 Nov 2009) | 37 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/handler/ha_innodb.h branches/5.1: Merge a change from MySQL: (this has been reviewed by Calvin and Marko, and Calvin says Luis has incorporated Marko's suggestions) ------------------------------------------------------------ revno: 3092.5.1 committer: Luis Soares <luis.soares@sun.com> branch nick: mysql-5.1-bugteam timestamp: Thu 2009-09-24 15:52:52 +0100 message: BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db InnoDB will return an error if statement based replication is used along with transaction isolation level READ-COMMITTED (or weaker), even if the statement in question is filtered out according to the binlog-do-db rules set. In this case, an error should not be printed. This patch addresses this issue by extending the existing check in external_lock to take into account the filter rules before deciding to print an error. Furthermore, it also changes decide_logging_format to take into consideration whether the statement is filtered out from binlog before decision is made. added: mysql-test/suite/binlog/r/binlog_stm_do_db.result mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt mysql-test/suite/binlog/t/binlog_stm_do_db.test modified: sql/sql_base.cc sql/sql_class.cc storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/ha_innodb.h ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6161 | vasil | 2009-11-11 15:36:16 +0200 (Wed, 11 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add changelog entry for r6160. ------------------------------------------------------------------------ r6162 | vasil | 2009-11-11 16:00:12 +0200 (Wed, 11 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog for r6157. ------------------------------------------------------------------------ r6163 | calvin | 2009-11-11 17:53:20 +0200 (Wed, 11 Nov 2009) | 8 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h branches/zip: Exclude thd_binlog_filter_ok() when building with older version of MySQL. thd_binlog_filter_ok() is introduced in MySQL 5.1.41. But the plugin can be built with MySQL prior to 5.1.41. Approved by Heikki (on IM). ------------------------------------------------------------------------ r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines Changed paths: A /branches/zip/mysql-test/innodb_bug46676.result A /branches/zip/mysql-test/innodb_bug46676.test branches/zip: add test case for bug#46676 This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37. But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5). Add test case to catch future regression. ------------------------------------------------------------------------ r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/db0err.h M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c branches/zip: Allow CREATE INDEX to be interrupted. (Issue #354) rb://183 approved by Heikki Tuuri ------------------------------------------------------------------------ r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Wrap line at 78th char in the ChangeLog ------------------------------------------------------------------------ r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines Changed paths: M /branches/zip/ChangeLog branches/zip: add an entry to ChangeLog for r6065 ------------------------------------------------------------------------ r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: ha_innobase::change_active_index(): When the history is missing, report it to the client, not to the error log. ------------------------------------------------------------------------ r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines Changed paths: M /branches/zip/mysql-test/innodb-index.test branches/zip: At the end of innodb-index.test: restore the environment as it was before the test was started to silence this warning: MTR's internal check of the test case 'main.innodb-index' failed. This means that the test case does not preserve the state that existed before the test case was executed. Most likely the test case did not do a proper clean-up. This is the diff of the states of the servers before and after the test case was executed: mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'. mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'. mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ... mysqltest: ... Connected. mysqltest: Start processing test commands from './include/check-testcase.test' ... mysqltest: ... Done processing test commands. --- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-11-17 13:10:40.000000000 +0300 +++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-11-17 13:10:54.000000000 +0300 @@ -84,7 +84,7 @@ INNODB_DOUBLEWRITE ON INNODB_FAST_SHUTDOWN 1 INNODB_FILE_FORMAT Antelope -INNODB_FILE_FORMAT_CHECK Antelope +INNODB_FILE_FORMAT_CHECK Barracuda INNODB_FILE_PER_TABLE OFF INNODB_FLUSH_LOG_AT_TRX_COMMIT 1 INNODB_FLUSH_METHOD mysqltest: Result content mismatch not ok ------------------------------------------------------------------------ r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-consistent-master.opt M /branches/zip/mysql-test/innodb-consistent.result M /branches/zip/mysql-test/innodb-consistent.test M /branches/zip/mysql-test/innodb-use-sys-malloc-master.opt M /branches/zip/mysql-test/innodb-use-sys-malloc.result M /branches/zip/mysql-test/innodb-use-sys-malloc.test M /branches/zip/mysql-test/innodb_bug21704.result M /branches/zip/mysql-test/innodb_bug21704.test M /branches/zip/mysql-test/innodb_bug40360.test M /branches/zip/mysql-test/innodb_bug40565.result M /branches/zip/mysql-test/innodb_bug40565.test M /branches/zip/mysql-test/innodb_bug41904.result M /branches/zip/mysql-test/innodb_bug41904.test M /branches/zip/mysql-test/innodb_bug42101-nonzero-master.opt M /branches/zip/mysql-test/innodb_bug42101-nonzero.result M /branches/zip/mysql-test/innodb_bug42101-nonzero.test M /branches/zip/mysql-test/innodb_bug42101.result M /branches/zip/mysql-test/innodb_bug42101.test M /branches/zip/mysql-test/innodb_bug44032.result M /branches/zip/mysql-test/innodb_bug44032.test M /branches/zip/mysql-test/innodb_bug44369.result M /branches/zip/mysql-test/innodb_bug44369.test M /branches/zip/mysql-test/innodb_bug44571.result M /branches/zip/mysql-test/innodb_bug44571.test M /branches/zip/mysql-test/innodb_bug45357.test M /branches/zip/mysql-test/innodb_bug46000.result M /branches/zip/mysql-test/innodb_bug46000.test M /branches/zip/mysql-test/innodb_bug46676.result M /branches/zip/mysql-test/innodb_bug46676.test M /branches/zip/mysql-test/innodb_bug47167.result M /branches/zip/mysql-test/innodb_bug47167.test M /branches/zip/mysql-test/innodb_bug47777.result M /branches/zip/mysql-test/innodb_bug47777.test M /branches/zip/mysql-test/innodb_file_format.result M /branches/zip/mysql-test/innodb_file_format.test branches/zip: Set svn:eol-style on mysql-test files. ------------------------------------------------------------------------ r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-consistent-master.opt M /branches/zip/mysql-test/innodb-master.opt M /branches/zip/mysql-test/innodb-semi-consistent-master.opt M /branches/zip/mysql-test/innodb-use-sys-malloc-master.opt M /branches/zip/mysql-test/innodb_bug42101-nonzero-master.opt branches/zip: Prepend loose_ to plugin-only mysql-test options. ------------------------------------------------------------------------ r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-index.result M /branches/zip/mysql-test/innodb-index.test branches/zip: innodb-index.test: Restore innodb_file_format_check. ------------------------------------------------------------------------ r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/mysql-test/innodb.result M /branches/zip/mysql-test/innodb.test M /branches/zip/mysql-test/innodb_bug44369.result M /branches/zip/mysql-test/innodb_bug44369.test D /branches/zip/mysql-test/patches/innodb-index.diff M /branches/zip/row/row0mysql.c branches/zip: Report duplicate table names to the client connection, not to the error log. This change will allow innodb-index.test to be re-enabled. It was previously disabled, because mysql-test-run does not like output in the error log. row_create_table_for_mysql(): Do not output anything to the error log when reporting DB_DUPLICATE_KEY. Let the caller report the error. Add a TODO comment that the dict_table_t object is apparently not freed when an error occurs. create_table_def(): Convert InnoDB table names to the character set of the client connection for reporting. Use my_error(ER_WRONG_COLUMN_NAME) for reporting reserved column names. Report my_error(ER_TABLE_EXISTS_ERROR) when row_create_table_for_mysql() returns DB_DUPLICATE_KEY. rb://206 ------------------------------------------------------------------------ r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for r6185. ------------------------------------------------------------------------ r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): When creating the primary key and the table is being locked by another transaction, do not attempt to drop the table. (Bug #48782) Approved by Sunny Bains over IM ------------------------------------------------------------------------ r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines Changed paths: M /branches/zip/include/univ.i branches/zip: Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released by MySQL and we will soon release 1.0.6. ------------------------------------------------------------------------ r6197 | calvin | 2009-11-19 09:32:55 +0200 (Thu, 19 Nov 2009) | 6 lines Changed paths: M /branches/zip/CMakeLists.txt branches/zip: merge the fix of bug#48317 (CMake file) Due to MySQL changes to the CMake, it is no longer able to build InnoDB plugin as a static library on Windows. The fix is proposed by Vlad of MySQL. ------------------------------------------------------------------------ r6198 | vasil | 2009-11-19 09:44:31 +0200 (Thu, 19 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for r6197. ------------------------------------------------------------------------ r6199 | vasil | 2009-11-19 12:10:12 +0200 (Thu, 19 Nov 2009) | 31 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/btr/btr0btr.c M /branches/zip/data/data0type.c branches/zip: Merge r6159:6198 from branches/5.1: ------------------------------------------------------------------------ r6187 | jyang | 2009-11-18 05:27:30 +0200 (Wed, 18 Nov 2009) | 9 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: Fix bug #48469 "when innodb tablespace is configured too small, crash and corruption!". Function btr_create() did not check the return status of fseg_create(), and continue the index creation even there is no sufficient space. rb://205 Approved by Marko ------------------------------------------------------------------------ r6188 | jyang | 2009-11-18 07:14:23 +0200 (Wed, 18 Nov 2009) | 8 lines Changed paths: M /branches/5.1/data/data0type.c branches/5.1: Fix bug #48526 "Data type for float and double is incorrectly reported in InnoDB table monitor". Certain datatypes are not printed correctly in dtype_print(). rb://204 Approved by Marko. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6201 | marko | 2009-11-19 14:09:11 +0200 (Thu, 19 Nov 2009) | 2 lines Changed paths: M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): Clarify the comment on orphaned tables when creating a primary key. ------------------------------------------------------------------------ r6202 | jyang | 2009-11-19 15:01:00 +0200 (Thu, 19 Nov 2009) | 8 lines Changed paths: M /branches/zip/btr/btr0btr.c branches/zip: Function fseg_free() is no longer defined in branches/zip. To port fix for bug #48469 to zip, we can use btr_free_root() which frees the page, and also does not require mini-transaction. Approved by Marko. ------------------------------------------------------------------------ r6207 | vasil | 2009-11-20 10:19:14 +0200 (Fri, 20 Nov 2009) | 54 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Merge r6198:6206 from branches/5.1: (r6203 was skipped as it is already in branches/zip) ------------------------------------------------------------------------ r6200 | vasil | 2009-11-19 12:14:23 +0200 (Thu, 19 Nov 2009) | 4 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: White space fixup - indent under the opening ( ------------------------------------------------------------------------ r6203 | jyang | 2009-11-19 15:12:22 +0200 (Thu, 19 Nov 2009) | 8 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: Use btr_free_root() instead of fseg_free() for the fix of bug #48469, because fseg_free() is not defined in the zip branch. And we could save one mini-trasaction started by fseg_free(). Approved by Marko. ------------------------------------------------------------------------ r6205 | jyang | 2009-11-20 07:55:48 +0200 (Fri, 20 Nov 2009) | 11 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Add a special case to handle the Duplicated Key error and return DB_ERROR instead. This is to avoid a possible SIGSEGV by mysql error handling re-entering the storage layer for dup key info without proper table handle. This is to prevent a server crash when error situation in bug #45961 "DDL on partitioned innodb tables leaves data dictionary in an inconsistent state" happens. rb://157 approved by Sunny Bains. ------------------------------------------------------------------------ r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a minor code formating issue for the parenthesis iplacement of the if condition in rename_table(). ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6208 | vasil | 2009-11-20 10:49:24 +0200 (Fri, 20 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for c6207. ------------------------------------------------------------------------ r6210 | vasil | 2009-11-20 23:39:48 +0200 (Fri, 20 Nov 2009) | 3 lines Changed paths: M /branches/zip/trx/trx0i_s.c branches/zip: Whitespace fixup. ------------------------------------------------------------------------ r6248 | marko | 2009-11-30 12:19:50 +0200 (Mon, 30 Nov 2009) | 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: ChangeLog: Document r4922 that was forgotten. ------------------------------------------------------------------------ r6252 | marko | 2009-11-30 12:50:11 +0200 (Mon, 30 Nov 2009) | 23 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/dict/dict0boot.c M /branches/zip/dict/dict0crea.c M /branches/zip/dict/dict0load.c M /branches/zip/dict/dict0mem.c M /branches/zip/fil/fil0fil.c M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/dict0mem.h M /branches/zip/row/row0mysql.c branches/zip: Suppress errors about non-found temporary tables. Write the is_temp flag to SYS_TABLES.MIX_LEN. dict_table_t:🎏 Add a flag for is_temporary, DICT_TF2_TEMPORARY. Unlike other flags, this will not be written to the tablespace flags or SYS_TABLES.TYPE, but only to SYS_TABLES.MIX_LEN. dict_build_table_def_step(): Only pass DICT_TF_BITS to tablespaces. dict_check_tablespaces_and_store_max_id(), dict_load_table(): Suppress errors about temporary tables not being found. dict_create_sys_tables_tuple(): Write the DICT_TF2_TEMPORARY flag to SYS_TABLES.MIX_LEN. fil_space_create(), fil_create_new_single_table_tablespace(): Add assertions about space->flags. row_drop_table_for_mysql(): Do not complain about non-found temporary tables. rb://160 approved by Heikki Tuuri. This addresses the second part of Bug #41609 Crash recovery does not work for InnoDB temporary tables. ------------------------------------------------------------------------ r6263 | vasil | 2009-12-01 14:49:05 +0200 (Tue, 01 Dec 2009) | 4 lines Changed paths: M /branches/zip/include/univ.i branches/zip: Increment version number from 1.0.6 to 1.0.7 1.0.6 has been released ------------------------------------------------------------------------ r6264 | vasil | 2009-12-01 16:19:44 +0200 (Tue, 01 Dec 2009) | 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for the release of 1.0.6. ------------------------------------------------------------------------ r6269 | marko | 2009-12-02 11:35:22 +0200 (Wed, 02 Dec 2009) | 2 lines Changed paths: M /branches/zip/srv/srv0start.c branches/zip: innobase_start_or_create_for_mysql(): UNIV_IBUF_DEBUG should not break crash recovery, but UNIV_IBUF_COUNT_DEBUG will. ------------------------------------------------------------------------ r6270 | marko | 2009-12-02 11:36:47 +0200 (Wed, 02 Dec 2009) | 1 line Changed paths: M /branches/zip/srv/srv0start.c branches/zip: innobase_start_or_create_for_mysql(): Log the zlib version. ------------------------------------------------------------------------ r6271 | marko | 2009-12-02 11:43:49 +0200 (Wed, 02 Dec 2009) | 2 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/Makefile.am M /branches/zip/include/univ.i M /branches/zip/plug.in branches/zip: ChangeLog: Document that since r6270, the zlib version number will be displayed at start-up. ------------------------------------------------------------------------ r6272 | marko | 2009-12-02 11:46:05 +0200 (Wed, 02 Dec 2009) | 1 line Changed paths: M /branches/zip/Makefile.am M /branches/zip/include/univ.i M /branches/zip/plug.in branches/zip: Revert changes that were accidentally committed in r6271. ------------------------------------------------------------------------ r6274 | marko | 2009-12-03 14:47:12 +0200 (Thu, 03 Dec 2009) | 6 lines Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_table_check_for_dup_indexes(): Assert that the data dictionary mutex is being held while table->indexes is accessed. This is already the case. Currently, only dict_table_get_next_index() and dict_table_get_first_index() are being invoked without holding dict_sys->mutex. ------------------------------------------------------------------------ r6275 | pekka | 2009-12-03 18:32:47 +0200 (Thu, 03 Dec 2009) | 10 lines Changed paths: M /branches/zip/include/log0recv.h M /branches/zip/include/trx0sys.h M /branches/zip/log/log0recv.c M /branches/zip/trx/trx0sys.c branches/zip: Minor changes which allow build with UNIV_HOTBACKUP defined to succeed: include/trx0sys.h: Allow Hot Backup build to see some TRX_SYS_DOUBLEWRITE_... macros. trx/trx0sys.c: Exclude trx_sys_close() function from Hot Backup build. log/log0recv.[ch]: Exclude recv_sys_var_init() function from Hot Backup build. This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r6277 | marko | 2009-12-08 11:13:36 +0200 (Tue, 08 Dec 2009) | 1 line Changed paths: M /branches/zip/fsp/fsp0fsp.c branches/zip: fsp0fsp.c: Add some missing in/out and const qualifiers. ------------------------------------------------------------------------ r6285 | marko | 2009-12-09 09:24:50 +0200 (Wed, 09 Dec 2009) | 13 lines Changed paths: M /branches/zip/row/row0sel.c branches/zip: row_sel_fetch_columns(): Remove redundant code that was accidentally added in r1591, which introduced dfield_t::ext in order to make the merge sort of fast index creation support externally stored columns, Initially, I tried to allocate the bit for dfield_t::ext from dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL to something that would fit in it. Then I decided that it would be too risky. The redundant check was part of the mapping. The condition may have been dfield_is_null() initially. This redundant code was noticed by Sergey Petrunya on the MySQL internals list. ------------------------------------------------------------------------ r6288 | marko | 2009-12-09 09:51:00 +0200 (Wed, 09 Dec 2009) | 15 lines Changed paths: M /branches/zip/row/row0upd.c branches/zip: row_upd_copy_columns(): Remove redundant code that was accidentally added in r1591, which introduced dfield_t::ext in order to make the merge sort of fast index creation support externally stored columns. Initially, I tried to allocate the bit for dfield_t::ext from dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL to something that would fit in it. Then I decided that it would be too risky. The redundant check was part of the mapping. The condition may have been dfield_is_null() initially. This is similar to the redundant code in row_sel_fetch_columns() that was noticed by Sergey Petrunya on the MySQL internals list and removed in r6285. As far as I can tell, there are no redundant UNIV_SQL_NULL assignments remaining after this change. ------------------------------------------------------------------------ r6305 | marko | 2009-12-14 13:03:57 +0200 (Mon, 14 Dec 2009) | 2 lines Changed paths: M /branches/zip/row/row0umod.c branches/zip: row_undo_mod_del_unmark_sec_and_undo_update(): Add a missing const qualifier. ------------------------------------------------------------------------ r6309 | marko | 2009-12-15 14:05:50 +0200 (Tue, 15 Dec 2009) | 3 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: lock_rec_insert_check_and_lock(): Avoid casting away constness. Use page_rec_get_next_const() instead. This silences a gcc 4.2.4 warning. Reported by Sunny Bains. ------------------------------------------------------------------------ r6312 | marko | 2009-12-16 10:10:36 +0200 (Wed, 16 Dec 2009) | 6 lines Changed paths: M /branches/zip/fil/fil0fil.c branches/zip: fil_close(): Add #ifndef UNIV_HOTBACKUP around a debug assertion on mutex.magic_n. InnoDB Hot Backup is a single-threaded program and does not contain mutexes. This change allows InnoDB Hot Backup to be compiled with UNIV_DEBUG. Suggested by Michael Izioumtchenko. ------------------------------------------------------------------------ r6321 | marko | 2009-12-16 16:16:33 +0200 (Wed, 16 Dec 2009) | 4 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: row_merge_drop_temp_indexes(): Revert a hack to transaction isolation level that was made unnecessary by r5826 (Issue #337). When this function is called, any active data dictionary transaction should have been rolled back. ------------------------------------------------------------------------ r6345 | marko | 2009-12-21 10:46:14 +0200 (Mon, 21 Dec 2009) | 7 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_scan_log_recs(): Non-functional change: Replace a debug assertion ut_ad(len > 0) with ut_ad(len >= OS_FILE_LOG_BLOCK_SIZE). This change is only for readability, for Issue #428. Another assertion on len being an integer multiple of OS_FILE_LOG_BLOCK_SIZE already ensured together with the old ut_ad(len > 0) that actually len must be at least OS_FILE_LOG_BLOCK_SIZE. ------------------------------------------------------------------------ r6346 | marko | 2009-12-21 12:03:25 +0200 (Mon, 21 Dec 2009) | 2 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_recovery_from_checkpoint_finish(): Revert a change that was accidentally committed in r6345. ------------------------------------------------------------------------ r6348 | marko | 2009-12-22 11:04:34 +0200 (Tue, 22 Dec 2009) | 37 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/ha_prototypes.h M /branches/zip/include/trx0trx.h M /branches/zip/lock/lock0lock.c M /branches/zip/trx/trx0i_s.c M /branches/zip/trx/trx0trx.c branches/zip: Merge a change from MySQL: ------------------------------------------------------------ revno: 3236 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-12-01 17:48:57 +0530 message: merge to mysql-5.1-bugteam ------------------------------------------------------------ revno: 3234.1.1 committer: Gleb Shchepa <gshchepa@mysql.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-12-01 14:38:40 +0400 message: Bug #38883 (reopened): thd_security_context is not thread safe, crashes? manual merge 5.0-->5.1, updating InnoDB plugin. ------------------------------------------------------------ revno: 1810.3968.13 committer: Gleb Shchepa <gshchepa@mysql.com> branch nick: mysql-5.0-bugteam timestamp: Tue 2009-12-01 14:24:44 +0400 message: Bug #38883 (reopened): thd_security_context is not thread safe, crashes? The bug 38816 changed the lock that protects THD::query from LOCK_thread_count to LOCK_thd_data, but didn't update the associated InnoDB functions. 1. The innobase_mysql_prepare_print_arbitrary_thd and the innobase_mysql_end_print_arbitrary_thd InnoDB functions have been removed, since now we have a per-thread mutex: now we don't need to wrap several inter-thread access tries to THD::query with a single global LOCK_thread_count lock, so we can simplify the code. 2. The innobase_mysql_print_thd function has been modified to lock LOCK_thd_data in direct way. ------------------------------------------------------------------------ r6351 | marko | 2009-12-22 11:11:18 +0200 (Tue, 22 Dec 2009) | 1 line Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Remove an obsolete declaration of LOCK_thread_count. ------------------------------------------------------------------------ r6352 | marko | 2009-12-22 12:33:01 +0200 (Tue, 22 Dec 2009) | 104 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/lock0lock.h M /branches/zip/include/srv0srv.h M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/mysql-test/innodb-autoinc.result M /branches/zip/mysql-test/innodb-autoinc.test M /branches/zip/row/row0sel.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c branches/zip: Merge revisions 6206:6350 from branches/5.1, except r6347, r6349, r6350 which were committed separately to both branches, and r6310, which was backported from zip to 5.1. ------------------------------------------------------------------------ r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Non-functional change, fix formatting. ------------------------------------------------------------------------ r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result branches/5.1: Fix autoinc failing test results. (this should be skipped when merging 5.1 into zip) ------------------------------------------------------------------------ r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test M /branches/5.1/row/row0sel.c branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine. We use the appropriate function to read the column value for non-integer autoinc column types, namely float and double. rb://208. Approved by Marko. ------------------------------------------------------------------------ r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix white space errors. ------------------------------------------------------------------------ r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/include/mach0data.h M /branches/5.1/include/mach0data.ic M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix tests and make read float/double arg const. ------------------------------------------------------------------------ r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix whitepsace issues. ------------------------------------------------------------------------ r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values. This bug is similiar to the negative autoinc filter patch from earlier, with the additional handling of filtering out the negative column values set explicitly by the user. rb://184 Approved by Heikki. ------------------------------------------------------------------------ r6242 | vasil | 2009-11-27 22:07:12 +0200 (Fri, 27 Nov 2009) | 4 lines Changed paths: M /branches/5.1/export.sh branches/5.1: Minor changes to support plugin snapshots. ------------------------------------------------------------------------ r6306 | calvin | 2009-12-14 15:12:46 +0200 (Mon, 14 Dec 2009) | 5 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: fix bug#49267: innodb-autoinc.test fails on windows because of different case mode There is no change to the InnoDB code, only to fix test case by changing "T1" to "t1". ------------------------------------------------------------------------ r6324 | jyang | 2009-12-17 06:54:24 +0200 (Thu, 17 Dec 2009) | 8 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/lock0lock.h M /branches/5.1/include/srv0srv.h M /branches/5.1/lock/lock0lock.c M /branches/5.1/log/log0log.c M /branches/5.1/srv/srv0srv.c M /branches/5.1/srv/srv0start.c branches/5.1: Fix bug #47814 - Diagnostics are frequently not printed after a long lock wait in InnoDB. Separate out the lock wait timeout check thread from monitor information printing thread. rb://200 Approved by Marko. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6364 | marko | 2009-12-26 21:06:31 +0200 (Sat, 26 Dec 2009) | 4 lines Changed paths: M /branches/zip/ibuf/ibuf0ibuf.c branches/zip: ibuf_bitmap_get_map_page(): Define a wrapper macro that passes __FILE__, __LINE__ of the caller to buf_page_get_gen(). This will ease the diagnosis of the likes of Issue #135. ------------------------------------------------------------------------	2009-12-26 19:17:43 +00:00
inaam	95b46843b7	branches/innodb+: Merged revisions 5525:5971 from branches/zip ... ------------------------------------------------------------------------ r5971 | marko | 2009-09-23 09:03:51 -0400 (Wed, 23 Sep 2009) | 2 lines branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup when the pwrite system call is not available. ------------------------------------------------------------------------ r5956 | calvin | 2009-09-22 19:30:10 -0400 (Tue, 22 Sep 2009) | 4 lines branches/zip: remove handler0vars.h from Makefile.am Left over from r5950. ------------------------------------------------------------------------ r5951 | calvin | 2009-09-22 11:17:01 -0400 (Tue, 22 Sep 2009) | 4 lines branches/zip: adjust CMake file to work with old versions of MySQL Tested with MySQL 5.1.38 and 5.1.30. ------------------------------------------------------------------------ r5950 | calvin | 2009-09-22 02:42:46 -0400 (Tue, 22 Sep 2009) | 17 lines branches/zip: adjust Windows loading method for 5.1.38 Starting at 5.1.38, MySQL server exports symbols needed for dynamic plugin on Windows. There is no need for Windows specific loading. Also, the CMake files are simplified in 5.1.38. When WITH_INNOBASE_STORAGE_ENGINE is specified during configuration (win\configure.js), InnoDB is built as a static library. Otherwise, a dynamic InnoDB will be built (ha_innodb.dll). CMakeLists.txt requires minor changes in order to work with MySQL prior to 5.1.38. The changes will be in a separate patch. This patch addresses Mantis issue#286. ------------------------------------------------------------------------ r5945 | calvin | 2009-09-21 10:53:22 -0400 (Mon, 21 Sep 2009) | 4 lines branches/zip: fix a type in r5935 Should be innodb_open_files, spotted by Michael. ------------------------------------------------------------------------ r5940 | vasil | 2009-09-21 01:26:04 -0400 (Mon, 21 Sep 2009) | 4 lines branches/zip: Add ChangeLog entries for c5938. ------------------------------------------------------------------------ r5938 | calvin | 2009-09-19 03:14:25 -0400 (Sat, 19 Sep 2009) | 41 lines branches/zip: Merge revisions 2584:2956 from branches/6.0, except c2932. Bug#37232 and bug#31183 were fixed in the 6.0 branch only. They should be fixed in the plugin too, specially MySQL 6.0 is discontinued at this point. ------------------------------------------------------------------------ r2604 | inaam | 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) | 8 lines branches/6.0 bug#37232 Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1. Now SELECT on t1 is performed as a consistent read when the isolation level is set to READ COMMITTED. Reviewed by: Heikki ------------------------------------------------------------------------ r2605 | inaam | 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) | 7 lines branches/6.0 Added a comment to clarify why distinct calls to read MySQL binary log file name and log position do not entail any race condition. Suggested by: Heikki ------------------------------------------------------------------------ r2956 | inaam | 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) | 11 lines branches/6.0 bug#31183 If the system tablespace runs out of space because 'autoextend' is not specified with innodb_data_file_path there was no error message printed to the error log. The client would get 'table full' error. This patch prints an appropriate error message to the error log. rb://43 Approved by: Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5935 | calvin | 2009-09-18 17:08:02 -0400 (Fri, 18 Sep 2009) | 6 lines branches/zip: fix bug#44338; minor non-functional changes Bug#44338 innodb has message about non-existing option innodb_max_files_open. Change the option to innodb_open_files. The fix was committed into 6.0 branch. ------------------------------------------------------------------------ r5934 | vasil | 2009-09-18 13:06:46 -0400 (Fri, 18 Sep 2009) | 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5924 | vasil | 2009-09-18 00:59:30 -0400 (Fri, 18 Sep 2009) | 4 lines branches/zip: White space and formatting cleanup in the ChangeLog ------------------------------------------------------------------------ r5922 | marko | 2009-09-17 02:32:08 -0400 (Thu, 17 Sep 2009) | 4 lines branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3. Apparently, the definition of compressBound() has slightly changed. This has been filed as Mantis Issue #345. ------------------------------------------------------------------------ r5920 | vasil | 2009-09-16 14:47:22 -0400 (Wed, 16 Sep 2009) | 4 lines branches/zip: Add ChangeLog entries for r5916. ------------------------------------------------------------------------ r5919 | vasil | 2009-09-16 14:37:13 -0400 (Wed, 16 Sep 2009) | 4 lines branches/zip: Whitespace cleanup in the ChangeLog. ------------------------------------------------------------------------ r5917 | marko | 2009-09-16 05:56:23 -0400 (Wed, 16 Sep 2009) | 1 line branches/zip: innobase_get_cset_width(): Cache the value of current_thd. ------------------------------------------------------------------------ r5916 | marko | 2009-09-16 05:54:43 -0400 (Wed, 16 Sep 2009) | 128 lines branches/zip: Merge revisions 5622:5912 from branches/5.1, except r5700 (changes to CMakeLists.txt) ------------------------------------------------------------------------ r5622 | vasil | 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) | 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ r5740 | jyang | 2009-09-03 06:33:47 +0300 (Thu, 03 Sep 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Sunny Bains. ------------------------------------------------------------------------ r5741 | jyang | 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) | 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5757 | jyang | 2009-09-04 04:26:13 +0300 (Fri, 04 Sep 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h D /branches/5.1/mysql-test/innodb_bug46000.result D /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Revert change in 5740. Making the fix in a subsequent check in. ------------------------------------------------------------------------ r5760 | jyang | 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) | 3 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc D /branches/5.1/mysql-test/innodb_bug44369.result D /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: This is to revert change 5741. A return status for create_table_def() needs to be fixed. ------------------------------------------------------------------------ r5797 | calvin | 2009-09-09 18:26:29 +0300 (Wed, 09 Sep 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: merge change from 5.1.38 HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. ------------------------------------------------------------------------ r5799 | calvin | 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: fix bug#46256 Allow tables to be dropped even if the collation is not found, but issue a warning. Could not find an easy way to add mysql-test since it requires changes to charsets and restarting the server. Tests were executed manually. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5805 | vasil | 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) | 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a compilation warning caused by c5799: handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint*, ulint*)': handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint' ------------------------------------------------------------------------ r5834 | jyang | 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) | 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5895 | jyang | 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Marko Makela. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5910 | marko | 2009-09-16 04:07:21 -0400 (Wed, 16 Sep 2009) | 9 lines branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil. ------------------------------------------------------------------------ r5899 | marko | 2009-09-15 07:26:01 -0400 (Tue, 15 Sep 2009) | 4 lines branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP. Since r5872, the InnoDB Hot Backup build was broken. Fix it by not defining any thread synchronization primitives in ut0ut.h. InnoDB Hot Backup is a single-threaded program. ------------------------------------------------------------------------ r5898 | marko | 2009-09-15 06:18:50 -0400 (Tue, 15 Sep 2009) | 2 lines branches/zip: Add */.dirstamp to svn:ignore, for https://svn.innodb.com/svn/hotbackup/branches/3.5 ------------------------------------------------------------------------ r5897 | marko | 2009-09-15 04:29:00 -0400 (Tue, 15 Sep 2009) | 8 lines branches/zip: Avoid bogus messages about latching order violations when UNIV_SYNC_DEBUG is defined. sync_thread_levels_g(): Add the parameter "warn". Do not print anything unless it is set. sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g() when the check is within an assertion; FALSE if it is not. ------------------------------------------------------------------------ r5893 | inaam | 2009-09-14 11:20:48 -0400 (Mon, 14 Sep 2009) | 10 lines branches/zip rb://159 In case of pages that are not made young the counter is incremented only when the page in question is 'old'. In case of pages that are made young the counter is incremented in case of all pages. For apple to apple comparison this patch changes the 'young-making' counter to consider only 'old' blocks. Approved by: Marko ------------------------------------------------------------------------ r5889 | vasil | 2009-09-14 05:17:18 -0400 (Mon, 14 Sep 2009) | 5 lines branches/zip: Add missing return statement in the test program that could have caused a warning. ------------------------------------------------------------------------ r5888 | vasil | 2009-09-14 04:38:45 -0400 (Mon, 14 Sep 2009) | 40 lines branches/zip: Back-merge c5880 and c5881 from branches/embedded-1.0: ------------------------------------------------------------------------ r5880 | vasil | 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) | 18 lines Changed paths: M /branches/embedded-1.0/configure.in M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/srv/srv0start.c branches/embedded-1.0: Clean up and simplify the code that surrounds the atomic ops: * Simplify the code that prints what atomics are used: Instead of repeating the same conditions on which each atomics are used use just one printf that prints a variable defined by the code which chooses what atomics to use. * In os0sync.h pick up each atomic variant only if it has been selected by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message to be printed. * In configure.in: check what user has chosen and if he has chosen something that is not available, emit an error. If nothing has been chosen explicitly by the user, auto select an option according to the described logic in configure.in. ------------------------------------------------------------------------ r5881 | vasil | 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) | 4 lines Changed paths: M /branches/embedded-1.0/configure.in branches/embedded-1.0: Fix syntax error in test program. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5875 | vasil | 2009-09-12 08:11:25 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Remove unnecessary macro. ------------------------------------------------------------------------ r5872 | vasil | 2009-09-12 05:35:17 -0400 (Sat, 12 Sep 2009) | 5 lines branches/zip: Explicitly include os0sync.h to the places where HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are used to avoid potential problems. ------------------------------------------------------------------------ r5871 | vasil | 2009-09-12 05:25:44 -0400 (Sat, 12 Sep 2009) | 6 lines branches/zip: Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they all follow the same HAVE_IB_* convention. ------------------------------------------------------------------------ r5870 | vasil | 2009-09-12 05:13:44 -0400 (Sat, 12 Sep 2009) | 7 lines branches/zip: Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h instead of in univ.i. The code expects os_*() macros to be present if HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define them next to defining the os_*() macros. ------------------------------------------------------------------------ r5869 | vasil | 2009-09-12 04:33:11 -0400 (Sat, 12 Sep 2009) | 15 lines branches/zip: Include ut0auxconf.h only if none of the macros it would define is defined. The check when to include this header was outdated from the time when there was only one macro involved. Move the atomics checks that are in univ.i outside of #if windows ... #else ... #endif This simplifies the code and removes some duplicates like defining HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches. Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events. Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS. ------------------------------------------------------------------------ r5868 | vasil | 2009-09-12 04:01:17 -0400 (Sat, 12 Sep 2009) | 6 lines branches/zip: Move the check whether to include ut0auxconf.h before everything because we are now even checking for GCC atomics, we relied on MySQL to define this macro before. ------------------------------------------------------------------------ r5867 | vasil | 2009-09-12 03:43:45 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Update comment to reflect reality. ------------------------------------------------------------------------ r5866 | vasil | 2009-09-12 03:30:08 -0400 (Sat, 12 Sep 2009) | 5 lines branches/zip: Add the check for GCC atomics to ut0auxconf* (copied from plug.in) because we no longer rely on MySQL's HAVE_GCC_ATOMIC_BUILTINS. ------------------------------------------------------------------------ r5865 | vasil | 2009-09-12 03:26:03 -0400 (Sat, 12 Sep 2009) | 10 lines branches/zip: Simplify the compile time checks by splittig them into 5 independent checks: * Whether GCC atomics are available * Whether pthread_t can be used by GCC atomics * Whether Solaris libc atomics are available * Whether pthread_t can be used by Solaris libs atomics * Checking the size of pthread_t ------------------------------------------------------------------------ r5864 | vasil | 2009-09-12 03:22:55 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Include string.h which is needed for memset(). ------------------------------------------------------------------------ r5863 | vasil | 2009-09-12 03:07:08 -0400 (Sat, 12 Sep 2009) | 10 lines branches/zip: Check that pthread_t can indeed be passed to Solaris atomic functions, instead of assuming that it can be passed if 0 can be assigned to it. It could be that: * 0 can be assigned, but pthread_t cannot be passed and * 0 cannot be assigned but pthread_t can be passed Better to check what we are interested in, not something else and make assumptions. ------------------------------------------------------------------------ r5858 | vasil | 2009-09-11 13:46:47 -0400 (Fri, 11 Sep 2009) | 4 lines branches/zip: Fix the indentation of the closing bracket. ------------------------------------------------------------------------ r5826 | marko | 2009-09-10 07:29:46 -0400 (Thu, 10 Sep 2009) | 12 lines branches/zip: Roll back recovered dictionary transactions before dropping incomplete indexes (Issue #337). trx_rollback_or_clean_recovered(ibool all): New function, split from trx_rollback_or_clean_all_recovered(). all==FALSE will only roll back dictionary transactions. recv_recovery_from_checkpoint_finish(): Call trx_rollback_or_clean_recovered(FALSE) before row_merge_drop_temp_indexes(). rb://158 approved by Sunny Bains ------------------------------------------------------------------------ r5825 | marko | 2009-09-10 06:47:09 -0400 (Thu, 10 Sep 2009) | 20 lines branches/zip: Reduce mutex contention that was introduced when addressing Bug #45015 (Issue #316), in r5703. buf_page_set_accessed_make_young(): New auxiliary function, called by buf_page_get_zip(), buf_page_get_gen(), buf_page_optimistic_get_func(). Call ut_time_ms() outside of buf_pool_mutex. Use cached access_time. buf_page_set_accessed(): Add the parameter time_ms, so that ut_time_ms() need not be called while holding buf_pool_mutex. buf_page_optimistic_get_func(), buf_page_get_known_nowait(): Read buf_page_t::access_time without holding buf_pool_mutex. This should be OK, because the field is only used for heuristic purposes. buf_page_peek_if_too_old(): If buf_pool->freed_page_clock == 0, return FALSE, so that we will not waste time moving blocks in the LRU list in the warm-up phase or when the workload fits in the buffer pool. rb://156 approved by Sunny Bains ------------------------------------------------------------------------ r5822 | marko | 2009-09-10 06:10:20 -0400 (Thu, 10 Sep 2009) | 1 line branches/zip: buf_page_release(): De-stutter the function comment. ------------------------------------------------------------------------ r5804 | marko | 2009-09-10 01:29:31 -0400 (Thu, 10 Sep 2009) | 1 line branches/zip: trx_cleanup_at_db_startup(): Fix a typo in comment. ------------------------------------------------------------------------ r5798 | calvin | 2009-09-09 11:28:10 -0400 (Wed, 09 Sep 2009) | 5 lines branches/zip: HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. But the plugin should still work with previous versions of MySQL. ------------------------------------------------------------------------ r5792 | vasil | 2009-09-09 09:35:58 -0400 (Wed, 09 Sep 2009) | 32 lines branches/zip: Fix a bug in manipulating the variable innodb_old_blocks_pct: for any value assigned it got that value -1, except for 75. When assigned 75, it got 75. mysql> set global innodb_old_blocks_pct=15; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ | Variable_name | Value | +-----------------------+-------+ | innodb_old_blocks_pct | 14 | +-----------------------+-------+ 1 row in set (0.00 sec) mysql> set global innodb_old_blocks_pct=75; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ | Variable_name | Value | +-----------------------+-------+ | innodb_old_blocks_pct | 75 | +-----------------------+-------+ After the fix it gets exactly what was assigned. Approved by: Marko (via IM) ------------------------------------------------------------------------ r5783 | marko | 2009-09-09 03:25:00 -0400 (Wed, 09 Sep 2009) | 1 line branches/zip: buf_page_is_accessed(): Correct the function comment. ------------------------------------------------------------------------ r5782 | marko | 2009-09-09 03:00:59 -0400 (Wed, 09 Sep 2009) | 2 lines branches/zip: buf_page_peek_if_too_old(): Silence a compiler warning that was introduced in r5779 on 32-bit systems. ------------------------------------------------------------------------ r5780 | marko | 2009-09-09 02:50:50 -0400 (Wed, 09 Sep 2009) | 1 line branches/zip: ut_time_ms(): Return ulint, not uint. ------------------------------------------------------------------------ r5779 | marko | 2009-09-09 02:17:19 -0400 (Wed, 09 Sep 2009) | 2 lines branches/zip: buf_page_peek_if_too_old(): Make the bitmasking work when buf_pool->freed_page_clock is wider than 32 bits. ------------------------------------------------------------------------ r5777 | marko | 2009-09-08 11:50:25 -0400 (Tue, 08 Sep 2009) | 2 lines branches/zip: Remove BUF_LRU_INITIAL_RATIO, which should have been removed together with buf_LRU_get_recent_limit(). ------------------------------------------------------------------------ r5775 | calvin | 2009-09-07 17:15:05 -0400 (Mon, 07 Sep 2009) | 13 lines branches/zip: Build InnoDB on Windows with UNIV_HOTBACKUP The changes are non-functional changes for normal InnoDB, but needed for building the Hot Backup on Windows (with UNIV_HOTBACKUP defined). - Define os_aio_use_native_aio for HB. - Do not acquire seek mutexes for backup since HB is single threaded. - Do not use srv_flush_log_at_trx_commit for HB build rb://155 Approved by: Marko ------------------------------------------------------------------------ r5752 | marko | 2009-09-03 10:55:51 -0400 (Thu, 03 Sep 2009) | 10 lines branches/zip: recv_recover_page_func(): Write the log sequence number to the compressed page, if there is one. Previously, the function only wrote the LSN to the uncompressed page. It is not clear why recv_recover_page_func() is updating FIL_PAGE_LSN in the buffer pool. The log sequence number will be stamped on the page when it is flushed to disk, in buf_flush_init_for_writing(). I noticed this inconsistency when analyzing Issue #313, but this patch does not fix it. That is no surprise, since FIL_PAGE_LSN should only matter on disk files, not in the buffer pool. ------------------------------------------------------------------------ r5751 | marko | 2009-09-03 10:36:15 -0400 (Thu, 03 Sep 2009) | 7 lines branches/zip: row_merge(): Remove a bogus debug assertion that was triggered when creating an index on an empty table. row_merge_sort(): Add debug assertions and comments that justify the loop termination condition. The bogus assertion ut_ad(ihalf > 0) was reported by Michael. ------------------------------------------------------------------------ r5748 | marko | 2009-09-03 07:05:44 -0400 (Thu, 03 Sep 2009) | 1 line branches/zip: MLOG_MULTI_REC_END: Correct the comment. ------------------------------------------------------------------------ r5747 | marko | 2009-09-03 06:46:38 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: recv_scan_log_recs(): Replace while with do...while, because the termination condition will always hold on the first iteration. ------------------------------------------------------------------------ r5746 | marko | 2009-09-03 04:55:36 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable. ------------------------------------------------------------------------ r5745 | marko | 2009-09-03 04:38:22 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers. ------------------------------------------------------------------------ r5744 | marko | 2009-09-03 04:28:35 -0400 (Thu, 03 Sep 2009) | 1 line branches/zip: ut_align(): Make ptr const, like in ut_align_down(). ------------------------------------------------------------------------ r5743 | marko | 2009-09-03 02:36:12 -0400 (Thu, 03 Sep 2009) | 3 lines branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value. ------------------------------------------------------------------------ r5736 | marko | 2009-09-02 03:53:19 -0400 (Wed, 02 Sep 2009) | 1 line branches/zip: Enclose some timestamp functions in #ifndef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5735 | marko | 2009-09-02 03:43:09 -0400 (Wed, 02 Sep 2009) | 2 lines branches/zip: univ.i: Do not undefine PACKAGE or VERSION. InnoDB source code does not refer to these macros. ------------------------------------------------------------------------ r5734 | sunny | 2009-09-02 03:08:45 -0400 (Wed, 02 Sep 2009) | 2 lines branches/zip: Update ChangeLog with r5733 changes. ------------------------------------------------------------------------ r5733 | sunny | 2009-09-02 03:05:15 -0400 (Wed, 02 Sep 2009) | 6 lines branches/zip: Fix a regression introduced by the fix for bug#26316. We check whether a transaction holds any AUTOINC locks before we acquire the kernel mutex and release those locks. Fix for rb://153. Approved by Marko. ------------------------------------------------------------------------ r5716 | vasil | 2009-08-31 03:47:49 -0400 (Mon, 31 Aug 2009) | 9 lines branches/zip: Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol" by implementing our own check in plug.in instead of using the result from the check from MySQL because it is insufficient. Approved by: Marko (rb://154) ------------------------------------------------------------------------ r5714 | marko | 2009-08-31 02:10:10 -0400 (Mon, 31 Aug 2009) | 5 lines branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state makes sense. Approved by Sunny Bains over the IM. ------------------------------------------------------------------------ r5709 | inaam | 2009-08-28 02:22:46 -0400 (Fri, 28 Aug 2009) | 5 lines branches/zip rb://152 Disable display of deprecated parameter innodb_file_io_threads in 'show variables'. ------------------------------------------------------------------------ r5708 | inaam | 2009-08-27 18:43:32 -0400 (Thu, 27 Aug 2009) | 4 lines branches/zip Remove redundant TRUE : FALSE from the return statement ------------------------------------------------------------------------ r5707 | inaam | 2009-08-27 12:20:35 -0400 (Thu, 27 Aug 2009) | 6 lines branches/zip Remove unused macros as we erased the random readahead code in r5703. Also fixed some comments. ------------------------------------------------------------------------ r5706 | inaam | 2009-08-27 12:00:27 -0400 (Thu, 27 Aug 2009) | 20 lines branches/zip rb://147 Done away with following two status variables: innodb_buffer_pool_read_ahead_rnd innodb_buffer_pool_read_ahead_seq Introduced two new status variables: innodb_buffer_pool_read_ahead = number of pages read as part of readahead since server startup innodb_buffer_pool_read_ahead_evicted = number of pages that are read in as readahead but were evicted before ever being accessed since server startup i.e.: a measure of how badly our readahead is performing SHOW INNODB STATUS will show two extra numbers in buffer pool section: pages read ahead/sec and pages evicted without access/sec Approved by: Marko ------------------------------------------------------------------------ r5705 | marko | 2009-08-27 07:56:24 -0400 (Thu, 27 Aug 2009) | 11 lines branches/zip: dict_index_find_cols(): On column name lookup failure, return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally terminating the server. Also, disable the previously added diagnostic output to the error log, because mysql-test-run does not like extra output in the error log. (Bug #44571) dict_index_add_to_cache(): Handle errors from dict_index_find_cols(). mysql-test/innodb_bug44571.test: A test case for triggering the bug. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5704 | marko | 2009-08-27 04:31:17 -0400 (Thu, 27 Aug 2009) | 32 lines branches/zip: Fix a critical bug in fast index creation that could corrupt the created indexes. row_merge(): Make "half" an in/out parameter. Determine the offset of half the output file. Copy the last blocks record-by-record instead of block-by-block, so that the records can be counted. Check that the input and output have matching n_rec. row_merge_sort(): Do not assume that two blocks of size N are merged into a block of size 2*N. The output block can be shorter than the input if the last page of each input block is almost empty. Use an accurate termination condition, based on the "half" computed by row_merge(). row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output. merge_file_t, row_merge_file_create(): Add n_rec, the number of records in the merge file. row_merge_read_clustered_index(): Update n_rec. row_merge_blocks(): Update and check n_rec. row_merge_blocks_copy(): New function, for copying the last blocks in row_merge(). Update and check n_rec. This bug was discovered with a user-supplied test case that creates an index where the initial temporary file is 249 one-megabyte blocks and the merged files become smaller. In the test, possible merge record sizes are 10, 18, and 26 bytes. rb://150 approved by Sunny Bains. This addresses Issue #320. ------------------------------------------------------------------------ r5703 | marko | 2009-08-27 03:25:00 -0400 (Thu, 27 Aug 2009) | 41 lines branches/zip: Replace the constant 3/8 ratio that controls the LRU_old size with the settable global variable innodb_old_blocks_pct. The minimum and maximum values are 5 and 95 per cent, respectively. The default is 100*3/8, in line with the old behavior. ut_time_ms(): New utility function, to return the current time in milliseconds. TODO: Is there a more efficient timestamp function, such as rdtsc divided by a power of two? buf_LRU_old_threshold_ms: New variable, corresponding to innodb_old_blocks_time. The value 0 is the default behaviour: no timeout before making blocks 'new'. bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove. bpage->access_time: New field, replacing bpage->accessed. Protected by buf_pool_mutex instead of bpage->mutex. Updated when a page is created or accessed the first time in the buffer pool. buf_LRU_old_ratio, innobase_old_blocks_pct: New variables, corresponding to innodb_old_blocks_pct buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update functions for buf_LRU_old_ratio, innobase_old_blocks_pct. buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time if buf_LRU_old_threshold_ms && bpage->old. Else observe buf_LRU_old_ratio and bpage->freed_page_clock. buf_pool_t: Add n_pages_made_young, n_pages_not_made_young, n_pages_made_young_old, n_pages_not_made_young, for statistics. buf_print(): Display buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is only for crash diagnostics. buf_print_io(): Display buf_pool->LRU_old_len and quantities derived from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is invoked by SHOW ENGINE INNODB STATUS. rb://129 approved by Heikki Tuuri. This addresses Bug #45015. ------------------------------------------------------------------------ r5702 | marko | 2009-08-27 03:03:15 -0400 (Thu, 27 Aug 2009) | 1 line branches/zip: Document also the files affected by r5698 in the ChangeLog. ------------------------------------------------------------------------ r5701 | marko | 2009-08-27 03:01:42 -0400 (Thu, 27 Aug 2009) | 1 line branches/zip: Document r5698 in the ChangeLog. ------------------------------------------------------------------------ r5698 | inaam | 2009-08-26 10:34:35 -0400 (Wed, 26 Aug 2009) | 13 lines branches/zip bug#42885 rb://148 The call to put IO threads to sleep was most probably meant for Windows only as the comment in buf0rea.c suggests. However it was enabled on all platforms. This patch restricts the sleep call to windows. This approach of not putting threads to sleep makes even more sense because now we have multiple threads working in the background and it probably is not a good idea to put all of them to sleep because a user thread wants to post a batch for readahead. Approved by: Marko ------------------------------------------------------------------------ r5697 | vasil | 2009-08-26 09:44:40 -0400 (Wed, 26 Aug 2009) | 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5696 | vasil | 2009-08-26 09:15:59 -0400 (Wed, 26 Aug 2009) | 14 lines branches/zip: Merge a change from MySQL: http://lists.mysql.com/commits/80832 2968 Jonathan Perkin 2009-08-14 Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith. modified: CMakeLists.txt cmd-line-utils/readline/util.c storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/include/univ.i ------------------------------------------------------------------------ r5695 | marko | 2009-08-26 09:14:59 -0400 (Wed, 26 Aug 2009) | 1 line branches/zip: UNIV_DEBUG_LOCK_VALIDATE: Move the definition to univ.i. ------------------------------------------------------------------------ r5694 | marko | 2009-08-26 07:25:26 -0400 (Wed, 26 Aug 2009) | 2 lines branches/zip: buf_page_t: Clarify that bpage->list may contain garbage. This comment was provoked by Inaam. ------------------------------------------------------------------------ r5687 | vasil | 2009-08-20 05:20:22 -0400 (Thu, 20 Aug 2009) | 8 lines branches/zip: ChangeLog: Follow the convention from the rest of the ChangeLog: for bugfixes from bugs.mysql.com only the bug number and title goes in the ChangeLog. Detailed explanation on what is the problem and how it was fixed is present in the bugs database. ------------------------------------------------------------------------ r5686 | vasil | 2009-08-20 05:15:05 -0400 (Thu, 20 Aug 2009) | 4 lines branches/zip: White-space fixup. ------------------------------------------------------------------------ r5685 | sunny | 2009-08-20 04:18:29 -0400 (Thu, 20 Aug 2009) | 2 lines branches/zip: Update the ChangeLog with r5684 change. ------------------------------------------------------------------------ r5684 | sunny | 2009-08-20 04:05:30 -0400 (Thu, 20 Aug 2009) | 10 lines branches/zip: Fix bug# 46650: Innodb assertion autoinc_lock == lock in lock_table_remove_low on INSERT SELECT We only store the autoinc locks that are granted in the transaction's autoinc lock vector. A transacton, that has been rolled back due to a deadlock because of an AUTOINC lock attempt, will not have added that lock to the vector. We need to check for that when we remove that lock. rb://145 Approved by Marko. ------------------------------------------------------------------------ r5681 | sunny | 2009-08-14 02:16:24 -0400 (Fri, 14 Aug 2009) | 3 lines branches/zip: When building HotBackup srv_use_sys_malloc is #ifdef out. We move access to the this variable within a !UNIV_HOTBACKUP block. ------------------------------------------------------------------------ r5671 | marko | 2009-08-13 04:46:33 -0400 (Thu, 13 Aug 2009) | 5 lines branches/zip: ha_innobase::add_index(): Fix Bug #46557: after a successful operation, read innodb_table->flags from the newly created table object, not from the old one that was just freed. Approved by Sunny. ------------------------------------------------------------------------ r5670 | marko | 2009-08-12 09:16:37 -0400 (Wed, 12 Aug 2009) | 2 lines branches/zip: trx_undo_rec_copy(): Add const qualifier to undo_rec. This is a non-functional change. ------------------------------------------------------------------------ r5663 | marko | 2009-08-11 07:42:37 -0400 (Tue, 11 Aug 2009) | 2 lines branches/zip: trx_general_rollback_for_mysql(): Remove the redundant parameter partial. If savept==NULL, partial==FALSE. ------------------------------------------------------------------------ r5662 | marko | 2009-08-11 05:54:16 -0400 (Tue, 11 Aug 2009) | 1 line branches/zip: Bump the version number to 1.0.5 after releasing 1.0.4. ------------------------------------------------------------------------ r5642 | calvin | 2009-08-06 19:04:03 -0400 (Thu, 06 Aug 2009) | 2 lines branches/zip: remove duplicate "the" in comments. ------------------------------------------------------------------------ r5639 | marko | 2009-08-06 06:39:34 -0400 (Thu, 06 Aug 2009) | 3 lines branches/zip: mem_heap_block_free(): If innodb_use_sys_malloc is set, do not tell Valgrind that the memory is free, to avoid a bogus warning in Valgrind's built-in free() hook. ------------------------------------------------------------------------ r5636 | marko | 2009-08-05 08:27:30 -0400 (Wed, 05 Aug 2009) | 2 lines branches/zip: lock_rec_validate_page(): Add the parameter zip_size. This should help track down Mantis Issue #289. ------------------------------------------------------------------------ r5635 | marko | 2009-08-05 07:06:55 -0400 (Wed, 05 Aug 2009) | 2 lines branches/zip: Replace <number> with NUMBER in some comments, to avoid problems with Doxygen XML output. ------------------------------------------------------------------------ r5629 | marko | 2009-08-04 07:42:44 -0400 (Tue, 04 Aug 2009) | 1 line branches/zip: mysql-test: Pass MTR's internal checks. ------------------------------------------------------------------------ r5626 | vasil | 2009-08-04 01:53:31 -0400 (Tue, 04 Aug 2009) | 4 lines branches/zip: Revert the dummy change from c5625. ------------------------------------------------------------------------ r5625 | vasil | 2009-08-04 01:52:48 -0400 (Tue, 04 Aug 2009) | 32 lines branches/zip: Merge 5518:5622 from branches/5.1, resolving conflict in r5622 (after resolving the conflict Makefile.am was not changed so I have made a dummy change so I can commit and thus record that branches/5.1 has been merged in branches/zip up to 5622): ------------------------------------------------------------------------ r5622 | vasil | 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) | 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5614 | vasil | 2009-07-31 11:09:07 -0400 (Fri, 31 Jul 2009) | 6 lines branches/zip: Add fsp0types.h to the list of noinst_HEADERS Suggested by: Sergey Vojtovich <svoj@sun.com> ------------------------------------------------------------------------ r5539 | vasil | 2009-07-21 06:28:27 -0400 (Tue, 21 Jul 2009) | 4 lines branches/zip: Add a test program to check whether the PAUSE instruction is available. ------------------------------------------------------------------------ r5537 | vasil | 2009-07-21 05:31:26 -0400 (Tue, 21 Jul 2009) | 5 lines branches/zip: Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per line. ------------------------------------------------------------------------ r5527 | sunny | 2009-07-20 17:56:30 -0400 (Mon, 20 Jul 2009) | 2 lines branches/zip: For HotBackup builds we don't want to hide the symbols. ------------------------------------------------------------------------ r5525 | calvin | 2009-07-20 13:14:30 -0400 (Mon, 20 Jul 2009) | 2 lines branches/zip: add ChangeLog entry for r5524. ------------------------------------------------------------------------	2009-09-28 17:34:23 +00:00
marko	41b29de7ac	branches/innodb+: Merge revisions 5091:5143 from branches/zip: ... ------------------------------------------------------------------------ r5092 | marko | 2009-05-25 09:54:17 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Adjust some function comments after r5091. ------------------------------------------------------------------------ r5100 | marko | 2009-05-25 12:09:45 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Split some long lines that were introduced in r5091. ------------------------------------------------------------------------ r5101 | marko | 2009-05-25 12:42:47 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Introduce the macro TEMP_INDEX_PREFIX_STR. This is to avoid triggering an error in Doxygen. ------------------------------------------------------------------------ r5102 | marko | 2009-05-25 13:47:14 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Add missing file comments. ------------------------------------------------------------------------ r5103 | marko | 2009-05-25 13:52:29 +0300 (Mon, 25 May 2009) | 10 lines branches/zip: Add @file comments, and convert decorative /********************************* comments to Doxygen /** style like this: /*****************************//** This conversion was performed by the following command: perl -i -e 'while(<ARGV>){if (m|^/\*{30}\**$|) { s|\*{4}$|//**| if ++$com>1; $_ .= "\@file $ARGV\n" if $com==2} print; if(eof){$.=0;undef $com}}' */*[ch] include/univ.i ------------------------------------------------------------------------ r5104 | marko | 2009-05-25 14:39:07 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Revert ut0auxconf_* to r5102, that is, make Doxygen ignore these test programs. ------------------------------------------------------------------------ r5105 | marko | 2009-05-25 14:52:20 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Enclose some #error checks inside #ifndef DOXYGEN to prevent bogus Doxygen errors. ------------------------------------------------------------------------ r5106 | marko | 2009-05-25 16:09:24 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Add some Doxygen comments, mainly to structs, typedefs, macros and global variables. Many more to go. ------------------------------------------------------------------------ r5108 | marko | 2009-05-26 00:32:35 +0300 (Tue, 26 May 2009) | 2 lines branches/zip: lexyy.c: Remove the inadvertently added @file directive. There is nothing for Doxygen to see in this file, move along. ------------------------------------------------------------------------ r5125 | marko | 2009-05-26 16:28:49 +0300 (Tue, 26 May 2009) | 3 lines branches/zip: Add some Doxygen comments for many structs, typedefs, #defines and global variables. Many are still missing. ------------------------------------------------------------------------ r5134 | marko | 2009-05-27 09:08:43 +0300 (Wed, 27 May 2009) | 1 line branches/zip: Add some Doxygen @return comments. ------------------------------------------------------------------------ r5139 | marko | 2009-05-27 10:01:40 +0300 (Wed, 27 May 2009) | 1 line branches/zip: Add Doxyfile. ------------------------------------------------------------------------ r5143 | marko | 2009-05-27 10:57:25 +0300 (Wed, 27 May 2009) | 3 lines branches/zip: buf0buf.h, Doxyfile: Fix the Doxygen translation. @defgroup is for source code modules, not for field groups. Tell Doxygen to expand the UT_LIST declarations. ------------------------------------------------------------------------	2009-05-27 09:52:16 +00:00
marko	e6c01608be	branches/innodb+: Merge revisions 5090:5091 from branches/zip: ... (Ran doxygenify.pl conversion locally, then merged and checked consistency.) ------------------------------------------------------------------------ r5091 | marko | 2009-05-25 09:30:14 +0300 (Mon, 25 May 2009) | 33 lines branches/zip: Convert the function comments to Doxygen format. This patch was created by running the following commands: for i in */*[ch]; do doxygenify.pl $i; done perl -i -pe 's#\*{3} \*/$#****/#' */*[ch] where doxygenify.pl is https://svn.innodb.com/svn/misc/trunk/tools/doxygenify.pl r510 Verified the consistency as follows: (0) not too many /* in: */ or /* out: */ comments left in the code: grep -l '/\*\s*\(in\|out\)[,:/]' */*[ch] (1) no difference when ignoring blank lines, after stripping all C90-style /* comments */, including multi-line ones, before and after applying this patch: perl -i -e 'undef $/;while(<ARGV>){s#/\*(.*?)\*/##gs;print}' */*[ch] diff -I'^\s*$' --exclude .svn -ru TREE1 TREE2 (2) after stripping @return comments and !<, generated a diff and omitted the hunks where /* out: */ function return comments were removed: perl -i -e'undef $/;while(<ARGV>){s#!<##g;s#\n\@return\t.*?\*/# \*/#gs;print}'\ */*[ch] svn diff| perl -e 'undef $/;$_=<>;s#\n-\s*/\* out[:,]([^\n]*?)(\n-[^\n]*?)*\*/##gs;print' Some unintended changes were left. These will be removed in a subsequent patch. ------------------------------------------------------------------------	2009-05-25 06:46:10 +00:00
marko	509e761f06	branches/innodb+: Merge revisions 4660:5090 from branches/zip: ... ------------------------------------------------------------------------ r4670 | vasil | 2009-04-07 09:35:23 +0300 (Tue, 07 Apr 2009) | 11 lines branches/zip: Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes of InnoDB table by replacing the pseudo random number generator with a better one (LCG). This also fixes Mantis Issue#212. Approved by: Heikki (rb://110) ------------------------------------------------------------------------ r4671 | vasil | 2009-04-07 09:37:31 +0300 (Tue, 07 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4670. ------------------------------------------------------------------------ r4673 | marko | 2009-04-07 15:45:28 +0300 (Tue, 07 Apr 2009) | 4 lines branches/zip: Allow in-place updates of UTF-8 CHAR columns from or to NULL in ROW_FORMAT=REDUNDANT. (Bug #44032) rb://107 approved by Heikki Tuuri. ------------------------------------------------------------------------ r4677 | marko | 2009-04-07 16:19:31 +0300 (Tue, 07 Apr 2009) | 1 line branches/zip: Adjust r4673 as in the merge to branches/6.0 -r4676. ------------------------------------------------------------------------ r4678 | inaam | 2009-04-07 18:45:37 +0300 (Tue, 07 Apr 2009) | 12 lines branches/zip Enable atomics on solaris (using the libc functions as defined in atomic.h) if GCC atomic builtins are not present. There still remains some work to be done (by Vasil?). This patch makes changes to plug.in to check pthread_t size and presence of atomic functions when running on solaris. The same has to become a part of the generated Makefile.in when we bake our source. Reviewed by: Heikki rb://106 ------------------------------------------------------------------------ r4687 | vasil | 2009-04-08 13:08:59 +0300 (Wed, 08 Apr 2009) | 4 lines branches/zip: Whitespace fixup in the ChangeLog ------------------------------------------------------------------------ r4688 | vasil | 2009-04-08 13:11:15 +0300 (Wed, 08 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4678. ------------------------------------------------------------------------ r4689 | marko | 2009-04-08 14:24:49 +0300 (Wed, 08 Apr 2009) | 5 lines branches/zip: Hide unnecessarily visible globals. dict_ind_redundant, dict_ind_compact: Declare these UNIV_INTERN. innodb_hton_ptr: Declare static. We do not attempt to access the built-in InnoDB any more. trx_roll_savepoints_free(): Declare UNIV_INTERN. ------------------------------------------------------------------------ r4700 | calvin | 2009-04-11 00:37:10 +0300 (Sat, 11 Apr 2009) | 9 lines branches/zip: Rewrite CMakeLists.txt CMakeLists.txt is completely rewritten: - To replace the one written by mysql - Print out some useful information, such as system name, directory, generator used, win64, Microsoft compiler, etc. - Remove one workaround for mysqld.lib location. User does not need to specify a build type ------------------------------------------------------------------------ r4702 | calvin | 2009-04-13 18:16:44 +0300 (Mon, 13 Apr 2009) | 3 lines branches/zip: delete the original CMakeLists.txt A new version will be committed, suggested by Ken. ------------------------------------------------------------------------ r4703 | calvin | 2009-04-13 18:20:45 +0300 (Mon, 13 Apr 2009) | 9 lines branches/zip: new CMakeLists.txt CMakeLists.txt is completely rewritten with enhancements: - Print out useful information, such as system name, directory, generator used, win64, Microsoft compiler, etc. - Remove one workaround for mysqld.lib location. User does not need to specify a build type when invoking MSVC generator. ------------------------------------------------------------------------ r4706 | vasil | 2009-04-14 14:32:11 +0300 (Tue, 14 Apr 2009) | 5 lines branches/zip: When using the random function, first take the modulus by the number of pages and then typecast to ulint. ------------------------------------------------------------------------ r4707 | calvin | 2009-04-14 17:47:31 +0300 (Tue, 14 Apr 2009) | 13 lines branches/zip: remove statically linked libraries from mysql To make zlib and strings dynamically linked; mysqld will export additional functions required by InnoDB. Since the symbols will be resolved dynamically during runtime, wdl_load_mapfile() is no longer able to make any function calls to ones in mysqld. As the result, strtoull() (from strings.lib) is replaced with _strtoui64(). rb://111 Approved by: Marko ------------------------------------------------------------------------ r4712 | vasil | 2009-04-15 12:26:32 +0300 (Wed, 15 Apr 2009) | 157 lines branches/zip: Merge revisions 4481:4710 from branches/5.1: (resolving conflict in r4574, r4575 and skipping r4699 and r4705 because analogous changes to r4699 and r4705 were already made to branches/zip) ------------------------------------------------------------------------ r4573 | vasil | 2009-03-30 14:17:13 +0300 (Mon, 30 Mar 2009) | 4 lines Changed paths: M /branches/5.1/mysql-test/innodb.test branches/5.1: Fix email address from dev@innodb.com to innodb_dev_ww@oracle.com ------------------------------------------------------------------------ r4574 | vasil | 2009-03-30 14:27:08 +0300 (Mon, 30 Mar 2009) | 38 lines Changed paths: M /branches/5.1/Makefile.am M /branches/5.1/mysql-test/innodb.test branches/5.1: Restore the state of INNODB_THREAD_CONCURRENCY to silence this warning: TEST RESULT TIME (ms) ------------------------------------------------------------ worker[1] Using MTR_BUILD_THREAD 250, with reserved ports 12500..12509 main.innodb [ pass ] 8803 MTR's internal check of the test case 'main.innodb' failed. This means that the test case does not preserve the state that existed before the test case was executed. Most likely the test case did not do a proper clean-up. This is the diff of the states of the servers before and after the test case was executed: mysqltest: Logging to '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'. mysqltest: Results saved in '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'. mysqltest: Connecting to server localhost:12500 (socket /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ... mysqltest: ... Connected. mysqltest: Start processing test commands from './include/check-testcase.test' ... mysqltest: ... Done processing test commands. --- /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-03-30 14:12:31.000000000 +0300 +++ /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-03-30 14:12:41.000000000 +0300 @@ -99,7 +99,7 @@ INNODB_SUPPORT_XA ON INNODB_SYNC_SPIN_LOOPS 20 INNODB_TABLE_LOCKS ON -INNODB_THREAD_CONCURRENCY 8 +INNODB_THREAD_CONCURRENCY 16 INNODB_THREAD_SLEEP_DELAY 10000 INSERT_ID 0 INTERACTIVE_TIMEOUT 28800 mysqltest: Result content mismatch not ok ------------------------------------------------------------------------ r4575 | vasil | 2009-03-30 15:55:31 +0300 (Mon, 30 Mar 2009) | 8 lines Changed paths: M /branches/5.1/mysql-test/innodb.result M /branches/5.1/mysql-test/innodb.test branches/5.1: Fix Bug#43309 Test main.innodb can't be run twice Make the innodb mysql-test more flexible by inspecting how much a variable of interest has changed since the start of the test. Do not assume the variables have zero values at the start of the test. ------------------------------------------------------------------------ r4576 | vasil | 2009-03-30 16:25:10 +0300 (Mon, 30 Mar 2009) | 4 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Revert a change to Makefile.am that I committed accidentally in c4574. ------------------------------------------------------------------------ r4659 | vasil | 2009-04-06 15:34:51 +0300 (Mon, 06 Apr 2009) | 6 lines Changed paths: M /branches/5.1/mysql-test/innodb.test branches/5.1: Followup to r4575 and the fix of Bug#43309 Test main.innodb can't be run twice: Add an explanatory comment, as suggested by Patrick Crews in the bug report. ------------------------------------------------------------------------ r4699 | vasil | 2009-04-09 14:01:52 +0300 (Thu, 09 Apr 2009) | 15 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/srv0srv.h M /branches/5.1/page/page0cur.c M /branches/5.1/srv/srv0srv.c branches/5.1: Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes of InnoDB table by replacing the PRNG that is used to pick random pages with a better one. This is based on r4670 but also adds a new configuration option and enables the fix only if this option is changed. Please skip the present revision when merging. Approved by: Heikki (via email) ------------------------------------------------------------------------ r4705 | vasil | 2009-04-14 14:30:13 +0300 (Tue, 14 Apr 2009) | 5 lines Changed paths: M /branches/5.1/page/page0cur.c branches/5.1: When using the random function, first take the modulus by the number of pages and then typecast to ulint. ------------------------------------------------------------------------ r4710 | vasil | 2009-04-15 11:55:18 +0300 (Wed, 15 Apr 2009) | 25 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL (looks like this is against 5.0 but they later merged it to 5.1): ------------------------------------------------------------ revno: 1810.3846.1 committer: Alexey Botchkov <holyfoot@mysql.com> branch nick: 31435 timestamp: Tue 2008-11-11 14:42:32 +0400 message: Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse I think we don't need to issue an error statement in the convert_search_mode_to_innobase(). Returning the PAGE_CUR_UNSUPP value is enough as allows to handle this case depending on the requirements. per-file comments: sql/ha_innodb.cc Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse no error issued in convert_search_mode_to_innobase. ha_innobase::records_in_range() returns HA_POS_ERROR if search mode isn't supported. modified: sql/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4713 | vasil | 2009-04-15 12:36:16 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Add missing ChangeLog entries ------------------------------------------------------------------------ r4714 | vasil | 2009-04-15 12:36:57 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Fix typo in the ChangeLog ------------------------------------------------------------------------ r4715 | vasil | 2009-04-15 12:39:04 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Whitespace cleanup in ChangeLog ------------------------------------------------------------------------ r4716 | vasil | 2009-04-15 21:36:06 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4543. ------------------------------------------------------------------------ r4717 | calvin | 2009-04-16 01:22:35 +0300 (Thu, 16 Apr 2009) | 18 lines branches/zip: Use the Windows Interlocked functions for atomic memory access Mapping the atomic operations to Windows Interlocked functions: os_compare_and_swap_* to InterlockedCompareExchange(64) os_atomic_increment_* to InterlockedExchangeAdd(64) os_atomic_test_and_set_byte to InterlockedExchange In this patch, the legacy code under UNIV_CAN_USE_X86_ASSEMBLER is removed all together, and add HAVE_WINDOWS_ATOMICS and INNODB_RW_LOCKS_USE_ATOMICS to CMakeLists.txt This is to address mantis issue#194. rb://113 Approved by: Marko ------------------------------------------------------------------------ r4720 | vasil | 2009-04-16 09:44:48 +0300 (Thu, 16 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4717. ------------------------------------------------------------------------ r4721 | marko | 2009-04-16 10:32:09 +0300 (Thu, 16 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Initialize prebuilt->index_usable. This should have been done in r4631. Spotted by Michael. ------------------------------------------------------------------------ r4728 | marko | 2009-04-16 16:02:27 +0300 (Thu, 16 Apr 2009) | 3 lines branches/zip: univ.i: Define REFMAN as the base URL of the MySQL Reference Manual and use it in every string. This fixes Issue #221. ------------------------------------------------------------------------ r4733 | calvin | 2009-04-17 08:13:20 +0300 (Fri, 17 Apr 2009) | 6 lines branches/zip: minor changes to CMakeLists.txt All are non-functional changes: - should check for long (not int), spotted by Sunny - comment out the project definition, avoiding to generate another .sln file. ------------------------------------------------------------------------ r4748 | vasil | 2009-04-18 00:50:09 +0300 (Sat, 18 Apr 2009) | 118 lines branches/zip: Merge revisions 4710:4746 from branches/5.1: ------------------------------------------------------------------------ r4746 | vasil | 2009-04-18 00:32:08 +0300 (Sat, 18 Apr 2009) | 110 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/pars0pars.h branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2728.10.2 committer: Ignacio Galarza <iggy@mysql.com> branch nick: mysql-5.1-bugteam-bug29125 timestamp: Fri 2009-02-13 11:41:47 -0500 message: Bug#29125 Windows Server X64: so many compiler warnings - Remove bothersome warning messages. This change focuses on the warnings that are covered by the ignore file: support-files/compiler_warnings.supp. - Strings are guaranteed to be max uint in length modified: client/mysql_upgrade.c client/mysqladmin.cc client/mysqlbinlog.cc client/mysqlcheck.c client/mysqldump.c client/mysqlslap.c client/mysqltest.cc client/sql_string.cc extra/comp_err.c extra/yassl/src/buffer.cpp extra/yassl/taocrypt/include/block.hpp extra/yassl/taocrypt/src/algebra.cpp extra/yassl/taocrypt/src/asn.cpp include/config-win.h libmysql/libmysql.c mysys/array.c mysys/base64.c mysys/charset.c mysys/checksum.c mysys/default.c mysys/default_modify.c mysys/hash.c mysys/mf_keycache.c mysys/mf_tempdir.c mysys/my_append.c mysys/my_compress.c mysys/my_conio.c mysys/my_copy.c mysys/my_getwd.c mysys/my_pread.c mysys/my_quick.c mysys/my_read.c mysys/safemalloc.c mysys/string.c server-tools/instance-manager/buffer.cc server-tools/instance-manager/instance.cc server-tools/instance-manager/options.cc server-tools/instance-manager/parse.h sql-common/client.c sql-common/my_user.c sql/event_data_objects.cc sql/event_parse_data.cc sql/events.cc sql/gen_lex_hash.cc sql/item.h sql/item_func.cc sql/item_strfunc.cc sql/item_timefunc.cc sql/lock.cc sql/log_event.cc sql/log_event.h sql/log_event_old.cc sql/net_serv.cc sql/sp_head.h sql/spatial.h sql/sql_class.h sql/sql_connect.cc sql/sql_crypt.cc sql/sql_error.cc sql/sql_insert.cc sql/sql_lex.cc sql/sql_lex.h sql/sql_load.cc sql/sql_prepare.cc sql/sql_profile.cc sql/sql_repl.cc sql/sql_servers.cc sql/sql_string.cc sql/sql_table.cc sql/sql_trigger.cc sql/sql_udf.cc sql/sql_view.cc sql/udf_example.c sql/uniques.cc storage/archive/azio.c storage/archive/azlib.h storage/csv/ha_tina.cc storage/csv/ha_tina.h storage/csv/transparent_file.h storage/federated/ha_federated.cc storage/federated/ha_federated.h storage/heap/hp_write.c storage/innobase/handler/ha_innodb.cc storage/innobase/include/pars0pars.h storage/myisam/ha_myisam.cc storage/myisam/mi_check.c storage/myisam/mi_packrec.c storage/myisam/mi_search.c storage/myisam/rt_index.c storage/myisammrg/ha_myisammrg.cc strings/ctype.c strings/my_vsnprintf.c tests/bug25714.c tests/mysql_client_test.c ------------------------------------------------------------------------ r4749 | vasil | 2009-04-18 00:58:08 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for t4748. ------------------------------------------------------------------------ r4751 | vasil | 2009-04-18 01:29:16 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Silence warning about unused variables. ------------------------------------------------------------------------ r4752 | vasil | 2009-04-18 01:30:37 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Include the needed header for memset(). ------------------------------------------------------------------------ r4753 | vasil | 2009-04-18 01:31:34 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Silence a compiler warning. ------------------------------------------------------------------------ r4756 | vasil | 2009-04-18 02:19:03 +0300 (Sat, 18 Apr 2009) | 5 lines branches/zip: Rename the aux config program and give it a more specific name because more are coming. ------------------------------------------------------------------------ r4757 | vasil | 2009-04-18 02:22:33 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Add comment and copyright notice to the aux config program. ------------------------------------------------------------------------ r4758 | vasil | 2009-04-18 02:40:47 +0300 (Sat, 18 Apr 2009) | 5 lines branches/zip: Add aux config programs to emulate the newly added checks in plug.in (from r4678). ------------------------------------------------------------------------ r4830 | marko | 2009-04-20 16:11:38 +0300 (Mon, 20 Apr 2009) | 6 lines branches/zip: Cosmetic fixes. row_unlock_for_mysql(): Add a const qualifier to read-only rec_t*. Use dict_index_is_clust(). CMakeLists.txt: svn propset svn:eol-style native. ------------------------------------------------------------------------ r4893 | marko | 2009-04-23 09:32:36 +0300 (Thu, 23 Apr 2009) | 11 lines branches/zip: Introduce the logical type names trx_id_t, roll_ptr_t, and undo_no_t. Each type is still defined as dulint. This is an initial step towards replacing dulint with a 64-bit data type. Because modern compilers have no trouble supporting 64-bit arithmetics even on 32-bit targets, the dulint struct is a relic that should go. The last remaining major use of dulint is dictionary IDs (table, index, and row ids). rb://114 approved by Sunny Bains ------------------------------------------------------------------------ r4894 | marko | 2009-04-23 10:21:07 +0300 (Thu, 23 Apr 2009) | 1 line branches/zip: ChangeLog: Document r4893. ------------------------------------------------------------------------ r4895 | marko | 2009-04-23 10:22:06 +0300 (Thu, 23 Apr 2009) | 1 line branches/zip: ChangeLog: Add the missing include/ to two files. ------------------------------------------------------------------------ r4896 | marko | 2009-04-23 10:37:40 +0300 (Thu, 23 Apr 2009) | 4 lines branches/zip: row_scan_and_check_index(): Improve the diagnostics, by reporting errors from row_search_for_mysql() in the error log. The errors will still be ignored by CHECK TABLE. This is somewhat related to Issue #211. ------------------------------------------------------------------------ r4897 | marko | 2009-04-23 10:40:34 +0300 (Thu, 23 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Check row_merge_is_index_usable() earlier, to make the logic clearer. ------------------------------------------------------------------------ r4898 | marko | 2009-04-23 15:15:07 +0300 (Thu, 23 Apr 2009) | 4 lines branches/zip: Correct a misleading comment. PAGE_MAX_TRX_ID will be updated in ibuf_insert_low() and updated from the insert buffer tree page to the secondary index tree page during the insert buffer merge. ------------------------------------------------------------------------ r4915 | marko | 2009-04-27 13:40:20 +0300 (Mon, 27 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Add some comments on prebuilt->index_usable, as suggested by Michael. ------------------------------------------------------------------------ r4921 | marko | 2009-04-29 11:51:25 +0300 (Wed, 29 Apr 2009) | 2 lines branches/zip: btr_cur_optimistic_insert(): Remove a redundant condition. The insert buffer tree is a clustered index. ------------------------------------------------------------------------ r4922 | marko | 2009-04-29 23:23:27 +0300 (Wed, 29 Apr 2009) | 22 lines branches/zip: Distinguish temporary tables in MLOG_FILE_CREATE. This addresses Mantis Issue #23 in InnoDB Hot Backup and some of MySQL Bug #41609. In MLOG_FILE_CREATE, we need to distinguish temporary tables, so that InnoDB Hot Backup can work correctly. It turns out that we can do this easily, by using a bit of the previously unused parameter for page number. (The page number parameter of MLOG_FILE_CREATE has been written as 0 ever since MySQL 4.1, which introduced MLOG_FILE_CREATE.) MLOG_FILE_FLAG_TEMP: A flag for indicating a temporary table in the page number parameter of MLOG_FILE_ operations. fil_op_write_log(): Add the parameter log_flags. fil_op_log_parse_or_replay(): Add the parameter log_flags. Do not replay MLOG_FILE_CREATE when MLOG_FILE_FLAG_TEMP is set in log_flags. This only affects ibbackup --apply-log. InnoDB itself never replays file operations. rb://117 approved by Heikki Tuuri ------------------------------------------------------------------------ r4977 | marko | 2009-05-13 15:49:38 +0300 (Wed, 13 May 2009) | 12 lines branches/zip: Merge revisions 4746:4976 from branches/5.1: ------------------------------------------------------------------------ r4976 | marko | 2009-05-13 15:44:54 +0300 (Wed, 13 May 2009) | 6 lines branches/5.1: Display DB_ROLL_PTR in the COLUMNS section of the innodb_table_monitor output. It was accidentally omitted due to an off-by-one loop condition. (Bug #44320) rb://116 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4978 | vasil | 2009-05-13 16:21:55 +0300 (Wed, 13 May 2009) | 4 lines branches/zip: Add ChangeLog entry for r4977. ------------------------------------------------------------------------ r4995 | marko | 2009-05-14 15:31:43 +0300 (Thu, 14 May 2009) | 24 lines branches/zip: Merge revisions 4976:4994 from branches/5.1: ------------------------------------------------------------------------ r4994 | marko | 2009-05-14 15:04:55 +0300 (Thu, 14 May 2009) | 18 lines branches/5.1: Prevent a race condition in innobase_commit() by ensuring that innodb_commit_concurrency>0 remains constant at run time. (Bug #42101) srv_commit_concurrency: Make this a static variable in ha_innodb.cc. innobase_commit_concurrency_validate(): Check that innodb_commit_concurrency is not changed from or to 0 at run time. This is needed, because innobase_commit() assumes that innodb_commit_concurrency>0 remains constant. Without this limitation, the checks for innodb_commit_concurrency>0 in innobase_commit() should be removed and that function would have to acquire and release commit_cond_m at least twice per invocation. Normally, innodb_commit_concurrency=0, and introducing the mutex operations would mean significant overhead. innodb_bug42101.test, innodb_bug42101-nonzero.test: Test cases. rb://123 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5000 | vasil | 2009-05-14 20:13:41 +0300 (Thu, 14 May 2009) | 4 lines branches/zip: Add ChangeLog entry for r4994. ------------------------------------------------------------------------ r5026 | marko | 2009-05-18 16:29:51 +0300 (Mon, 18 May 2009) | 1 line branches/zip: buf_validate(): Add missing out: comment. ------------------------------------------------------------------------ r5027 | marko | 2009-05-18 16:36:10 +0300 (Mon, 18 May 2009) | 1 line branches/zip: Add some missing out: comments to buf0buf.h, buf0buf.c. ------------------------------------------------------------------------ r5028 | marko | 2009-05-18 16:40:07 +0300 (Mon, 18 May 2009) | 11 lines branches/zip: When executing an optimistic update by delete-and-insert, correctly estimate the free space on the compressed page by page_zip_available(..., create=TRUE). This was reported as Issue #231. btr_cur_update_alloc_zip(): Add the parameter ibool create and pass it to page_zip_available(). The parameter was previously passed as 0. btr_cur_optimistic_update(): Pass create=TRUE to btr_cur_update_alloc_zip(). rb://120 approved by Heikki Tuuri ------------------------------------------------------------------------ r5030 | marko | 2009-05-19 10:04:04 +0300 (Tue, 19 May 2009) | 2 lines branches/zip: os_thread_get_curr_id(), os_thread_get_curr(): Add missing out: comments. ------------------------------------------------------------------------ r5031 | marko | 2009-05-19 10:30:02 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Add missing out: comments to nullary functions. ------------------------------------------------------------------------ r5033 | marko | 2009-05-19 11:00:51 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Remove bogus out: comments of functions returning void. ------------------------------------------------------------------------ r5034 | marko | 2009-05-19 12:41:32 +0300 (Tue, 19 May 2009) | 1 line branches/zip: row_update_prebuilt_trx(): Correct bogus comment. ------------------------------------------------------------------------ r5035 | marko | 2009-05-19 13:04:58 +0300 (Tue, 19 May 2009) | 3 lines branches/zip: ut0auxconf_have_solaris_atomics.c: Get the function declarations from <atomic.h>. Call the functions with proper arguments. ------------------------------------------------------------------------ r5036 | marko | 2009-05-19 13:05:50 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Add proper comments to some file page accessors. ------------------------------------------------------------------------ r5037 | marko | 2009-05-19 13:08:16 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Fix a typo that was introduced in r5036. ------------------------------------------------------------------------ r5038 | marko | 2009-05-19 22:59:07 +0300 (Tue, 19 May 2009) | 30 lines branches/zip: Write PAGE_MAX_TRX_ID to the redo log. Otherwise, transactions that are started before the rollback of incomplete transactions has finished may have an inconsistent view of the secondary indexes. dict_index_is_sec_or_ibuf(): Auxiliary function for controlling updates and checks of PAGE_MAX_TRX_ID: check whether an index is a secondary index or the insert buffer tree. page_set_max_trx_id(), page_update_max_trx_id(), lock_rec_insert_check_and_lock(), lock_sec_rec_modify_check_and_lock(), btr_cur_ins_lock_and_undo(), btr_cur_upd_lock_and_undo(): Add the parameter mtr. page_set_max_trx_id(): Allow mtr to be NULL. When mtr==NULL, do not attempt to write to the redo log. This only occurs when creating a page or reorganizing a compressed page. In these cases, the PAGE_MAX_TRX_ID will be set correctly during the application of redo log records, even though there is no explicit log record about it. btr_discard_only_page_on_level(): Preserve PAGE_MAX_TRX_ID. This function should be unreachable, though. btr_cur_pessimistic_update(): Update PAGE_MAX_TRX_ID. Add some assertions for checking that PAGE_MAX_TRX_ID is set on all secondary index leaf pages. rb://115 tested by Michael, fixes Issue #211 ------------------------------------------------------------------------ r5039 | marko | 2009-05-19 23:13:12 +0300 (Tue, 19 May 2009) | 1 line branches/zip: ib_wqueue_wait(): Add decorative comment. ------------------------------------------------------------------------ r5041 | marko | 2009-05-20 08:42:12 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Add missing function comments. ------------------------------------------------------------------------ r5042 | marko | 2009-05-20 08:46:01 +0300 (Wed, 20 May 2009) | 1 line branches/zip: sync0rw.ic: Remove an extra ; that was added in r5041. ------------------------------------------------------------------------ r5044 | marko | 2009-05-20 11:11:58 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: mlog_parse_index(): Correct a parameter comment and add a const qualifier that was missing. ------------------------------------------------------------------------ r5045 | marko | 2009-05-20 11:37:08 +0300 (Wed, 20 May 2009) | 1 line branches/zip: fil0fil.c: Correct some comments. ------------------------------------------------------------------------ r5046 | marko | 2009-05-20 12:19:40 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Fix some function comments. ------------------------------------------------------------------------ r5047 | marko | 2009-05-20 12:26:49 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ut_snprintf(): Fix the function comments. ------------------------------------------------------------------------ r5048 | marko | 2009-05-20 12:28:44 +0300 (Wed, 20 May 2009) | 3 lines branches/zip: inno_bcmp(): Remove this memcmp replacement. srv0start.c does not (any longer) call memcmp. srv_parse_megabytes(): Add a function comment. ------------------------------------------------------------------------ r5052 | marko | 2009-05-20 12:32:37 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ib_vector_is_empty(): Fix the function comment. ------------------------------------------------------------------------ r5054 | marko | 2009-05-20 12:35:33 +0300 (Wed, 20 May 2009) | 1 line branches/zip: page_cur_lcg_prng(): Add missing parameter list. ------------------------------------------------------------------------ r5057 | marko | 2009-05-20 12:45:17 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Remove bogus in: comments from struct members. ------------------------------------------------------------------------ r5058 | marko | 2009-05-20 13:06:03 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Clean up some function comments. ------------------------------------------------------------------------ r5060 | marko | 2009-05-20 14:06:59 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Clean up some comments. ------------------------------------------------------------------------ r5061 | marko | 2009-05-20 14:07:49 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: innodb_export_status(): Remove the return(0), now that the function was declared void in r5060. ------------------------------------------------------------------------ r5062 | marko | 2009-05-20 14:45:03 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ha_innodb.cc: Clean up some comments. ------------------------------------------------------------------------ r5063 | marko | 2009-05-20 16:10:17 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ut_dulint_sort(): Write proper comments. ------------------------------------------------------------------------ r5064 | marko | 2009-05-20 16:17:26 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: innobase_end(), innobase_flush_logs(): Document the function parameters. ------------------------------------------------------------------------ r5065 | marko | 2009-05-20 23:17:43 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ha_innodb.cc: Add some missing function comments. ------------------------------------------------------------------------ r5066 | marko | 2009-05-21 00:51:23 +0300 (Thu, 21 May 2009) | 2 lines branches/zip: Fix some function comments. ------------------------------------------------------------------------ r5070 | vasil | 2009-05-21 08:27:00 +0300 (Thu, 21 May 2009) | 4 lines branches/zip: Whitespace fixup. ------------------------------------------------------------------------	2009-05-25 06:20:53 +00:00
marko	9bff459082	branches/innodb+: Merge revisions 4150:4528 from branches/zip: ... ------------------------------------------------------------------------ r4152 | marko | 2009-02-10 12:52:27 +0200 (Tue, 10 Feb 2009) | 12 lines branches/zip: When innodb_use_sys_malloc is set, ignore innodb_additional_mem_pool_size, because nothing will be allocated from mem_comm_pool. mem_pool_create(): Remove the assertion about size. The function will work with any size. However, an assertion would fail in ut_malloc_low() when size==0. mem_init(): When srv_use_sys_malloc is set, pass size=1 to mem_pool_create(). mem0mem.c: Add #include "srv0srv.h" that is needed by mem0dbg.c. ------------------------------------------------------------------------ r4153 | vasil | 2009-02-10 22:58:17 +0200 (Tue, 10 Feb 2009) | 14 lines branches/zip: (followup to r4145) Non-functional change: Change the os_atomic_increment() and os_compare_and_swap() functions to macros to avoid artificial limitations on the types of those functions' arguments. As a consequence typecasts from the source code can be removed. Also remove Google's copyright from os0sync.ic because that file no longer contains code from Google. Approved by: Marko (rb://88), also ok from Inaam via IM ------------------------------------------------------------------------ r4163 | marko | 2009-02-12 00:14:19 +0200 (Thu, 12 Feb 2009) | 4 lines branches/zip: Make innodb_thread_concurrency=0 the default. The old default was 8. ------------------------------------------------------------------------ r4169 | calvin | 2009-02-12 10:37:10 +0200 (Thu, 12 Feb 2009) | 3 lines branches/zip: Adjust the result file of innodb_thread_concurrency_basic test. The default value of innodb_thread_concurrency is changed to 0 (from 8) via r4163. ------------------------------------------------------------------------ r4174 | vasil | 2009-02-12 17:38:27 +0200 (Thu, 12 Feb 2009) | 4 lines branches/zip: Fix pathname of the file to patch. ------------------------------------------------------------------------ r4176 | vasil | 2009-02-13 10:06:31 +0200 (Fri, 13 Feb 2009) | 7 lines branches/zip: Fix the failing mysql-test partition_innodb, which failed only if run after innodb_trx_weight (or other test that would leave LATEST DEADLOCK ERROR into the output of SHOW ENGINE INNODB STATUS). Find further explanation for the failure at the top of the added patch partition_innodb.diff. ------------------------------------------------------------------------ r4198 | vasil | 2009-02-17 09:06:07 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: Add the full text of the GPLv2 license into the root directory of the plugin. In previous releases this file was copied from an external source (https://svn.innodb.com/svn/plugin/trunk/support/COPYING) "manually" when creating the source and binary archives. It is less confusing to have this present in the root directory of the SVN branch. ------------------------------------------------------------------------ r4199 | vasil | 2009-02-17 09:11:58 +0200 (Tue, 17 Feb 2009) | 4 lines branches/zip: Add Google's license into COPYING.Google. ------------------------------------------------------------------------ r4200 | vasil | 2009-02-17 09:56:33 +0200 (Tue, 17 Feb 2009) | 11 lines branches/zip: To the files touched by the Google patch from c4144 (excluding include/os0sync.ic because later we removed Google code from that file): * Remove the Google license * Remove old Innobase copyright lines * Add a reference to the Google license and to the GPLv2 license at the top, as recommended by the lawyers at Oracle Legal. ------------------------------------------------------------------------ r4201 | vasil | 2009-02-17 10:12:02 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 1/28] ------------------------------------------------------------------------ r4202 | vasil | 2009-02-17 10:15:06 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 2/28] ------------------------------------------------------------------------ r4203 | vasil | 2009-02-17 10:25:45 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 3/28] ------------------------------------------------------------------------ r4204 | vasil | 2009-02-17 10:55:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 4/28] ------------------------------------------------------------------------ r4205 | vasil | 2009-02-17 10:59:22 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 5/28] ------------------------------------------------------------------------ r4206 | vasil | 2009-02-17 11:02:27 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 6/28] ------------------------------------------------------------------------ r4207 | vasil | 2009-02-17 11:04:28 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 7/28] ------------------------------------------------------------------------ r4208 | vasil | 2009-02-17 11:06:49 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 8/28] ------------------------------------------------------------------------ r4209 | vasil | 2009-02-17 11:10:18 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 9/28] ------------------------------------------------------------------------ r4210 | vasil | 2009-02-17 11:12:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 10/28] ------------------------------------------------------------------------ r4211 | vasil | 2009-02-17 11:14:40 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 11/28] ------------------------------------------------------------------------ r4212 | vasil | 2009-02-17 11:18:35 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 12/28] ------------------------------------------------------------------------ r4213 | vasil | 2009-02-17 11:24:40 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 13/28] ------------------------------------------------------------------------ r4214 | vasil | 2009-02-17 11:27:31 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 13/28] ------------------------------------------------------------------------ r4215 | vasil | 2009-02-17 11:29:55 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 15/28] ------------------------------------------------------------------------ r4216 | vasil | 2009-02-17 11:33:38 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 16/28] ------------------------------------------------------------------------ r4217 | vasil | 2009-02-17 11:36:44 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 17/28] ------------------------------------------------------------------------ r4218 | vasil | 2009-02-17 11:39:11 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 18/28] ------------------------------------------------------------------------ r4219 | vasil | 2009-02-17 11:41:24 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 19/28] ------------------------------------------------------------------------ r4220 | vasil | 2009-02-17 11:43:50 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 20/28] ------------------------------------------------------------------------ r4221 | vasil | 2009-02-17 11:46:52 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 21/28] ------------------------------------------------------------------------ r4222 | vasil | 2009-02-17 11:50:12 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 22/28] ------------------------------------------------------------------------ r4223 | vasil | 2009-02-17 11:53:58 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 23/28] ------------------------------------------------------------------------ r4224 | vasil | 2009-02-17 12:01:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 24/28] ------------------------------------------------------------------------ r4225 | vasil | 2009-02-17 12:05:45 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 25/28] ------------------------------------------------------------------------ r4226 | vasil | 2009-02-17 12:09:16 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 26/28] ------------------------------------------------------------------------ r4227 | vasil | 2009-02-17 12:12:56 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 27/28] ------------------------------------------------------------------------ r4228 | vasil | 2009-02-17 12:14:04 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 28/28] ------------------------------------------------------------------------ r4229 | vasil | 2009-02-17 12:30:55 +0200 (Tue, 17 Feb 2009) | 4 lines branches/zip: Add the copyright notice to the non C files. ------------------------------------------------------------------------ r4231 | marko | 2009-02-17 14:26:53 +0200 (Tue, 17 Feb 2009) | 12 lines Minor cleanup of the Google SMP patch. sync_array_object_signalled(): Add a (void) cast to eliminate a gcc warning about the return value of os_atomic_increment() being ignored. rw_lock_create_func(): Properly indent the preprocessor directives. rw_lock_x_lock_low(), rw_lock_x_lock_func_nowait(): Split lines correctly. rw_lock_set_writer_id_and_recursion_flag(): Silence a Valgrind warning. Do not mix statements and variable declarations. ------------------------------------------------------------------------ r4232 | marko | 2009-02-17 14:59:54 +0200 (Tue, 17 Feb 2009) | 3 lines branches/zip: When assigning lock->recursive = FALSE, also flag lock->writer_thread invalid, so that Valgrind will catch more errors. This is related to Issue #175. ------------------------------------------------------------------------ r4242 | marko | 2009-02-18 17:01:09 +0200 (Wed, 18 Feb 2009) | 2 lines branches/zip: UT_DBG_STOP: Use do{} while(0) to silence a g++-4.3.2 warning about a while(0); statement. This should fix (part of) Issue #176. ------------------------------------------------------------------------ r4243 | marko | 2009-02-18 17:04:03 +0200 (Wed, 18 Feb 2009) | 3 lines branches/zip: buf_buddy_get_slot(): Fix a gcc 4.3.2 warning about an empty body of a "for" statement. This fixes part of Issue #176. ------------------------------------------------------------------------ r4244 | marko | 2009-02-18 17:25:45 +0200 (Wed, 18 Feb 2009) | 11 lines branches/zip: Protect ut_total_allocated_memory with ut_list_mutex. Unprotected updates to ut_total_allocated_memory in os_mem_alloc_large() and os_mem_free_large(), called during fast index creation, may corrupt the variable and cause assertion failures. Also, add UNIV_MEM_ALLOC() and UNIV_MEM_FREE() instrumentation around os_mem_alloc_large() and os_mem_free_large(), so that Valgrind can detect more errors. rb://90 approved by Heikki Tuuri. This addresses Issue #177. ------------------------------------------------------------------------ r4248 | marko | 2009-02-19 11:52:39 +0200 (Thu, 19 Feb 2009) | 2 lines branches/zip: page_zip_set_size(): Fix a g++ 4.3.2 warning about an empty body in a "for" statement. This closes Issue #176. ------------------------------------------------------------------------ r4251 | inaam | 2009-02-19 15:46:27 +0200 (Thu, 19 Feb 2009) | 8 lines branches/zip: Issue #178 rb://91 Change plug.in to have same CXXFLAGS as CFLAGS. This is to ensure that both .c and .cc files get compiled with same flags. To fix the issue where UNIV_LINUX was defined only in .c files. Approved by: Marko ------------------------------------------------------------------------ r4258 | vasil | 2009-02-20 11:52:19 +0200 (Fri, 20 Feb 2009) | 7 lines branches/zip: Cleanup in ChangeLog: * Wrap lines at 78 characters * Changed files are listed alphabetically * White-space cleanup ------------------------------------------------------------------------ r4259 | vasil | 2009-02-20 11:59:42 +0200 (Fri, 20 Feb 2009) | 6 lines branches/zip: ChangeLog: Remove include/os0sync.ic from the entry about the google patch, this file was modified later to not include Google's code. ------------------------------------------------------------------------ r4262 | vasil | 2009-02-20 14:56:59 +0200 (Fri, 20 Feb 2009) | 373 lines branches/zip: Merge revisions 4035:4261 from branches/5.1: ------------------------------------------------------------------------ r4065 | sunny | 2009-01-29 16:01:36 +0200 (Thu, 29 Jan 2009) | 8 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: In the last round of AUTOINC cleanup we assumed that AUTOINC is only defined for integer columns. This caused an assertion failure when we checked for the maximum value of a column type. We now calculate the max value for floating-point autoinc columns too. Fix Bug#42400 - InnoDB autoinc code can't handle floating-point columns rb://84 and Mantis issue://162 ------------------------------------------------------------------------ r4111 | sunny | 2009-02-03 22:06:52 +0200 (Tue, 03 Feb 2009) | 2 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Add the ULL suffix otherwise there is an overflow. ------------------------------------------------------------------------ r4128 | vasil | 2009-02-08 21:36:45 +0200 (Sun, 08 Feb 2009) | 18 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2709.20.31 committer: Timothy Smith <timothy.smith@sun.com> branch nick: 51 timestamp: Fri 2008-12-19 01:28:51 +0100 message: Disable part of innodb-autoinc.test, because the MySQL server asserts when compiled --with-debug, due to bug 39828, "autoinc wraps around when offset and increment > 1". This change should be reverted when that bug is fixed (and a a few other minor changes to the test as described in comments). modified: mysql-test/r/innodb-autoinc.result mysql-test/t/innodb-autoinc.test ------------------------------------------------------------------------ r4129 | vasil | 2009-02-08 21:54:25 +0200 (Sun, 08 Feb 2009) | 310 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Merge a change from MySQL: [looks like the changes to innodb-autoinc.test were made as part of the following huge merge, but we are merging only changes to that file] ------------------------------------------------------------ revno: 2546.47.1 committer: Luis Soares <luis.soares@sun.com> branch nick: 5.1-rpl timestamp: Fri 2009-01-23 13:22:05 +0100 message: merge: 5.1 -> 5.1-rpl conflicts: Text conflict in client/mysqltest.cc Text conflict in mysql-test/include/wait_until_connected_again.inc Text conflict in mysql-test/lib/mtr_report.pm Text conflict in mysql-test/mysql-test-run.pl Text conflict in mysql-test/r/events_bugs.result Text conflict in mysql-test/r/log_state.result Text conflict in mysql-test/r/myisam_data_pointer_size_func.result Text conflict in mysql-test/r/mysqlcheck.result Text conflict in mysql-test/r/query_cache.result Text conflict in mysql-test/r/status.result Text conflict in mysql-test/suite/binlog/r/binlog_index.result Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result Text conflict in mysql-test/suite/rpl/r/rpl_packet.result Text conflict in mysql-test/suite/rpl/t/rpl_packet.test Text conflict in mysql-test/t/disabled.def Text conflict in mysql-test/t/events_bugs.test Text conflict in mysql-test/t/log_state.test Text conflict in mysql-test/t/myisam_data_pointer_size_func.test Text conflict in mysql-test/t/mysqlcheck.test Text conflict in mysql-test/t/query_cache.test Text conflict in mysql-test/t/rpl_init_slave_func.test Text conflict in mysql-test/t/status.test removed: mysql-test/suite/parts/r/partition_bit_ndb.result mysql-test/suite/parts/t/partition_bit_ndb.test mysql-test/suite/parts/t/partition_sessions.test mysql-test/suite/sys_vars/inc/tmp_table_size_basic.inc mysql-test/suite/sys_vars/r/tmp_table_size_basic_32.result mysql-test/suite/sys_vars/r/tmp_table_size_basic_64.result mysql-test/suite/sys_vars/t/tmp_table_size_basic_32.test mysql-test/suite/sys_vars/t/tmp_table_size_basic_64.test mysql-test/t/log_bin_trust_function_creators_func-master.opt mysql-test/t/rpl_init_slave_func-slave.opt added: mysql-test/include/check_events_off.inc mysql-test/include/cleanup_fake_relay_log.inc mysql-test/include/have_simple_parser.inc mysql-test/include/no_running_event_scheduler.inc mysql-test/include/no_running_events.inc mysql-test/include/running_event_scheduler.inc mysql-test/include/setup_fake_relay_log.inc mysql-test/include/wait_condition_sp.inc mysql-test/r/fulltext_plugin.result mysql-test/r/have_simple_parser.require mysql-test/r/innodb_bug38231.result mysql-test/r/innodb_bug39438.result mysql-test/r/innodb_mysql_rbk.result mysql-test/r/partition_innodb_semi_consistent.result mysql-test/r/query_cache_28249.result mysql-test/r/status2.result mysql-test/std_data/bug40482-bin.000001 mysql-test/suite/binlog/r/binlog_innodb_row.result mysql-test/suite/binlog/t/binlog_innodb_row.test mysql-test/suite/rpl/r/rpl_binlog_corruption.result mysql-test/suite/rpl/t/rpl_binlog_corruption-master.opt mysql-test/suite/rpl/t/rpl_binlog_corruption.test mysql-test/suite/sys_vars/r/tmp_table_size_basic.result mysql-test/suite/sys_vars/t/tmp_table_size_basic.test mysql-test/t/fulltext_plugin-master.opt mysql-test/t/fulltext_plugin.test mysql-test/t/innodb_bug38231.test mysql-test/t/innodb_bug39438-master.opt mysql-test/t/innodb_bug39438.test mysql-test/t/innodb_mysql_rbk-master.opt mysql-test/t/innodb_mysql_rbk.test mysql-test/t/partition_innodb_semi_consistent-master.opt mysql-test/t/partition_innodb_semi_consistent.test mysql-test/t/query_cache_28249.test mysql-test/t/status2.test renamed: mysql-test/suite/funcs_1/r/is_collation_character_set_applicability.result => mysql-test/suite/funcs_1/r/is_coll_char_set_appl.result mysql-test/suite/funcs_1/t/is_collation_character_set_applicability.test => mysql-test/suite/funcs_1/t/is_coll_char_set_appl.test modified: .bzr-mysql/default.conf CMakeLists.txt client/mysql.cc client/mysql_upgrade.c client/mysqlcheck.c client/mysqltest.cc configure.in extra/resolve_stack_dump.c extra/yassl/include/openssl/ssl.h include/config-win.h include/m_ctype.h include/my_global.h mysql-test/extra/binlog_tests/database.test mysql-test/extra/rpl_tests/rpl_auto_increment.test mysql-test/include/commit.inc mysql-test/include/have_32bit.inc mysql-test/include/have_64bit.inc mysql-test/include/index_merge1.inc mysql-test/include/linux_sys_vars.inc mysql-test/include/windows_sys_vars.inc mysql-test/lib/mtr_report.pm mysql-test/mysql-test-run.pl mysql-test/r/alter_table.result mysql-test/r/commit_1innodb.result mysql-test/r/create.result mysql-test/r/csv.result mysql-test/r/ctype_ucs.result mysql-test/r/date_formats.result mysql-test/r/events_bugs.result mysql-test/r/events_scheduling.result mysql-test/r/fulltext.result mysql-test/r/func_if.result mysql-test/r/func_in.result mysql-test/r/func_str.result mysql-test/r/func_time.result mysql-test/r/grant.result mysql-test/r/index_merge_myisam.result mysql-test/r/information_schema.result mysql-test/r/innodb-autoinc.result mysql-test/r/innodb.result mysql-test/r/innodb_mysql.result mysql-test/r/log_bin_trust_function_creators_func.result mysql-test/r/log_state.result mysql-test/r/myisampack.result mysql-test/r/mysql.result mysql-test/r/mysqlcheck.result mysql-test/r/partition_datatype.result mysql-test/r/partition_mgm.result mysql-test/r/partition_pruning.result mysql-test/r/query_cache.result mysql-test/r/read_buffer_size_basic.result mysql-test/r/read_rnd_buffer_size_basic.result mysql-test/r/rpl_init_slave_func.result mysql-test/r/select.result mysql-test/r/status.result mysql-test/r/strict.result mysql-test/r/temp_table.result mysql-test/r/type_bit.result mysql-test/r/type_date.result mysql-test/r/type_float.result mysql-test/r/warnings_engine_disabled.result mysql-test/r/xml.result mysql-test/suite/binlog/r/binlog_database.result mysql-test/suite/binlog/r/binlog_index.result mysql-test/suite/binlog/r/binlog_innodb.result mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result mysql-test/suite/binlog/t/binlog_innodb.test mysql-test/suite/funcs_1/r/is_columns_is.result mysql-test/suite/funcs_1/r/is_engines.result mysql-test/suite/funcs_1/r/storedproc.result mysql-test/suite/funcs_1/storedproc/param_check.inc mysql-test/suite/funcs_2/t/disabled.def mysql-test/suite/ndb/t/disabled.def mysql-test/suite/parts/r/partition_bit_innodb.result mysql-test/suite/parts/r/partition_bit_myisam.result mysql-test/suite/parts/r/partition_special_innodb.result mysql-test/suite/parts/t/disabled.def mysql-test/suite/parts/t/partition_special_innodb.test mysql-test/suite/parts/t/partition_value_innodb.test mysql-test/suite/parts/t/partition_value_myisam.test mysql-test/suite/parts/t/partition_value_ndb.test mysql-test/suite/rpl/r/rpl_auto_increment.result mysql-test/suite/rpl/r/rpl_packet.result mysql-test/suite/rpl/r/rpl_row_create_table.result mysql-test/suite/rpl/r/rpl_slave_skip.result mysql-test/suite/rpl/r/rpl_trigger.result mysql-test/suite/rpl/t/disabled.def mysql-test/suite/rpl/t/rpl_packet.test mysql-test/suite/rpl/t/rpl_row_create_table.test mysql-test/suite/rpl/t/rpl_slave_skip.test mysql-test/suite/rpl/t/rpl_trigger.test mysql-test/suite/rpl_ndb/t/disabled.def mysql-test/suite/sys_vars/inc/key_buffer_size_basic.inc mysql-test/suite/sys_vars/inc/sort_buffer_size_basic.inc mysql-test/suite/sys_vars/r/key_buffer_size_basic_32.result mysql-test/suite/sys_vars/r/key_buffer_size_basic_64.result mysql-test/suite/sys_vars/r/sort_buffer_size_basic_32.result mysql-test/suite/sys_vars/r/sort_buffer_size_basic_64.result mysql-test/t/alter_table.test mysql-test/t/create.test mysql-test/t/csv.test mysql-test/t/ctype_ucs.test mysql-test/t/date_formats.test mysql-test/t/disabled.def mysql-test/t/events_bugs.test mysql-test/t/events_scheduling.test mysql-test/t/fulltext.test mysql-test/t/func_if.test mysql-test/t/func_in.test mysql-test/t/func_str.test mysql-test/t/func_time.test mysql-test/t/grant.test mysql-test/t/information_schema.test mysql-test/t/innodb-autoinc.test mysql-test/t/innodb.test mysql-test/t/innodb_mysql.test mysql-test/t/log_bin_trust_function_creators_func.test mysql-test/t/log_state.test mysql-test/t/myisam_data_pointer_size_func.test mysql-test/t/myisampack.test mysql-test/t/mysql.test mysql-test/t/mysqlcheck.test mysql-test/t/partition_innodb_stmt.test mysql-test/t/partition_mgm.test mysql-test/t/partition_pruning.test mysql-test/t/query_cache.test mysql-test/t/rpl_init_slave_func.test mysql-test/t/select.test mysql-test/t/status.test mysql-test/t/strict.test mysql-test/t/temp_table.test mysql-test/t/type_bit.test mysql-test/t/type_date.test mysql-test/t/type_float.test mysql-test/t/warnings_engine_disabled.test mysql-test/t/xml.test mysys/my_getopt.c mysys/my_init.c scripts/mysql_install_db.sh sql-common/my_time.c sql/field.cc sql/field.h sql/filesort.cc sql/ha_partition.cc sql/ha_partition.h sql/item.cc sql/item_cmpfunc.cc sql/item_func.h sql/item_strfunc.cc sql/item_sum.cc sql/item_timefunc.cc sql/item_timefunc.h sql/log.cc sql/log.h sql/log_event.cc sql/log_event.h sql/mysql_priv.h sql/mysqld.cc sql/opt_range.cc sql/partition_info.cc sql/repl_failsafe.cc sql/rpl_constants.h sql/set_var.cc sql/slave.cc sql/spatial.h sql/sql_acl.cc sql/sql_base.cc sql/sql_binlog.cc sql/sql_class.h sql/sql_cursor.cc sql/sql_delete.cc sql/sql_lex.cc sql/sql_lex.h sql/sql_locale.cc sql/sql_parse.cc sql/sql_partition.cc sql/sql_plugin.cc sql/sql_plugin.h sql/sql_profile.cc sql/sql_repl.cc sql/sql_select.cc sql/sql_select.h sql/sql_show.cc sql/sql_table.cc sql/sql_trigger.cc sql/sql_trigger.h sql/table.cc sql/table.h sql/unireg.cc storage/csv/ha_tina.cc storage/federated/ha_federated.cc storage/heap/ha_heap.cc storage/innobase/Makefile.am storage/innobase/btr/btr0sea.c storage/innobase/buf/buf0lru.c storage/innobase/dict/dict0dict.c storage/innobase/dict/dict0mem.c storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innobase/include/btr0sea.h storage/innobase/include/dict0dict.h storage/innobase/include/dict0mem.h storage/innobase/include/ha_prototypes.h storage/innobase/include/lock0lock.h storage/innobase/include/row0mysql.h storage/innobase/include/sync0sync.ic storage/innobase/include/ut0ut.h storage/innobase/lock/lock0lock.c storage/innobase/os/os0file.c storage/innobase/plug.in storage/innobase/row/row0mysql.c storage/innobase/row/row0sel.c storage/innobase/srv/srv0srv.c storage/innobase/srv/srv0start.c storage/innobase/ut/ut0ut.c storage/myisam/ft_boolean_search.c strings/ctype.c strings/xml.c tests/mysql_client_test.c win/configure.js mysql-test/suite/funcs_1/t/is_coll_char_set_appl.test ------------------------------------------------------------------------ r4165 | calvin | 2009-02-12 01:34:27 +0200 (Thu, 12 Feb 2009) | 1 line Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: minor non-functional changes. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4263 | vasil | 2009-02-20 15:00:46 +0200 (Fri, 20 Feb 2009) | 4 lines branches/zip: Add a ChangeLog entry for a change in r4262. ------------------------------------------------------------------------ r4265 | marko | 2009-02-20 22:31:03 +0200 (Fri, 20 Feb 2009) | 5 lines branches/zip: Make innodb_use_sys_malloc=ON the default. Replace srv_use_sys_malloc with UNIV_LIKELY(srv_use_sys_malloc) to improve branch prediction in the default case. Approved by Ken over the IM. ------------------------------------------------------------------------ r4266 | vasil | 2009-02-20 23:29:32 +0200 (Fri, 20 Feb 2009) | 7 lines branches/zip: Add a sentence at the top of COPYING.Google to clarify that this license does not apply to the whole InnoDB. Suggested by: Ken ------------------------------------------------------------------------ r4268 | marko | 2009-02-23 12:43:51 +0200 (Mon, 23 Feb 2009) | 9 lines branches/zip: Initialize ut_list_mutex at startup. Without this fix, ut_list_mutex would be used uninitialized when innodb_use_sys_malloc=1. This fix addresses Issue #181. ut_mem_block_list_init(): Rename to ut_mem_init() and make public. ut_malloc_low(), ut_free_all_mem(): Add ut_a(ut_mem_block_list_inited). mem_init(): Call ut_mem_init(). ------------------------------------------------------------------------ r4269 | marko | 2009-02-23 15:09:49 +0200 (Mon, 23 Feb 2009) | 7 lines branches/zip: When freeing an uncompressed BLOB page, tolerate garbage in FIL_PAGE_TYPE. (Bug #43043, Issue #182) btr_check_blob_fil_page_type(): New function. btr_free_externally_stored_field(), btr_copy_blob_prefix(): Call btr_check_blob_fil_page_type() to check FIL_PAGE_TYPE. ------------------------------------------------------------------------ r4272 | marko | 2009-02-23 23:10:18 +0200 (Mon, 23 Feb 2009) | 8 lines branches/zip: Adjust the fix of Issue #182 in r4269 per Inaam's suggestion. btr_check_blob_fil_page_type(): Replace the parameter const char* op with ibool read. Do not print anything about page type mismatch when reading a BLOB page in Antelope format. Print space id before page number. ------------------------------------------------------------------------ r4273 | marko | 2009-02-24 00:11:11 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: ut_mem_init(): Add the assertion !ut_mem_block_list_inited. ------------------------------------------------------------------------ r4274 | marko | 2009-02-24 00:14:38 +0200 (Tue, 24 Feb 2009) | 12 lines branches/zip: Fix bugs in the fix of Issue #181. Tested inside and outside Valgrind, with innodb_use_sys_malloc set to 0 and 1. mem_init(): Invoke ut_mem_init() before mem_pool_create(), because the latter one will invoke ut_malloc(). srv_general_init(): Do not initialize the memory subsystem (mem_init()). innobase_init(): Initialize the memory subsystem (mem_init()) before calling srv_parse_data_file_paths_and_sizes(), which needs ut_malloc(). Call ut_free_all_mem() in error handling to clean up after the mem_init(). ------------------------------------------------------------------------ r4280 | marko | 2009-02-24 15:14:59 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: Remove unused function os_mem_alloc_nocache(). ------------------------------------------------------------------------ r4281 | marko | 2009-02-24 16:02:48 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: Remove the unused function dict_index_get_type(). ------------------------------------------------------------------------ r4283 | marko | 2009-02-24 23:06:56 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: srv0start.c: Remove unnecessary #include "mem0pool.h". ------------------------------------------------------------------------ r4284 | marko | 2009-02-24 23:26:38 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: mem0mem.c: Remove unnecessary #include "mach0data.h". ------------------------------------------------------------------------ r4288 | vasil | 2009-02-25 10:48:07 +0200 (Wed, 25 Feb 2009) | 21 lines branches/zip: Merge revisions 4261:4287 from branches/5.1: ------------------------------------------------------------------------ r4287 | sunny | 2009-02-25 05:32:01 +0200 (Wed, 25 Feb 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Fix Bug#42714 AUTO_INCREMENT errors in 5.1.31. There are two changes to the autoinc handling. 1. To fix the immediate problem from the bug report, we must ensure that the value written to the table is always less than the max value stored in dict_table_t. 2. The second related change is that according to MySQL documentation when the offset is greater than the increment, we should ignore the offset. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4289 | vasil | 2009-02-25 10:53:51 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: Add ChangeLog entry for the fix in r4288. ------------------------------------------------------------------------ r4290 | vasil | 2009-02-25 11:05:44 +0200 (Wed, 25 Feb 2009) | 11 lines branches/zip: Make ChangeLog entries for bugs in bugs.mysql.com in the form: Fix Bug#12345 bug title (for bugs after 1.0.2 was released and the ChangeLog published) There is no need to bloat the ChangeLog with information that is available via bugs.mysql.com. Discussed with: Marko ------------------------------------------------------------------------ r4291 | vasil | 2009-02-25 11:08:32 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: Fix Bug synopsis and remove explanation ------------------------------------------------------------------------ r4292 | marko | 2009-02-25 12:09:15 +0200 (Wed, 25 Feb 2009) | 25 lines branches/zip: Correct the initialization of the memory subsystem once again, to finally put Issue #181 to rest. Revert some parts of r4274. It is best not to call ut_malloc() before srv_general_init(). mem_init(): Do not call ut_mem_init(). srv_general_init(): Initialize the memory subsystem in two phases: first ut_mem_init(), then mem_init(). This is because os_sync_init() and sync_init() depend on ut_mem_init() and mem_init() depends on os_sync_init() or sync_init(). srv_parse_data_file_paths_and_sizes(), srv_parse_log_group_home_dirs(): Remove the output parameters. Assign to the global variables directly. Allocate memory with malloc() instead of ut_malloc(), because these functions will be called before srv_general_init(). srv_free_paths_and_sizes(): New function, for cleaning up after srv_parse_data_file_paths_and_sizes() and srv_parse_log_group_home_dirs(). rb://92 approved by Sunny Bains ------------------------------------------------------------------------ r4297 | vasil | 2009-02-25 17:19:19 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: White-space cleanup in the ChangeLog ------------------------------------------------------------------------ r4301 | vasil | 2009-02-25 21:33:32 +0200 (Wed, 25 Feb 2009) | 5 lines branches/zip: Do not output the commands that restore the environment because they depend on the state of the environment before the test starts executing. ------------------------------------------------------------------------ r4315 | vasil | 2009-02-26 09:21:20 +0200 (Thu, 26 Feb 2009) | 5 lines branches/zip: Apply any necessary patches to the mysql tree at the end of setup.sh This step was previously done manually (and sometimes forgotten). ------------------------------------------------------------------------ r4319 | marko | 2009-02-26 23:27:51 +0200 (Thu, 26 Feb 2009) | 6 lines branches/zip: btr_check_blob_fil_page_type(): Do not report FIL_PAGE_TYPE mismatch even when purging a BLOB. Heavy users may have large data files created with MySQL 5.0 or earlier, and they don not want to have the error log flooded with such messages. This fixes Issue #182. ------------------------------------------------------------------------ r4320 | inaam | 2009-02-27 02:13:19 +0200 (Fri, 27 Feb 2009) | 8 lines branches/zip This is to revert the changes made to the plug.in (r4251) as a fix for issue# 178. Changes to plug.in will not propogate to a plugin installation unless autotools are rerun which is unacceptable. A fix for issue# 178 will be committed in a separate commit. ------------------------------------------------------------------------ r4321 | inaam | 2009-02-27 02:16:46 +0200 (Fri, 27 Feb 2009) | 6 lines branches/zip This is a fix for issue#178. Instead of using UNIV_LINUX which is defined through CFLAGS we use compiler generated define __linux__ that is effective for both .c and .cc files. ------------------------------------------------------------------------ r4324 | vasil | 2009-02-27 13:27:18 +0200 (Fri, 27 Feb 2009) | 39 lines branches/zip: Add FreeBSD to the list of the operating systems that have sizeof(pthread_t) == sizeof(void*) (i.e. word size). On FreeBSD pthread_t is defined like: /usr/include/sys/_pthreadtypes.h: typedef struct pthread *pthread_t; I did the following tests (per Inaam's recommendation): a) appropriate version of GCC is available on that platform (4.1.2 or higher for atomics to be available) On FreeBSD 6.x the default compiler is 3.4.6, on FreeBSD 7.x the default one is 4.2.1. One can always install the version of choice from the ports collection. If gcc 3.x is used then HAVE_GCC_ATOMIC_BUILTINS will not be defined and thus the change I am committing will make no difference. b) find out if sizeof(pthread_t) == sizeof(long) On 32 bit both are 4 bytes, on 64 bit both are 8 bytes. c) find out the compiler generated platform define (e.g.: __aix, __sunos__ etc.) The macro is __FreeBSD__. d) patch univ.i with the appropriate platform define e) build the mysql f) ensure it is using atomic builtins (look at the err.log message at system startup. It should say we are using atomics for both mutexes and rw-locks) g) do sanity testing (keeping in view the smp changes) I ran the mysql-test suite. All tests pass. ------------------------------------------------------------------------ r4353 | vasil | 2009-03-05 09:27:29 +0200 (Thu, 05 Mar 2009) | 6 lines branches/zip: As suggested by Ken, print a message that says that the Google SMP patch (GCC atomics) is disabled if it is. Also extend the message when the patch is partially enabled to make it clear that it is partially enabled. ------------------------------------------------------------------------ r4356 | vasil | 2009-03-05 13:49:51 +0200 (Thu, 05 Mar 2009) | 4 lines branches/zip: Fix typo made in r4353. ------------------------------------------------------------------------ r4357 | vasil | 2009-03-05 16:38:59 +0200 (Thu, 05 Mar 2009) | 23 lines branches/zip: Implement a check whether pthread_t objects can be used by GCC atomic builtin functions. This check is implemented in plug.in and defines the macro HAVE_ATOMIC_PTHREAD_T. This macro is checked in univ.i and the relevant part of the code enabled (the one that uses GCC atomics against pthread_t objects). In addition to this, the same program that is compiled as part of the plug.in check is added in ut/ut0auxconf.c. In the InnoDB Plugin source archives that are shipped to the users, a generated Makefile.in is added. That Makefile.in will be modified to compile ut/ut0auxconf.c and define the macro HAVE_ATOMIC_PTHREAD_T if the compilation succeeds. I.e. Makefile.in will emulate the work that is done by plug.in. This is done in order to make the check happen and HAVE_ATOMIC_PTHREAD_T eventually defined without regenerating MySQL's ./configure from ./storage/innobase/plug.in. The point is not to ask users to install the autotools and regenerate ./configure. rb://95 Approved by: Marko ------------------------------------------------------------------------ r4360 | vasil | 2009-03-05 22:23:17 +0200 (Thu, 05 Mar 2009) | 21 lines branches/zip: Merge revisions 4287:4357 from branches/5.1: ------------------------------------------------------------------------ r4325 | sunny | 2009-03-02 02:28:52 +0200 (Mon, 02 Mar 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Bug#43203: Overflow from auto incrementing causes server segv It was not a SIGSEGV but an assertion failure. The assertion was checking the invariant that *first_value passed in by MySQL doesn't contain a value that is greater than the max value for that type. The assertion has been changed to a check and if the value is greater than the max we report a generic AUTOINC failure. rb://93 Approved by Heikki ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4361 | vasil | 2009-03-05 22:27:54 +0200 (Thu, 05 Mar 2009) | 30 lines branches/zip: Merge revision 4358 from branches/5.1 (resolving a conflict): ------------------------------------------------------------------------ r4358 | vasil | 2009-03-05 21:21:10 +0200 (Thu, 05 Mar 2009) | 21 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2728.19.1 committer: Alfranio Correia <alfranio.correia@sun.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-02-03 11:36:46 +0000 message: BUG#42445 Warning messages in innobase/handler/ha_innodb.cc There was a type casting problem in the storage/innobase/handler/ha_innodb.cc, (int ha_innobase::write_row(...)). Innobase uses has an internal error variable of type 'ulint' while mysql uses an 'int'. To fix the problem the function manipulates an error variable of type 'ulint' and only casts it into 'int' when needs to return the value. modified: storage/innobase/handler/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4362 | vasil | 2009-03-05 22:29:07 +0200 (Thu, 05 Mar 2009) | 23 lines branches/zip: Merge revision 4359 from branches/5.1: ------------------------------------------------------------------------ r4359 | vasil | 2009-03-05 21:42:01 +0200 (Thu, 05 Mar 2009) | 14 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2747 committer: Timothy Smith <timothy.smith@sun.com> branch nick: 51 timestamp: Fri 2009-01-16 17:49:07 +0100 message: Add another cast to ignore int/ulong difference in error types, silence warning on Win64 modified: storage/innobase/handler/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4363 | vasil | 2009-03-05 22:31:37 +0200 (Thu, 05 Mar 2009) | 4 lines branches/zip: Add ChangeLog entry for the bugfix in c4360. ------------------------------------------------------------------------ r4378 | calvin | 2009-03-09 10:10:17 +0200 (Mon, 09 Mar 2009) | 7 lines branches/zip: remove compile flag MYSQL_SERVER for dynamic plugin The dynamic plugin on Windows used to be built with MYSQL_SERVER compile flag, while it is not the case for other platforms. r3797 assumed MYSQL_SERVER was not defined for dynamic plugin, which introduced the engine crash during dropping a database. ------------------------------------------------------------------------ r4396 | marko | 2009-03-12 09:22:27 +0200 (Thu, 12 Mar 2009) | 3 lines branches/zip: btr_store_big_rec_extern_fields(): Initialize FIL_PAGE_TYPE in a separate redo log entry. This will make ibbackup --apply-log debugging easier. ------------------------------------------------------------------------ r4397 | marko | 2009-03-12 09:26:11 +0200 (Thu, 12 Mar 2009) | 3 lines branches/zip: trx_sys_create_doublewrite_buf(): As the dummy change, initialize FIL_PAGE_TYPE. This will make it easier to write the debug assertions for ibbackup --apply-log. ------------------------------------------------------------------------ r4401 | marko | 2009-03-12 10:26:40 +0200 (Thu, 12 Mar 2009) | 19 lines branches/zip: Merge revisions 4359:4400 from branches/5.1: ------------------------------------------------------------------------ r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 2 lines branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position also for unlock_row(). (Bug #39320) ------------------------------------------------------------------------ r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 5 lines branches/5.1: Fix a bug in multi-table semi-consistent reads. Remember the acquired record locks per table handle (row_prebuilt_t) rather than per transaction (trx_t), so that unlock_row should successfully unlock all non-matching rows in multi-table operations. This deficiency was found while investigating Bug #39320. ------------------------------------------------------------------------ These were submitted as rb://94 and rb://96 and approved by Heikki Tuuri. ------------------------------------------------------------------------ r4455 | marko | 2009-03-16 11:43:34 +0200 (Mon, 16 Mar 2009) | 2 lines branches/zip: UT_LIST_VALIDATE(): Add the parameter ASSERTION and adjust all callers. ------------------------------------------------------------------------ r4456 | marko | 2009-03-16 12:59:25 +0200 (Mon, 16 Mar 2009) | 6 lines branches/zip: UT_LIST_VALIDATE(): Assert that the link is non-NULL before dereferencing it. In this way, ut_list_node_313 will be pointing to the last non-NULL list item at the time of the assertion failure. (gcc-4.3.2 -O3 seems to optimize the common subexpressions and make the variable NULL, though.) ------------------------------------------------------------------------ r4457 | marko | 2009-03-16 14:12:02 +0200 (Mon, 16 Mar 2009) | 2 lines branches/zip: sync_thread_add_level(): Make the assertions about level == SYNC_BUF_BLOCK more readable. ------------------------------------------------------------------------ r4461 | vasil | 2009-03-17 09:38:19 +0200 (Tue, 17 Mar 2009) | 6 lines branches/zip: Remove mysql-test/patches/bug32625.diff because that bug was fixed in the mysql repository (1 year and 4 months after sending them the simple patch!). See http://bugs.mysql.com/32625 ------------------------------------------------------------------------ r4465 | marko | 2009-03-17 12:34:19 +0200 (Tue, 17 Mar 2009) | 1 line branches/zip: buf0buddy.c: Add and adjust some debug assertions. ------------------------------------------------------------------------ r4473 | vasil | 2009-03-17 15:50:30 +0200 (Tue, 17 Mar 2009) | 5 lines branches/zip: Increment the InnoDB Plugin version from 1.0.3 to 1.0.4 now that 1.0.3 has been released. ------------------------------------------------------------------------ r4478 | vasil | 2009-03-18 11:53:53 +0200 (Wed, 18 Mar 2009) | 5 lines branches/zip: Remove mysql-test/patches/bug41893.diff because that bug has been fixed in the MySQL repository, see http://bugs.mysql.com/41893. ------------------------------------------------------------------------ r4479 | marko | 2009-03-18 12:43:54 +0200 (Wed, 18 Mar 2009) | 2 lines branches/zip: buf_LRU_block_remove_hashed_page(): Add some debug assertions. ------------------------------------------------------------------------ r4480 | marko | 2009-03-18 14:32:13 +0200 (Wed, 18 Mar 2009) | 1 line branches/zip: buf_buddy_free_low(): Correct the function comment. ------------------------------------------------------------------------ r4482 | marko | 2009-03-19 15:23:32 +0200 (Thu, 19 Mar 2009) | 12 lines branches/zip: Merge revisions 4400:4481 from branches/5.1: ------------------------------------------------------------------------ r4481 | marko | 2009-03-19 15:01:48 +0200 (Thu, 19 Mar 2009) | 6 lines branches/5.1: row_unlock_for_mysql(): Do not unlock records that were modified by the current transaction. This bug was introduced or unmasked in r4400. rb://97 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4490 | marko | 2009-03-20 12:33:33 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Non-functional change for reducing dependencies in InnoDB Hot Backup: Replace srv_sys->dummy_ind1 and srv_sys->dummy_ind2 with dict_ind_redundant and dict_ind_compact, initialized in dict_init(). ------------------------------------------------------------------------ r4491 | marko | 2009-03-20 12:45:18 +0200 (Fri, 20 Mar 2009) | 2 lines branches/zip: Add const qualifiers or in/out comments to some function parameters in log0log. ------------------------------------------------------------------------ r4492 | marko | 2009-03-20 12:52:14 +0200 (Fri, 20 Mar 2009) | 5 lines branches/zip: page_validate(): Always report the space id and the name of the index. In Hot Backup, do not invoke comparison functions, as MySQL collations will be unavailable. ------------------------------------------------------------------------ r4493 | marko | 2009-03-20 13:24:06 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: Replace fil_get_space_for_id_low() with fil_space_get_by_id(). ------------------------------------------------------------------------ r4494 | marko | 2009-03-20 13:51:35 +0200 (Fri, 20 Mar 2009) | 3 lines branches/zip: fil0fil.c: Refer to fil_system directly, not via local vars. This eliminates some "unused variable" warnings when building InnoDB Hot Backup in such a way that all mutex operations are no-ops. ------------------------------------------------------------------------ r4495 | marko | 2009-03-20 14:15:52 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: innobase_get_at_most_n_mbchars(): Declare in ha_prototypes.h. ------------------------------------------------------------------------ r4496 | marko | 2009-03-20 14:48:26 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_recover_page(): Remove compile-time constant parameters. ------------------------------------------------------------------------ r4497 | marko | 2009-03-20 14:56:19 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_sys_init(): Remove a compile-time constant parameter. ------------------------------------------------------------------------ r4498 | marko | 2009-03-20 15:08:05 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Non-functional change: Add const qualifiers. log_block_checksum_is_ok_or_old_format(), recv_sys_add_to_parsing_buf(): The log block is read-only. Make it const. ------------------------------------------------------------------------ r4499 | marko | 2009-03-20 15:10:25 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_scan_log_recs(): Remove a compile-time constant parameter. ------------------------------------------------------------------------ r4500 | marko | 2009-03-20 15:47:17 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: fil_init(): Add the parameter hash_size. ------------------------------------------------------------------------ r4501 | vasil | 2009-03-20 16:50:41 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Add any entry about the release of 1.0.3 in the ChangeLog. ------------------------------------------------------------------------ r4515 | marko | 2009-03-23 10:49:53 +0200 (Mon, 23 Mar 2009) | 1 line branches/zip: hash_table_t: adaptive: Remove from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4516 | marko | 2009-03-23 10:57:16 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Define and use ASSERT_HASH_MUTEX_OWN. Make it a no-op in UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4517 | marko | 2009-03-23 11:07:20 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Define and use PAGE_ZIP_MATCH. In UNIV_HOTBACKUP builds, assume fixed allocation. ------------------------------------------------------------------------ r4521 | marko | 2009-03-23 12:05:47 +0200 (Mon, 23 Mar 2009) | 1 line branches/zip: buf_page_print(): Clean up the code #ifdef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r4522 | marko | 2009-03-23 12:20:50 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Exclude some operating system interface code from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4523 | marko | 2009-03-23 13:00:43 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Remove the remaining references to hash_table_t::adapive from UNIV_HOTBACKUP builds. This should have been done in r4515. ------------------------------------------------------------------------ r4524 | marko | 2009-03-23 14:05:18 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Enclose recv_recovery_from_backup_on and recv_recovery_from_backup_is_on() in #ifdef UNIV_LOG_ARCHIVE. ------------------------------------------------------------------------ r4525 | marko | 2009-03-23 14:57:45 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: recv_parse_or_apply_log_rec_body(): Add debug assertions ensuring that FIL_PAGE_TYPE makes sense when applying log records. ------------------------------------------------------------------------ r4526 | marko | 2009-03-23 16:21:34 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Remove unneeded definitions and dependencies from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4527 | calvin | 2009-03-23 23:15:33 +0200 (Mon, 23 Mar 2009) | 5 lines branches/zip: adjust build files on Windows Adjust the patch positions based on the latest MySQL source. Also add the patches to the .bat files for vs9. ------------------------------------------------------------------------	2009-03-24 08:32:21 +00:00
inaam	8318893d3a	branches/innodb+ ... Enable group commit functionality. rb://47 approved by: Heikki	2009-01-14 07:52:06 +00:00
marko	f7f4081672	branches/innodb+: Merge revisions 2986:3152 from branches/zip: ... ------------------------------------------------------------------------ r3036 | marko | 2008-11-12 12:34:30 +0200 (Wed, 12 Nov 2008) | 4 lines branches/zip: dtuple_validate(): When UNIV_DEBUG_VALGRIND is defined, rely solely on the UNIV_MEM_ASSERT_RW() check and disable the for loop that would only cause additional noise. ------------------------------------------------------------------------ r3037 | marko | 2008-11-12 13:52:57 +0200 (Wed, 12 Nov 2008) | 6 lines branches/zip: row_vers_impl_x_locked_off_kernel(): Remove compilation warnings about prev_trx_id and vers_del being possibly uninitialized, by handling the case prev_version == NULL in a single if block. rb://45 approved by Inaam Rana. ------------------------------------------------------------------------ r3131 | michael | 2008-11-17 14:56:56 +0200 (Mon, 17 Nov 2008) | 9 lines branches/zip: rb://53 Improve innodb_supports_xa system variable handling and reduces the number of retrievals of the value from MySQL. Approved by: Marko, over IM ------------------------------------------------------------------------ r3132 | michael | 2008-11-17 16:02:01 +0200 (Mon, 17 Nov 2008) | 5 lines branches/zip: rb://53 Final version of rb://53, fixes the styling of a comment, makes the definition and the declaration of thd_supports_xa() identical commentwise. ------------------------------------------------------------------------ r3141 | marko | 2008-11-19 16:39:55 +0200 (Wed, 19 Nov 2008) | 1 line branches/zip: buf_LRU_free_block(): Clarify the function comment. ------------------------------------------------------------------------ r3144 | marko | 2008-11-20 11:39:49 +0200 (Thu, 20 Nov 2008) | 2 lines branches/zip: rec_get_nth_field_offs_old(): Add UNIV_UNLIKELY hints to assertion-like tests. ------------------------------------------------------------------------ r3145 | marko | 2008-11-20 12:22:40 +0200 (Thu, 20 Nov 2008) | 20 lines branches/zip: Always check for "row too large" when executing SQL to create an index or table. We have to skip this check when loading table definitions from the data dictionary, because we could otherwise refuse to load old tables (even uncompressed ones). This addresses Issue #119. The first "row too large" check was implemented in MySQL 5.0.3 to address MySQL Bug #5682. In the InnoDB Plugin 1.0.2, a more accurate check was implemented in innodb_strict_mode. We now make the check unconditional. dict_create_index_step(): Pass strict=TRUE to dict_index_add_to_cache(). trx_is_strict(), thd_is_strict(): Remove. innodb-zip.test: Test in innodb_strict_mode=OFF. innodb_bug36169.test: Ensure that none of the tables can be created. rb://56 approved by Sunny Bains. ------------------------------------------------------------------------ r3148 | marko | 2008-11-20 13:27:27 +0200 (Thu, 20 Nov 2008) | 3 lines branches/zip: rec_print_old(), rec_print_comp(): Dump each field in a separate line, so that the dumps can be read and compared more easily. ------------------------------------------------------------------------	2008-11-20 11:53:53 +00:00
marko	c1d4665514	branches/innodb+: Merge revisions 2867:2986 from branches/zip: ... ------------------------------------------------------------------------ r2867 | marko | 2008-10-24 10:24:17 +0300 (Fri, 24 Oct 2008) | 2 lines branches/zip: ChangeLog: Document r2763, r2794, r2683, r2799, r2809, r2866. ------------------------------------------------------------------------ r2869 | vasil | 2008-10-24 11:14:16 +0300 (Fri, 24 Oct 2008) | 4 lines branches/zip: White space cleanup in ChangeLog ------------------------------------------------------------------------ r2870 | vasil | 2008-10-24 13:36:14 +0300 (Fri, 24 Oct 2008) | 8 lines branches/zip: Remove a statement that causes the innodb-index test to fail. The change in behavior was introduced in MySQL BZR-r2738. Suggested by: Marko ------------------------------------------------------------------------ r2871 | vasil | 2008-10-24 13:48:38 +0300 (Fri, 24 Oct 2008) | 5 lines branches/zip: Adjust mysql-test/patches/innodb-index.diff after the change to mysql-test/innodb-index.(test|result) in r2870. ------------------------------------------------------------------------ r2878 | calvin | 2008-10-27 11:05:42 +0200 (Mon, 27 Oct 2008) | 8 lines branches/zip: port the fix of Bug#19424 - InnoDB: Possibly a memory overrun of the buffer being freed with 64-bit Microsoft Visual C++. The changed file: CMakeLists.txt: Removing Win64 compiler optimizations for all innodb/mem/* files. ------------------------------------------------------------------------ r2884 | vasil | 2008-10-27 11:48:46 +0200 (Mon, 27 Oct 2008) | 7 lines branches/zip: ChangeLog: Add entry for the fix of Bug#19424 InnoDB: Possibly a memory overrun of the buffer being freed (64-bit Visual C) ------------------------------------------------------------------------ r2886 | calvin | 2008-10-27 22:39:11 +0200 (Mon, 27 Oct 2008) | 8 lines branches/zip: This patch is to solve the issue that file handles can not cross DLL/EXE boundaries on Windows. In builtin InnoDB, it makes call to MySQL server for creating tmp files. innobase_mysql_tmpfile is now rewritten for the plugin. rb://5 Approved by: Marko ------------------------------------------------------------------------ r2887 | calvin | 2008-10-27 22:48:29 +0200 (Mon, 27 Oct 2008) | 44 lines branches/zip: implement the delayloading of externals for the plugin on Windows, which includes: * Load mysqld.map and insert all symbol/address pairs into hash for quick access * Resolves all external data variables. The delayloading mechanism in MSVC does not support automatic imports of data variables. A workaround is to explicitly handle the data import using the delay loader during the initialization of the plugin. * Resolves all external functions during run-time, by implementing the delayed loading helper function delayLoadHelper2, which is called by run-time as well as HrLoadAllImportsForDll. The delay loader reuses the hash implementation in InnoDB. The normal hash_create (in hash0hash.c) creates hash tables in buffer pool. But the delay loader is invoked before the engine is initialized, and buffer pools are not ready yet. Instead, the delay loader has its own implementation of hash_create() and hash_table_free(), called wdl_hash_create() and wdl_hash_table_free(). This patch should be used with other two patches in order to build a dynamically linked plugin on Windows: * patch for tmpfile functions (r2886) * patch for "build" files (to be committed) The list of file changed: handler/handler0vars.h: new file, defines a list of external data variables (no external functions). handler/win_delay_loader.cc: new file, the implementation of the delay loader for Windows plugin. handler/ha_innodb.cc: add a header file, and changes for copying the system variables. handler/handler0alter.cc: add a header file handler/i_s.cc: add a header file rb://27 Reviewed by: Sunny, Marko Approved by: Sunny ------------------------------------------------------------------------ r2888 | calvin | 2008-10-28 01:51:49 +0200 (Tue, 28 Oct 2008) | 25 lines branches/zip: for building dynamic plugin on Windows, ha_innodb.dll, when INNODB_DYNAMIC_PLUGIN is specified. The changes are: CMakeLists.txt: add project ha_innodb for dynamic plugin on Windows. ha_innodb depends on project mysqld. ha_innodb.def: a new file with standard exports for a dynamic plugin. Two new files will be added: * sql/mysqld.def: .def file for 32-bit compiler * sql/mysqld_x64.def: .def file for x64 compiler It is also required to apply a patch to the MySQL source tree. The patch is described in win-plugin/README: win-plugin/win-plugin.diff - a patch to be applied to MySQL source tree. When applied, the following files will be modified: * CMakeLists.txt: add INNODB_DYNAMIC_PLUGIN and _USE_32BIT_TIME_T * sql/CMakeLists.txt: add mysqld.def or mysqld_x64.def for mysqld * win/configure.js: add INNODB_DYNAMIC_PLUGIN * win/build-vs71.bat: provide an option to specify CMAKE_BUILD_TYPE * win/build-vs8.bat: provide an option to specify CMAKE_BUILD_TYPE * win/build-vs8_x64.bat: provide an option to specify CMAKE_BUILD_TYPE ------------------------------------------------------------------------ r2894 | marko | 2008-10-28 08:36:39 +0200 (Tue, 28 Oct 2008) | 4 lines branches/zip: dict_str_starts_with_keyword(): Removed this unused function. Spotted by Sunny. ------------------------------------------------------------------------ r2895 | vasil | 2008-10-28 08:40:45 +0200 (Tue, 28 Oct 2008) | 6 lines branches/zip: ChangeLog: add entry for the Windows plugin. ------------------------------------------------------------------------ r2917 | marko | 2008-10-28 23:53:23 +0200 (Tue, 28 Oct 2008) | 3 lines branches/zip: innodb_plugin_init(): Do not copy session variables, even when the variable is a global variable in the built-in InnoDB. ------------------------------------------------------------------------ r2918 | calvin | 2008-10-29 00:08:11 +0200 (Wed, 29 Oct 2008) | 2 lines branches/zip: fix a problem introduced in r2917 - dyn is not initialized. Move the check into for(). ------------------------------------------------------------------------ r2922 | calvin | 2008-10-29 08:29:01 +0200 (Wed, 29 Oct 2008) | 16 lines branches/zip: fix issue #102 - Windows plugin: resolve dbug functions during run-time. Implement wrapper functions in the plugin. The plugin will get the function entries from mysqld.exe during the init, and invoke the corresponding functions (in mysqld.exe). The list of functions are: _db_pargs_ _db_doprnt_ _db_enter_ _db_return_ _db_dump_ rb://38 Approved by: Marko ------------------------------------------------------------------------ r2923 | marko | 2008-10-29 09:52:30 +0200 (Wed, 29 Oct 2008) | 1 line branches/zip: ChangeLog: Mention Bug #27276. ------------------------------------------------------------------------ r2925 | calvin | 2008-10-29 10:09:41 +0200 (Wed, 29 Oct 2008) | 16 lines branches/zip: change function names in sql/mysqld.def in order to work with 5.1.29-rc. In 5.1.29, the following function names are changed: _hash_init hash_free hash_search hash_delete changed to _my_hash_init my_hash_free my_hash_search my_hash_delete Approved by: Marko (on IM) ------------------------------------------------------------------------ r2927 | marko | 2008-10-29 11:43:23 +0200 (Wed, 29 Oct 2008) | 4 lines branches/zip: ha_innodb.cc: Make some functions static, so that they will not be compiled as weak global symbols. These functions must not be redirected to the built-in InnoDB. ------------------------------------------------------------------------ r2928 | michael | 2008-10-29 19:20:10 +0200 (Wed, 29 Oct 2008) | 4 lines Remove unnecessary assert Approved by: Heikki, over IM ------------------------------------------------------------------------ r2930 | marko | 2008-10-29 21:39:24 +0200 (Wed, 29 Oct 2008) | 33 lines branches/zip: Merge revisions 2854:2929 from branches/5.1, except r2924, which was merged from branches/zip r2866 to branches/5.1 and except r2879 which was merged separately by Calvin: ------------------------------------------------------------------------ r2902 | vasil | 2008-10-28 12:10:25 +0200 (Tue, 28 Oct 2008) | 10 lines branches/5.1: Fix Bug#38189 innodb_stats_on_metadata missing Make the variable innodb_stats_on_metadata visible to the users and also settable at runtime. Previously it was only "visible" as a command line startup option to mysqld. Approved by: Marko (https://svn.innodb.com/rb/r/36) ------------------------------------------------------------------------ r2929 | marko | 2008-10-29 21:26:14 +0200 (Wed, 29 Oct 2008) | 13 lines branches/5.1: dtype_get_sql_null_size(): return the correct storage size of a SQL NULL column. (Bug #40369) When MySQL Bug #20877 was fixed in r834, this function was accidentally modified to return 0 or 1. Apparently, the only impact of this bug is that fixed-length columns cannot be updated in-place from or to SQL NULL, even in ROW_FORMAT=REDUNDANT. After this fix, fixed-length columns in ROW_FORMAT=REDUNDANT will have a constant storage size as they should, no matter if NULL or non-NULL. The bug caused fixed-length NULL columns to occupy 1 byte. rb://37 approved by Heikki over IM. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r2931 | vasil | 2008-10-29 22:10:40 +0200 (Wed, 29 Oct 2008) | 4 lines branches/zip: Add 2 ChangeLog entries for the 2 bugfixes that were merged from branches/5.1. ------------------------------------------------------------------------ r2935 | vasil | 2008-10-30 12:17:23 +0200 (Thu, 30 Oct 2008) | 17 lines branches/zip: Fix "Bug#40360 Binlog related errors with binlog off" in InnoDB code in order to have a Bug#40360-free InnoDB Plugin 1.0.2. The fix does check whether binary logging is enabled in MySQL by accessing the opt_bin_log global variable that is defined in sql/mysqld.cc. In case MySQL does develop another solution to this via Bug#40360 then we can revert this patch (except the mysql-tests). The windows-plugin part of this fix will be committed as a separate commit to ease eventual merge into branches/5.1 [note from the future: the separate commit went into r2936]. Approved by: Marko (https://svn.innodb.com/rb/r/39) ------------------------------------------------------------------------ r2936 | vasil | 2008-10-30 12:24:09 +0200 (Thu, 30 Oct 2008) | 7 lines branches/zip: Followup to r2935: add the Windows Delay Loader stuff for the MySQL variable that we are accessing. If someday we have another solution for Bug#40360 Binlog related errors with binlog off then this should also be reverted. ------------------------------------------------------------------------ r2937 | vasil | 2008-10-30 12:28:47 +0200 (Thu, 30 Oct 2008) | 4 lines branches/zip: Add ChangeLog entry for Bug#40360 Binlog related errors with binlog off ------------------------------------------------------------------------ r2938 | vasil | 2008-10-30 12:33:28 +0200 (Thu, 30 Oct 2008) | 5 lines branches/zip: Non-functional change: convert handler/handler0vars.h and handler/win_delay_loader.cc from \r\n (dos) to \n (unix) line terminators. ------------------------------------------------------------------------ r2939 | marko | 2008-10-30 12:38:18 +0200 (Thu, 30 Oct 2008) | 2 lines branches/zip: Set svn:eol-style native on some recently added text files. ------------------------------------------------------------------------ r2940 | marko | 2008-10-30 12:46:21 +0200 (Thu, 30 Oct 2008) | 1 line branches/zip: ChangeLog, ha_innodb.def: Set svn:eol-style native ------------------------------------------------------------------------ r2941 | vasil | 2008-10-30 19:34:27 +0200 (Thu, 30 Oct 2008) | 4 lines branches/zip: Increment the InnoDB Plugin version from 1.0.1 to 1.0.2. ------------------------------------------------------------------------ r2943 | sunny | 2008-10-31 09:40:29 +0200 (Fri, 31 Oct 2008) | 15 lines branches/zip: 1. We add a vector of locks to trx_t. This array contains the autoinc locks granted to a transaction. There is one per table. 2. We enforce releasing of these locks in the reverse order from the one in which they are acquired. The assumption is that since the AUTOINC locks are statement level locks. Nested statements introduced by triggers are stacked it should hold. There was some cleanup done to the vector code too by adding const and some new functions. Rename dict_table_t::auto_inc_lock to autoinc_lock. Fix Bug#26316 Triggers create duplicate entries on auto-increment columns rb://22 ------------------------------------------------------------------------ r2944 | vasil | 2008-10-31 09:44:16 +0200 (Fri, 31 Oct 2008) | 12 lines branches/zip: Revert our temporary fix for "Bug#40360 Binlog related errors with binlog off" (r2935, r2936) and deploy MySQL's one, but put the function mysql_bin_log_is_engaged() inside mysql_addons.cc instead of in mysql's log.cc and use a different name for it so there is no collision when MySQL adds this function in log.cc. [note from the future: the windows part of this patch went into r2947] Approved by: Marko (https://svn.innodb.com/rb/r/41/) ------------------------------------------------------------------------ r2945 | sunny | 2008-10-31 09:44:45 +0200 (Fri, 31 Oct 2008) | 2 lines branches/zip: Update ChangeLog with r2943 info. ------------------------------------------------------------------------ r2946 | marko | 2008-10-31 10:18:47 +0200 (Fri, 31 Oct 2008) | 2 lines branches/zip: Revert the unintended change to univ.i that was made in r2943. ------------------------------------------------------------------------ r2947 | calvin | 2008-10-31 10:38:26 +0200 (Fri, 31 Oct 2008) | 6 lines branches/zip: Windows plugin part of r2944 r2944 has reference to mysql_bin_log.is_open(), which is new in InnoDB. Add two new entries and remove one duplicate in mysqld.def & mysqld_x64.def. ------------------------------------------------------------------------ r2948 | vasil | 2008-10-31 11:39:07 +0200 (Fri, 31 Oct 2008) | 9 lines branches/zip: Fix Mantis issue#106 plugin init error:InnoDB: stats_on_metadata in static InnoDB (flags=0x2401) differs from stats_on_metadata in dynamic InnoDB (fl Ignore the NOSYSVAR flag in addition to ignoring the READONLY flag. Approved by: Marko (https://svn.innodb.com/rb/r/42/) ------------------------------------------------------------------------ r2949 | vasil | 2008-10-31 11:47:56 +0200 (Fri, 31 Oct 2008) | 4 lines branches/zip: White-space cleanup in ChangeLog. ------------------------------------------------------------------------ r2951 | marko | 2008-10-31 14:21:43 +0200 (Fri, 31 Oct 2008) | 4 lines branches/zip: scripts/install_innodb_plugins_win.sql: New script, for installing the InnoDB plugins in Windows. Copied from scripts/install_innodb_plugins.sql. ------------------------------------------------------------------------ r2954 | calvin | 2008-11-04 09:15:26 +0200 (Tue, 04 Nov 2008) | 8 lines branches/zip: ignore the failure when builtin_innobase_plugin is not available. External variable builtin_innobase_plugin is not available when mysqld does not have a builtin InnoDB. The init of the Windows plugin should not fail in this case. Approved by: Marko (on IM) ------------------------------------------------------------------------ r2955 | calvin | 2008-11-04 12:43:14 +0200 (Tue, 04 Nov 2008) | 11 lines branches/zip: windows plugin - fix references to array variables. This problem surfaced when running new test innodb_bug40360.test. Both tx_isolation_names and binlog_format_names are name arrays, and should be defined as wdl_tx_isolation_names and wdl_binlog_format_names, not *wdl_tx_isolation_names and *wdl_binlog_format_names. Another array variable is all_charsets, which is already correctly defined. Approved by: Marko (on IM) ------------------------------------------------------------------------ r2986 | marko | 2008-11-11 09:28:37 +0200 (Tue, 11 Nov 2008) | 11 lines branches/zip: ha_innobase::create(): Remove the dependences on DICT_TF_ZSSIZE_MAX, so that the code can be compiled with a different uncompressed page size by redefining UNIV_PAGE_SIZE_SHIFT in univ.i. Currently, the allowed values are 12, 13, or 14 (4k, 8k, 16k). Make the default compressed page size half the uncompressed page size. The previous default was 8 kilobytes, which is the same when compiling with the default 16k uncompressed page size. rb://50 approved by Pekka Lampio and Sunny Bains. ------------------------------------------------------------------------	2008-11-11 10:21:16 +00:00
marko	c5fa1c20be	branches/innodb+: Merge 2637:2660 from branches/zip.	2008-09-22 07:57:34 +00:00
inaam	a48c8a2878	branches/innodb+: Merge revisions 2344:2454 from branches/zip	2008-05-14 15:43:19 +00:00
marko	788650088b	branches/zip: Add a UNIV_INTERN qualifier to every global function declaration ... in *.h files, so that the function signatures in the *.h and *.c files fully match each other. ut_dulint_sort(): Add a UNIV_INTERN qualifier also to the function definition.	2008-02-18 18:38:33 +00:00
marko	64c95da886	branches/zip: Fast index creation: Release locks on system tables before ... creating indexes. Lock the user table inside the user transaction. enum trx_dict_op: Remove TRX_OP_INDEX_MAY_WAIT. ha_innobase::add_index(): Lock the user tables within prebuilt->trx. Commit the data dictionary transaction before creating indexes. ha_innobase::final_drop_index(): Lock the user table within prebuilt->trx.	2008-01-25 14:26:07 +00:00
marko	d5c04aae8e	branches/zip: ha_innobase::final_drop_index(): Allocate a separate transaction ... for dropping the index trees, and set the dictionary operation flag, similar to what ha_innobase::add_index() does. This should ensure correct crash recovery.	2007-11-29 10:34:55 +00:00
vasil	69a8cc07a9	branches/zip: ... Add the transaction's weight to information_schema.innodb_trx table. Suggested by: Ken Approved by: Heikki	2007-11-28 07:07:23 +00:00
marko	6807b7731f	branches/zip: trx_rollback_or_clean_all_without_sess(): Distinguish ... recovered transactions from new ones. Until r1594, they were distinguished by trx->sess == NULL. trx_t: Add the bitfield is_recovered. trx_lists_init_at_db_start(): Set trx->is_recovered. trx_create(): Initialize trx->is_recovered = 0. trx_print(): Display information about trx->is_recovered. trx_rollback_or_clean_all_without_sess(): Skip new transactions. Protect all accesses of trx_sys->trx_list with kernel_mutex. trx_roll_crash_recv_trx, trx_roll_max_undo_no, trx_roll_progress_printed_pct: Made these variables static.	2007-10-29 15:32:19 +00:00
marko	1561b414e1	branches/zip: Introduce two new dictionary operation modes for transactions. ... enum trx_dict_op: dictionary operation modes trx_get_dict_operation(), trx_set_dict_operation(): Accessors for trx->dict_operation. lock_table_enqueue_waiting(), lock_rec_enqueue_waiting(): Do not complain about lock waits if the dictionary mode is TRX_DICT_OP_INDEX_MAY_WAIT. row_merge_lock_table(): Remove the work-around for avoiding the warning in lock_table_enqueue_waiting(). trx_undo_mark_as_dict_operation(): Do not write trx->table_id to the undo log unless the dict_operation is TRX_DICT_OP_TABLE. ha_innobase::add_index(): Set the dict_operation mode initially to TRX_DICT_OP_INDEX_MAY_WAIT, then lock the table exclusively, and set the mode to TRX_DICT_OP_INDEX, and optionally to TRX_DICT_OP_TABLE when creating a temporary table.	2007-10-19 10:52:25 +00:00
inaam	22d5997dbc	branches/zip: Undo changes commited in r1832. ... These should have gone to branches/fts. Spotted by: Marko and Ken	2007-09-11 00:41:02 +00:00
inaam	24741ad8f7	branches/zip: Enabled group commit functionality with XA. ... Reviewed by: Heikki	2007-09-10 17:06:44 +00:00
marko	52a8928693	branches/zip: Simplify crash recovery in fast index creation. ... trx_t: Remove dict_undo_list and dict_redo_list. innobase_create_temporary_tablename(): Replace TEMP_TABLE_PREFIX with a table name suffix "#1" or "#2". In this way, the user can restore precious data, should anything go wrong. It is possible to reach an inconsistent state, because the creation, deletion and renaming of single-table tablespaces are not transactional. ut_print_namel(), fil_make_ibd_name(), innobase_rename_table(): Remove the special treatment of TEMP_TABLE_PREFIX. Introduce TEMP_INDEX_PREFIX == 0xff for temporary indexes. This byte cannot occur in index names since MySQL 4.1. However, it might have been possible to use this byte in MySQL 4.0. recv_recovery_from_checkpoint_finish(): Call the new function row_merge_drop_temp_indexes(), to drop all indexes whose name starts with the byte 0xff. row_merge_rename_indexes(): Renamed from row_merge_rename_index(). Remove the parameter "index". row_drop_table_for_mysql(): Unconditionally call trx_commit_for_mysql(). row_drop_table_for_mysql_no_commit(): Correct the function commit, based on the corrected comment of row_drop_table_for_mysql(). Rely on table->to_be_dropped instead of TEMP_TABLE_PREFIX. ha_innobase::add_index(): Simplify the control flow.	2007-09-05 10:18:03 +00:00
marko	faec4797c8	branches/zip: Merge 1664:1783 from trunk.	2007-08-30 09:21:25 +00:00
vasil	733ed4fb7c	branches/zip: Add trx_get_id() and trx_get_que_state_str() functions to ... retrieve trx_t's properties that will be exported in INFORMATION_SCHEMA tables. Approved by: Marko	2007-08-23 09:29:28 +00:00
marko	d1be7f720e	branches/zip: Remove trx->sync_cb. Call dict_rename_indexes() directly ... from ha_innobase::add_index(). dict_rename_indexes(): Remove the redundant parameter commit_flag.	2007-08-21 12:36:13 +00:00
marko	9be35934d7	branches/zip: Minor cleanup. ... trx_t: Change the type of error_info from void* to const dict_index_t*. trx_get_error_info(): Add const qualifier to trx_t*. Make this an inline function.	2007-08-15 06:53:34 +00:00
marko	d662c3c656	branches/zip: Merge 1575:1664 from trunk.	2007-08-01 11:18:43 +00:00
marko	681d9e9f00	branches/zip: trx_weight_cmp(): Add const qualifiers.	2007-08-01 08:01:47 +00:00
marko	12caeb9870	branches/zip: Initialize trx_dummy_sess only once. Require trx->sess to ... be set always. trx_rollback_active(): Split from trx_rollback_or_clean_all_without_sess(). row_undo_dictionary(): Do not return a value. Assert that all operations succeed. row_merge_drop_index(): Remove bogus comment about void return value. trx_dummy_sess: Move the declaration from trx0roll.h to trx0trx.h, because the variable is defined in trx0trx.c.	2007-06-21 12:02:29 +00:00
marko	5afcf2e864	branches/zip: trx_commit_for_mysql(): Call trx_start_if_not_started() earlier. ... Return DB_SUCCESS. Do not release and reacquire kernel_mutex.	2007-06-21 10:42:20 +00:00
marko	f29addba49	branches/zip: Enable calls to inlined InnoDB functions in ha_innodb.cc, ... now that all of InnoDB code is built from a single Makefile and it should not be possible to build the modules with mutually incompatible options. #define INSIDE_HA_INNOBASE_CC: Remove. srv_sizeof_trx_t_in_ha_innodb_cc: Remove. dict_table_get_low_noninlined(): Remove. This function was unused. Remove all _noninline functions. Remove the _noninline suffix from all function calls in ha_innodb.cc.	2007-06-20 08:26:26 +00:00
marko	d75e64f98a	branches/zip: Merge 1493:1533 from trunk. ... Make use of UT_BITS_IN_BYTES().	2007-05-29 08:48:16 +00:00
marko	e7284367dc	branches/zip: Merge revisions 1402:1493 from trunk. ... Remove mysql.patch, because the configuration parameter interface has changed.	2007-05-14 09:07:15 +00:00
marko	a47b9e64e6	branches/zip: Merge branches/fast-index-creation -r1413. ... Fix some bugs. The tests innodb and innodb-index fail, but that might be due to an old MySQL source tree being used.	2007-04-04 11:05:33 +00:00
marko	33c1125d55	branches/zip: Merge revisions 1322:1402 from trunk.	2007-04-02 05:39:41 +00:00
marko	5e9d893508	branches/zip: Replace ib_ulonglong with ib_uint64_t, since we want exactly ... 64 bits. "long long" might be longer than 64 bits on some systems.	2006-11-29 14:52:16 +00:00
marko	109570b94a	branches/zip: Introduce the unsigned 64-bit data type ib_ulonglong ... for log sequence numbers, to replace dulint.	2006-11-24 13:05:01 +00:00
marko	64f3cee67f	branches/zip: Merge revisions 720:765 from trunk and reindent the code ... as per revisions r763:765.	2006-08-29 09:30:31 +00:00
marko	645e56909f	branches/zip: Merge revisions 583:634 from trunk.	2006-06-13 20:23:26 +00:00
marko	450bbd7c3b	branches/zip: Merge revisions 265:459 from trunk.	2006-04-12 09:32:17 +00:00
marko	f40121415d	branches/zip: Merge revisions 200:236 from trunk.	2006-02-23 19:25:29 +00:00
osku	c307820962	Import 5.0 code.	2005-10-27 07:29:40 +00:00