While reading a binary log that is being used by a master or was not properly
closed, most likely due to a crash, the following warning message is being
printed out: "Warning: this binlog was not closed properly. Most probably mysqld
crashed writing it.". This was scaring our users as the message was not taking
into account the possibility of the file is being just used by the master.
To avoid unnecessarily scaring our users, we replace the original message by the
following one: Warning: "this binlog is either is use or was not closed properly.".
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
BEGIN/COMMIT/ROLLBACK was subject to replication db rules, and
caused the boundary of a transaction not recognized correctly
when these queries were ignored by the rules.
Fixed the problem by skipping replication db rules for these
statements.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
"freeing items"
The calculation of the table map log event in the event constructor
was one byte shorter than what would be actually written. This would
lead to a mismatch between the number of bytes written and the event
end_log_pos, causing bad event alignment in the binlog (corrupted
binlog) or in the transaction cache while fixing positions
(MYSQL_BIN_LOG::write_cache). This could lead to impossible to read
binlog or even infinite loops in MYSQL_BIN_LOG::write_cache.
This patch addresses this issue by correcting the expected event
length in the Table_map_log_event constructor, when the field metadata
size exceeds 255.
In the output from mysqlbinlog, incident log events were
represented as just a comment. Since the incident log event
represents an incident that could cause the contents of the
database to change without being logged to the binary log,
it means that if the SQL is applied to a server, it could
potentially lead to that the databases are out of sync.
In order to handle that, this patch adds the statement "RELOAD
DATABASE" to the SQL output for the incident log event. This will
require a DBA to edit the file and handle the case as apropriate
before applying the output to a server.
165 changesets with 23 conflicts:
Text conflict in mysql-test/r/lock_multi.result
Text conflict in mysql-test/t/lock_multi.test
Text conflict in mysql-test/t/mysqldump.test
Text conflict in sql/item_strfunc.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/parse_file.cc
Text conflict in sql/slave.cc
Text conflict in sql/sp.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.cc
Text conflict in sql/sql_crypt.cc
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_view.cc
Text conflict in storage/innobase/handler/ha_innodb.cc
Text conflict in storage/myisam/mi_packrec.c
Text conflict in tests/mysql_client_test.c
Updates to Innobase, taken from main 5.1:
bzr: ERROR: Some change isn't sane:
File mysql-test/r/innodb-semi-consistent.result is owned by Innobase and should not be updated.
File mysql-test/t/innodb-semi-consistent.test is owned by Innobase and should not be updated.
File storage/innobase/handler/ha_innodb.cc is owned by Innobase and should not be updated.
File storage/innobase/ibuf/ibuf0ibuf.c is owned by Innobase and should not be updated.
File storage/innobase/include/row0mysql.h is owned by Innobase and should not be updated.
File storage/innobase/include/srv0srv.h is owned by Innobase and should not be updated.
File storage/innobase/include/trx0trx.h is owned by Innobase and should not be updated.
File storage/innobase/include/trx0trx.ic is owned by Innobase and should not be updated.
File storage/innobase/lock/lock0lock.c is owned by Innobase and should not be updated.
File storage/innobase/page/page0cur.c is owned by Innobase and should not be updated.
File storage/innobase/row/row0mysql.c is owned by Innobase and should not be updated.
File storage/innobase/row/row0sel.c is owned by Innobase and should not be updated.
File storage/innobase/srv/srv0srv.c is owned by Innobase and should not be updated.
File storage/innobase/trx/trx0trx.c is owned by Innobase and should not be updated.
(Set env var 'ALLOW_UPDATE_INNOBASE_OWNED' to override.)
The rpl_binlog_corruption test case was inject failures, specifically,
incidents with invalid numbers to see if the replication was failing
gracefully. However, this test was causing the following warning message
in Valgrind: "Conditional jump or move depends on uninitialised value(s)"
The patch fixes the problem by correctly initializing the m_inicident
number.
Binlog the CREATE EVENT unless the created event been successfully dropped
Modified Query_log_event constructor to make sure that error_code
is not set to ER_SERVER_SHUTDOWN or ER_QUERY_INTERRUPTED errors
when NOT_KILLED
RBR was not considering the option --slave-skip-errors.
To fix the problem, we are reporting the ignored ERROR(s) as warnings thus avoiding
stopping the SQL Thread. Besides, it fixes the output of "SHOW VARIABLES LIKE
'slave_skip_errors'" which was showing nothing when the value "all" was assigned
to --slave-skip-errors.
@sql/log_event.cc
skipped rbr errors when the option skip-slave-errors is set.
@sql/slave.cc
fixed the output of for SHOW VARIABLES LIKE 'slave_skip_errors'"
@test-cases
fixed the output of rpl.rpl_idempotency
updated the test case rpl_skip_error
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
Bug#319 if while a non-transactional slave is replicating a transaction possible problem
It is impossible to roll back a mixed engines transaction when one of the engine is
non-transaction. In replication that fact is crucial because the slave can not safely
re-apply a transction that was interrupted with STOP SLAVE.
Fixed with making STOP SLAVE not be effective immediately in the case the current
group of replication events has modified a non-transaction table. In order for slave to leave
either the group needs finishing or the user issues KILL QUERY|CONNECTION slave_thread_id.
The issue happened to be two-fold.
The table map event was recorded into binlog having
an incorrect size when number of columns exceeded 251.
The Row-based event had incorrect recording and restoring m_width member within
the same as above conditions.
Fixed with correcting m_data_size and m_width.
Compiling with debug and assigning an invalid directory to --slave-load-tmpdir
was crashing the slave due to the following assertion DBUG_ASSERT(! is_set() ||
can_overwrite_status). This assertion assumes that a thread can change its
state once (i.e. ok,error, etc) before aborting, cleaning/resuming or completing
its execution unless the overwrite flag (i.e. can_overwrite_status) is true.
The Append_block_log_event::do_apply_event which is responsible for creating
temporary file(s) was not cleaning the thread state. Thus a failure while
trying to create a file in an invalid temporary directory was causing the crash.
To fix the problem we check if the temporary directory is valid before starting
the SQL Thread and reset the thread state before creating a file in
Append_block_log_event::do_apply_event.
The problem is issued because we set wrong start position and stop position of query string into binlog.
That two values are stored as part of head info of query string.
When we parse binlog, we first get position values then get the query string according position values.
But seems that two values are not calculated correctly after the parse of Yacc.
We don't want to touch so much of yacc because it may influence other codes.
So just add one space after 'INTO' key word when parsing.
This can easily resolve the problem.
If secure-file-priv was set on slave, it became unable to execute
LOAD DATA INFILE statements sent from master using mixed or
statement-based replication.
This patch fixes the issue by ignoring this security restriction
and checking if the files are created and read by the slave in the
--slave-load-tmpdir while executing the SQL Thread.
Signed integer format specifier forced to print the binlog header with server_id
negative if the unsigned value sets the sign-bit ON.
Fixed with correcting the specifier to correspond to typeof(server_id) == ulong.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
The bug happened because filtering-out a STMT_END_F-flagged event so that
the transaction COMMIT finds traces of incomplete statement commit.
Such situation is only possible with ndb circular replication. The filtered-out
rows event is one that immediately preceeds the COMMIT query event.
Fixed with deploying an the rows-log-event statement commit at executing
of the transaction COMMIT event.
Resources that were allocated by other than STMT_END_F-flagged event of
the last statement are clean up prior execution of the commit logics.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
It's a regression issue.
The reason of the bug appeared to be an error introduced into 5.1 source code.
A piece of code in Create_file_log_event::do_apply_event() did not have test
coverage which made make test and pb unaware.
Fixed with inverting the old value of the return value from
Create_file_log_event::do_apply_event().
The rpl test suite is extended with `rpl_cross_version' the file to hold
regression cases similar to the current.
The next number (AUTO_INCREMENT) field of the table for write
rows events are not initialized, and cause some engines (innodb)
not correctly update the tables's auto_increment value.
This patch fixed this problem by honor next number fields if present.
