But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
sql/sql_repl.cc:
The master send the Specific reasons instead of "error reading log entry" to the slave which is requesting a dump.
if an fatal error is returned by read_log_event function.
The test case rpl_do_grant fails sporadically on PB2 with "Access
denied for user 'create_rout_db'@'localhost' ...". Inspecting the
test case, one may find that if issues a GRANT on the master
connection and immediately after it creates two new connections
(one to the master and one to the slave) using the credentials
set with the GRANT.
Unfortunately, there is no synchronization between master and
slave after the grant and before the connections are
established. This can result in slave not having executed the
GRANT by the time the connection is attempted.
This patch fixes this by deploying a sync_slave_with_master
between the grant and the connections attempt.
The test case creates two temporary tables, then closes the
connection, waits for it to disconnect, then syncs the slave with
the master, checks for remaining opened temporary tables on
slave (which should be 0) and finally drops the used
database (mysqltest).
Unfortunately, sometimes, the test fails with one open table on
the slave. This seems to be caused by the fact that waiting for
the connection to be closed is not sufficient. The test needs to
wait for the DROP event to be logged and only then synchronize
the slave with the master and proceed with the check. This is
caused by the asynchronous nature of the disconnect wrt
binlogging of the DROP temporary table statement.
We fix this by deploying a call to wait_for_binlog_event.inc
on the test case, which makes execution to wait for the DROP
temp tables event before synchronizing master and slave.
If an EVENT is created without the DEFINER clause set explicitly or with it set
to CURRENT_USER, the master and slaves become inconsistent. This issue stems from
the fact that in both cases, the DEFINER is set to the CURRENT_USER of the current
thread. On the master, the CURRENT_USER is the mysqld's user, while on the slave,
the CURRENT_USER is empty for the SQL Thread which is responsible for executing
the statement.
To fix the problem, we do what follows. If the definer is not set explicitly,
a DEFINER clause is added when writing the query into binlog; if 'CURRENT_USER' is
used as the DEFINER, it is replaced with the value of the current user before
writing to binlog.
mysql-test/suite/rpl/r/rpl_create_if_not_exists.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_drop_if_exists.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_events.result:
Test result of Bug#44331
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/t/rpl_events.test:
Added test to verify if the definer is consistent between master and slave
when the event is created without the DEFINER clause set explicitly or the
DEFINER is set to CURRENT_USER
sql/events.cc:
The "create_query_string" function is added to create a new query string
for removing executable comments.
sql/sql_yacc.yy:
The remember_name token was added for recording the offset of EVENT_SYM.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
In STATEMENT based replication, a statement that failed on the master but that
updated non-transactional tables is written to binary log with the error code
appended to it. On the slave, the statement is executed and the same error is
expected. However, when an "expected error" did not happen on the slave and was
either ignored or was related to a concurrency issue on the master, the slave
did not rollback the effects of the statement and as such inconsistencies might
happen.
To fix the problem, we automatically rollback a statement that should have
failed on a slave but succeded and whose expected failure is either ignored or
stems from a concurrency issue on the master.
If the log_bin_trust_function_creators option is not defined, creating a stored
function requires either one of the modifiers DETERMINISTIC, NO SQL, or READS
SQL DATA. Executing a stored function should also follows the same rules if in
STATEMENT mode. However, this was not happening and a wrong error was being
printed out: ER_BINLOG_ROW_RBR_TO_SBR.
The patch makes the creation and execution compatible and prints out the correct
error ER_BINLOG_UNSAFE_ROUTINE when a stored function without one of the modifiers
above is executed in STATEMENT mode.
to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
Added test case.
sql/sql_table.cc:
When dropping table(s) in mixed mode and current statement
logging is ROW, builds an extra DROP TEMPORARY TABLE IF
EXISTS for temporary tables that are being dropped. Later,
it logs the extra drop statement.
binlog
The fix for BUG 43929 introduced a regression issue. In a nutshell, when a
statement that changes a non-transactional table fails, it is written to the
binary log with the error code appended. Unfortunately, after BUG 43929, this
failure was flushing the transactional chace causing mismatch between execution
and logging histories. To fix this issue, we avoid flushing the transactional
cache when a commit or rollback is not issued.
The "get_master_version_and_clock(...)" function in sql/slave.cc ignores
error and passes directly when queries fail, or queries succeed
but the result retrieved is empty.
The "get_master_version_and_clock(...)" function should try to reconnect master
if queries fail because of transient network problems, and fail otherwise.
The I/O thread should print a warning if the some system variables do not
exist on master (very old master)
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
Added test file for bug #45214
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Added test result for bug #45214
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added test file for bug #45214
sql/slave.cc:
The 'is_network_error()' function is added for checking if the error is caused by network.
Added a new return value (2) to 'get_master_version_and_clock()' function result set
to indicate transient network errors when queries fail, and the caller should
try to reconnect in this case.
There is an inconsistency with DROP DATABASE|TABLE|EVENT IF EXISTS and
CREATE DATABASE|TABLE|EVENT IF NOT EXISTS. DROP IF EXISTS statements are
binlogged even if either the DB, TABLE or EVENT does not exist. In
contrast, Only the CREATE EVENT IF NOT EXISTS is binlogged when the EVENT
exists.
This patch fixes the following cases for all the replication formats:
CREATE DATABASE IF NOT EXISTS.
CREATE TABLE IF NOT EXISTS,
CREATE TABLE IF NOT EXISTS ... LIKE,
CREAET TABLE IF NOT EXISTS ... SELECT.
sql/sql_insert.cc:
Part of the code was moved from the create_table_from_items to select_create::prepare.
When replication is row based, CREATE TABLE IF NOT EXISTS.. SELECT is binlogged if the table exists.
Had attempted to disable this test on Windows only, but the nature of this bug
does not allow for this. The master.opt file is processed before anything in
in the actual test. As a result, we must use disabled.def files to ensure
these tests are skipped on the problematic platforms.
Removed Windows-only code and updated the proper disabled.def files accordingly.
timeout
In STMT and MIXED modes, a statement that changes both non-transactional and
transactional tables must be written to the binary log whenever there are
changes to non-transactional tables. This means that the statement gets into the
binary log even when the changes to the transactional tables fail. In particular
, in the presence of a failure such statement is annotated with the error number
and wrapped in a begin/rollback. On the slave, while applying the statement, it
is expected the same failure and the rollback prevents the transactional changes
to be persisted.
Unfortunately, statements that fail due to concurrency issues (e.g. deadlocks,
timeouts) are logged in the same way causing the slave to stop as the statements
are applied sequentially by the SQL Thread. To fix this bug, we automatically
ignore concurrency failures on the slave. Specifically, the following failures
are ignored: ER_LOCK_WAIT_TIMEOUT, ER_LOCK_DEADLOCK and ER_XA_RBDEADLOCK.
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
Disabling these two tests as they are affected by this bug / causing PB2 failures
on Windows platforms. Can always disable via include/not_windows.inc if
the bug fix looks like it will take some time.
1. Replace waiting of SQL thread stop by waiting of SQL error on slave and stopped
SQL thread.
2. Remove debug code because it already implemented in MTR2.
Respectively, replaced "--exec diff" by "--diff_files" which is a mysqltest command to run a
non-operating system specific diff. Removed the file rpl_000015-slave.sh as it is not
necessary in the new MTR.
In order to define the --slave-load-tmpdir, the init_relay_log_file()
was calling fn_format(MY_PACK_FILENAME) which internally was indirectly
calling strmov_overlapp() (through pack_dirname) and the following
warning message was being printed out while running in Valgrind:
"source and destination overlap in strcpy".
We fixed the issue by removing the flag MY_PACK_FILENAME as it was not
necessary. In a nutshell, with this flag the function fn_format() tried
to replace a directory by either "~", "." or "..". However, we wanted
exactly to remove such strings.
In this patch, we also refactored the functions init_relay_log_file()
and check_temp_dir(). The former was refactored to call the fn_format()
with the flag MY_SAFE_PATH along with the MY_RETURN_REAL_PATH, in order
to avoid issues with long directories and return an absolute path,
respectively. The flag MY_SAFE_UNPACK_FILENAME was removed too as it was
responsible for removing "~", "." or ".." only from the file parameter
and we wanted to remove such strings from the directory parameter in
the fn_format(). This result is stored in an rli variable, which is then
processed by the other function in order to verify if the directory exists
and if we are able to create files in it.
mysql-test/suite/rpl/t/rpl_slave_load_tmpdir_not_exist.test:
Changed the output to make it consistent among different runs.
mysys/mf_format.c:
Replaced a return for DBUG_RETURN.
Bug#319 if while a non-transactional slave is replicating a transaction possible problem
only testing related: addressing reviewers' comments.
mysql-test/suite/bugs/r/rpl_bug38205.result:
new results.
mysql-test/suite/bugs/t/rpl_bug38205.test:
changing output per reviewer's offering.
mysql-test/suite/rpl/r/rpl_start_stop_slave.result:
new results.
mysql-test/suite/rpl/t/rpl_start_stop_slave.test:
refining tests for Bug #38205, Bug#319 to start slave with the necessary synchronization;
changing output per reviewer's offering;
removing redundant wait for stop.
The result set for multi-row statements is not the same between STMT and
RBR and among different versions. Thus to avoid test failures, we are not
printing out such result sets. Note, however, that this does not have
impact on coverage and accuracy since the execution is able to continue
without further issues when an error is found on the master and such error
is set to be skipped.
