We found that there are some tests that are not cleaning
up properly:
1. rpl_tmp_table_and_DDL
2. rpl_do_grant
3. rpl_sync
For #1 and #2 we found that the slave would not, for some
cases, replicate all the instructions the master processed
in the cleanup section. We fix these by deploying some
synchronization commands in the test cases so that slave
processes all clean up instructions.
As for #3, this is tracked as part of another bug
(BUG@50442).
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
mysql-test/suite/parts/r/partition_innodb_status_file.result:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test result file
mysql-test/suite/parts/t/partition_innodb_status_file-master.opt:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test opt file
mysql-test/suite/parts/t/partition_innodb_status_file.test:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test.
Note that the innodb monitor thread only runs every 15 seconds, so this
test will take at least 15 seconds, so I have moved it to the parts suite.
sql/sql_table.cc:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Using thd safe ER macro.
sql/unireg.h:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Added ER macros for use with specified thd pointer.
As part of BUG@39934 fix, the public:
- THD::current_stmt_binlog_row_based
variable had been removed and replaced by a private variable:
- THD::current_stmt_binlog_format.
THD was refactored and some modifiers and accessors were
implemented for the new variable.
However, due to a bad merge, the
THD::current_stmt_binlog_row_based variable is back as a public
member of THD. This in itself is already potentially
harmful. What's even worse is that while merging some more
patches and resolving conflicts, the variable started being used
again, which is obviously wrong.
To fix this we:
1. remove the extraneous variable from sql_class.h
2. revert a bad merge for BUG#49132
3. merge BUG#49132 properly again (actually, making use of the
cset used to merge the original patch to mysql-pe).
fails in PB sporadically)
The IO thread can concurrently access the relay log IO_CACHE
while another thread is performing an FLUSH LOGS procedure.
FLUSH LOGS closes and reopens the relay log and while doing so it
(re)initializes its IO_CACHE. During this procedure the IO_CACHE
mutex is also reinitialized, which can cause problems if some
other thread (namely the IO THREAD) is concurrently accessing it
at the time .
This patch fixes the problem by extending the interface of the
flush_master_info function to also include a second paramater,
"need_relay_log_lock", stating whether the thread should grab the
relay log lock or not before actually flushing the relay log.
Also, IO thread now calls flush_master_info with this flag set
when it flushes master info with in the event read_event loop.
Finally, we also increase loop time in rpl_heartbeat_basic test
case, so that the number of calls to flush logs doubles, stressing
this part of the code a little more.
mysql-test/suite/rpl/t/rpl_heartbeat_basic.test:
Doubled the number of iterations on the FLUSH LOGS loop by
doubling the time available to perform all iterations.
sql/repl_failsafe.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.h:
Changed flush_master_info interface. Now takes a second parameter
instead of just one. The second parameter is: need_lock_relay_log.
sql/rpl_rli.cc:
Small fix in comment.
sql/slave.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/sql_repl.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Linux x86_64 debug
Two test cases fail because the suppression for the unsafe
warning needs to be updated (BUG@39934 refactored this part and
these changes are only in mysql-next-mr - this is why we notice
them now when merging in next-mr). This is the case for
rpl_nondeterministic_functions and rpl_misc_functions test
cases. rpl_stm_binlog_direct test case is not needed in version >
5.1. The rpl_heartbeat_basic test case fails because patch for
BUG@50397 removed the CHANGE MASTER in the slave that would set
it's period to 1/10 of the master. This would cause the test
assertion to fail.
The fixes for the issues described above are:
- rpl_misc_functions - updated suppression message
- rpl_nondeterministic_functions - updated suppression message
- rpl_stm_binlog_direct - removed the test case (it is not
needed in versions > 5.1)
- rpl_heartbeat_basic - deployed instruction:
CHANGE MASTER TO MASTER_HEARTBEAT_PERIOD=0.1;
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
The root cause of the crash is that a TranxNode is freed before it is used.
A TranxNode is allocated and inserted into the active list each time
a log event is written and flushed into the binlog file.
The memory for TranxNode is allocated with thd_alloc and will be freed
at the end of the statement. The after_commit/after_rollback callback
was supposed to be called before the end of each statement and remove the node from
the active list. However this assumption is not correct in all cases(e.g. call
'CREATE TEMPORARY TABLE myisam_t SELECT * FROM innodb_t' in a transaction
and delete all temporary tables automatically when a session closed),
and can cause the memory allocated for TranxNode be freed
before it was removed from the active list. So The TranxNode pointer in the active
list would become a wild pointer and cause the crash.
After this patch, We have a class called a TranxNodeAllocate which manages the memory
for allocating and freeing TranxNode. It uses my_malloc to allocate memory.
sql/rpl_handler.cc:
params are not initialized.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
The auto-inc unsafe warning makes sense even though it's just
one auto-inc table could be involved via a trigger or a stored
function.
However its content was not updated by bug@45677 fixes continuing to mention
two tables whereas the fixes refined semantics of replication of auto_increment
in stored routine.
Fixed with updating the error message, renaming the error and an internal unsafe-condition
constants.
A documentation notice
======================
Inserting into an autoincrement column in a stored function or a trigger
is unsafe for replication.
Even with just one autoincrement column, if the routine is invoked more than
once slave is not guaranteed to execute the statement graph same way as
the master.
And since it's impossible to estimate how many times a routine can be invoked at
the query pre-execution phase (see lock_tables), the statement is marked
pessimistically unsafe.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
results updated to include the expected unsafe warning.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
regression test for bug#50192 to diplaying the unsafe warning comes out to the user warning stack.
sql/share/errmsg-utf8.txt:
Updating the auto-inc unsafe message to correspond to bug@45677 fixes' new sematics.
sql/share/errmsg.txt:
Updating the auto-inc unsafe message to correspond to bug@45677 fixes' new sematics.
sql/sql_base.cc:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics.
sql/sql_lex.cc:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics.
sql/sql_lex.h:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics
and description comments.
