Remove alter_algorithm but keep the variable as no-op (with a warning).
The reasons for removing alter_algorithm are:
- alter_algorithm was introduced as a replacement for the
old_alter_table that was used to force the usage of the original
alter table algorithm (copy) in the cases where the new alter
algorithm did not work. The new option was added as a way to force
the usage of a specific algorithm when it should instead have made
it possible to disable algorithms that would not work for some
reason.
- alter_algorithm introduced some cases where ALTER TABLE would not
work without specifying the ALGORITHM=XXX option together with
ALTER TABLE.
- Having different values of alter_algorithm on master and slave could
cause slave to stop unexpectedly.
- ALTER TABLE FORCE, as used by mariadb-upgrade, would not always work
if alter_algorithm was set for the server.
- As part of the MDEV-33449 "improving repair of tables" it become
clear that alter- algorithm made it harder to provide a better and
more consistent ALTER TABLE FORCE and REPAIR TABLE and it would be
better to remove it.
This patch extends the timestamp from
2038-01-19 03:14:07.999999 to 2106-02-07 06:28:15.999999
for 64 bit hardware and OS where 'long' is 64 bits.
This is true for 64 bit Linux but not for Windows.
This is done by treating the 32 bit stored int as unsigned instead of
signed. This is safe as MariaDB has never accepted dates before the epoch
(1970).
The benefit of this approach that for normal timestamp the storage is
compatible with earlier version.
However for tables using system versioning we before stored a
timestamp with the year 2038 as the 'max timestamp', which is used to
detect current values. This patch stores the new 2106 year max value
as the max timestamp. This means that old tables using system
versioning needs to be updated with mariadb-upgrade when moving them
to 11.4. That will be done in a separate commit.
- Slave_IO thread time is now reset between reading events. Before
this commit Slave_IO always showed "Waiting for master to send
event" and the time was from SLAVE START. Now it shows time since
reading last event.
This commit fixes sporadic failures in galera_3nodes_sr.GCF-336
test. The following changes have been made here:
1) A small addition to the test itself which should make
it more deterministic by waiting for non-primary state
before COMMIT;
2) More careful handling of the wsrep_ready variable in
the server code (it should always be protected with mutex).
No additional tests are required.
The slave IO thread sets MYSQL_SET_CHARSET_DIR. The code for this option
however is not thread-safe in sql-common/client.c. The value set is
temporarily written to mysys global variable `charsets-dir` and can be seen
by other threads running in parallel, which can result in use-after-free
error.
Problem was visible as random failures of test cases in suite multi_source
with Valgrind or MSAN.
Work-around by not setting this option for slave connect, it is redundant
anyway as it is just setting the default value.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This patch also fixes:
MDEV-33050 Build-in schemas like oracle_schema are accent insensitive
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
- Removing the virtual function strnncoll() from MY_COLLATION_HANDLER
- Adding a wrapper function CHARSET_INFO::streq(), to compare
two strings for equality. For now it calls strnncoll() internally.
In the future it will turn into a virtual function.
- Adding new accent sensitive case insensitive collations:
- utf8mb4_general1400_as_ci
- utf8mb3_general1400_as_ci
They implement accent sensitive case insensitive comparison.
The weight of a character is equal to the code point of its
upper case variant. These collations use Unicode-14.0.0 casefolding data.
The result of
my_charset_utf8mb3_general1400_as_ci.strcoll()
is very close to the former
my_charset_utf8mb3_general_ci.strcasecmp()
There is only a difference in a couple dozen rare characters, because:
- the switch from "tolower" to "toupper" comparison, to make
utf8mb3_general1400_as_ci closer to utf8mb3_general_ci
- the switch from Unicode-3.0.0 to Unicode-14.0.0
This difference should be tolarable. See the list of affected
characters in the MDEV description.
Note, utf8mb4_general1400_as_ci correctly handles non-BMP characters!
Unlike utf8mb4_general_ci, it does not treat all BMP characters
as equal.
- Adding classes representing names of the file based database objects:
Lex_ident_db
Lex_ident_table
Lex_ident_trigger
Their comparison collation depends on the underlying
file system case sensitivity and on --lower-case-table-names
and can be either my_charset_bin or my_charset_utf8mb3_general1400_as_ci.
- Adding classes representing names of other database objects,
whose names have case insensitive comparison style,
using my_charset_utf8mb3_general1400_as_ci:
Lex_ident_column
Lex_ident_sys_var
Lex_ident_user_var
Lex_ident_sp_var
Lex_ident_ps
Lex_ident_i_s_table
Lex_ident_window
Lex_ident_func
Lex_ident_partition
Lex_ident_with_element
Lex_ident_rpl_filter
Lex_ident_master_info
Lex_ident_host
Lex_ident_locale
Lex_ident_plugin
Lex_ident_engine
Lex_ident_server
Lex_ident_savepoint
Lex_ident_charset
engine_option_value::Name
- All the mentioned Lex_ident_xxx classes implement a method streq():
if (ident1.streq(ident2))
do_equal();
This method works as a wrapper for CHARSET_INFO::streq().
- Changing a lot of "LEX_CSTRING name" to "Lex_ident_xxx name"
in class members and in function/method parameters.
- Replacing all calls like
system_charset_info->coll->strcasecmp(ident1, ident2)
to
ident1.streq(ident2)
- Taking advantage of the c++11 user defined literal operator
for LEX_CSTRING (see m_strings.h) and Lex_ident_xxx (see lex_ident.h)
data types. Use example:
const Lex_ident_column primary_key_name= "PRIMARY"_Lex_ident_column;
is now a shorter version of:
const Lex_ident_column primary_key_name=
Lex_ident_column({STRING_WITH_LEN("PRIMARY")});
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
https://jepsen.io/analyses/mysql-8.0.34 highlights that the
transaction isolation levels in the InnoDB storage engine do not
correspond to any widely accepted definitions, such as
"Generalized Isolation Level Definitions"
https://pmg.csail.mit.edu/papers/icde00.pdf
(PL-1 = READ UNCOMMITTED, PL-2 = READ COMMITTED, PL-2.99 = REPEATABLE READ,
PL-3 = SERIALIZABLE).
Only READ UNCOMMITTED in InnoDB seems to match the above definition.
The issue is that InnoDB does not detect write/write conflicts
(Section 4.4.3, Definition 6) in the above.
It appears that as soon as we implement write/write conflict detection
(SET SESSION innodb_snapshot_isolation=ON), the default isolation level
(SET TRANSACTION ISOLATION LEVEL REPEATABLE READ) will become
Snapshot Isolation (similar to Postgres), as defined in Section 4.2 of
"A Critique of ANSI SQL Isolation Levels", MSR-TR-95-51, June 1995
https://www.microsoft.com/en-us/research/wp-content/uploads/2016/02/tr-95-51.pdf
Locking reads inside InnoDB used to read the latest committed version,
ignoring what should actually be visible to the transaction.
The added test innodb.lock_isolation illustrates this. The statement
UPDATE t SET a=3 WHERE b=2;
is executed in a transaction that was started before a read view or
a snapshot of the current transaction was created, and committed before
the current transaction attempts to execute
UPDATE t SET b=3;
If SET innodb_snapshot_isolation=ON is in effect when the second
transaction was started, the second transaction will be aborted with
the error ER_CHECKREAD. By default (innodb_snapshot_isolation=OFF),
the second transaction would execute inconsistently, displaying an
incorrect SELECT COUNT(*) FROM t in its read view.
If innodb_snapshot_isolation=ON, if an attempt to acquire a lock on a
record that does not exist in the current read view is made, an error
DB_RECORD_CHANGED (HA_ERR_RECORD_CHANGED, ER_CHECKREAD) will
be raised. This error will be treated in the same way as a deadlock:
the transaction will be rolled back.
lock_clust_rec_read_check_and_lock(): If the current transaction has
a read view where the record is not visible and
innodb_snapshot_isolation=ON, fail before trying to acquire the lock.
row_sel_build_committed_vers_for_mysql(): If innodb_snapshot_isolation=ON,
disable the "semi-consistent read" logic that had been implemented by
myself on the directions of Heikki Tuuri in order to address
https://bugs.mysql.com/bug.php?id=3300 that was motivated by a customer
wanting UPDATE to skip locked rows that do not match the WHERE condition.
It looks like my changes were included in the MySQL 5.1.5
commit ad126d90e019f223470e73e1b2b528f9007c4532; at that time, employees
of Innobase Oy (a recent acquisition of Oracle) had lost write access to
the repository.
The only reason why we set innodb_snapshot_isolation=OFF by default is
backward compatibility with applications, such as the one that motivated
the implementation of "semi-consistent read" back in 2005. In a later
major release, we can default to innodb_snapshot_isolation=ON.
Thanks to Peter Alvaro, Kyle Kingsbury and Alexey Gotsman for their work
on https://github.com/jepsen-io/ and to Kyle and Alexey for explanations
and some testing of this fix.
Thanks to Vladislav Lesin for the initial test for MDEV-26643,
as well as reviewing these changes.
The patch for MDEV-15530 incorrectly added a column in the middle of SHOW
SLAVE STATUS output. This is wrong, as it breaks backwards compatibility
with existing applications and scripts. In this case, it even broke
mariadb-dump, which is included in the server source tree!
Revert the incorrect change, putting the new Replicate_Rewrite_DB at the end
of SHOW SLAVE STATUS output.
Add a testcase for the mariadb-dump --dump-slave wrong output problem. Also
add a testcase rpl.rpl_show_slave_status to hopefully prevent any future
incorrect additions to SHOW SLAVE STATUS.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Warnings are added to net_server.cc when
global_system_variables.log_warnings >= 4.
When the above condition holds then:
- All communication errors from net_serv.cc is also written to the
error log.
- In case of a of not being able to read or write a packet, a more
detailed error is given.
Other things:
- Added detection of slaves that has hangup to Ack_receiver::run()
- vio_close() is now first marking the socket closed before closing it.
The reason for this is to ensure that the connection that gets a read
error can check if the reason was that the socket was closed.
- Add a new state to vio to be able to detect if vio is acive, shutdown or
closed. This is used to detect if socket is closed by another thread.
- Testing of the new warnings is done in rpl_get_lock.test
- Suppress some of the new warnings in mtr to allow one to run some of
the tests with -mysqld=--log-warnings=4. All test in the 'rpl' suite
can now be run with this option.
- Ensure that global.log_warnings are restored at test end in a way
that allows one to use mtr --mysqld=--log-warnings=4.
Reviewed-by: <serg@mariadb.org>,<brandon.nesterenko@mariadb.com>
* type of mi->ssl_verify_server_cert must be my_bool, because it's
passed by address to mysql_options(), and the latter expects my_bool
* explicitly disable ssl in MYSQL if mi->ssl is 0
* remove dead code (`#ifdef NOT_USED`)
* remove useless casts and checks replacing empty strings with NULL
(new_VioSSLFd() does that internally)
rpl.rpl_seconds_behind_master_spike uses the DEBUG_SYNC mechanism to
count how many format descriptor events (FDEs) have been executed,
to attempt to pause on a specific relay log FDE after executing
transactions. However, depending on when the IO thread is stopped,
it can send an extra FDE before sending the transactions, forcing
the test to pause before executing any transactions, resulting in a
table not existing, that is attempted to be read for COUNT.
This patch fixes this by no longer counting FDEs, but rather by
programmatically waiting until the SQL thread has executed the
transaction and then automatically activating the DEBUG_SYNC point
to trigger at the next relay log FDE.
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
The previous patch for MDEV-10653 changes the rpl_parallel::workers_idle()
function to use Relay_log_info::last_inuse_relaylog to check for idle
workers. But the code was missing a NULL check. Also, there was one place
during SQL slave thread start which was missing mutex synchronisation when
updating inuse_relaylog.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
AKA rpl.rpl_parallel, binlog_encryption.rpl_parallel fails in
buildbot with timeout in include
A replication parallel worker thread can deadlock with another
connection running SHOW SLAVE STATUS. That is, if the replication
worker thread is in do_gco_wait() and is killed, it will already
hold the LOCK_parallel_entry, and during error reporting, try to
grab the err_lock. SHOW SLAVE STATUS, however, grabs these locks in
reverse order. It will initially grab the err_lock, and then try to
grab LOCK_parallel_entry. This leads to a deadlock when both threads
have grabbed their first lock without the second.
This patch implements the MDEV-31894 proposed fix to optimize the
workers_idle() check to compare the last in-use relay log’s
queued_count==dequeued_count for idleness. This removes the need for
workers_idle() to grab LOCK_parallel_entry, as these values are
atomically updated.
Huge thanks to Kristian Nielsen for diagnosing the problem!
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
This allows to simplify net_real_read() and net_real_write() a bit.
Removed some superfluous #ifdef/ifndef MYSQL_SERVER from net_serv.cc
The code always runs in server, either normal or embedded.
Dead code for switching socket between blocking and non-blocking modes,
is also removed.
Removed pthread_kill() with alarm signal that woke up main thread on
server shutdown. Used shutdown(2) on polling sockets instead, to the same
effect.
Removed yet another superstitious pthread_kill(), that ran on non-Windows
in terminate_slave_thread().
