NO ERRORS REPORTED
Problem:
=======
Errors from my_b_fill are ignored. MYSQL_BIN_LOG::write_cache
code assumes that 0 returned from my_b_fill always means
end-of-cache, but that is incorrect. It can result in error
and the error is ignored. Other callers of my_b_fill don't
check for error: my_b_copy_to_file, maybe my_b_gets.
Fix:
===
An error handler is already present to check the "cache"
error that is reported during "MYSQL_BIN_LOG::write_cache"
call. Hence error handlers are added for "my_b_copy_to_file"
and "my_b_gets".
During my_b_fill() function call, when the cache read fails
info->error= -1 is set. Hence a check for "info->error"
is added for the above to callers upon their return.
mysys/mf_iocache2.c:
Added a check for "cache->error" and simulation of cache read failure
mysys/my_read.c:
Simulation of read failure
sql/log_event.cc:
Added debug simulation
sql/sql_repl.cc:
Added a check for cache error
NO ERRORS REPORTED
Problem:
=======
Errors from my_b_fill are ignored. MYSQL_BIN_LOG::write_cache
code assumes that 0 returned from my_b_fill always means
end-of-cache, but that is incorrect. It can result in error
and the error is ignored. Other callers of my_b_fill don't
check for error: my_b_copy_to_file, maybe my_b_gets.
Fix:
===
An error handler is already present to check the "cache"
error that is reported during "MYSQL_BIN_LOG::write_cache"
call. Hence error handlers are added for "my_b_copy_to_file"
and "my_b_gets".
During my_b_fill() function call, when the cache read fails
info->error= -1 is set. Hence a check for "info->error"
is added for the above to callers upon their return.
Implement test case rpl_gtid_stop_start.test to test normal stop and restart
of master and slave mysqld servers.
Fix a couple bugs found with the test:
- When InnoDB is disabled (no XA), the binlog state was not read when master
mysqld starts.
- Remove old code that puts a bogus D-S-0 into the initial binlog state, it
is not correct in current design.
- Fix memory leak in gtid_find_binlog_file().
When slave requested to start at some GTID, and that GTID was the very
last event (within its replication domain) in some binlog file, we did
not allow the binlog dump thread on the master to start from the
beginning of a following binlog file. This is a problem, since the
binlog file containing the GTID is likely to be purged if the
replication domain is unused for long.
With this fix, if the Gtid list event at the start of a binlog file
contains exactly the GTID requested by the slave, we allow to start
the binlog dump thread from this file, taking care not to skip any
events from that domain in the file.
Fix MDEV-4329. When user does CHANGE MASTER TO
MASTER_GTID_POS='<explicit GTID state>', we check that this state
does not conflict with the binlog. But the code forgot to give an
error in the case where a domain was completely missing from the
requested position (eg. MASTER_GTID_POS='').
Fix MDEV-4278: Slave does not check that master understands GTID.
Now the slave will abort with a suitable error if an attempt is made to connect
with GTID to a master that does not support GTID.
Fix MDEV-4275 - I/O thread restart duplicates events in the relay log.
The first time we connect to master after CHANGE MASTER or restart, we connect
from the GTID position. But then subsequent reconnects or IO thread restarts
reconnect with the old-style file/offset binlog pos from where it left off at
last disconnect. This is necessary to avoid duplicate events in the relay
logs, as there is nothing that synchronises the SQL thread update of GTID
state (multiple threads in case of multi-source) with IO thread reconnects.
Test cases.
Some small cleanups and fixes.
Fix things so that a master can switch with MASTER_GTID_POS=AUTO to a slave
that was previously running with log_slave_updates=0, by looking into the
slave replication state on the master when the slave requests something not
present in the binlog.
Be a bit more strict about what position the slave can ask for, to avoid some
easy-to-hit misconfiguration errors.
Start over with seq_no counter when RESET MASTER.
Fix that CHANGE MASTER ... MASTER_GTID_POS="" works to start from the very
beginning of the binary log (with test case).
Fix that not finding the requested GTID position in master binlog results in
fatal error, not endless connect retry.
Remove the two-component form of GTID with implicit domain_id=0, as it
is likely to cause more confusion than help.
Give a better error for CHANGE MASTER ... MASTER_GTID_POS='gtid,gitd,...'
when two specified GTIDs have conflicting domain_id.
- Fix skipping initial MyISAM DML when connecting using GTID.
- Fix RESET MASTER not clearing in-memory binlog state.
- Fix not reading standalone flag in Gtid_log_event::peek().
- Fix skipping DDL that the slave has already seen when using GTID position.
- Fix that binlog_gtid_pos() (and hence slave connect) does not work
correctly in the very first binlog file (due to not logging empty
Gtid_list_log_event).
- Remove one instance of the stupid domain_id-0-is-implicit.
- Rename the confusing Gtid_Pos_Auto in SHOW SLAVE STATUS to Using_Gtid.
- Fix memory leak.
- Fix that slave GTID state was updated from the wrong place in the code,
causing random crashing and other misery.
- Fix updates to mysql.rpl_slave_state to not go to binlog (this would cause
duplicate key errors on the slave and is generally the wrong thing to do).
In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.
Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.
In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.
Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.
Implement binlog_gtid_pos() function. This will be used so that
the slave can obtain the gtid position automatically from first
connect with old-style position - then MASTER_GTID_POS=AUTO will
work the next time. Can also be used by mysqldump --master-data
to give the current gtid position directly.
When CHANGE MASTER fails, it may or may not have already added
the Master_info * to the index. Implement logic that properly
handles removal and freeing in both cases.
FROM MYSQL_BINLOG_SEND
As part Bug #11747416 A DISK FULL MAKES BINARY LOG CORRUPT,
reading the variable "binlog_can_be_corrupted" was removed
In the existing code the value of this variable is only set,
never read. And also this issue causing compiler warnings.
So the variable is completely redundant and should be removed.
sql/sql_repl.cc:
Removing dead code
FROM MYSQL_BINLOG_SEND
As part Bug #11747416 A DISK FULL MAKES BINARY LOG CORRUPT,
reading the variable "binlog_can_be_corrupted" was removed
In the existing code the value of this variable is only set,
never read. And also this issue causing compiler warnings.
So the variable is completely redundant and should be removed.
Give error for wrong parameters to CHANGE MASTER
Extend MASTER_PASSWORD and MASTER_HOST lengths
mysql-test/suite/rpl/r/rpl_password_boundaries.result:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/r/rpl_semi_sync.result:
Use different password than user name for better test coverage
mysql-test/suite/rpl/t/rpl_password_boundaries.test:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/t/rpl_semi_sync.test:
Use different password than user name for better test coverage
sql/rpl_mi.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
sql/sql_repl.cc:
Give error for wrong parameters to CHANGE MASTER
sql/sql_repl.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
Now slave can connect to master, sending start position as slave state
rather than old-style binlog name/position.
This enables to switch to a new master by changing just connection
information, replication slave GTID state ensures that slave starts
at the correct point in the new master.
MDEV-26: Global transaction id, partial commit
Change server_id to be a session variable.
User with SUPER can set it to binlog with different server_id.
Implement backward-compatible ::server_id mirror for plugins.
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
