mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Analysis:
The fix for lp:944706 introduces early subquery optimization.
While a subquery is being optimized some of its predicates may be
removed. In the test case, the EXISTS subquery is constant, and is
evaluated to TRUE. As a result the whole OR is TRUE, and thus the
correlated condition "b = alias1.b" is optimized away. The subquery
becomes non-correlated.
The subquery cache is designed to work only for correlated subqueries.
If constant subquery optimization is disallowed, then the constant
subquery is not evaluated, the subquery remains correlated, and its
execution is cached. As a result execution is fast.
However, when the constant subquery was optimized away, it was neither
cached by the subquery cache, nor it was cached by the internal subquery
caching. The latter was due to the fact that the subquery still appeared
as correlated to the subselect_XYZ_engine::exec methods, and they
re-executed the subquery on each call to Item_subselect::exec.
Solution:
The solution is to update the correlated status of the subquery after it has
been optimized. This status consists of:
- st_select_lex::is_correlated
- Item_subselect::is_correlated
- SELECT_LEX::uncacheable
- SELECT_LEX_UNIT::uncacheable
The status is updated by st_select_lex::update_correlated_cache(), and its
caller st_select_lex::optimize_unflattened_subqueries. The solution relies
on the fact that the optimizer already called
st_select_lex::update_used_tables() for each subquery. This allows to
efficiently update the correlated status of each subquery without walking
the whole subquery tree.
Notice that his patch is an improvement over MySQL 5.6 and older, where
subqueries are not pre-optimized, and the above analysis is not possible.
The patch enables back constant subquery execution during
query optimization after it was disabled during the development
of MWL#89 (cost-based choice of IN-TO-EXISTS vs MATERIALIZATION).
The main idea is that constant subqueries are allowed to be executed
during optimization if their execution is not expensive.
The approach is as follows:
- Constant subqueries are recursively optimized in the beginning of
JOIN::optimize of the outer query. This is done by the new method
JOIN::optimize_constant_subqueries(). This is done so that the cost
of executing these queries can be estimated.
- Optimization of the outer query proceeds normally. During this phase
the optimizer may request execution of non-expensive constant subqueries.
Each place where the optimizer may potentially execute an expensive
expression is guarded with the predicate Item::is_expensive().
- The implementation of Item_subselect::is_expensive has been extended
to use the number of examined rows (estimated by the optimizer) as a
way to determine whether the subquery is expensive or not.
- The new system variable "expensive_subquery_limit" controls how many
examined rows are considered to be not expensive. The default is 100.
In addition, multiple changes were needed to make this solution work
in the light of the changes made by MWL#89. These changes were needed
to fix various crashes and wrong results, and legacy bugs discovered
during development.
Description: When the table has more than one unique or primary key,
INSERT... ON DUP KEY UPDATE statement is sensitive to the order in which
the storage engines checks the keys. Depending on this order, the storage
engine may determine different rows to mysql, and hence mysql can update
different rows on master and slave.
Solution: We mark INSERT...ON DUP KEY UPDATE on a table with more than on unique
key as unsafe therefore the event will be logged in row format if it is available
(ROW/MIXED). If only STATEMENT format is available, a warning will be thrown.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test to check for warning being thrown when the unsafe statement is executed
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Updated result file
sql/share/errmsg-utf8.txt:
Added new warning message
sql/sql_base.cc:
check for tables in the query with more than one UNIQUE KEY and INSERT ON DUPLICATE KEY UPDATE, and mark such statements unsafe.
Background:
- as described in MySQL Internals Prepared Stored
(http://forge.mysql.com/wiki/MySQL_Internals_Prepared_Stored),
the Optimizer sometimes does destructive changes to the parsed
LEX-object (Item-tree), which makes it impossible to re-use
that tree for PS/SP re-execution.
- in order to be able to re-use the Item-tree, the destructive
changes are remembered and rolled back after the statement execution.
The problem, discovered by this bug, was that the objects representing
GROUP-BY clause did not restored after query execution. So, the GROUP-BY
part of the statement could not be properly re-initialized for re-execution
after destructive changes.
Those objects do not take part in the Item-tree, so they can not be saved
using the approach for Item-tree.
The fix is as follows:
- introduce a new array in st_select_lex to store the original
ORDER pointers, representing the GROUP-BY clause;
- Initialize this array in fix_prepare_information().
- restore the list of GROUP-BY items in reinit_stmt_before_use().
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
https://mariadb.atlassian.net/browse/MDEV-28
This task implements a new clause LIMIT ROWS EXAMINED <num>
as an extention to the ANSI LIMIT clause. This extension
allows to limit the number of rows and/or keys a query
would access (read and/or write) during query execution.
Problem: Statements that write to tables with auto_increment columns
based on the selection from another table, may lead to master
and slave going out of sync, as the order in which the rows
are retrieved from the table may differ on master and slave.
Solution: We mark writing to a table with auto_increment table
based on the rows selected from another table as unsafe. This
will cause the execution of such statements to throw a warning
and forces the statement to be logged in ROW if the logging
format is mixed.
Changes:
1. All the statements that writes to a table with auto_increment
column(s) based on the rows fetched from another table, will now
be unsafe.
2. CREATE TABLE with SELECT will now be unsafe.
sql/share/errmsg-utf8.txt:
Added new warning messages.
sql/sql_base.cc:
-Created function to check statements that write to
tables with auto_increment column and has select.
-Marked all the statements that write to a table
with auto_increment column based on rows fetched
from other table(s) as unsafe.
sql/sql_table.cc:
mark CREATE TABLE[with auto_increment column] as unsafe.
Problem: Statements that write to tables with auto_increment columns
based on the selection from another table, may lead to master
and slave going out of sync, as the order in which the rows
are retrived from the table may differ on master and slave.
Solution: We mark writing to a table with auto_increment table
as unsafe. This will cause the execution of such statements to
throw a warning and forces the statement to be logged in ROW if
the logging format is mixed.
Changes:
1. All the statements that writes to a table with auto_increment
column(s) based on the rows fetched from another table, will now
be unsafe.
2. CREATE TABLE with SELECT will now be unsafe.
sql/share/errmsg-utf8.txt:
Added new Warning messages
sql/sql_base.cc:
created a new function that checks for select + write on a autoinc table
made all such statements to be unsafe.
sql/sql_parse.cc:
made create autoincremnet tabble + select unsafe
There was memory leak when running some tests on PB2.
The reason of the failure is an early return from change_master()
that was supposed to deallocate a dyn-array.
Actually the same bug58915 was fixed in trunk with relocating the dyn-array
destruction into THD::cleanup_after_query() which can't be bypassed.
The current patch backports magne.mahre@oracle.com-20110203101306-q8auashb3d7icxho
and adds two optimizations: were done: the static buffer for the dyn-array to base on,
and the array initialization is called precisely when it's necessary rather than
per each CHANGE-MASTER as before.
mysql-test/suite/rpl/t/rpl_empty_master_host.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
mysql-test/suite/rpl/t/rpl_server_id_ignore.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
sql/sql_class.cc:
relocating the dyn-array
destruction into THD::cleanup_after_query().
sql/sql_lex.cc:
LEX.mi zero initialization is done in LEX().
sql/sql_lex.h:
Optimization for repl_ignore_server_ids to base on a static buffer
which size is chosen to fit to most common use cases.
sql/sql_repl.cc:
dyn-array destruction is relocated to THD::cleanup_after_query().
sql/sql_yacc.yy:
Refining logics of Lex->mi.repl_ignore_server_ids initialization.
The array is initialized once a corresponding option in CHANGE MASTER token sequence
is found.
There was memory leak when running some tests on PB2.
The reason of the failure is an early return from change_master()
that was supposed to deallocate a dyn-array.
Fixed with relocating the dyn-array's destructor at ~LEX() that is
the end of the session, per Gleb's patch idea.
Two optimizations were done: the static buffer for the dyn-array to base on,
and the array initialization is called precisely when it's necessary rather than
per each CHANGE-MASTER as before.
mysql-test/suite/rpl/t/rpl_empty_master_host.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
sql/sql_lex.cc:
the new flag is initialized.
sql/sql_lex.h:
A new bool flag new member to LEX.mi is added to stay UP since after
LEX.mi.repl_ignore_server_ids dynarray initialization was called
for the first time on the session. So it is set once and its life time
is session.
The array is destroyed at the end of the session.
sql/sql_repl.cc:
dyn-array destruction is relocated to ~LEX.
sql/sql_yacc.yy:
Refining logics of Lex->mi.repl_ignore_server_ids initialization.
The array is initialized once a corresponding option in CHANGE MASTER token sequence
is found.
The fact of initialization is memorized into the new flag.
The problem was that merged views has its own nest_level numbering =>
when we compare nest levels we should take into considiration basis (i.e. 0 level),
if it is different then nest levels are not comparable.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
Test removed: Added the test to rpl.rpl_insert_ignore.test
******
Test removed: the test is redundant as the same is being tested in rpl.rpl_insert_ignore.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
Warnings disabled for the unsafe statements.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
1. Disabled warnings while for unsafe statements
2. As INSERT...IGNORE is an unsafe statement, an insert ignore not changing any rows,
will not be logged in the binary log, in the ROW and MIXED modes. It will however be logged
in STATEMENT mode.
mysql-test/r/commit_1innodb.result:
updated result file
******
updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
added tests for the statements marked as unsafe.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
File Removed :Result file of rpl_insert_duplicate, which has been removed.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
Added the content of rpl.rpl_insert_duplicate here.
mysql-test/suite/rpl/r/rpl_insert_select.result:
Result file removed as the corresponding test has beenn removed.
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
File Removed: this was a wrapper for rpl.rpl_insert_duplicate.test, which has been removed.
mysql-test/suite/rpl/t/rpl_insert_select.test:
File Removed: This test became redundant after this fix, This test showed how INSERT IGNORE...SELECT break replication, which has been handled in this fix.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Since all the tests are statement based bugs are being tested, having mixed format
forces the event to be written in row format. When the statement and causes the
test to fail as certain known bugs do not occur when the even is logged in row format.
sql/share/errmsg-utf8.txt:
added 6 new Warning messages.
******
added 6 new Warning messages.
sql/sql_lex.cc:
Added 6 new error Identifier [ER_BINLOG_STMT_UNSAFEE_*]
sql/sql_lex.h:
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
******
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
sql/sql_parse.cc:
added check for specific queries and marked them as unsafe.
******
added check for specific queries and marked them as unsafe.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
- The problem was that Item_direct_view_ref and its embedded Item_field were getting incorrect
value of item->used_tables() after fix_fields() in the second and subsequent EXECUTE.
- Made relevant fixes in Item_field::fix_fields() and find_field_in_tables(), so that the
Item_field gets the correct attributes.
When merging a view / derived table the function SELECT_LEX::merge_subquery
incorrectly updated the list SELECT_LEX::leaf_tables. Erroneously it
appended the leaf_tables list of the merged object L and then removed the
reference to the merged object T from the SELECT_LEX::leaf_tables list.
A correct implementation should insert the list L into the
SELECT_LEX::leaf_tables list in place of the element of the list that
refers to T.
The bug could lead to wrong results or even crashes for queries with
nested outer joins over views / derived tables.
There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.
mysql-test/r/sp.result:
test case
mysql-test/t/sp.test:
test case
sql/sql_base.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_insert.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_prepare.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_select.cc:
THD::used_tables is replaced with LEX::used_tables
The problem was that optimizer removes some outer references (it they are
constant for example) and the list of outer items built during prepare phase is
not actual during execution phase when we need it as the cache parameters.
First solution was use pointer on pointer on outer reference Item and
initialize temporary table on demand. This solved most problem except case
when optimiser also reduce Item which contains outer references ('OR' in
this bug test suite).
The solution is to build the list of outer reference items on execution
phase (after optimization) on demand (just before temporary table creation)
by walking Item tree and finding outer references among Item_ident
(Item_field/Item_ref) and Item_sum items.
Removed depends_on list (because it is not neede any mnore for the cache, in the place where it was used it replaced with upper_refs).
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references (or other expression parameters in future).
mysql-test/r/subselect_cache.result:
A new test added.
mysql-test/r/subselect_scache.result:
Changes in creating the cache and its paremeters order or adding arguments of aggregate function (which is a parameter also, but this has no influence on the result).
mysql-test/t/subselect_cache.test:
Added a new test.
sql/item.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
Item_cache_wrapper collect parameters befor initialization of its cache.
sql/item.h:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/item_cmpfunc.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_cmpfunc.h:
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_subselect.cc:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_subselect.h:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_sum.cc:
Added processor (collect_outer_ref_processor) method to collect outer references.
sql/item_sum.h:
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/opt_range.cc:
depends_on removed.
sql/sql_base.cc:
depends_on removed.
sql/sql_class.h:
New iterator added.
sql/sql_expression_cache.cc:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_expression_cache.h:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_lex.cc:
depends_on removed.
sql/sql_lex.h:
depends_on removed.
sql/sql_list.h:
Added add_unique method to add only unique elements to the list.
sql/sql_select.cc:
Support of new Item list added.
sql/sql_select.h:
Support of new Item list added.
Before BUG#28796, an empty host was used to identify that an instance was no
longer a slave. However, BUG#28796 changed this behavior and one cannot set
an empty host. Besides, a RESET SLAVE only cleans up information on the next
event to retrieve from the master, disables ssl and resets heartbeat period.
So a call to SHOW SLAVE STATUS after issuing a RESET SLAVE still returns some
valid information, such as host, port, user and password.
To fix this problem, we have introduced the command RESET SLAVE ALL that does
what a regular RESET SLAVE does and also clears host, port, user and password
information thus allowing users to identify when an instance is no longer a
slave.
Also:
1. simplified the code of the function mysql_derived_merge_for_insert.
2. moved merge of views/dt for multi-update/delete to the prepare stage.
3. the list of the references to the candidates for semi-join now is
allocated in the statement memory.
