in multitable delete/subquery
SQL_BUFFER_RESULT should not have an effect on non-SELECT
statements according to our documentation.
Fixed by not passing it through to multi-table DELETE (similarly
to how it's done for multi-table UPDATE).
The problem was that a failure to open a view wasn't being
properly handled. When opening a view with unknown definer,
the open procedure would be treated as successful and would
later crash when attempting to lock the view (which wasn't
opened to begin with).
The solution is to skip further processing when opening a
table if it fails with a fatal error.
being logged to slow query log
The problem is that the execution time for a multi-statement
stored procedure as a whole may not be accurate, and thus not
be entered into the slow query log even if the total time
exceeds long_query_time. The reason for this is that
THD::utime_after_lock used for time calculation may be reset
at the start of each new statement, possibly leaving the total
SP execution equal to the time spent executing the last
statement in the SP.
This patch stores the utime on start of SP execution, and
restores it on exit of SP execution. A test is added.
error causes debug assertion
The IGNORE option of the multiple-table UPDATE command was
not intended to suppress errors caused by the
sql_safe_updates mode. This flag will raise an error if the
execution of UPDATE does not use a key for row retrieval,
and should continue do so regardless of the IGNORE option.
However the implementation of IGNORE does not support
exceptions to the rule; it always converts errors to
warnings and cannot be extended. The Internal_error_handler
interface offers the infrastructure to handle individual
errors, making sure that the error raised by
sql_safe_updates is not silenced.
Fixed by implementing an Internal_error_handler and using it
for UPDATE IGNORE commands.
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection, during the period the COM_REGISTER_SLAVE failures are
produced in server log file when the slave I/O thread tries to
register on master.
To fix the problem, suppress COM_REGISTER_SLAVE failures in server log
file by mtr suppression, because they are expected.
When replicating from 4.1 master to 5.0 slave START SLAVE UNTIL can stop too late.
The necessary in calculating of the beginning of an event the event's length
did not correspond to the master's genuine information at the event's execution time.
That piece of info was changed at the event's relay-logging due to binlog_version<4 event
conversion by IO thread.
Fixed with storing the master genuine Query_log_event size into a new status
variable at relay-logging of the event. The stored info is extacted at the event
execution and participate further to caclulate the correct start position of the event
in the until-pos stopping routine.
The new status variable's algorithm will be only active when the event comes
from the master of version < 5.0 (binlog_version < 4).
Detailed revision comments:
r6471 | calvin | 2010-01-16 01:43:27 +0200 (Sat, 16 Jan 2010) | 4 lines
branches/5.1: fix bug#49396: main.innodb test fails in embedded mode
Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
mode and normal server mode.
Detailed revision comments:
r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
branches/5.1: Add reference to bug#47621 in the comment.
Detailed revision comments:
r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
Detailed revision comments:
r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
check_access() returning false for a database does not
guarantee that the access is granted to it.
This wrong condition in filling the INFORMATION_SCHEMA
tables causes extra tables to be returned to the user
even if he has no rights to see them.
Fixed by correcting the condition.
fulltext search and row op.
The search for fulltext indexes is searching for some special
predicate layouts. While doing so it's not checking for the number
of columns of the expressions it tries to calculate.
And since row expressions can't return a single scalar value there
was a crash.
Fixed by checking if the expressions are scalar (in addition to
being constant) before calling Item::val_xxx() methods.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Several items said to be deprecated in the 4.1 manual
have never been removed. This worklog adds deprecation
warnings when these items are used, and warns the user
that the items will be removed in MySQL 5.6.
A couple of previously deprecation decision have been
reversed (see single file comments)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
valgrind pointed to a buffer allocated by my_realloc which looked fishy
Replaced size with what was probably intended, added test case.
Now also fixed line after review comment
- The arguments are properly quoted when mtr.pl calls my_safe_process but
unfortunately the all off when running with active state perl and stays
in cygwin perl.
- Extend the patch to only quote args that are not already quoted
This a redo of previous commit, will be included in next push
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete:
cant find record
BUG#49482: RBR: Replication may break on deletes when MyISAM tables +
char field are used
When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.
We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.
