REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
In certain rare cases when a process was interrupted
during a FLUSH PRIVILEGES operation the diagnostic
area would be set to an error state but the function
responsible for the operation would still signal
success. This would lead to a debug assertion error
later on when the server would attempt to reset the
DA before sending the error message.
This patch fixes the issue by assuring that
reload_acl_and_cache() always fails if an error
condition is raised.
The second issue was that a KILL could cause
a console error message which referred to a DA
state without first making sure that such a
state existed.
This patch fixes this issue in two different
palces by first checking DA state before
fetching the error message.
Conflicts:
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/instance_map.cc
Contents conflict in server-tools/instance-manager/listener.cc
Contents conflict in server-tools/instance-manager/options.cc
Contents conflict in server-tools/instance-manager/user_map.cc
Bug#35589 SET PASSWORD caused a crash
Bug#35591 FLUSH PRIVILEGES caused a crash
A race condition on the privilege hash tables (proc_priv_hash
and func_priv_hash) caused one thread to try to delete elements
that had already been deleted by another thread.
The bug was caused by reading and saving the pointers to
the hash tables outside mutex protection. This led to an
inconsistency where a thread copied a pointer to a hash,
another thread did the same, the first thread then deleted
the hash, and the second then crashed when it in turn tried to
delete the deleted hash.
The fix is to ensure that operations on the shared hash structures
happens under mutex protection (moving the locking up a little)
The problem is a somewhat common misusage of the strmake function.
The strmake(dst, src, len) function writes at most /len/ bytes to
the string pointed to by src, not including the trailing null byte.
Hence, if /len/ is the exact length of the destination buffer, a
one byte buffer overflow can occur if the length of the source
string is equal to or greater than /len/.
{PROCEDURE|FUNCTION} FROM ...'
The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.
We fix this by not clearing the diagnostics area at binlogging
time.
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
grants are reapplied.
After renaming a user and trying to re-apply grants results in additional
grants.
This is because we use username as part of the key for GRANT_TABLE structure.
When the user is renamed, we only change the username stored and the hash key
still contains the old user name and this results in the extra privileges
Fixed by rebuilding the hash key and updating the column_priv_hash structure
when the user is renamed
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
Original revision in 6.0:
------------------------------------------------------------
revno: 2630.13.11
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-wl4300
timestamp: Thu 2008-07-24 11:44:21 +0400
message:
A patch for WL#4300: Define privileges for tablespaces.
------------------------------------------------------------
per-file messages:
mysql-test/r/grant.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/ps.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/system_mysql_db.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/suite/falcon/r/falcon_tablespace_priv.result
Test case for WL#4300.
mysql-test/suite/falcon/t/falcon_tablespace_priv.test
Test case for WL#4300.
mysql-test/suite/ndb/r/ndb_dd_ddl.result
Test case for WL#4300.
mysql-test/suite/ndb/t/ndb_dd_ddl.test
Test case for WL#4300.
scripts/mysql_system_tables.sql
New columm 'Create_tablespace_priv' has been added to mysql.user.
scripts/mysql_system_tables_data.sql
'CREATE TABLESPACE' is granted by default to the root user.
scripts/mysql_system_tables_fix.sql
Grant 'CREATE TABLESPACE' privilege during system table upgrade
if a user had SUPER privilege.
sql/sql_acl.cc
Added CREATE TABLESPACE privilege.
sql/sql_acl.h
Added CREATE TABLESPACE privilege.
sql/sql_parse.cc
Check global 'CREATE TABLESPACE' privilege for the following SQL statements:
- CREATE | ALTER | DROP TABLESPACE
- CREATE | ALTER | DROP LOGFILE GROUP
sql/sql_show.cc
Added CREATE TABLESPACE privilege.
sql/sql_yacc.yy
Added CREATE TABLESPACE privilege.
view definition
During SHOW CREATE VIEW there is no reason to 'anonymize'
errors that name objects that a user does not have access
to. Moreover it was inconsistently implemented. For example
base tables being referenced from a view appear to be ok,
but not views. The manual on the other hand is clear: If a
user has the privileges SELECT and SHOW VIEW, the view
definition is available to that user, period. The fix
changes the behavior to support the manual.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
view that has Group By
Table access rights checking function check_grant() assumed
that no view is opened when it's called.
This is not true with nested views where the inner view
needs materialization. In this case the view is already
materialized when check_grant() is called for it.
This caused check_grant() to not look for table level
grants on the materialized view table.
Fixed by checking if a view is already materialized and if
it is check table level grants using the original table name
(not the ones of the materialized temp table).
