The maximum value of the max_join_size variable is set by converting
a signed type (long int) with negative value (-1) to a wider unsigned
type (unsigned long long), which yields the largest possible value of
the wider unsigned type -- as per the language conversion rules. But,
depending on build options, the type of the max_join_size might be a
shorter type (ha_rows - unsigned long) which causes the warning to be
thrown once the large value is truncated to fit.
The solution is to ensure that the maximum value of the variable is
always set to the maximum value of integer type of max_join_size.
Furthermore, it would be interesting to always have a fixed type for
this variable, but this would incur in a change of behavior which is
not acceptable for a GA version. See Bug#35346.
Post-merge fix: test case could fail due to a conversion of the
max_join_size value to a integer. Fixed by preserving the value
as a string for comparison purposes.
One of the tests introduced for this bug was failing
because of path size restriction in windows.
Moved the test case to a new test which is disabled under windows.
to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
mysqld
The problem was that enabling the event scheduler inside a init
file caused the server to crash upon start-up. The crash occurred
because the event scheduler wasn't being initialized before the
commands in the init-file are processed.
The solution is to initialize the event scheduler before the init
file is read. The patch also disables the event scheduler during
bootstrap and makes the bootstrap operation robust in the
presence of background threads.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
In create_myisam_from_heap() mark all errors as fatal except
HA_ERR_RECORD_FILE_FULL for a HEAP table.
Not doing so could lead to problems, e.g. in a case when a
temporary MyISAM table gets overrun due to its MAX_ROWS limit
while executing INSERT/REPLACE IGNORE ... SELECT.
The SELECT execution was aborted, but the error was
converted to a warning due to IGNORE clause, so neither 'ok'
nor 'error' packet could be sent back to the client. This
condition led to hanging client when using 5.0 server, or
assertion failure in 5.1.
Problem was that a failing rename just left the partitions at the state
it was at the failure.
Solution was to try to revert the started rename if a failure occured.
not logged
Errors encountered during initialization of the SSL subsystem
are printed to stderr, rather than to the error log.
This patch adds a parameter to several SSL init functions to
report the error (if any) out to the caller. The function
init_ssl() in mysqld.cc is moved after the initialization of
the log subsystem, so that any error messages can be logged to
the error log. Printing of messages to stderr has been
retained to get diagnostic output in a client context.
> ------------------------------------------------------------
> revno: 2792
> revision-id: sergey.glukhov@sun.com-20090703083500-jq8vhw0tqr37j7te
> parent: bernt.johnsen@sun.com-20090703083610-o7l4s8syz05rc4w0
> committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Fri 2009-07-03 13:35:00 +0500
> message:
> Bug#45806 crash when replacing into a view with a join!
> The crash happend because for views which are joins
> we have table_list->table == 0 and
> table_list->table->'any method' call leads to crash.
> The fix is to perform table_list->table->file->extra()
> method for all tables belonging to view.
> ------------------------------------------------------------
> revno: 2772
> revision-id: joro@sun.com-20090615133815-eb007p5793in33p5
> parent: joro@sun.com-20090612140659-4hj1tta9p8wvcw4k
> committer: Georgi Kodinov <joro@sun.com>
> branch nick: B44810-5.0-bugteam
> timestamp: Mon 2009-06-15 16:38:15 +0300
> message:
> Bug #44810: index merge and order by with low sort_buffer_size
> crashes server!
>
> The problem affects the scenario when index merge is followed by a filesort
> and the sort buffer is not big enough for all the sort keys.
> In this case the filesort function will read the data to the end through the
> index merge quick access method (and thus closing the cursor etc),
> but will leave the pointer to the quick select method in place.
> It will then create a temporary file to hold the results of the filesort and
> will add it as a sort output file (in sort.io_cache).
> Note that filesort will copy the original 'sort' structure in an automatic
> variable and restore it after it's done.
> As a result at exiting filesort() we have a sort.io_cache filled in and
> nothing else (as a result of close of the cursors at end of reading data
> through index merge).
> Now create_sort_index() will note that there is a select and will clean it up
> (as it's been used already by filesort() reading the data in). While doing that
> a special case in the index merge destructor will clean up the sort.io_cache,
> assuming it's an output of the index merge method and is not needed anymore.
> As a result the code that tries to read the data back from the filesort output
> will get no data in both memory and disk and will crash.
>
> Fixed similarly to how filesort() does it : by copying the sort.io_cache structure
> to a local variable, removing the pointer to the io_cache (so that it's not freed
> by QUICK_INDEX_MERGE_SELECT::~QUICK_INDEX_MERGE_SELECT) and restoring the original
> structure (together with the valid pointer) after the cleanup is done.
> This is a safe thing to do because all the structures are already cleaned up by
> hitting the end of the index merge's read method (QUICK_INDEX_MERGE_SELECT::get_next())
> and the cleanup code being written in a way that tolerates repeating cleanups.
> ------------------------------------------------------------
> revno: 2763
> revision-id: sergey.glukhov@sun.com-20090602063813-33mh88cz5vpa2jqe
> parent: alexey.kopytov@sun.com-20090601124224-zgt3yov9wou590e9
> committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Tue 2009-06-02 11:38:13 +0500
> message:
> Bug#45152 crash with round() function on longtext column in a derived table
> The crash happens due to wrong max_length value which is set on
> Item_func_round::fix_length_and_dec() stage. The value is set to
> args[0]->max_length which is too big in case of LONGTEXT(LONGBLOB) fields.
> The fix is to set max_length using float_length() function.
> ------------------------------------------------------------
> revno: 2733
> revision-id: gshchepa@mysql.com-20090430192037-9p1etcynkglte2j3
> parent: aelkin@mysql.com-20090430143246-zfqaz0t7uoluzdz2
> committer: Gleb Shchepa <gshchepa@mysql.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Fri 2009-05-01 00:20:37 +0500
> message:
> Bug #37362: Crash in do_field_eq
>
> EXPLAIN EXTENDED of nested query containing a error:
>
> 1054 Unknown column '...' in 'field list'
>
> may cause a server crash.
>
>
> Parse error like described above forces a call to
> JOIN::destroy() on malformed subquery.
> That JOIN::destroy function closes and frees temporary
> tables. However, temporary fields of these tables
> may be listed in st_select_lex::group_list of outer
> query, and that st_select_lex may not cleanup them
> properly. So, after the JOIN::destroy call that
> st_select_lex::group_list may have Item_field
> objects with dangling pointers to freed temporary
> table Field objects. That caused a crash.
binlog
The fix for BUG 43929 introduced a regression issue. In a nutshell, when a
statement that changes a non-transactional table fails, it is written to the
binary log with the error code appended. Unfortunately, after BUG 43929, this
failure was flushing the transactional chace causing mismatch between execution
and logging histories. To fix this issue, we avoid flushing the transactional
cache when a commit or rollback is not issued.
When during the optimization an item is moved to the upper select
the item's context left unchanged. This caused wrong result in the
PS/SP mode.
The Item_ident::remove_dependence_processor now sets the context
of the select to which the item is moved to.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
