Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
Problem description:
Table 't' created with two colums having compound index on both the
columns under innodb/myisam engine at remote machine. In the local
machine same table is created undet the federated engine.
A select having where clause with along 'AND' operation gives wrong
results on local machine.
Analysis:
The given query at federated engine is wrongly transformed by
federated::create_where_from_key() function and the same was sent to
the remote machine. Hence the local machine is showing wrong results.
Given query "select c1 from t where c1 <= 2 and c2 = 1;"
Query transformed, after ha_federated::create_where_from_key() function is:
SELECT `c1`, `c2` FROM `t` WHERE (`c1` IS NOT NULL ) AND
( (`c1` >= 2) AND (`c2` <= 1) ) and the same sent to real_query().
In the above the '<=' and '=' conditions were transformed to '>=' and
'<=' respectively.
ha_federated::create_where_from_key() function behaving as below:
The key_range is having both the start_key and end_key. The start_key
is used to get "(`c1` IS NOT NULL )" part of the where clause, this
transformation is correct. The end_key is used to get "( (`c1` >= 2)
AND (`c2` <= 1) )", which is wrong, here the given conditions('<=' and '=')
are changed as wrong conditions('>=' and '<=').
The end_key is having {key = 0x39fa6d0 "", length = 10, keypart_map = 3,
flag = HA_READ_AFTER_KEY}
The store_length is having value '5'. Based on store_length and length
values the condition values is applied in HA_READ_AFTER_KEY switch case.
The switch case 'HA_READ_AFTER_KEY' is applicable to only the last part of
the end_key and for previous parts it is going to 'HA_READ_KEY_OR_NEXT' case,
here the '>=' is getting added as a condition instead of '<='.
Fix:
Updated the 'if' condition in 'HA_READ_AFTER_KEY' case to affect for all
parts of the end_key. i.e 'i > 0' will used for end_key, Hence added it in
the if condition.
mysql-test/suite/federated/federated.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_archive.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_13118.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_25714.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_35333.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_debug.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_innodb.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_server.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_transactions.test:
modified the federated.inc file location
mysql-test/suite/federated/include/federated.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/federated_cleanup.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/have_federated_db.inc:
moved the file from federated suite to federated/include folder
storage/federated/ha_federated.cc:
updated the 'if condition' in ha_federated::create_where_from_key()
function.
Problem description:
Table 't' created with two colums having compound index on both the
columns under innodb/myisam engine at remote machine. In the local
machine same table is created undet the federated engine.
A select having where clause with along 'AND' operation gives wrong
results on local machine.
Analysis:
The given query at federated engine is wrongly transformed by
federated::create_where_from_key() function and the same was sent to
the remote machine. Hence the local machine is showing wrong results.
Given query "select c1 from t where c1 <= 2 and c2 = 1;"
Query transformed, after ha_federated::create_where_from_key() function is:
SELECT `c1`, `c2` FROM `t` WHERE (`c1` IS NOT NULL ) AND
( (`c1` >= 2) AND (`c2` <= 1) ) and the same sent to real_query().
In the above the '<=' and '=' conditions were transformed to '>=' and
'<=' respectively.
ha_federated::create_where_from_key() function behaving as below:
The key_range is having both the start_key and end_key. The start_key
is used to get "(`c1` IS NOT NULL )" part of the where clause, this
transformation is correct. The end_key is used to get "( (`c1` >= 2)
AND (`c2` <= 1) )", which is wrong, here the given conditions('<=' and '=')
are changed as wrong conditions('>=' and '<=').
The end_key is having {key = 0x39fa6d0 "", length = 10, keypart_map = 3,
flag = HA_READ_AFTER_KEY}
The store_length is having value '5'. Based on store_length and length
values the condition values is applied in HA_READ_AFTER_KEY switch case.
The switch case 'HA_READ_AFTER_KEY' is applicable to only the last part of
the end_key and for previous parts it is going to 'HA_READ_KEY_OR_NEXT' case,
here the '>=' is getting added as a condition instead of '<='.
Fix:
Updated the 'if' condition in 'HA_READ_AFTER_KEY' case to affect for all
parts of the end_key. i.e 'i > 0' will used for end_key, Hence added it in
the if condition.
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
COMMUNICATION PACKETS, ERROR_CODE: 1160
If idle FEDERATED table is evicted from the table cache when
a connection to remote server is lost, query that initiated
eviction may fail.
If this query is executed by slave SQL thread it may fail as well.
An error of close was stored in diagnostics area, which was later
attributed to the statement that caused eviction.
With this patch FEDERATED clears an error of close.
COMMUNICATION PACKETS, ERROR_CODE: 1160
If idle FEDERATED table is evicted from the table cache when
a connection to remote server is lost, query that initiated
eviction may fail.
If this query is executed by slave SQL thread it may fail as well.
An error of close was stored in diagnostics area, which was later
attributed to the statement that caused eviction.
With this patch FEDERATED clears an error of close.
mysql-test/lib/My/Options.pm:
My::Options::is_set() now matches both option names and values!
mysql-test/lib/mtr_cases.pm:
1. don't merge --plugin-load here, it's too early
2. don't skip combinations that set --plugin-load just because the test needs another --plugin-load.
Skip *only* if test's --plugin-load matches *exactly* --plugin-load of one of the combinations.
3. if skipping all combinations but one, still assign the test to the combination
mysql-test/mysql-test-run.pl:
1. remove dead code - don't set variables that aren't used.
2. bugfix: allow one-letter combination names
3. in the command line, merge all --plugin-load options in one
storage/federated/ha_federated.cc:
bugfix: garbage character in the generated SELECT query
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
MAP 'REPAIR TABLE' TO RECREATE +ANALYZE FOR ENGINES NOT
SUPPORTING NATIVE REPAIR
Executing 'mysqlcheck --check-upgrade --auto-repair ...' will first issue
'CHECK TABLE FOR UPGRADE' for all tables in the database in order to check if the
tables are compatible with the current version of MySQL. Any tables that are
found incompatible are then upgraded using 'REPAIR TABLE'.
The problem was that some engines (e.g. InnoDB) do not support 'REPAIR TABLE'.
This caused any such tables to be left incompatible. As a result such tables were
not properly fixed by the mysql_upgrade tool.
This patch fixes the problem by first changing 'CHECK TABLE FOR UPGRADE' to return
a different error message if the engine does not support REPAIR. Instead of
"Table upgrade required. Please do "REPAIR TABLE ..." it will report
"Table rebuild required. Please do "ALTER TABLE ... FORCE ..."
Second, the patch changes mysqlcheck to do 'ALTER TABLE ... FORCE' instead of
'REPAIR TABLE' in these cases.
This patch also fixes 'ALTER TABLE ... FORCE' to actually rebuild the table.
This change should be reflected in the documentation. Before this patch,
'ALTER TABLE ... FORCE' was unused (See Bug#11746162)
Test case added to mysqlcheck.test
client/mysqlcheck.c:
Changed mysqlcheck to do 'ALTER TABLE ... FORCE' if
'CHECK TABLE FOR UPGRADE' reports ER_TABLE_NEEDS_REBUILD
and not ER_TABLE_NEEDS_UPGRADE.
mysql-test/r/mysqlcheck.result:
Added regression test.
mysql-test/std_data/bug47205.frm:
InnoDB 5.0 FRM which contains a varchar primary key using
utf8_general_ci. This is an incompatible FRM for 5.5.
mysql-test/t/mysqlcheck.test:
Added regression test.
sql/handler.h:
Added new HA_CAN_REPAIR flag.
sql/share/errmsg-utf8.txt:
Added new error message ER_TABLE_NEEDS_REBUILD
sql/sql_admin.cc:
Changed 'CHECK TABLE FOR UPDATE' to give ER_TABLE_NEEDS_REBUILD
instead of ER_TABLE_NEEDS_UPGRADE if the engine does not support
REPAIR (as indicated by the new HA_CAN_REPAIR flag).
sql/sql_lex.h:
Remove unused ALTER_FORCE flag.
sql/sql_yacc.yy:
Make sure ALTER TABLE ... FORCE recreates the table
by setting the ALTER_RECREATE flag as the ALTER_FORCE
flag was unused.
storage/archive/ha_archive.h:
Added new HA_CAN_REPAIR flag to Archive
storage/csv/ha_tina.h:
Added new HA_CAN_REPAIR flag to CSV
storage/federated/ha_federated.h:
Added new HA_CAN_REPAIR flag to Federated
storage/myisam/ha_myisam.cc:
Added new HA_CAN_REPAIR flag to MyISAM
MAP 'REPAIR TABLE' TO RECREATE +ANALYZE FOR ENGINES NOT
SUPPORTING NATIVE REPAIR
Executing 'mysqlcheck --check-upgrade --auto-repair ...' will first issue
'CHECK TABLE FOR UPGRADE' for all tables in the database in order to check if the
tables are compatible with the current version of MySQL. Any tables that are
found incompatible are then upgraded using 'REPAIR TABLE'.
The problem was that some engines (e.g. InnoDB) do not support 'REPAIR TABLE'.
This caused any such tables to be left incompatible. As a result such tables were
not properly fixed by the mysql_upgrade tool.
This patch fixes the problem by first changing 'CHECK TABLE FOR UPGRADE' to return
a different error message if the engine does not support REPAIR. Instead of
"Table upgrade required. Please do "REPAIR TABLE ..." it will report
"Table rebuild required. Please do "ALTER TABLE ... FORCE ..."
Second, the patch changes mysqlcheck to do 'ALTER TABLE ... FORCE' instead of
'REPAIR TABLE' in these cases.
This patch also fixes 'ALTER TABLE ... FORCE' to actually rebuild the table.
This change should be reflected in the documentation. Before this patch,
'ALTER TABLE ... FORCE' was unused (See Bug#11746162)
Test case added to mysqlcheck.test
mysql-test/suite/handler/innodb.result:
Added test case
mysql-test/suite/handler/innodb.test:
Added test case
sql/handler.h:
Move setting/resetting of active_index to ha_index_init()/ha_index_end() to simplify handler functions index_init()/index_end()
Fixed that get_index() returns MAX_KEY if index is not inited (this fixed LP#697610)
storage/federated/ha_federated.cc:
Settting of active_index is not needed anymore
storage/maria/ma_pagecache.c:
Added error message if we have too little memory for Maria page cache
Reason: inconsistent compilation, federatedx is compiled without SAFEMALLOC
flag, while anything else is compiled with SAFEMALLOC.
As a consequence, my_hash_init used inside federatedx initialization does not
provide correct caller info parameters (file, line) , so they are initialized with
whatever is on stack. When info about allocated memory is output in
COM_DEBUG command, the server crashes trying to output string starting at
0xcccccccccccccccc.
The fix is to remove SAFEMALLOC preprocessor flags
from every CMakeLists.txt, except the top-level one.
Also, SAFEMALLOC is not defined by default now, instead
there is WITH_DEBUG_FULL CMake option which adds
-DSAFEMALLOC to C and C++ flags in debug compilation.
This option is off by default, because
1) Debug C runtime already has heap debugging builtin with
overwrite and leak detection
2)safemalloc considerably slows down the tests.
Note also that
- SAFEMALLOC is gone in MySQL5.5
- On Windows, heap related overflows can also be found using free pageheap utility
(that is also part of application verifier). This is even more efficient if there are no other layers
on top of Windows heap allocator, e.g it is most efficient with release version.
