DOING BAD DDL IN PREPARED STATEMENT
Analysis
========
A repeat execution of the prepared statement 'ALTER TABLE v1
CHECK PARTITION' where v1 is a view leads to server exit.
ALTER TABLE ... CHECK PARTITION is not applicable for views
and check for the same check is missing. This leads to
further execution and creation of derived table for the view
(Allocated under temp_table mem_root). Any reference to open
view or related pointers from second execution leads to
server exit as the same was freed at previous execution closure.
Fix:
======
Added check for view in mysql_admin_table() on PARTITION
operation. This will prevent mysql_admin_table() from
going ahead and creating temp table and related issues.
Changed message on admin table view operation error to
be more appropriate.
IS REJECTED.
Analysis
========
View creation with named columns over UNION is rejected.
Consider the following view definition:
CREATE VIEW v1 (fld1, fld2) AS SELECT 1 AS a, 2 AS b
UNION ALL SELECT 1 AS a, 1 AS a;
A 'duplicate column' error was reported due to the duplicate
alias name in the secondary SELECT. The VIEW column names
are either explicitly specified or determined from the
first SELECT (which can be auto generated if not specified).
Since a duplicate column name check was performed even
for the secondary SELECTs, an error was reported.
Fix
====
Check for duplicate column names only for the named
columns if specified or only for the first SELECT.
ENOUGH - CONCAT() HACKS. ALSO WRONG
ERROR MESSAGE WHILE TRYING TO CREATE
A VIEW ON A NON EXISTING DATABASE
PROBLEM:
The first part of the problem is concluded as not a
bug, as 'concat' is not a reserved word and it is
completely valid to create a view with the name
'concat'.
The second issue is, while trying to create a view on
a non existing database, we are not giving a proper error
message.
FIX:
We have added a check for the database existence while
trying to create a view. This check would give an error
as 'unknown database' when the database does not exist.
This patch is a backport of the patch for Bug#13601606
Select from a view with the underlying HAVING clause failed with a
message: "1356: View '...' references invalid table(s) or column(s)
or function(s) or definer/invoker of view lack rights to use them"
The bug is a regression of the fix for bug 11750328 - 40825 (similar
case, but the HAVING cause references an aliased field).
In the old fix for bug 40825 the Item_field::name_length value has
been used in place of the real length of Item_field::name. However,
in some cases Item_field::name_length is not in sync with the
actual name length (TODO: combine name and name_length into a
solid String field).
The Item_ref::print() method has been modified to calculate actual
name length every time.
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
is allowed on views (not documented, broken)".
Remove support of ALTER TABLE RENAME for views as:
a) this feature was not documented,
c) does not add any compatibility with other databases,
b) its implementation doesn't follow metadata locking
protocol by accessing .FRM without holding any
metadata lock,
c) its implementation complicates ALTER TABLE's code
by introducing yet another separate branch to it.
After this patch one can rename a view by using the
documented way - RENAME TABLE statement.
We should disable const subselect item evaluation because
subselect transformation does not happen in view_prepare_mode
and thus val_...() methods can not be called.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/subselect.result
Text conflict in mysql-test/r/subselect3.result
Text conflict in mysql-test/r/type_datetime.result
Text conflict in sql/share/Makefile.am
The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.
Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.
The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
an INFORMATION_SCHEMA table
When a prepared statement using a merged view containing an information
schema table was executed, a metadata lock of the view was not taken.
This meant that it was possible for concurrent view DDL to execute,
thereby breaking the binary log. For example, it was possible
for DROP VIEW to appear in the binary log before a query using the view.
This also happened when a statement in a stored routine was executed a
second time.
For such views, the information schema table is merged into the view
during the prepare phase (or first execution of a statement in a routine).
The problem was that we took a short cut and were not executing full-blown
view opening during subsequent executions of the statement. As a result,
a metadata lock on the view was not taken to protect the view definition.
This patch resolves the problem by making sure a metadata lock is taken
for views even after information schema tables are merged into them.
Test cased added to view.test.
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
In case of 'CREATE VIEW' subselect transformation does not happen(see JOIN::prepare).
During fix_fields Item_row may call is_null() method for its arugmens which
leads to item calculation(wrong subselect in our case as
transformation did not happen before). This is_null() call
does not make sence for 'CREATE VIEW'.
Note:
Only Item_row is affected because other items don't call is_null()
during fix_fields() for arguments.
SHOW CREATE TABLE on a view (v1) that contains a function whose
statement uses another view (v2), could trigger a infinite loop
if the view referenced within the function causes a warning to
be raised while opening the said view (v2).
The problem was a infinite loop over the stack of internal error
handlers. The problem would be triggered if the stack contained
two or more handlers and the first two handlers didn't handle the
raised condition. In this case, the loop variable would always
point to the second handler in the stack.
The solution is to correct the loop variable assignment so that
the loop is able to iterate over all handlers in the stack.
The problem was that a failure to open a view wasn't being
properly handled. When opening a view with unknown definer,
the open procedure would be treated as successful and would
later crash when attempting to lock the view (which wasn't
opened to begin with).
The solution is to skip further processing when opening a
table if it fails with a fatal error.
to string conversions and vice versa"
Initial import of the dtoa.c code and custom wrappers around it
to allow its usage from the server code.
Conversion of FLOAT/DOUBLE values to DECIMAL ones or strings
and vice versa has been significantly reworked. As the new
algoritms are more precise than the older ones, results of such
conversions may not always match those obtained from older
server versions. This in turn may break compatibility for some
applications.
This patch also fixes the following bugs:
- bug #12860 "Difference in zero padding of exponent between
Unix and Windows"
- bug #21497 "DOUBLE truncated to unusable value"
- bug #26788 "mysqld (debug) aborts when inserting specific
numbers into char fields"
- bug #24541 "Data truncated..." on decimal type columns
without any good reason"
Bug #47635 assert in start_waiting_global_read_lock during CREATE VIEW
The problem was that CREATE VIEW would trigger an assert if
a temporary table with the same name already existed.
This bug was fixed by the patch for Bug#47335. CREATE/ALTER VIEW
will now ignore temporary tables. See Bug#47335 for more information.
Test case added to view.test.
Bug #47335 assert in get_table_share
The assert would happen if ALTER VIEW was used to alter a view (existing
or non-existing) and a temporary table with the same name already existed.
The assert is triggered if the current statement does not have a MDL lock on
the view to be altered. This would happen because open_table() would open
the temporary table instead and MDL locks are not taken for temporary
tables (since they are local to one connection).
The patch changes open_type for CREATE/ALTER VIEW to OT_BASE_ONLY. This prevents
open_table() from trying to open a temporary table with the same name should
one exist. Now the view will be altered if it exists or ER_NO_SUCH_TABLE will
be reported if it does not.
Test case added to view.test
Bug #48248 assert in MDL_ticket::upgrade_shared_lock_to_exclusive
The assert would happen if REPAIR TABLE was used on a table already
locked by LOCK TABLES READ. REPAIR mistakenly tried to upgrade the
read-lock to exclusive, thereby triggering the assert.
The cause of the problem was that REPAIR TABLE ignored errors
from opening and locking tables. This is by design, as REPAIR
can be used to broken tables that cannot be opened. However,
repair also ignored logical errors such as the inability to
exclusivly lock a table due to conflicting LOCK TABLES.
This patch fixes the problem by not ignoring errors from
opening and locking tables if inside LOCK TABLES mode.
In LOCK TABLES we already know that the table can be opened,
so that the failure to open must be a logical error.
Test added to repair.test.
Backport of:
------------------------------------------------------------
revno: 2630.4.1
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Fri 2008-05-23 17:54:03 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
------------------------------------------------------------
This is the first patch in series. It transforms the metadata
locking subsystem to use a dedicated module (mdl.h,cc). No
significant changes in the locking protocol.
The import passes the test suite with the exception of
deprecated/removed 6.0 features, and MERGE tables. The latter
are subject to a fix by WL#4144.
Unfortunately, the original changeset comments got lost in a merge,
thus this import has its own (largely insufficient) comments.
This patch fixes Bug#25144 "replication / binlog with view breaks".
Warning: this patch introduces an incompatible change:
Under LOCK TABLES, it's no longer possible to FLUSH a table that
was not locked for WRITE.
Under LOCK TABLES, it's no longer possible to DROP a table or
VIEW that was not locked for WRITE.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.2
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:03:45 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.3
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:08:51 +0400
message:
WL#3726 "DDL locking for all metadata objects"
Fixed failing Windows builds by adding mdl.cc to the lists
of files needed to build server/libmysqld on Windows.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.4
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 21:57:58 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Fix for assert failures in kill.test which occured when one
tried to kill ALTER TABLE statement on merge table while it
was waiting in wait_while_table_is_used() for other connections
to close this table.
These assert failures stemmed from the fact that cleanup code
in this case assumed that temporary table representing new
version of table was open with adding to THD::temporary_tables
list while code which were opening this temporary table wasn't
always fulfilling this.
This patch changes code that opens new version of table to
always do this linking in. It also streamlines cleanup process
for cases when error occurs while we have new version of table
open.
******
WL#3726 "DDL locking for all metadata objects"
Add libmysqld/mdl.cc to .bzrignore.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.6
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sun 2008-05-25 00:33:22 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Addition to the fix of assert failures in kill.test caused by
changes for this worklog.
Make sure we close the new table only once.
------------------------------------------------------------
revno: 2476.784.3
committer: davi@moksha.local
timestamp: Tue 2007-10-02 21:27:31 -0300
message:
Bug#25858 Some DROP TABLE under LOCK TABLES can cause deadlocks
When a client (connection) holds a lock on a table and attempts to
drop (obtain a exclusive lock) on a second table that is already
held by a second client and the second client then attempts to
drop the table that is held by the first client, leads to a
circular wait deadlock. This scenario is very similar to trying to
drop (or rename) a table while holding read locks and are
correctly forbidden.
The solution is to allow a drop table operation to continue only
if the table being dropped is write (exclusively) locked, or if
the table is temporary, or if the client is not holding any
locks. Using this scheme prevents the creation of a circular
chain in which each client is waiting for one table that the
next client in the chain is holding.
This is incompatible change, as can be seen by number of tests
cases that needed to be fixed, but is consistent with respect to
behavior of the different scenarios in which the circular wait
might happen.
Backport for 5.5
The root cause of this bug is that the grammar for GROUP BY clauses,
when using WITH CUBE or WITH ROLLUP, cause conflicts with the grammar
for VIEW, when using WITH CHECK OPTION.
The solution is to implement two token look ahead when parsing a WITH token,
to disambiguate the non standard WITH CUBE and WITH ROLLUP syntaxes.
Patch based on code from Marc Alff and Antony Curtis
BUG#38049 "incorrect rows estimations with references from preceding table"
(from revid:sergefp@mysql.com-20090126194259-ue20il3qro529l4d).
Compared to 6.0 where EXPLAIN indicates "Using index condition", here in join_optimizer.result
we see "Using where"; it's normal; 6.0 shows the same if disabling Index Condition Pushdown.
> ------------------------------------------------------------
> revno: 2792
> revision-id: sergey.glukhov@sun.com-20090703083500-jq8vhw0tqr37j7te
> parent: bernt.johnsen@sun.com-20090703083610-o7l4s8syz05rc4w0
> committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Fri 2009-07-03 13:35:00 +0500
> message:
> Bug#45806 crash when replacing into a view with a join!
> The crash happend because for views which are joins
> we have table_list->table == 0 and
> table_list->table->'any method' call leads to crash.
> The fix is to perform table_list->table->file->extra()
> method for all tables belonging to view.
The crash happend because for views which are joins
we have table_list->table == 0 and
table_list->table->'any method' call leads to crash.
The fix is to perform table_list->table->file->extra()
method for all tables belonging to view.
with a "HAVING" clause though query works
SELECT from views defined like:
CREATE VIEW v1 (view_column)
AS SELECT c AS alias FROM t1 HAVING alias
fails with an error 1356:
View '...' references invalid table(s) or column(s)
or function(s) or definer/invoker of view lack rights
to use them
CREATE VIEW form with a (column list) substitutes
SELECT column names/aliases with names from a
view column list.
However, alias references in HAVING clause was
not substituted.
The Item_ref::print function has been modified
to write correct aliased names of underlying
items into VIEW definition generation/.frm file.
Problem: executing queries like "ALTER TABLE view1;" we don't
check new view's name (which is not specified),
that leads to server crash.
Fix: do nothing (to be consistent with the behaviour for tables)
in such cases.
