Problem: The "--local-install" service does not perform as expected for, at least,
Windows.
Fix: A NULL pointer was dereferenced due to which there was crash.A check was introduced
for NULL string before dereferencing it.No test cases written as it is a bug during
installation.
Problem:
When log_warnings is greater than 1, master prints binlog
dump thread information in mysqld.1.err file.
The information contains slave server id, binlog file and
binlog position. The slave server id is uint32 and the print
format was wrongly specifified (%d instead of %u).
Hence a server id which is more than 2 billion is getting
printed with a negative value.
Eg: Start binlog_dump to slave_server(-1340259414),
pos(mysql-bin.001663, 325187493)
Fix: Changed the uint32 format to %u.
RESULTING MY_WC_T RESULT IS NOT USED
Issue : handler functions my_ismbchar_utf8,
my_well_formed_len_mb for charset utf8
is calling unicode converion function
to validate and to find the character
length. Because of this, instructions
which will convert the utf8 to unicode
are executed for no use.
A similar issue exist with charset utf8mb4
Solution : reorganized the code such that character
validation part of unicode conversion
handler is extracted(duplicated) in to
separate function. Hence
my_ismbchar_utf8, my_well_formed_len_mb
will call the new function which only
validates and return the length of mb(utf8).
A similar fix for charset utf8mb4.
strings/ctype-utf8.c:
New functions has been added for charset utf8 and utf8mb4
to validate and to get the length of the character.
Problem:-
We have created a table with UTF8_BIN collation.
In case, when in our query we have ORDER BY clause over a function
call we are getting result in incorrect order.
Note:the bug is not there in 5.5.
Analysis:
In 5.5, for UTF16_BIN, we have min and max multi-byte length is 2 and 4
respectively.In make_sortkey(),for 2 byte character character we are
assuming that the resultant length will be 2 byte/character. But when we
use my_strnxfrm_unicode_full_bin(), we store sorting weights using 3 bytes
per character.This result in truncated result.
Same thing happen for UTF8MB4, where we have 1 byte min multi-byte and
4 byte max multi-byte.We will accsume resultant data as 1 byte/character,
which result in truncated result.
Solution:-
use strnxfrm(means use of MY_CS_STRNXFRM macro) is used for sort, in
which the resultant length is not dependent on source length.
"SHOW BINLOG EVENTS"
Problem:
========
mysql was crashed after executing "show binlog events in
'mysql-bin.000005' from 99", the crash happened randomly.
Analysis:
========
During construction of LOAD EVENT or NEW LOAD EVENT object
if the starting offset is provided as incorrect value then
all the object members that are retrieved from the offset
are also invalid. Some times it will lead to out of bound
address offsets. In the bug scenario, the file name is
extracrated from an invalid address and the same is fed to
strlen(fname) function. Passing invalid address to strlen
will lead to crash.
Fix:
===
Validate if the given offset falls within the event boundary
or not.
sql/log_event.cc:
Added code to validate fname's address. "fname" should
be within event boundary. Added code to find invalid
invents.
The pthread_cond_timedwait(3P) api
uses a const struct timespec for parameter 3.
The instrumentation api for the same, mysql_cond_timedwait,
which expands to inline_mysql_cond_timedwait,
should also take a const parameter for the timespec.
This fix add the missing const to inline_mysql_cond_timedwait.
CAN RETURN WRONG RESULT SET
PROBLEM
-------
In ha_partition::cmp_ref() we were only calling the
underlying cmp_ref() of storage engine if the records
are in the same partiton,else we sort by partition and
returns the result.But the index merge intersect
algorithm expects first to sort by row-id first and
then by partition id.
FIX
---
Compare the refernces first using storage engine cmp_ref
and then if references are equal(only happens if
non clustered index is used) then sort it by partition id.
[Approved by Mattiasj #rb3755]
-
UPPER CASE HOST NAME ANYMORE
Description:
It is not possible to drop users with host names with upper case
letters in them. i.e DROP USER 'root'@'Tmp_Host_Name'; is failing
with error.
Analysis: Since the fix 11748570 we came up with lower case hostnames
as standard. But in the current bug the hostname is created by
mysql_install_db script is still having upper case hostnames.
So, if we have the hostname with upper case letters like(Tmp_Host_Name)
then we will have as it is stored in the mysql.user table.
In this case if use "'DROP USER 'root'@'Tmp_Host_Name';" it gives
error because we do compare with the lower case of hostname since the
11748570 fix.
Fix: We need to convert the hostname to lower case before storing into
the mysql.user table when we run the mysql_install_db script.
possibly since it was introduced in the patch for Bug#16720368 around
2013-04-30. This fix is simply to adjust the mtr.add_suppression() lines
in the testcase and to add a missing "\n" in the error message.
Approved by Marko in RB 3746
-Wl,--no-undefined (=-z defs) gives linking errors when used with WITH_ASAN.
According to the documentation:
"When linking shared libraries, the AddressSanitizer run-time is not linked,
so -Wl,-z,defs may cause link errors (don’t use it with AddressSanitizer)."
This patch turns off -Wl,--no-undefined if WITH_ASAN is used.
ON DELETE FROM A PARTITIONED TABLE
PROBLEM
-------
The user first disables all the non unique indexes
in the table and then rebuilds one partition.
During rebuild the indexes on that particular
partition are enabled. Now when we give a query
the optimizer is unaware that on one partition
indexes are enabled and if the optimizer selects
that index,myisam thinks that the index is not
active and gives an error.
FIX
---
Before rebuilding a partition check whether non
unique indexes are disabled on the partitons.
If they are disabled then after rebuild disable
the index on the partition.
[Approved by Mattiasj #rb3469]
Regression from bug#14621190 due to disabled optimistic restoration
of cursor, which required full key lookup instead of verifying
if previously positioned btree cursor could be reused.
Fixed by enable optimistic restore and adjust cursor afterward.
rb#3324 approved by Marko.
Problem:
COM_CHANGE_USER allows brute-force attempts to crack a password at a very high
rate as it does not cause any significant delay after a login attempt has
failed. This issue was reproduced using John-The-Ripper password
cracking tool through which about 5000 passwords per second could be attempted.
Solution:
The non-GA version's solution was to disconnect the connection when a login
attempt failed. Now since our aim to to reduce the rate at which passwords
are tested, we introduced a sleep(1) after every login attempt failed. This
significantly increased the delay with which the password was cracked.
AS A INNODB PARTITTION.
PROBLEM
-------
The correct engine_type was not being set during
rebuild of the partition due to which the handler
was always created with the default engine,
which is innodb for 5.5+ ,therefore even if the
table was myisam, after rebuilding the partitions
ended up as innodb partitions.
FIX
---
Set the correct engine type during rebuild.
[Approved by mattiasj #rb3599]
The assertion happens when: (i) the master and slave are configured to
use the semisync plugin; (ii) the DBA disables semisync on the master;
(iii) and he also unsets the option to wait for slaves ACK even if the
semisync slave count reaches 0 during the waiting period. This
combination of factors makes the server run into an assertion as soon
as the last semisync slave disconnects and its dump thread exits.
The root of the problem is the fact that when the dump thread
disconnects and calls the observer hook transmit_stop, which ends up
calling ReplSemiSyncMaster::remove_slave, there is no check whether
the master has already disabled semisync or not. If it has, the then a
second call to the switch_off member function must be avoided.
The quick fix is to avoid calling switch_off if the DBA has disabled
the semisync plugin interactively on the master. Also, the switch_off
member function should only be called if the plugin has not been
switched off already. This is basically the pattern throughout the
rest of the semisync plugin and no other calls seem vulnerable to
similar crashes/assertions.
(This a backport of the patch to 5.5, which is also vulnerable.)
--Implemented CHECK TABLE...QUICK.
Introduce CHECK TABLE...QUICK that would skip the btr_validate_index()
and btr_search_validate() call, and count the no. of records in each index.
Approved by Marko and Kevin. (rb#3567).
REPLICATION FILTERS ARE USED.
Problem:
When Filtered-slave applies Int_var_log_event and when it
tries to write the event to its own binlog, LAST_INSERT_ID
value is written wrongly.
Analysis:
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
is a variable which is set when LAST_INSERT_ID() is used by
a statement. If it is set, first_successful_insert_id_in_
prev_stmt_for_binlog will be stored in the statement-based
binlog. This variable is CUMULATIVE along the execution of
a stored function or trigger: if one substatement sets it
to 1 it will stay 1 until the function/trigger ends,
thus making sure that first_successful_insert_id_in_
prev_stmt_for_binlog does not change anymore and is
propagated to the caller for binlogging. This is achieved
using the following code
if(!stmt_depends_on_first_successful_insert_id_in_prev_stmt)
{
/* It's the first time we read it */
first_successful_insert_id_in_prev_stmt_for_binlog=
first_successful_insert_id_in_prev_stmt;
stmt_depends_on_first_successful_insert_id_in_prev_stmt= 1;
}
Slave server, after receiving Int_var_log_event event from
master, it is setting
stmt_depends_on_first_successful_insert_id_in_prev_stmt
to true(*which is wrong*) and not setting
first_successful_insert_id_in_prev_stmt_for_binlog. Because
of this problem, when the actual DML statement with
LAST_INSERT_ID() is parsed by slave SQL thread,
first_successful_insert_id_in_prev_stmt_for_binlog is not
set. Hence the value zero (default value) is written to
slave's binlog.
Why only *Filtered slave* is effected when the code is
in common place:
-------------------------------------------------------
In Query_log_event::do_apply_event,
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
is reset to zero at the end of the function. In case of
normal slave (No Filters), this variable will be reset.
In Filtered slave, Slave SQL thread defers all IRU events's
execution until IRU's Query_log event is received. Once it
receives Query_log_event it executes all pending IRU events
and then it executes Query_log_event. Hence the variable is
not getting reset to 0, causing this bug.
Fix: As described above, the root cause was setting
THD::stmt_depends_on_first_successful_insert_id_in_prev_stmt
when Int_var_log_event was executed by a SQL thread. Hence
removing the problematic line from the code.
