sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
Test removed: Added the test to rpl.rpl_insert_ignore.test
******
Test removed: the test is redundant as the same is being tested in rpl.rpl_insert_ignore.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
Warnings disabled for the unsafe statements.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
1. Disabled warnings while for unsafe statements
2. As INSERT...IGNORE is an unsafe statement, an insert ignore not changing any rows,
will not be logged in the binary log, in the ROW and MIXED modes. It will however be logged
in STATEMENT mode.
mysql-test/r/commit_1innodb.result:
updated result file
******
updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
added tests for the statements marked as unsafe.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
File Removed :Result file of rpl_insert_duplicate, which has been removed.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
Added the content of rpl.rpl_insert_duplicate here.
mysql-test/suite/rpl/r/rpl_insert_select.result:
Result file removed as the corresponding test has beenn removed.
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
File Removed: this was a wrapper for rpl.rpl_insert_duplicate.test, which has been removed.
mysql-test/suite/rpl/t/rpl_insert_select.test:
File Removed: This test became redundant after this fix, This test showed how INSERT IGNORE...SELECT break replication, which has been handled in this fix.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Since all the tests are statement based bugs are being tested, having mixed format
forces the event to be written in row format. When the statement and causes the
test to fail as certain known bugs do not occur when the even is logged in row format.
sql/share/errmsg-utf8.txt:
added 6 new Warning messages.
******
added 6 new Warning messages.
sql/sql_lex.cc:
Added 6 new error Identifier [ER_BINLOG_STMT_UNSAFEE_*]
sql/sql_lex.h:
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
******
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
sql/sql_parse.cc:
added check for specific queries and marked them as unsafe.
******
added check for specific queries and marked them as unsafe.
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
Problem: MYSQL_BIN_LOG::reset_logs acquires mutexes in wrong order.
The correct order is first LOCK_thread_count and then LOCK_log. This function
does it the other way around. This leads to deadlock when run in parallel
with a thread that takes the two locks in correct order. For example, a thread
that disconnects will take the locks in the correct order.
Fix: change order of the locks in MYSQL_BIN_LOG::reset_logs:
first LOCK_thread_count and then LOCK_log.
mysql-test/suite/binlog/r/binlog_reset_master.result:
added result file
mysql-test/suite/binlog/t/binlog_reset_master.test:
Added test case that demonstrates deadlock because of wrong mutex order.
The deadlock is between two threads:
- RESET MASTER acquires mutexes in wrong order.
- client thread shutdown code acquires mutexes in right order.
Actually, this test case does not produce deadlock in 5.1, probably
the client thread shutdown code does not hold both mutexes at the same
time. However, the bug existed in 5.1 (mutexes are taken in the wrong
order) so we push the test case to 5.1 too, to prevent future
regressions.
sql/log.cc:
Change mutex acquisition to the correct order:
first LOCK_thread_count, then LOCK_log.
sql/mysqld.cc:
Add debug code to synchronize test case.
This assert could be triggered during two phase commit if binary
log was used as transaction coordinator log. The triggered assert
checks that the same number of transaction IDs are processed in
the prepare and commit phases.
The reason it was triggered, was that the transaction consisted
of an INSERT/UPDATE IGNORE that had an ignorable error. Since it
had an error, no row log events were made and therefore
prepared_xids was 0. However, since it was an IGNORE statement,
the statement started a read/write statement transaction, committed
it and completed successfully.
This patch fixes the problem by adjusting the assert to take
this possibility into account.
Test case added to binlog.binlog_innodb_row.test.
Removing the test case from mysql-5.5 list of disabled
test cases for the binlog suite. Actually, the test does
not exist in mysql-5.5, thus this is just a clean up.
Changed test suite to use --log-basename (to get the code tested)
Added --sync-sys=1 to test suite to speed it up.
Better error messages if something goes wrong with mysql_install_db
mysql-test/Makefile.am:
Removed not existing directory
mysql-test/lib/My/ConfigFactory.pm:
Use log-basename
We had to also set 'log_error' as some test was explicitely using the old name
Added 'sync-sys=1' to speed up test suite
mysql-test/r/variables-notembedded.result:
Updated test results (variable relay_log is now set)
mysql-test/suite/binlog/t/binlog_delete_and_flush_index-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_index-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Better error message if something goes wrong
mysql-test/suite/rpl/r/rpl_flushlog_loop.result:
Updated results
mysql-test/suite/rpl/rpl_1slave_base.cnf:
Use --log-basename
scripts/mysql_install_db.sh:
More information to --help
Write url to knowledge base if something goes wrong
Fail at once if we can't create a database directory (no reason to continue and write a screenful of not related text)
scripts/mysqld_safe.sh:
Also allow one to use --data for --datadir (common shortening)
Added support for --log-basename
Fail at once if we can't create a log directory
Fixed bug where we used a pid file name without '.pid' extension
sql/log.cc:
Create a log file name trough my_once_alloc() (To get it automaticly freed at exit)
sql/mysql_priv.h:
Added new prototype
sql/mysqld.cc:
Added support for --log-basename
Better help for a lot of log-filename related variables.
sql/rpl_rli.cc:
Write information that one can use --log-basename
sql/set_var.cc:
Add log_basename as a readonly variable
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
mysql-test/suite/binlog/r/binlog_killed.result:
bug in the test case fixed: the function *must* be declared as
NOT DETERMINISTIC because it has side effects (it waits on
the get_lock() when invoked more than once).
When declared DETERMINISTIC, MariaDB feels free to cache the result
and shortcut the execution, which breaks the test logic
mysql-test/suite/binlog/t/binlog_killed.test:
bug in the test case fixed: the function *must* be declared as
NOT DETERMINISTIC because it has side effects (it waits on
the get_lock() when invoked more than once).
When declared DETERMINISTIC, MariaDB feels free to cache the result
and shortcut the execution, which breaks the test logic
- MWL#47, allowing to annotate row-based binlog events with the SQL test of
the originating query (eg. in mysqlbinlog output).
- row_based_replication_without_primary_key.patch, providing more intelligent
selection of index to use on slave when applying row-based binlog events
for tables with no primary key.
- Make mysqlbinlog omit redundant `use` around BEGIN/SAVEPOINT/COMMIT/
ROLLBACK in 5.0 binlogs.
This patch adds options to annotate the binlog (and the mysqlbinlog
output) with the original SQL query for queries that are logged
using row-based replication.
It includes speed optimizations for HANDLER READ by caching as much as possible in HANDLER OPEN
Other things:
- Added mysqld option --disable-thr-alarm to be able to benchmark things without thr_alarm
- Changed 'Locked' state to 'System lock' and 'Table lock' (these where used in the code but never shown to end user)
- Better error message if mysql_install_db.sh fails
- Moved handler function prototypes to sql_handler.h
- Remove not anymore used 'thd->locked' member
include/thr_alarm.h:
Added my_disable_thr_alarm
include/thr_lock.h:
Add new member to THR_LOCK_DATA to remember original lock type state. This is needed as thr_unlock() resets type to TL_UNLOCK.
mysql-test/include/check_no_concurrent_insert.inc:
Locked -> Table lock
mysql-test/include/handler.inc:
Locked -> Table lock
mysql-test/r/handler_innodb.result:
Updated results for new tests
mysql-test/r/handler_myisam.result:
Updated results for new tests
mysql-test/r/sp-threads.result:
Locked -> Table lock
mysql-test/suite/binlog/t/binlog_stm_row.test:
Locked -> Table lock
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Locked -> Table lock
mysql-test/suite/pbxt/t/lock_multi.test:
Locked -> Table lock
mysql-test/suite/sys_vars/r/concurrent_insert_func.result:
Locked -> Table lock
mysql-test/suite/sys_vars/t/concurrent_insert_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/delayed_insert_limit_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/query_cache_wlock_invalidate_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/sql_low_priority_updates_func.test:
Locked -> Table lock
mysql-test/t/insert_notembedded.test:
Locked -> Table lock
mysql-test/t/lock_multi.test:
Locked -> Table lock
mysql-test/t/merge-big.test:
Locked -> Table lock
mysql-test/t/multi_update.test:
Locked -> Table lock
mysql-test/t/query_cache_28249.test:
Locked -> Table lock
mysql-test/t/sp_notembedded.test:
Locked -> Table lock
mysql-test/t/sp_sync.test:
Locked -> Table lock
mysql-test/t/status.test:
Locked -> Table lock
mysql-test/t/trigger_notembedded.test:
Locked -> Table lock
mysys/thr_alarm.c:
Added option to disable thr_alarm
mysys/thr_lock.c:
Detect loops
scripts/mysql_install_db.sh:
Give better error message if something goes wrong
sql/Makefile.am:
Added sql_handler.h
sql/lock.cc:
Split functions to allow one to cache value if store_lock() (for HANDLER functions).
- Split mysql_lock_tables() into two functions, where first one allocates MYSQL_LOCK and other other one uses it.
- Made get_lock_data() an external function.
- Added argument to mysql_unlock_tables() to not free sql_lock.
- Added argument to reset_lock_data() to reset lock structure to initial state (as after get_lock_data())
sql/mysql_priv.h:
Moved handler function prototypes to sql_handler.h
Added new lock functions.
sql/mysqld.cc:
Added --thread-alarm startup option
sql/net_serv.cc:
Don't call vio_blocking() if not needed
sql/sql_base.cc:
include sql_handler.h
sql/sql_class.cc:
include sql_handler.h
Remove not anymore used 'thd->locked' member
sql/sql_class.h:
Remove not anymore used 'thd->locked' member
sql/sql_db.cc:
include sql_handler.h
sql/sql_delete.cc:
include sql_handler.h
sql/sql_handler.cc:
Rewrote all code to use SQL_HANDLER instead of TABLE_LIST (original interface)
Rewrote mysql_ha_open() to cache all things from TABLE_LIST and items for field list, where etc.
In mysql_ha_open() also cache MYSQL_LOCK structure from get_lock_data().
Split functions into smaller sub functions (needed to be able to implement mysql_ha_read_prepare())
Added mysql_ha_read_prepare() to allow one to prepare HANDLER READ.
sql/sql_handler.h:
Interface to sql_handler.cc
sql/sql_parse.cc:
include sql_handler.h
sql/sql_prepare.cc:
Added mysql_test_handler_read(), prepare for HANDLER READ
sql/sql_rename.cc:
include sql_handler.h
sql/sql_show.cc:
Removed usage of thd->locked
sql/sql_table.cc:
include sql_handler.h
sql/sql_trigger.cc:
include sql_handler.h
