------------------------------------------------------------------------
r3607 | marko | 2008-12-30 22:33:31 +0200 (Tue, 30 Dec 2008) | 20 lines
branches/zip: Remove the dependency on the MySQL HASH table implementation.
Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects.
struct st_innobase_share: Make table_name const uchar*. Add the member
table_name_hash.
innobase_open_tables: Change the type from HASH to hash_table_t*.
innobase_get_key(): Remove.
innobase_fold_name(): New function, for computing the fold value for the
InnoDB hash table.
get_share(), free_share(): Use the InnoDB hash functions.
innobase_end(): Free innobase_open_tables before shutting down InnoDB.
Shutting down InnoDB will invalidate all memory allocated via InnoDB.
rb://65 approved by Heikki Tuuri. This addresses Issue #104.
------------------------------------------------------------------------
r3608 | marko | 2008-12-30 22:45:04 +0200 (Tue, 30 Dec 2008) | 22 lines
branches/zip: When setting the PAGE_LEVEL of a compressed B-tree page
from or to 0, compress the page at the same time. This is necessary,
because the column information stored on the compressed page will
differ between leaf and non-leaf pages. Leaf pages are identified by
PAGE_LEVEL=0. This bug was reported as Issue #150.
Document the similarity between btr_page_create() and
btr_page_empty(). Make the function signature of btr_page_empty()
identical with btr_page_create(). (This will add the parameter "level".)
btr_root_raise_and_insert(): Replace some code with a call to
btr_page_empty().
btr_attach_half_pages(): Assert that the page level has already been
set on both block and new_block. Do not set it again.
btr_discard_only_page_on_level(): Document that this function is
probably never called. Make it work on any height tree. (Tested on
2-high tree by disabling btr_lift_page_up().)
rb://68
------------------------------------------------------------------------
r3612 | marko | 2009-01-02 11:02:44 +0200 (Fri, 02 Jan 2009) | 14 lines
branches/zip: Merge c2998 from branches/6.0, so that the same InnoDB Plugin
source tree will work both under 5.1 and 6.0. Do not add the test case
innodb_ctype_ldml.test, because it would not work under MySQL 5.1.
Refuse to create tables whose columns contain collation IDs above 255.
This removes an assertion failure that was introduced in WL#4164
(Two-byte collation IDs).
create_table_def(): Do not fail an assertion if a column contains a
charset-collation ID greater than 256. Instead, issue an error and
refuse to create the table.
The original change (branches/6.0 r2998) was rb://51 approved by Calvin Sun.
------------------------------------------------------------------------
r3613 | inaam | 2009-01-02 15:10:50 +0200 (Fri, 02 Jan 2009) | 6 lines
branches/zip: Implement the parameter innodb_use_sys_malloc
(false by default), for disabling InnoDB's internal memory allocator
and using system malloc/free instead.
rb://62 approved by Marko
------------------------------------------------------------------------
r3614 | marko | 2009-01-02 15:55:12 +0200 (Fri, 02 Jan 2009) | 1 line
branches/zip: ChangeLog: Document r3608 and r3613.
------------------------------------------------------------------------
r3615 | marko | 2009-01-02 15:57:51 +0200 (Fri, 02 Jan 2009) | 1 line
branches/zip: ChangeLog: Clarify the impact of r3608.
------------------------------------------------------------------------
r3616 | marko | 2009-01-03 00:23:30 +0200 (Sat, 03 Jan 2009) | 1 line
branches/zip: srv_suspend_mysql_thread(): Add some clarifying comments.
------------------------------------------------------------------------
r3618 | marko | 2009-01-05 12:54:53 +0200 (Mon, 05 Jan 2009) | 15 lines
branches/zip: Merge revisions 3598:3601 from branches/5.1:
------------------------------------------------------------------------
r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines
branches/5.1: Make
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1.
This fixes an error that was introduced in r370, causing
semi-consistent read not to not unlock rows in READ COMMITTED mode.
(Bug #41671, Issue #146)
rb://67 approved by Heikki Tuuri
------------------------------------------------------------------------
------------------------------------------------------------------------
r3623 | vasil | 2009-01-06 09:56:32 +0200 (Tue, 06 Jan 2009) | 7 lines
branches/zip:
Add patch to fix the failing main.variables mysql-test. It started failing
after the variable innodb_use_sys_malloc was added because it matches
'%alloc%' and the test is badly written and expects that no new variables
like that will ever be added.
------------------------------------------------------------------------
r3795 | marko | 2009-01-07 16:17:47 +0200 (Wed, 07 Jan 2009) | 7 lines
branches/zip: row_merge_tuple_cmp(): Do not report a duplicate key value
if any of the fields are NULL. While the tuples are equal in the
sorting order, SQL NULL is defined to be logically inequal to
anything else. (Bug #41904)
rb://70 approved by Heikki Tuuri
------------------------------------------------------------------------
r3796 | marko | 2009-01-07 16:19:32 +0200 (Wed, 07 Jan 2009) | 1 line
branches/zip: Add the tests that were forgotten from r3795.
------------------------------------------------------------------------
r3797 | marko | 2009-01-07 16:22:18 +0200 (Wed, 07 Jan 2009) | 22 lines
branches/zip: Do not call trx_allocate_for_mysql() directly, but use
helper functions that initialize some members of the transaction struct.
(Bug #41680)
innobase_trx_init(): New function: initialize some fields of a
transaction struct from a MySQL THD object.
innobase_trx_allocate(): New function: allocate and initialize a
transaction struct.
check_trx_exists(): Use the above two functions.
ha_innobase::delete_table(), ha_innobase::rename_table(),
ha_innobase::add_index(), ha_innobase::final_drop_index():
Use innobase_trx_allocate().
innobase_drop_database(): In the Windows plugin, initialize the trx_t
specially, because the THD is not available. Otherwise, use
innobase_trx_allocate().
rb://69 accepted by Heikki Tuuri
------------------------------------------------------------------------
r3798 | marko | 2009-01-07 16:42:42 +0200 (Wed, 07 Jan 2009) | 8 lines
branches/zip: row_merge_drop_temp_indexes(): Do not lock the rows of
SYS_INDEXES when looking for partially created indexes. Use the
transaction isolation level READ UNCOMMITTED to avoid interfering with
locks held by incomplete transactions that will be rolled back in a
subsequent step in the recovery. (Issue #152)
Approved by Heikki Tuuri
------------------------------------------------------------------------
r3852 | vasil | 2009-01-08 22:10:10 +0200 (Thu, 08 Jan 2009) | 4 lines
branches/zip:
Add ChangeLog entries for r3795 r3796 r3797 r3798.
------------------------------------------------------------------------
r3866 | marko | 2009-01-09 15:09:51 +0200 (Fri, 09 Jan 2009) | 2 lines
branches/zip: buf_flush_try_page(): Move some common code from each
switch case before the switch block.
------------------------------------------------------------------------
r3867 | marko | 2009-01-09 15:13:14 +0200 (Fri, 09 Jan 2009) | 2 lines
branches/zip: buf_flush_try_page(): Introduce the variable is_compressed
for caching the result of buf_page_get_state(bpage) == BUF_BLOCK_FILE_PAGE.
------------------------------------------------------------------------
r3868 | marko | 2009-01-09 15:40:11 +0200 (Fri, 09 Jan 2009) | 4 lines
branches/zip: buf_flush_insert_into_flush_list(),
buf_flush_insert_sorted_into_flush_list(): Remove unused code.
Change the parameter to buf_block_t* block and assert that
block->state == BUF_BLOCK_FILE_PAGE. This is part of Issue #155.
------------------------------------------------------------------------
r3873 | marko | 2009-01-09 22:27:40 +0200 (Fri, 09 Jan 2009) | 17 lines
branches/zip: Some non-functional changes related to Issue #155.
buf_page_struct: Note that space and offset are also protected by
buf_pool_mutex. They are only assigned to by
buf_block_set_file_page(). Thus, it suffices for buf_flush_batch() to
hold just buf_pool_mutex when checking these fields.
buf_flush_try_page(): Rename "locked" to "is_s_latched", per Heikki's request.
buf_flush_batch(): Move the common statement mutex_exit(block_mutex)
from all if-else if-else branches before the if block. Remove the
redundant test (buf_pool->init_flush[flush_type] == FALSE) that was
apparently copied from buf_flush_write_complete().
buf_flush_write_block_low(): Note why it is safe not to hold buf_pool_mutex
or block_mutex. Enumerate the assumptions in debug assertions.
------------------------------------------------------------------------
r3874 | marko | 2009-01-09 23:09:06 +0200 (Fri, 09 Jan 2009) | 4 lines
branches/zip: Add comments related to Issue #155.
buf_flush_try_page(): Note why it is safe to access bpage without
holding buf_pool_mutex or block_mutex.
------------------------------------------------------------------------
r3875 | marko | 2009-01-09 23:15:12 +0200 (Fri, 09 Jan 2009) | 11 lines
branches/zip: Non-functional change: Tighten debug assertions and
remove dead code.
buf_flush_ready_for_flush(), buf_flush_try_page(): Assert that
flush_type is one of BUF_FLUSH_LRU or BUF_FLUSH_LIST. The flush_type
comes from buf_flush_batch(), which already asserts this. The
assertion holds for all calls in the source code.
buf_flush_try_page(): Remove the dead case BUF_FLUSH_SINGLE_PAGE
of switch (flush_type).
------------------------------------------------------------------------
r3879 | marko | 2009-01-12 12:46:44 +0200 (Mon, 12 Jan 2009) | 14 lines
branches/zip: Simplify the flushing of dirty pages from the buffer pool.
buf_flush_try_page(): Rename to buf_flush_page(), and change the
return type to void. Replace the parameters space, offset with bpage,
and remove the second page hash lookup. Note and assert that both
buf_pool_mutex and block_mutex must now be held upon entering the
function. They will still be released by this function.
buf_flush_try_neighbors(): Replace buf_flush_try_page() with
buf_flush_page(). Make the logic easier to follow by not negating the
precondition of buf_flush_page().
rb://73 approved by Sunny Bains. This is related to Issue #157.
------------------------------------------------------------------------
r3880 | marko | 2009-01-12 13:24:37 +0200 (Mon, 12 Jan 2009) | 2 lines
branches/zip: buf_flush_page(): Fix a comment that should have been fixed
in r3879. Spotted by Sunny.
------------------------------------------------------------------------
r3881 | marko | 2009-01-12 14:25:22 +0200 (Mon, 12 Jan 2009) | 2 lines
branches/zip: buf_page_get_newest_modification(): Use the block mutex
instead of the buffer pool mutex. This is related to Issue #157.
------------------------------------------------------------------------
r3882 | marko | 2009-01-12 14:40:08 +0200 (Mon, 12 Jan 2009) | 3 lines
branches/zip: struct mtr_struct: Remove the unused field magic_n
unless UNIV_DEBUG is defined. mtr->magic_n is only assigned to
and checked in UNIV_DEBUG builds.
------------------------------------------------------------------------
r3883 | marko | 2009-01-12 14:48:59 +0200 (Mon, 12 Jan 2009) | 1 line
branches/zip: Non-functional change: Use ut_d when assigning to mtr->state.
------------------------------------------------------------------------
r3884 | marko | 2009-01-12 18:56:11 +0200 (Mon, 12 Jan 2009) | 16 lines
branches/zip: Non-functional change: Add some debug assertions and comments.
buf_page_t: Note that the LRU fields are protected by buf_pool_mutex
only, not block->mutex or buf_pool_zip_mutex.
buf_page_get_freed_page_clock(): Note that this is sometimes invoked
without mutex protection.
buf_pool_get_oldest_modification(): Note that the result may be out of
date.
buf_page_get_LRU_position(), buf_page_is_old(): Assert that the buffer
pool mutex is being held.
buf_page_release(): Assert that dirty blocks are in the flush list.
------------------------------------------------------------------------
r3896 | marko | 2009-01-13 09:30:26 +0200 (Tue, 13 Jan 2009) | 2 lines
branches/zip: buf_flush_try_neighbors(): Fix a bug
that was introduced in r3879 (rb://73).
------------------------------------------------------------------------
r3900 | marko | 2009-01-13 10:32:24 +0200 (Tue, 13 Jan 2009) | 1 line
branches/zip: Fix some comments to say buf_pool_mutex.
------------------------------------------------------------------------
r3907 | marko | 2009-01-13 11:54:01 +0200 (Tue, 13 Jan 2009) | 3 lines
branches/zip: row_merge_create_temporary_table(): On error,
row_create_table_for_mysql() already frees new_table.
Do not attempt to free it again.
------------------------------------------------------------------------
r3908 | marko | 2009-01-13 12:34:32 +0200 (Tue, 13 Jan 2009) | 1 line
branches/zip: Enable HASH_ASSERT_OWNED independently of UNIV_SYNC_DEBUG.
------------------------------------------------------------------------
r3914 | marko | 2009-01-13 21:46:22 +0200 (Tue, 13 Jan 2009) | 37 lines
branches/zip: In hash table lookups, assert that the traversed items
satisfy some conditions when UNIV_DEBUG is defined.
HASH_SEARCH(): New parameter: ASSERTION. All users will pass an appropriate
ut_ad() or nothing.
dict_table_add_to_columns(): Assert that the table being added to the data
dictionary cache is not already being pointed to by the name_hash and
id_hash tables.
HASH_SEARCH_ALL(): New macro, for use in dict_table_add_to_columns().
dict_mem_table_free(): Set ut_d(table->cached = FALSE), so that we can
check ut_ad(table->cached) when traversing the hash tables, as in
HASH_SEARCH(name_hash, dict_sys->table_hash, ...) and
HASH_SEARCH(id_hash, dict_sys->table_id_hash, ...).
dict_table_get_low(), dict_table_get_on_id_low(): Assert
ut_ad(!table || table->cached).
fil_space_get_by_id(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(hash, fil_system->spaces, ...).
fil_space_get_by_name(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(name_hash, fil_system->name_hash, ...).
buf_buddy_block_free(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->zip_hash, ...).
buf_page_hash_get(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->page_hash, ...).
get_share(), free_share(): Check ut_ad(share->use_count > 0) in
HASH_SEARCH(table_name_hash, innobase_open_tables, ...).
This was posted as rb://75 for tracking down errors similar to Issue #153.
------------------------------------------------------------------------
r3931 | marko | 2009-01-14 16:06:22 +0200 (Wed, 14 Jan 2009) | 26 lines
branches/zip: Merge revisions 3601:3930 from branches/5.1:
------------------------------------------------------------------------
r3911 | sunny | 2009-01-13 14:15:24 +0200 (Tue, 13 Jan 2009) | 13 lines
branches/5.1: Fix Bug#38187 Error 153 when creating savepoints
InnoDB previously treated savepoints as a stack e.g.,
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- This would delete b and c.
This fix changes the behavior to:
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- Does not delete savepoint c
------------------------------------------------------------------------
r3930 | marko | 2009-01-14 15:51:30 +0200 (Wed, 14 Jan 2009) | 4 lines
branches/5.1: dict_load_table(): If dict_load_indexes() fails,
invoke dict_table_remove_from_cache() instead of dict_mem_table_free(),
so that the data dictionary will not point to freed data.
(Bug #42075, Issue #153, rb://76 approved by Heikki Tuuri)
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
r3607 | marko | 2008-12-30 22:33:31 +0200 (Tue, 30 Dec 2008) | 20 lines
branches/zip: Remove the dependency on the MySQL HASH table implementation.
Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects.
struct st_innobase_share: Make table_name const uchar*. Add the member
table_name_hash.
innobase_open_tables: Change the type from HASH to hash_table_t*.
innobase_get_key(): Remove.
innobase_fold_name(): New function, for computing the fold value for the
InnoDB hash table.
get_share(), free_share(): Use the InnoDB hash functions.
innobase_end(): Free innobase_open_tables before shutting down InnoDB.
Shutting down InnoDB will invalidate all memory allocated via InnoDB.
rb://65 approved by Heikki Tuuri. This addresses Issue #104.
------------------------------------------------------------------------
r3608 | marko | 2008-12-30 22:45:04 +0200 (Tue, 30 Dec 2008) | 22 lines
branches/zip: When setting the PAGE_LEVEL of a compressed B-tree page
from or to 0, compress the page at the same time. This is necessary,
because the column information stored on the compressed page will
differ between leaf and non-leaf pages. Leaf pages are identified by
PAGE_LEVEL=0. This bug was reported as Issue #150.
Document the similarity between btr_page_create() and
btr_page_empty(). Make the function signature of btr_page_empty()
identical with btr_page_create(). (This will add the parameter "level".)
btr_root_raise_and_insert(): Replace some code with a call to
btr_page_empty().
btr_attach_half_pages(): Assert that the page level has already been
set on both block and new_block. Do not set it again.
btr_discard_only_page_on_level(): Document that this function is
probably never called. Make it work on any height tree. (Tested on
2-high tree by disabling btr_lift_page_up().)
rb://68
------------------------------------------------------------------------
------------------------------------------------------------------------
r2838 | vasil | 2008-10-21 12:49:27 +0300 (Tue, 21 Oct 2008) | 61 lines
branches/zip:
Merge 2744:2837 from branches/5.1 (skipping r2782 and r2826):
------------------------------------------------------------------------
r2832 | vasil | 2008-10-21 10:08:30 +0300 (Tue, 21 Oct 2008) | 10 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
In ha_innobase::info():
Replace sql_print_warning() which prints to mysqld error log with
push_warning_printf() which sends the error message to the client.
Suggested by: Marko, Sunny, Michael
Objected by: Inaam
------------------------------------------------------------------------
r2837 | vasil | 2008-10-21 12:07:44 +0300 (Tue, 21 Oct 2008) | 32 lines
Changed paths:
M /branches/5.1/mysql-test/innodb-semi-consistent.result
M /branches/5.1/mysql-test/innodb-semi-consistent.test
M /branches/5.1/mysql-test/innodb.result
M /branches/5.1/mysql-test/innodb.test
branches/5.1:
Merge a change from MySQL (this fixes the failing innodb and
innodb-semi-consistent tests):
revno: 2757
committer: Georgi Kodinov <kgeorge@mysql.com>
branch nick: B39812-5.1-5.1.29-rc
timestamp: Fri 2008-10-03 15:24:19 +0300
message:
Bug #39812: Make statement replication default for 5.1 (to match 5.0)
Make STMT replication default for 5.1.
Add a default of MIXED into the config files
Fix the tests that needed MIXED replication mode.
modified:
mysql-test/include/mix1.inc
mysql-test/r/innodb-semi-consistent.result
mysql-test/r/innodb.result
mysql-test/r/innodb_mysql.result
mysql-test/r/tx_isolation_func.result
mysql-test/t/innodb-semi-consistent.test
mysql-test/t/innodb.test
mysql-test/t/tx_isolation_func.test
sql/mysqld.cc
support-files/my-huge.cnf.sh
support-files/my-innodb-heavy-4G.cnf.sh
support-files/my-large.cnf.sh
support-files/my-medium.cnf.sh
support-files/my-small.cnf.sh
------------------------------------------------------------------------
------------------------------------------------------------------------
r2847 | marko | 2008-10-22 10:07:37 +0300 (Wed, 22 Oct 2008) | 6 lines
branches/zip: page_zip_rec_needs_ext(): Fix a bug that was introduced
in the fix of Mantis issue #73. With key_block_size=16, we will also
have to check the available space on the uncompressed page.
Otherwise, the clustered index record can be almost 16 kilobytes in
size, and the undo log record will not fit.
------------------------------------------------------------------------
r2850 | marko | 2008-10-22 13:52:12 +0300 (Wed, 22 Oct 2008) | 2 lines
branches/zip: ibuf_insert_to_index_page(): Discard the local variable block.
page_cur is always positioned on block, the function parameter.
------------------------------------------------------------------------
r2853 | sunny | 2008-10-23 01:52:09 +0300 (Thu, 23 Oct 2008) | 2 lines
branches/zip: Add missing UNIV_INTERN.
------------------------------------------------------------------------
r2855 | sunny | 2008-10-23 09:29:46 +0300 (Thu, 23 Oct 2008) | 36 lines
branches/zip:
Merge revisions 2837:2852 from branches/5.1:
------------------------------------------------------------------------
r2849 | sunny | 2008-10-22 12:01:18 +0300 (Wed, 22 Oct 2008) | 8 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/row0mysql.h
M /branches/5.1/row/row0mysql.c
branches/5.1: Return the actual error code encountered when allocating
a new autoinc value. The change in behavior (bug) was introduced in 5.1.22
when we introduced the new AUTOINC locking model.
rb://31
Bug#40224 New AUTOINC changes mask reporting of deadlock/timeout errors
------------------------------------------------------------------------
r2852 | sunny | 2008-10-23 01:42:24 +0300 (Thu, 23 Oct 2008) | 9 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/handler/ha_innodb.h
branches/5.1: Backport r2724 from branches/zip
Check column value against the col max value before updating the table's
global autoinc counter value. This is part of simplifying the AUTOINC
sub-system. We extract the type info from MySQL data structures at runtime.
This fixes Bug#37788 InnoDB Plugin: AUTO_INCREMENT wrong for compressed tables
------------------------------------------------------------------------
------------------------------------------------------------------------
r2856 | sunny | 2008-10-23 10:07:05 +0300 (Thu, 23 Oct 2008) | 1 line
Reverting test file changes from r2855
------------------------------------------------------------------------
r2857 | sunny | 2008-10-23 10:24:33 +0300 (Thu, 23 Oct 2008) | 30 lines
branches/zip:
Merge revisions 2852:2854 from branches/5.1:
------------------------------------------------------------------------
r2854 | sunny | 2008-10-23 08:30:32 +0300 (Thu, 23 Oct 2008) | 13 lines
Changed paths:
M /branches/5.1/dict/dict0dict.c
M /branches/5.1/dict/dict0mem.c
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/handler/ha_innodb.h
M /branches/5.1/include/dict0dict.h
M /branches/5.1/include/dict0mem.h
M /branches/5.1/row/row0mysql.c
branches/5.1: Backport changes from branches/zip r2725
Simplify the autoinc initialization code. This removes the
non-determinism related to reading the table's autoinc value for the first
time. This change has also reduced the sizeof dict_table_t by sizeof(ibool)
bytes because we don't need the dict_table_t::autoinc_inited field anymore.
Bug#39830 Table autoinc value not updated on first insert.
Bug#35498 Cannot get table test/table1 auto-inccounter value in ::info
Bug#36411 Failed to read auto-increment value from storage engine" in 5.1.24 auto-inc
rb://16
------------------------------------------------------------------------
------------------------------------------------------------------------
r2858 | vasil | 2008-10-23 11:33:43 +0300 (Thu, 23 Oct 2008) | 4 lines
branches/zip:
Update the ChangeLog
------------------------------------------------------------------------
r2861 | marko | 2008-10-23 12:27:15 +0300 (Thu, 23 Oct 2008) | 24 lines
branches/zip: Clean up the file format stamping.
trx_sys_file_format_max_upgrade(): Rename from
trx_sys_file_format_max_update(). Improve the documentation. Add a
const qualifier to the parameter "name". Replace the parameter
"flags" with "format_id", because this function should deal with file
format identifiers, not with table flags.
trx_sys_file_format_max_write(), trx_sys_file_format_max_set(): Add a
const qualifier to the parameter "name".
ha_innodb.cc: Correct the spelling in some comments: "side effect".
Remove redundant prototypes for some static callback functions.
innodb_file_format_name_update(), innodb_file_format_check_update():
Correct the function signature. Use appropriate pointer type conversions.
MYSQL_SYSVAR_STR(file_format), MYSQL_SYSVAR_STR(file_format_check):
Remove the type conversions from the callback function pointers. When
the function signatures match, no type conversion is needed. The type
conversions would only prevent compilation warnings for any mismatch.
Approved by Sunny in rb://25.
------------------------------------------------------------------------
r2862 | marko | 2008-10-23 12:37:42 +0300 (Thu, 23 Oct 2008) | 8 lines
branches/zip: Non-functional changes:
ibuf_get_volume_buffered(): Declare with static linkage.
This function is private to ibuf0ibuf.c.
btr_cur_pessimistic_delete(): Use the cached result of
btr_cur_get_index(cursor).
------------------------------------------------------------------------
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
ha_innobase::update_thd(void): New function, to call the inline function
ha_innobase::update_thd(THD*).
check_trx_exists(): Make static. handler0alter.cc does not need to call
this function.
#ifdef ROW_MERGE_IS_INDEX_USABLE, to avoid growing the memory
footprint until MySQL implements and calls the virtual method
handler::is_index_available() or something equivalent.
for displaying buddy allocator statistics.
buf_buddy_used[], buf_buddy_relocated[]: Declare as global symbols.
mysql_declare_plugin(innobase): Add MYSQL_INFORMATION_SCHEMA_PLUGIN
for innobase_is_buddy ("INNODB_BUDDY").
mysql.patch: Patch to change or add variables to MySQL
innodb.patch: Patch to make the master thread poll requests to resize
the buffer pool.
Replace srv_pool_size and innobase_buffer_pool_size
with srv_buf_pool_size, srv_buf_pool_old_size,
and srv_buf_pool_curr_size.
Add buf_chunk_t, a collection of buf_block_t.
