------------------------------------------------------------------------
r3607 | marko | 2008-12-30 22:33:31 +0200 (Tue, 30 Dec 2008) | 20 lines
branches/zip: Remove the dependency on the MySQL HASH table implementation.
Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects.
struct st_innobase_share: Make table_name const uchar*. Add the member
table_name_hash.
innobase_open_tables: Change the type from HASH to hash_table_t*.
innobase_get_key(): Remove.
innobase_fold_name(): New function, for computing the fold value for the
InnoDB hash table.
get_share(), free_share(): Use the InnoDB hash functions.
innobase_end(): Free innobase_open_tables before shutting down InnoDB.
Shutting down InnoDB will invalidate all memory allocated via InnoDB.
rb://65 approved by Heikki Tuuri. This addresses Issue #104.
------------------------------------------------------------------------
r3608 | marko | 2008-12-30 22:45:04 +0200 (Tue, 30 Dec 2008) | 22 lines
branches/zip: When setting the PAGE_LEVEL of a compressed B-tree page
from or to 0, compress the page at the same time. This is necessary,
because the column information stored on the compressed page will
differ between leaf and non-leaf pages. Leaf pages are identified by
PAGE_LEVEL=0. This bug was reported as Issue #150.
Document the similarity between btr_page_create() and
btr_page_empty(). Make the function signature of btr_page_empty()
identical with btr_page_create(). (This will add the parameter "level".)
btr_root_raise_and_insert(): Replace some code with a call to
btr_page_empty().
btr_attach_half_pages(): Assert that the page level has already been
set on both block and new_block. Do not set it again.
btr_discard_only_page_on_level(): Document that this function is
probably never called. Make it work on any height tree. (Tested on
2-high tree by disabling btr_lift_page_up().)
rb://68
------------------------------------------------------------------------
r3612 | marko | 2009-01-02 11:02:44 +0200 (Fri, 02 Jan 2009) | 14 lines
branches/zip: Merge c2998 from branches/6.0, so that the same InnoDB Plugin
source tree will work both under 5.1 and 6.0. Do not add the test case
innodb_ctype_ldml.test, because it would not work under MySQL 5.1.
Refuse to create tables whose columns contain collation IDs above 255.
This removes an assertion failure that was introduced in WL#4164
(Two-byte collation IDs).
create_table_def(): Do not fail an assertion if a column contains a
charset-collation ID greater than 256. Instead, issue an error and
refuse to create the table.
The original change (branches/6.0 r2998) was rb://51 approved by Calvin Sun.
------------------------------------------------------------------------
r3613 | inaam | 2009-01-02 15:10:50 +0200 (Fri, 02 Jan 2009) | 6 lines
branches/zip: Implement the parameter innodb_use_sys_malloc
(false by default), for disabling InnoDB's internal memory allocator
and using system malloc/free instead.
rb://62 approved by Marko
------------------------------------------------------------------------
r3614 | marko | 2009-01-02 15:55:12 +0200 (Fri, 02 Jan 2009) | 1 line
branches/zip: ChangeLog: Document r3608 and r3613.
------------------------------------------------------------------------
r3615 | marko | 2009-01-02 15:57:51 +0200 (Fri, 02 Jan 2009) | 1 line
branches/zip: ChangeLog: Clarify the impact of r3608.
------------------------------------------------------------------------
r3616 | marko | 2009-01-03 00:23:30 +0200 (Sat, 03 Jan 2009) | 1 line
branches/zip: srv_suspend_mysql_thread(): Add some clarifying comments.
------------------------------------------------------------------------
r3618 | marko | 2009-01-05 12:54:53 +0200 (Mon, 05 Jan 2009) | 15 lines
branches/zip: Merge revisions 3598:3601 from branches/5.1:
------------------------------------------------------------------------
r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines
branches/5.1: Make
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1.
This fixes an error that was introduced in r370, causing
semi-consistent read not to not unlock rows in READ COMMITTED mode.
(Bug #41671, Issue #146)
rb://67 approved by Heikki Tuuri
------------------------------------------------------------------------
------------------------------------------------------------------------
r3623 | vasil | 2009-01-06 09:56:32 +0200 (Tue, 06 Jan 2009) | 7 lines
branches/zip:
Add patch to fix the failing main.variables mysql-test. It started failing
after the variable innodb_use_sys_malloc was added because it matches
'%alloc%' and the test is badly written and expects that no new variables
like that will ever be added.
------------------------------------------------------------------------
r3795 | marko | 2009-01-07 16:17:47 +0200 (Wed, 07 Jan 2009) | 7 lines
branches/zip: row_merge_tuple_cmp(): Do not report a duplicate key value
if any of the fields are NULL. While the tuples are equal in the
sorting order, SQL NULL is defined to be logically inequal to
anything else. (Bug #41904)
rb://70 approved by Heikki Tuuri
------------------------------------------------------------------------
r3796 | marko | 2009-01-07 16:19:32 +0200 (Wed, 07 Jan 2009) | 1 line
branches/zip: Add the tests that were forgotten from r3795.
------------------------------------------------------------------------
r3797 | marko | 2009-01-07 16:22:18 +0200 (Wed, 07 Jan 2009) | 22 lines
branches/zip: Do not call trx_allocate_for_mysql() directly, but use
helper functions that initialize some members of the transaction struct.
(Bug #41680)
innobase_trx_init(): New function: initialize some fields of a
transaction struct from a MySQL THD object.
innobase_trx_allocate(): New function: allocate and initialize a
transaction struct.
check_trx_exists(): Use the above two functions.
ha_innobase::delete_table(), ha_innobase::rename_table(),
ha_innobase::add_index(), ha_innobase::final_drop_index():
Use innobase_trx_allocate().
innobase_drop_database(): In the Windows plugin, initialize the trx_t
specially, because the THD is not available. Otherwise, use
innobase_trx_allocate().
rb://69 accepted by Heikki Tuuri
------------------------------------------------------------------------
r3798 | marko | 2009-01-07 16:42:42 +0200 (Wed, 07 Jan 2009) | 8 lines
branches/zip: row_merge_drop_temp_indexes(): Do not lock the rows of
SYS_INDEXES when looking for partially created indexes. Use the
transaction isolation level READ UNCOMMITTED to avoid interfering with
locks held by incomplete transactions that will be rolled back in a
subsequent step in the recovery. (Issue #152)
Approved by Heikki Tuuri
------------------------------------------------------------------------
r3852 | vasil | 2009-01-08 22:10:10 +0200 (Thu, 08 Jan 2009) | 4 lines
branches/zip:
Add ChangeLog entries for r3795 r3796 r3797 r3798.
------------------------------------------------------------------------
r3866 | marko | 2009-01-09 15:09:51 +0200 (Fri, 09 Jan 2009) | 2 lines
branches/zip: buf_flush_try_page(): Move some common code from each
switch case before the switch block.
------------------------------------------------------------------------
r3867 | marko | 2009-01-09 15:13:14 +0200 (Fri, 09 Jan 2009) | 2 lines
branches/zip: buf_flush_try_page(): Introduce the variable is_compressed
for caching the result of buf_page_get_state(bpage) == BUF_BLOCK_FILE_PAGE.
------------------------------------------------------------------------
r3868 | marko | 2009-01-09 15:40:11 +0200 (Fri, 09 Jan 2009) | 4 lines
branches/zip: buf_flush_insert_into_flush_list(),
buf_flush_insert_sorted_into_flush_list(): Remove unused code.
Change the parameter to buf_block_t* block and assert that
block->state == BUF_BLOCK_FILE_PAGE. This is part of Issue #155.
------------------------------------------------------------------------
r3873 | marko | 2009-01-09 22:27:40 +0200 (Fri, 09 Jan 2009) | 17 lines
branches/zip: Some non-functional changes related to Issue #155.
buf_page_struct: Note that space and offset are also protected by
buf_pool_mutex. They are only assigned to by
buf_block_set_file_page(). Thus, it suffices for buf_flush_batch() to
hold just buf_pool_mutex when checking these fields.
buf_flush_try_page(): Rename "locked" to "is_s_latched", per Heikki's request.
buf_flush_batch(): Move the common statement mutex_exit(block_mutex)
from all if-else if-else branches before the if block. Remove the
redundant test (buf_pool->init_flush[flush_type] == FALSE) that was
apparently copied from buf_flush_write_complete().
buf_flush_write_block_low(): Note why it is safe not to hold buf_pool_mutex
or block_mutex. Enumerate the assumptions in debug assertions.
------------------------------------------------------------------------
r3874 | marko | 2009-01-09 23:09:06 +0200 (Fri, 09 Jan 2009) | 4 lines
branches/zip: Add comments related to Issue #155.
buf_flush_try_page(): Note why it is safe to access bpage without
holding buf_pool_mutex or block_mutex.
------------------------------------------------------------------------
r3875 | marko | 2009-01-09 23:15:12 +0200 (Fri, 09 Jan 2009) | 11 lines
branches/zip: Non-functional change: Tighten debug assertions and
remove dead code.
buf_flush_ready_for_flush(), buf_flush_try_page(): Assert that
flush_type is one of BUF_FLUSH_LRU or BUF_FLUSH_LIST. The flush_type
comes from buf_flush_batch(), which already asserts this. The
assertion holds for all calls in the source code.
buf_flush_try_page(): Remove the dead case BUF_FLUSH_SINGLE_PAGE
of switch (flush_type).
------------------------------------------------------------------------
r3879 | marko | 2009-01-12 12:46:44 +0200 (Mon, 12 Jan 2009) | 14 lines
branches/zip: Simplify the flushing of dirty pages from the buffer pool.
buf_flush_try_page(): Rename to buf_flush_page(), and change the
return type to void. Replace the parameters space, offset with bpage,
and remove the second page hash lookup. Note and assert that both
buf_pool_mutex and block_mutex must now be held upon entering the
function. They will still be released by this function.
buf_flush_try_neighbors(): Replace buf_flush_try_page() with
buf_flush_page(). Make the logic easier to follow by not negating the
precondition of buf_flush_page().
rb://73 approved by Sunny Bains. This is related to Issue #157.
------------------------------------------------------------------------
r3880 | marko | 2009-01-12 13:24:37 +0200 (Mon, 12 Jan 2009) | 2 lines
branches/zip: buf_flush_page(): Fix a comment that should have been fixed
in r3879. Spotted by Sunny.
------------------------------------------------------------------------
r3881 | marko | 2009-01-12 14:25:22 +0200 (Mon, 12 Jan 2009) | 2 lines
branches/zip: buf_page_get_newest_modification(): Use the block mutex
instead of the buffer pool mutex. This is related to Issue #157.
------------------------------------------------------------------------
r3882 | marko | 2009-01-12 14:40:08 +0200 (Mon, 12 Jan 2009) | 3 lines
branches/zip: struct mtr_struct: Remove the unused field magic_n
unless UNIV_DEBUG is defined. mtr->magic_n is only assigned to
and checked in UNIV_DEBUG builds.
------------------------------------------------------------------------
r3883 | marko | 2009-01-12 14:48:59 +0200 (Mon, 12 Jan 2009) | 1 line
branches/zip: Non-functional change: Use ut_d when assigning to mtr->state.
------------------------------------------------------------------------
r3884 | marko | 2009-01-12 18:56:11 +0200 (Mon, 12 Jan 2009) | 16 lines
branches/zip: Non-functional change: Add some debug assertions and comments.
buf_page_t: Note that the LRU fields are protected by buf_pool_mutex
only, not block->mutex or buf_pool_zip_mutex.
buf_page_get_freed_page_clock(): Note that this is sometimes invoked
without mutex protection.
buf_pool_get_oldest_modification(): Note that the result may be out of
date.
buf_page_get_LRU_position(), buf_page_is_old(): Assert that the buffer
pool mutex is being held.
buf_page_release(): Assert that dirty blocks are in the flush list.
------------------------------------------------------------------------
r3896 | marko | 2009-01-13 09:30:26 +0200 (Tue, 13 Jan 2009) | 2 lines
branches/zip: buf_flush_try_neighbors(): Fix a bug
that was introduced in r3879 (rb://73).
------------------------------------------------------------------------
r3900 | marko | 2009-01-13 10:32:24 +0200 (Tue, 13 Jan 2009) | 1 line
branches/zip: Fix some comments to say buf_pool_mutex.
------------------------------------------------------------------------
r3907 | marko | 2009-01-13 11:54:01 +0200 (Tue, 13 Jan 2009) | 3 lines
branches/zip: row_merge_create_temporary_table(): On error,
row_create_table_for_mysql() already frees new_table.
Do not attempt to free it again.
------------------------------------------------------------------------
r3908 | marko | 2009-01-13 12:34:32 +0200 (Tue, 13 Jan 2009) | 1 line
branches/zip: Enable HASH_ASSERT_OWNED independently of UNIV_SYNC_DEBUG.
------------------------------------------------------------------------
r3914 | marko | 2009-01-13 21:46:22 +0200 (Tue, 13 Jan 2009) | 37 lines
branches/zip: In hash table lookups, assert that the traversed items
satisfy some conditions when UNIV_DEBUG is defined.
HASH_SEARCH(): New parameter: ASSERTION. All users will pass an appropriate
ut_ad() or nothing.
dict_table_add_to_columns(): Assert that the table being added to the data
dictionary cache is not already being pointed to by the name_hash and
id_hash tables.
HASH_SEARCH_ALL(): New macro, for use in dict_table_add_to_columns().
dict_mem_table_free(): Set ut_d(table->cached = FALSE), so that we can
check ut_ad(table->cached) when traversing the hash tables, as in
HASH_SEARCH(name_hash, dict_sys->table_hash, ...) and
HASH_SEARCH(id_hash, dict_sys->table_id_hash, ...).
dict_table_get_low(), dict_table_get_on_id_low(): Assert
ut_ad(!table || table->cached).
fil_space_get_by_id(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(hash, fil_system->spaces, ...).
fil_space_get_by_name(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(name_hash, fil_system->name_hash, ...).
buf_buddy_block_free(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->zip_hash, ...).
buf_page_hash_get(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->page_hash, ...).
get_share(), free_share(): Check ut_ad(share->use_count > 0) in
HASH_SEARCH(table_name_hash, innobase_open_tables, ...).
This was posted as rb://75 for tracking down errors similar to Issue #153.
------------------------------------------------------------------------
r3931 | marko | 2009-01-14 16:06:22 +0200 (Wed, 14 Jan 2009) | 26 lines
branches/zip: Merge revisions 3601:3930 from branches/5.1:
------------------------------------------------------------------------
r3911 | sunny | 2009-01-13 14:15:24 +0200 (Tue, 13 Jan 2009) | 13 lines
branches/5.1: Fix Bug#38187 Error 153 when creating savepoints
InnoDB previously treated savepoints as a stack e.g.,
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- This would delete b and c.
This fix changes the behavior to:
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- Does not delete savepoint c
------------------------------------------------------------------------
r3930 | marko | 2009-01-14 15:51:30 +0200 (Wed, 14 Jan 2009) | 4 lines
branches/5.1: dict_load_table(): If dict_load_indexes() fails,
invoke dict_table_remove_from_cache() instead of dict_mem_table_free(),
so that the data dictionary will not point to freed data.
(Bug #42075, Issue #153, rb://76 approved by Heikki Tuuri)
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
r3572 | marko | 2008-12-17 11:19:56 +0200 (Wed, 17 Dec 2008) | 3 lines
Changed paths:
M /branches/zip/ChangeLog
M /branches/zip/btr/btr0sea.c
M /branches/zip/buf/buf0buf.c
M /branches/zip/buf/buf0lru.c
M /branches/zip/ha/ha0ha.c
M /branches/zip/ha/hash0hash.c
M /branches/zip/include/buf0buf.h
M /branches/zip/include/ha0ha.h
M /branches/zip/include/ha0ha.ic
M /branches/zip/include/hash0hash.h
M /branches/zip/include/univ.i
branches/zip: Introduce UNIV_AHI_DEBUG for debugging the adaptive hash
index without enabling UNIV_DEBUG.
------------------------------------------------------------------------
r3574 | marko | 2008-12-17 12:44:31 +0200 (Wed, 17 Dec 2008) | 2 lines
Changed paths:
M /branches/zip/ChangeLog
branches/zip: ChangeLog: Document recent changes that were not included in
InnoDB Plugin 1.0.2, except changes to source code comments.
------------------------------------------------------------------------
r3575 | marko | 2008-12-17 14:40:58 +0200 (Wed, 17 Dec 2008) | 12 lines
Changed paths:
M /branches/zip/ChangeLog
M /branches/zip/include/row0sel.h
M /branches/zip/include/row0upd.h
M /branches/zip/pars/pars0pars.c
M /branches/zip/row/row0mysql.c
M /branches/zip/row/row0sel.c
M /branches/zip/row/row0upd.c
branches/zip: Remove update-in-place-in-select from the internal SQL
interpreter. It was only used for updating the InnoDB internal data
dictionary when renaming or dropping tables. It could have caused
deadlocks after acquiring latches on insert buffer bitmap pages.
This and r3544 should fix Issue #135.
Furthermore, the update-in-place-in-select does not account for
compression failure. That was not a problem yet, since the InnoDB SQL
interpreter has so far assumed ROW_FORMAT=REDUNDANT.
rb://63 approved by Heikki Tuuri
------------------------------------------------------------------------
The followin mysql-tests failed (and they are known to fail):
main.information_schema [ fail ]
main.innodb_file_per_table_basic[ fail ]
main.type_bit_innodb [ fail ]
Tested against : MYSQL_SERVER_VERSION "5.1.28"
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
UNIV_PAGE_SIZE than the default 16384.
MEM_BLOCK_STANDARD_SIZE: Cap to MEM_MAX_ALLOC_IN_BUF when UNIV_PAGE_SIZE
is less than 16384.
ha_create_func(): Invoke mem_heap_create_in_btr_search() with
ut_min(4096, MEM_MAX_ALLOC_IN_BUF) instead of 4096. The memory
will be allocated from the buffer pool, and with UNIV_PAGE_SIZE
defined to 4096, there would not be any space for the mem_heap
data structure overhead.
Implement a limit on the memory used by the INNODB_TRX, INNODB_LOCKS and
INNODB_LOCK_WAITS tables. The maximum allowed memory is defined with the
macro TRX_I_S_MEM_LIMIT.
Approved by: Marko (via IM)
Add a type that stores chunks of data in its own storage and avoids
duplicates. Supported methods:
ha_storage_create()
Allocates new storage object.
ha_storage_put()
Copies a given data chunk into the storage and returns pointer to the
copy. If the data chunk is already present, a pointer to the existing
object is returned and the given data chunk is not copied.
ha_storage_empty()
Clears (empties) the storage from all data chunks that are stored in it.
ha_storage_free()
Destroys a storage object. Opposite to ha_storage_create().
Approved by: Marko
buf0buf.ic: Remove the extern declaration of buf_dbg_counter.
It was declared static in buf0buf.c in r1025.
ha0ha.c: #include "btr0sea.h" #ifdef UNIV_SYNC_DEBUG. Assertions on
btr_search_latch were added in r1041.
hash index, because it might occupy the chunk we would like to free.
TODO: In btr_search_check_free_space_in_heap(), release the block if
btr_search_latch is not immediately available.
buf_pool_shrink(): Split from buf_pool_resize().
btr_search_disabled: New variable, similar to srv_use_adaptive_hash_indexes
that was removed earlier.
btr_search_disable(): New function: disable and purge the adaptive hash index.
btr_search_enable(): New function: enable the adaptive hash index.
ha_clear(): New function: Empty a hash table and free the memory heaps.
when assigning node->data.
ha_delete(), ha_search_and_delete_if_found(), ha_remove_all_nodes_to_page():
Remove the parameter buf_block_t* block, now that it is stored within the
hash data structure in debug builds.
an assertion failure in debug builds when a context switch occurred in
buf_LRU_search_and_free_block() before the call to
btr_search_drop_page_hash_index() managed to acquire the mutexes again.
ha_node_t: Add the field buf_block_t* block.
ha_search_and_update_if_found(): Rename to ha_search_and_update_if_found_func()
with added buf_block_t* parameter in debug builds. Define the wrapper macro
ha_search_and_update_if_found() that always takes the buf_block_t* parameter.
ha_insert_for_fold(): Rename to ha_insert_for_fold_func()
with added buf_block_t* parameter in debug builds. Define the wrapper macro
ha_insert_for_fold() that always takes the buf_block_t* parameter.
Instead, get buf_block_t* as a parameter.
Without this patch, buf_page_hash_get() would return NULL in
buf_block_align(). The function buf_LRU_search_and_free_block()
invokes buf_LRU_block_remove_hashed_page(), which removes the
hash mapping needed by buf_page_hash_get().
rec_get_nth_field_offs_old(): Split from rec_get_nth_field_old().
rec_get_nth_field_old(): Reimplement as a constness-preserving macro.
dict_drop_index_tree(), dict_truncate_index_tree(): Note that rec is
an in/out parameter, as the B-tree root page number will be updated.
passed as TRUE.
Enclose hash_table_t::adaptive and buf_block_t::n_pointers in
#ifdef UNIV_DEBUG.
btr_search_drop_page_hash_index(): Enclose the corruption check
(which depends on buf_block_t::n_pointers) in #ifdef UNIV_DEBUG.
ut_is_2pow(): New function for testing if a number is zero or a power of two.
Use this function instead of bitwise arithmetics or ut_2_power_up() where
possible.
