DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
The test case rpl_do_grant fails sporadically on PB2 with "Access
denied for user 'create_rout_db'@'localhost' ...". Inspecting the
test case, one may find that if issues a GRANT on the master
connection and immediately after it creates two new connections
(one to the master and one to the slave) using the credentials
set with the GRANT.
Unfortunately, there is no synchronization between master and
slave after the grant and before the connections are
established. This can result in slave not having executed the
GRANT by the time the connection is attempted.
This patch fixes this by deploying a sync_slave_with_master
between the grant and the connections attempt.
The test case creates two temporary tables, then closes the
connection, waits for it to disconnect, then syncs the slave with
the master, checks for remaining opened temporary tables on
slave (which should be 0) and finally drops the used
database (mysqltest).
Unfortunately, sometimes, the test fails with one open table on
the slave. This seems to be caused by the fact that waiting for
the connection to be closed is not sufficient. The test needs to
wait for the DROP event to be logged and only then synchronize
the slave with the master and proceed with the check. This is
caused by the asynchronous nature of the disconnect wrt
binlogging of the DROP temporary table statement.
We fix this by deploying a call to wait_for_binlog_event.inc
on the test case, which makes execution to wait for the DROP
temp tables event before synchronizing master and slave.
Bug#24509 - 2048 file descriptor limit on windows needs increasing, also
WL#3049 - improved Windows I/O
The patch replaces the use of the POSIX I/O interfaces in mysys on Windows with
the Win32 API calls (CreateFile, WriteFile, etc). The Windows HANDLE for the open
file is stored in the my_file_info struct, along with a flag for append mode
because the Windows API does not support opening files in append mode in all cases)
The default max open files has been increased to 16384 and can be increased further
by setting --max-open-files=<value> during the server start.
Another major change in this patch that almost all Windows specific file IO code
has been moved to a new file my_winfile.c, greatly reducing the amount of code
in #ifdef blocks within mysys, thus improving readability.
Minor enhancements:
- my_(f)stat() is changed to use __stati64 structure with 64 file size
and timestamps. It will return correct file size now (C runtime implementation
used to report outdated information)
- my_lock on Windows is prepared to handle additional timeout parameter
- after review : changed __WIN__ to _WIN32 in the new and changed code.
In RBR, There is an inconsistency between slaves and master.
When INSERT statement which includes an auto_increment field is executed,
Store engine of master will check the value of the auto_increment field.
It will generate a sequence number and then replace the value, if its value is NULL or empty.
if the field's value is 0, the store engine will do like encountering the NULL values
unless NO_AUTO_VALUE_ON_ZERO is set into SQL_MODE.
In contrast, if the field's value is 0, Store engine of slave always generates a new sequence number
whether or not NO_AUTO_VALUE_ON_ZERO is set into SQL_MODE.
SQL MODE of slave sql thread is always consistency with master's.
Another variable is related to this bug.
If generateing a sequence number is decided by the values of
table->auto_increment_field_not_null and SQL_MODE(if includes MODE_NO_AUTO_VALUE_ON_ZERO)
The table->auto_increment_is_not_null is FALSE, which causes this bug to appear. ..
This test case uses mysqlbinlog to dump the content of master-bin.000001,
but the content of master-bin.000001 is not that this test needs.
MTR runs a lot of test cases on one server, so when this test starts, the current binlog file
might not be master-bin.000001, or there are other events are written by tests before.
'RESET MASTER' command must be called at the begin, it ensures that binlog of this test
is wrote to master-bin.000001 correctly.
Three other tests have the same problem, They were fixed together.
mysqlbinlog-cp932
binlog_incident
binlog_tmp_table
Postfix.
extra/rpl_tests/rpl_row_sp006.test had changed to fix this bug.
extra/rpl_tests/rpl_row_sp006.test is also referenced by rpl_ndb_sp006,
So rpl_row_sp006.result must be changed too.
Inserting a negative value in the autoincrement column of a
partitioned innodb table was causing the value of the auto
increment counter to wrap around into a very large positive
value. The consequences are the same as if a very large positive
value was inserted into a column, e.g. reduced autoincrement
range, failure to read autoincrement counter.
The current patch ensures that before calculating the next
auto increment value, the current value is within the positive
maximum allowed limit.
Essentially, Bug#45574 results in this bug. The 'CREATE DATABASE IF NOT EXISTS' statement was not
binlogged, when the database has existed.
Sometimes, the master and slaves become inconsistent. The "CREATE DATABASE
IF NOT EXISTS mysqltest1" statement is not binlogged
if the db 'mysqltest1' existed before the test case is executed.
So the db 'mysqltest1' can't be created on slave.
Patch of Bug#45574 has resolved this problem.
But I think it is better to replace 'mysqltest1' by default db 'test'.
If an EVENT is created without the DEFINER clause set explicitly or with it set
to CURRENT_USER, the master and slaves become inconsistent. This issue stems from
the fact that in both cases, the DEFINER is set to the CURRENT_USER of the current
thread. On the master, the CURRENT_USER is the mysqld's user, while on the slave,
the CURRENT_USER is empty for the SQL Thread which is responsible for executing
the statement.
To fix the problem, we do what follows. If the definer is not set explicitly,
a DEFINER clause is added when writing the query into binlog; if 'CURRENT_USER' is
used as the DEFINER, it is replaced with the value of the current user before
writing to binlog.
Slave does not correctly handle "expected errors" leading to inconsistencies
between the mater and slave. Specifically, when a statement changes both
transactional and non-transactional tables, the transactional changes are
automatically rolled back on the master but the slave ignores the error and
does not roll them back thus leading to inconsistencies.
To fix the problem, we automatically roll back a statement that fails on
the slave but note that the transaction is not rolled back unless a "rollback"
command is in the relay log file.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
In STATEMENT based replication, a statement that failed on the master but that
updated non-transactional tables is written to binary log with the error code
appended to it. On the slave, the statement is executed and the same error is
expected. However, when an "expected error" did not happen on the slave and was
either ignored or was related to a concurrency issue on the master, the slave
did not rollback the effects of the statement and as such inconsistencies might
happen.
To fix the problem, we automatically rollback a statement that should have
failed on a slave but succeded and whose expected failure is either ignored or
stems from a concurrency issue on the master.
All committed result differences have either been verified by me or copied from Oracle's provided
results (storage/innodb_plugin/mysql-test/*.result, storage/innodb_plugin/mysql-test/patches).
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
If using statement based replication (SBR), repeatedly calling
statements which are unsafe for SBR will cause a warning message
to be written to the error for each statement. This might lead
to filling up the error log and there is no way to disable this
behavior.
The solution is to only log these message (about statements unsafe
for statement based replication) if the log_warnings option is set.
For example:
SET GLOBAL LOG_WARNINGS = 0;
INSERT INTO t1 VALUES(UUID());
SET GLOBAL LOG_WARNINGS = 1;
INSERT INTO t1 VALUES(UUID());
In this case the message will be printed only once:
[Warning] Statement may not be safe to log in statement format.
Statement: INSERT INTO t1 VALUES(UUID())
If the log_bin_trust_function_creators option is not defined, creating a stored
function requires either one of the modifiers DETERMINISTIC, NO SQL, or READS
SQL DATA. Executing a stored function should also follows the same rules if in
STATEMENT mode. However, this was not happening and a wrong error was being
printed out: ER_BINLOG_ROW_RBR_TO_SBR.
The patch makes the creation and execution compatible and prints out the correct
error ER_BINLOG_UNSAFE_ROUTINE when a stored function without one of the modifiers
above is executed in STATEMENT mode.
to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
