Disabling these two tests as they are affected by this bug / causing PB2 failures
on Windows platforms. Can always disable via include/not_windows.inc if
the bug fix looks like it will take some time.
The problem is that select queries executed concurrently with
a concurrent insert on a MyISAM table could be cached if the
select started after the query cache invalidation but before
the unlock of tables performed by the concurrent insert. This
race could happen because the concurrent insert was failing
to prevent cache of select queries happening at the same time.
The solution is to add a 'uncacheable' status flag to signal
that a concurrent insert is being performed on the table and
that queries executing at the same time shouldn't cache the
results.
mysql-test/r/query_cache_debug.result:
Add test case result for Bug#41098
mysql-test/t/disabled.def:
Re-enable test case.
mysql-test/t/query_cache_debug.test:
Add test case for Bug#41098
sql/sql_cache.cc:
Debug sync point for regression testing purposes.
sql/sql_insert.cc:
Remove meaningless query cache invalidate. There is already
a preceding invalidate for queries that started before the
concurrent insert.
storage/myisam/ha_myisam.cc:
Check for a active concurrent insert.
storage/myisam/mi_locking.c:
Signal the start of a concurrent insert. Flag is zeroed once
the state is updated back.
storage/myisam/myisamdef.h:
Add flag to signal a active concurrent insert.
BUG#42383 2009-01-28 lsoares
"This fails in embedded and on windows. Note that this test is not run
on windows and on embedded in PB for main trees currently"
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
The test reacted on the way how mtr orders arguments for the server
that are gathered from different source. It appeared that the opt-file
options were parsed before those that supplied to mtr via its command
line. In effect, the opt-file preferences got overriden by the command
line and some tests, like no-threads, were caught by surprise: a test
expects an option value that had been "hardcoded" into its opt-file
but gets another one.
This server options ordering problem exists on in the new rpl trees
mtr. In option of the author of this patch, the opt-file shall be
considered as having the highest preference weight. The opt-file is
merely a part of the header of a test, namely a part that can not be
technically deployed along the test file.
It's unnatural for the test writer to provide both the opt file value
and a guard that guarantees the value will be set on in the run time.
It's logical to provide either one: the option and its value or the
guard.
Fixed with relocating parse of the opt file to be the last among
sources of the sever's options.
A side effect: fixing a small problem of resetting the suite options
at time the opt file starts parsing.
A side effect: main.log_bin_trust_function_creators_func is disabled to
be re-enabled with the fixes for bug#41003 will be merged from the main trees.
mysql-test/lib/mtr_cases.pm:
Relocating parse of the opt file to be the last. This ensure the opt file is the last
provider for the server options so that the opt-file options have the highest preference;
fixing a separate issue of incorrect resetting the suite options for the server;
mysql-test/t/disabled.def:
log_bin_trust_function_creators_func is disabled. Todo: to-reable when fixes for bug#41003
will be merged from the main trees.
- remove totally wrong (syntax) entries from disabled.def
- remove entries belonging to deleted tests from disabled.def
- correct the comments (correct the bug mentioned) of entries in disabled.def
- remove never completed tests which were accidently pushed
BUG#39382: innodb_max_dirty_pages_pct_func failed with timeout on pushbuild
Disabled innodb_max_dirty_pages_pct_func.
Please re-enable if the test gets fixed.
mysql-test/t/disabled.def:
Disabled innodb_max_dirty_pages_pct_func.
- disable the test suffering from Bug#41098 Query Cache returns wrong result with
concurrent insert
- additional improvements
Details:
- Move the test for the historic bug
Bug 28249 Query Cache returns wrong result with concurrent insert / certain lock
into its own testscript query_cache_28249.test.
- query_cache.test:
- replace error numbers with error names
- remove trailing spaces, replace tabs with spaces
- reset of @@global.log_bin_trust_function_creators to its original value
at the end of the test
- query_cache_28249.test:
- replace sleep 5 with poll routine
- avoid random differences caused by concurrent_inserts effects
- improved comments and formatting
Re-enabling this test in 5.1 tree since the bug that caused disabling
(Bug#33696 CSV storage engine allows nullable colums via ALTER TABLE statements)
doesn't appear in 5.1 (6.0 only)
Recorded .result file and removed test from the main.disabled.def file.
Bug#39848 events_bugs fails sporadically on pushbuild
(missing rows in table event_log)
Details: Reimplement the subtest for BUG 28924
- check if the number of rows within the table
event_log changes but don't print rows
because the number varies depending on
load on testing box
- shift DROP USER befor DROP EVENT
= Subtest fits again to old bug
- remove no more needed comments + variables
Bug#39863 events_bugs fails sporadically on pushbuild
(extra processes in I_S.PROCESSLIST)
Details: Abort with appropriate message to the protocol if
release_lock() does not has the intended effect.
This cannot prevent problems caused by the probably
buggy release_lock() but it reveals if we had a
problem in this area.
Bug#39978 main.events_bugs does not clean up
Detail: Restore global.event_scheduler = ON at end of test
Bug#39569 events_bugs fails sporadically on pushbuild
(should have failed with errno 1539)
Detail: Set $wait_timeout to 4 instead of 2
- Fix two instabilities (result sets pulled from processlist in
subtest for bug 16407) which were found during tests with high
parallel I/O load
- Minor improvements of formatting
Details:
- Add comments
- Remove tabs and trailing blanks
- Add line breaks for better readability
- Updated slow_query_log_file_basic and general_log_file basis instead of the func version as
the func version run good but the basic versions fail.
- Sent innodb.test to dev@innodb.com.
- variables.test has differences probably due to a bug in mtr or in the SET statement (see bug#39369).
- general_log_file_basic.test and slow_query_log_file_bsaic.test have differences, which might be
produced by the new mtr (see bug#38124).
manually resolved conflicts:
Text conflict in client/mysqltest.c
Contents conflict in mysql-test/include/have_bug25714.inc
Text conflict in mysql-test/include/have_ndbapi_examples.inc
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/suite/parts/inc/partition_check_drop.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check1.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check2.inc
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_basic_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_symlink_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_engine_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_syntax_myisam.result
Text conflict in mysql-test/suite/rpl_ndb/t/disabled.def
Text conflict in mysql-test/t/disabled.def
mysqltest disconnect/connect-combo could be so
quick that connect would hit the server before
it had processed the disconnect. Since that
resulted in one more concurrent connection than
we meant to have, global or per-user
max-user-connections could be exceeded.
This could lead to "random" failures in tests
that set those limits.
client/mysqltest.c:
Retry max-connect-retries times if connect in
connect_n_handle_errors() unexpectedly fails
on connection-limit as this could be a race.
Break out code that checks for expected --errors
into its own function.
mysql-test/r/mysqltest.result:
show that we throw a warning if test expects a SQL-state from
a command (diff_files, ...) that clearly can't produce one.
mysql-test/t/disabled.def:
re-enable user_limits
mysql-test/t/mysqltest.test:
show that we throw a warning if test expects a SQL-state from
a command (diff_files, ...) that clearly can't produce one.
Problem 1: tests often fail in pushbuild with a timeout when waiting
for the slave to start/stop/receive error.
Fix 1: Updated the wait_for_slave_* macros in the following way:
- The timeout is increased by a factor ten
- Refactored the macros so that wait_for_slave_param does the work for
the other macros.
Problem 2: Tests are often incorrectly written, lacking a
source include/wait_for_slave_to_[start|stop].inc.
Fix 2: Improved the chance to get it right by adding
include/start_slave.inc and include/stop_slave.inc, and updated tests
to use these.
Problem 3: The the built-in test language command
wait_for_slave_to_stop is a misnomer (does not wait for the slave io
thread) and does not give as much debug info in case of failure as
the otherwise equivalent macro
source include/wait_for_slave_sql_to_stop.inc
Fix 3: Replaced all calls to the built-in command by a call to the
macro.
Problem 4: Some, but not all, of the wait_for_slave_* macros had an
implicit connection slave. This made some tests confusing to read,
and made it more difficult to use the macro in circular replication
scenarios, where the connection named master needs to wait.
Fix 4: Removed the implicit connection slave from all
wait_for_slave_* macros, and updated tests to use an explicit
connection slave where necessary.
Problem 5: The macros wait_slave_status.inc and wait_show_pattern.inc
were unused. Moreover, using them is difficult and error-prone.
Fix 5: remove these macros.
Problem 6: log_bin_trust_function_creators_basic failed when running
tests because it assumed @@global.log_bin_trust_function_creators=1,
and some tests modified this variable without resetting it to its
original value.
Fix 6: All tests that use this variable have been updated so that
they reset the value at end of test.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Replaced wait_for_slave_to_stop by include/wait_for_slave_sql_to_stop.inc
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Replaced wait_for_slave_to_stop by include/wait_for_slave_sql_to_stop.inc
Added connection slave since includ/wait_for_slave_sql_to_stop.inc
does not do that anymore.
mysql-test/extra/rpl_tests/rpl_log.test:
Replaced start slave+wait_slave_status by start_slave.inc
mysql-test/include/reset_master_and_slave.inc:
replaced start/stop slave by start_slave.inc/stop_slave.inc
mysql-test/include/sync_slave_io_with_master.inc:
Improved comments and error message.
mysql-test/include/wait_for_slave_io_to_stop.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_for_slave_param.inc:
- Improved usage instructions
- Added more debug info in case of timeout
- Added parameters $slave_param_comparison, $slave_timeout,
$slave_keep_connection, $slave_error_message
mysql-test/include/wait_for_slave_sql_error.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_for_slave_sql_to_start.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_for_slave_sql_to_stop.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_for_slave_to_start.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_for_slave_to_stop.inc:
Refactored to use wait_for_slave_param.inc.
Removed connection slave.
mysql-test/include/wait_show_pattern.inc:
Removed unused (and error-prone) file
mysql-test/include/wait_slave_status.inc:
Removed unused (and error-prone) file
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
Renamed $keep_connection to $slave_keep_connection.
mysql-test/suite/rpl/t/rpl_bug26395.test:
Replace stop slave by stop_slave.inc
mysql-test/suite/rpl/t/rpl_circular_for_4_hosts.test:
Replace start/stop slave by start_slave.inc/stop_slave.inc.
Replace wait_for_slave_param by wait_for_slave_sql_to_stop.inc.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Renamed $keep_connection to $slave_keep_connection.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
Replace wait_slave_status by start_slave.inc
mysql-test/suite/rpl/t/rpl_idempotency.test:
Added connection slave since wait_for_slave_sql_to_stop.inc does not
do that any more.
mysql-test/suite/rpl/t/rpl_incident.test:
Replaced wait_for_slave_to_stop by wait_for_slave_sql_to_stop.inc
mysql-test/suite/rpl/t/rpl_init_slave.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
Replaced save_master_pos;connection slave;sync_with_master by
sync_slave_with_master.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
Replaced wait_for_slave_param by other wait_for_slave_* macros.
mysql-test/suite/rpl/t/rpl_packet.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_row_inexist_tbl.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_row_stop_middle_update.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_row_until.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
Replaced save_master_pos;connection slave;sync_with_master by
sync_slave_with_master.
mysql-test/suite/rpl/t/rpl_server_id1.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_slave_grp_exec.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_slave_status.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/suite/rpl/t/rpl_sp.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/suite/rpl/t/rpl_sp_effects.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
Replaced save_master_pos;connection slave;sync_with_master by
sync_slave_with_master.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Replaced start slave by start_slave.inc.
Added explicit connection slave since wait_for_slave_sql_to_stop.inc
does not do that anymore.
mysql-test/t/disabled.def:
Disabled failing test.
mysql-test/t/func_time.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/grant.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/grant2.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/innodb_notembedded.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/log_bin_trust_function_creators_func.test:
Restore @@global.log_bin_trust_function_creators at end of test.
Clean up at end of test by dropping the created user.
mysql-test/t/query_cache.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/query_cache_notembedded.test:
Restore @@global.log_bin_trust_function_creators at end of test.
mysql-test/t/rpl_init_slave_func.test:
Replaced start/stop slave by start_slave.inc/stop_slave.inc.
mysql-test/t/timezone2.test:
Restore @@global.log_bin_trust_function_creators at end of test.
This is not a fix, it just disables the erroneous test cases.
mysql-test/t/disabled.def:
Disabled a number of new tests that contain sleeps and that
have not been checked for race conditions. At least some of
them contain race conditions.
Made the test innodb_max_dirty_pages_pct_func clean up after itself.
mysql-test/r/innodb_max_dirty_pages_pct_func.result:
Updated result file.
mysql-test/t/disabled.def:
Fixed BUG#37906
mysql-test/t/innodb_max_dirty_pages_pct_func.test:
Made the test clean up after itself.
The failing test case is depending on unnecessary status variable output
which changes based on build configuration. By reducing the output the test
becomes more stable.
mysql-test/r/status.result:
Modified test case
mysql-test/t/disabled.def:
Enabled status.test
mysql-test/t/status.test:
Modified test case.
into bodhi.(none):/opt/local/work/mysql-5.1-27430
Makefile.am:
Auto merged
include/my_global.h:
Auto merged
mysql-test/include/mix1.inc:
Auto merged
sql/item.cc:
Auto merged
sql/my_decimal.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/sp.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/share/errmsg.txt:
Auto merged
sql/sql_yacc.yy:
Auto merged
libmysqld/CMakeLists.txt:
Manual merge.
libmysqld/lib_sql.cc:
Manual merge.
mysql-test/t/disabled.def:
Manual merge.
max_heap_table_size_basic_32, query_cache_size_basic_32 and
tmp_table_size_basic_32 tests have been disabled according to
bug #36522.
mysql-test/t/disabled.def:
max_heap_table_size_basic_32, query_cache_size_basic_32 and
tmp_table_size_basic_32 tests have been disabled according to
bug #36522.
FLUSH STATUS doesn't clear the values of the global status variables.
The test case is reduced to testing session local Com-variables until
FLUSH GLOBAL STATUS is implemented.
mysql-test/r/status.result:
Reduce test to testing session status until 'FLUSH GLOBAL STATUS' is
implemented.
mysql-test/t/disabled.def:
Enable main.status.test.
mysql-test/t/status.test:
Reduce test to testing session status until 'FLUSH GLOBAL STATUS' is
implemented.
- a 64 bit compile warning in embedded
- disabled the new (and failing tests for Bug#36522
libmysqld/lib_sql.cc:
Fixed: win64 warning
mysql-test/t/disabled.def:
Disabled the new (and failing) tests for 36522
Enable previously disabled test cases which were tested against
the embedded build. The test cases are modified so that they require
non-embedded build.
mysql-test/t/disabled.def:
Re-enabled event_scheduler_basic and event_scheduler_func since
these tests aren't suppose to work in embedded build anyway.
mysql-test/t/event_scheduler_basic.test:
Require that this test isn't run on embedded build
mysql-test/t/event_scheduler_func.test:
Require that this test isn't run on embedded build
