Sometimes, in MariaDB Server 10.5 but apparently not in later branches,
the test would hang because con1 and con2 would be blocked in
debug_sync (for example, lock_wait_suspend_thread_enter and
row_ins_sec_index_entry_dup_locks_created) and therefore blocking
the purge of transactions from completing.
To prevent an occasional DEBUG_SYNC induced hang in the test, we will
wait for everything to be purged, except the last 2 transactions.
This change should be null-merged to 10.6, because the test is not
failing in 10.6 or later major versions.
Hash index is vcol-based wrapper (MDEV-371). row_end is added to
unique index. So when row_end is updated unique hash index must be
recalculated via vcol_update_fields(). DELETE did not update virtual
fields, so DELETE HISTORY was getting wrong hash value.
The fix does update_virtual_fields() on vers_update_end() so in every
case row_end is updated virtual fields are updated as well.
work consistently on replication
Row-based replication does not execute CREATE .. SELECT but instead
CREATE TABLE. CREATE .. SELECT creates implict system fields on
unusual place: in-between declared fields and select fields. That was
done because select_field_pos logic requires select fields go last in
create_list.
So, CREATE .. SELECT on master and CREATE TABLE on slave create system
fields on different positions and replication gets field mismatch.
To fix this we've changed CREATE .. SELECT to create implicit system
fields on usual place in the end and updated select_field_pos for
handling this case.
When calculate_cond_selectivity_for_table() takes into account multi-
column selectivities from range access, it tries to take-into account
that selectivity for some columns may have been already taken into account.
For example, for range access on IDX1 using {kp1, kp2}, the selectivity
of restrictions on "kp2" might have already been taken into account
to some extent.
So, the code tries to "discount" that using rec_per_key[] estimates.
This seems to be wrong and unreliable: the "discounting" may produce a
rselectivity_multiplier number that hints that the overall selectivity
of range access on IDX1 was greater than 1.
Do a conservative fix: if we arrive at conclusion that selectivity of
range access on condition in IDX1 >1.0, clip it down to 1.
row_purge_reset_trx_id(): Reserve large enough offsets for accomodating
the maximum width PRIMARY KEY followed by DB_TRX_ID,DB_ROLL_PTR.
Reviewed by: Thirunarayanan Balathandayuthapani
Don't allow the referencing key column from NULL TO NOT NULL
when
1) Foreign key constraint type is ON UPDATE SET NULL
2) Foreign key constraint type is ON DELETE SET NULL
3) Foreign key constraint type is UPDATE CASCADE and referenced
column declared as NULL
Don't allow the referenced key column from NOT NULL to NULL
when foreign key constraint type is UPDATE CASCADE
and referencing key columns doesn't allow NULL values
get_foreign_key_info(): InnoDB sends the information about
nullability of the foreign key fields and referenced key fields.
fk_check_column_changes(): Enforce the above rules for COPY
algorithm
innobase_check_foreign_drop_col(): Checks whether the dropped
column exists in existing foreign key relation
innobase_check_foreign_low() : Enforce the above rules for
INPLACE algorithm
dict_foreign_t::check_fk_constraint_valid(): This is used
by CREATE TABLE statement to check nullability for foreign
key relation.
Added new test scenario in galera.galera_bf_kill
test to make the issue surface. The tetst scenario has
a multi statement transaction containing a KILL command.
When the KILL is submitted, another transaction is
replicated, which causes BF abort for the KILL command
processing. Handling BF abort rollback while executing
KILL command causes node hanging, in this scenario.
sql_kill() and sql_kill_user() functions have now fix,
to perform implicit commit before starting the KILL command
execution. BEcause of the implicit commit, the KILL execution
will not happen inside transaction context anymore.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Add wait_until_ready waits after wsrep_on is set on again to
make sure that node is ready for next step before continuing.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Stabilize test by reseting DEBUG_SYNC and add wait_condition
for expected table contents.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
The failing test case validates Seconds_Behind_Master for a delayed
slave, while STOP SLAVE is executed during a delay. The test fixes
initially added to the test (commit b04c857596) added a table lock
to ensure a transaction could not finish before validating the
Seconds_Behind_Master field after SLAVE START, but did not address a
possibility that the transaction could finish before running the
STOP SLAVE command, which invalidates the validations for the rest
of the test case. Specifically, this would result in 1) a timeout in
“Waiting for table metadata lock” on the replica, which expects the
transaction to retry after slave restart and hit a lock conflict on
the locked tables (added in b04c857596), and 2) that
Seconds_Behind_Master should have increased, but did not.
The failure can be reproduced by synchronizing the slave to the master
before the MDEV-32265 echo statement (i.e. before the SLAVE STOP).
This patch fixes the test by adding a mechanism to use DEBUG_SYNC to
synchronize a MASTER_DELAY, rather than continually increase the
duration of the delay each time the test fails on buildbot. This is
to ensure that on slow machines, a delay does not pass before the
test gets a chance to validate results. Additionally, it decreases
overall test time because the test can continue immediately after
validation, thereby bypassing the remainder of a full delay for each
transaction.
In the bug report MDEV-32817 it occurred that the function
row_mysql_get_table_status() is outputting a fil_space_t*
as if it were a numeric tablespace identifier.
ib_push_warning(): Remove. Let us invoke push_warning_printf() directly.
innodb_decryption_failed(): Report a decryption failure and set the
dict_table_t::file_unreadable flag. This code was being duplicated in
very many places. We return the constant value DB_DECRYPTION_FAILED
in order to avoid code duplication in the callers and to allow tail calls.
innodb_fk_error(): Report a FOREIGN KEY error.
dict_foreign_def_get(), dict_foreign_def_get_fields(): Remove.
This code was being used in dict_create_add_foreign_to_dictionary()
in an apparently uncovered code path. That ib_push_warning() call
would pass the integer i+1 instead of a pointer to NUL terminated
string ("%s"), and therefore the call should have resulted in a crash.
dict_print_info_on_foreign_key_in_create_format(),
innobase_quote_identifier(): Add const qualifiers.
row_mysql_get_table_error(): Replaces row_mysql_get_table_status().
Display no message on DB_CORRUPTION; it should be properly reported at
the SQL layer anyway.
MySQL-Connector-Net casts SEQ_IN_INDEX to uint and will
raise an exception if the type is a System.Int64.
As we don't support a huge number of multi-columns in
an index reducing to a uint is sufficient to represent
all values and maintain compatibility with MySQL-Connector-Net.
This matches the type (uint) returned by MySQL-8.3 and 8.0.
Reviewer: Alexander Barkov <bar@mariadb.com>
It's possible that MDL conflict handling code is called more
than once for a transaction when:
- it holds more than one conflicting MDL lock
- reschedule_waiters() is executed,
which results in repeated attempts to BF-abort already aborted
transaction.
In such situations, it might be that BF-aborting logic sees
a partially rolled back transaction and erroneously decides
on future actions for such a transaction.
The specific situation tested and fixed is when a SR transaction
applied in the node gets BF-aborted by a started TOI operation.
It's then caught with the server transaction already rolled back,
but with no MDL locks yet released. This caused wrong state
detection for such a transaction during repeated MDL conflict
handling code execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Fixes galera.galera_bf_kill_debug test case.
* Enable galera_ssl_upgrade, galera_ssl_reload, galera_pc_bootstrap
* Add MDEV to disabled tests that miss it
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Based on logs SST was started before donor reached
Primaty state. Add wait_conditions to make sure that
nodes reach Primary state before starting next node.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
For TOI events specifically we have a situation where in case of the
same error different nodes may generate different messages. This may
be for two reasons:
- different locale setting between the current client session and
server default (we can reasonably require server locales to be
identical on all nodes, but user can change message locale for the
session)
- non-deterministic course of STATEMENT execution e.g. for ALTER TABLE
On the other hand we may reasonably expect TOI event failures since
they are executed after replication, so we must ensure that voting is
consistent. For that purpose error codes should be sufficiently unique
and deterministic for TOI event failures as DDLs normally deal with
a single object, so we can merely use MySQL error codes to vote on.
Notice that this problem does not happen with regular transactional
writesets, since the originator node will always vote success and
replica nodes are assumed to have the same global locale setting.
As such different error messages indicate different errors even if
the error code is the same (e.g. ER_DUP_KEY can happen on different
rows tables).
Use only MySQL error code (without the error message) for error voting
in case of TOI event failure.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that wsrep_schema tables were not marked as
category information. Fix allows access to wsrep_schema
tables even when node is detached.
This is 10.4-10.9 version of fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The test was expecting the I/O thread to be in a specific state, but thread
scheduling may cause it to not yet have reached that state. So just have a
loop that waits for the expected state to occur.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Remove the test for MDEV-14528. This is supposed to test that parallel
replication from pre-10.0 master will update Seconds_Behind_Master. But
after MDEV-12179 the SQL thread is blocked from even beginning to fetch
events from the relay log due to FLUSH TABLES WITH READ LOCK, so the test
case is no longer testing what is was intended to. And pre-10.0 versions are
long since out of support, so does not seem worthwhile to try to rewrite the
test to work another way.
The root cause of the test failure is MDEV-34778. Briefly, depending on
exact timing during slave stop, the rli->sql_thread_caught_up flag may end
up with different value. If it ends up as "true", this causes
Seconds_Behind_Master to be 0 during next slave start; and this caused test
case timeout as the test was waiting for Seconds_Behind_Master to become
non-zero.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Depending on timing, an extra event run could start just when the event
scheduler is shut down and delay running until after the table has been
dropped; this would cause the test to fail with a "table does not exist"
error in the log.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
- Added plugin_debug.test, multiple_index.test to innodb_fts suite
from mysql-5.7.
- commit c5b28e55f6 removes the warning
for InnoDB rebuilding table to add FTS_DOC_ID
- multiple_index test case has MATCH(a) values are smaller
than in MySQL because ROLLBACK updates the stat_n_rows.
- st_mysql_ftparser_boolean_info structure conveys boolean
metadata to mysql search engine for every word in the query.
This structure misses the position value to store the correct
offset of every word. So phrase search queries in plugin_debug
test case with boolean mode for simple parser throws
wrong result.
int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)
CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.
At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.
At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Assertion `table->field[0]->ptr >= table->record[0] &&
table->field[0]->ptr <= table->record[0] + table->s->reclength' failed in
handler::assert_icp_limitations.
table->move_fields has some limitations:
1. It cannot be used in cascade
2. It should always have a restoring pair.
Rule 1 is covered by assertions in handler::assert_icp_limitations
and handler::ptr_in_record (commit 30894fe9a9).
Rule 2 should be manually maintained with care. Hopefully, the rule 1 assertions
may sometimes help as well.
In ha_myisam::repair, both rules are broken. table->move_fields is used
asymmetrically there: it is set on every param->fix_record call
(i.e. in compute_vcols) but is restored only once, in the end of repair.
The reason to updating field ptr's for every call is that compute_vcols can
(supposedly) be called in parallel, that is, with the same table, but different
records.
The condition to "unmove" the pointers in ha_myisam::restore_vcos_after_repair
is incorrect, when stored vcols are available, and myisam stores a VIRTUAL field
if it's the only field in the table (the record cannot be of zero length).
This patch solves the problem by "unmoving" the pointers symmetrically, in
compute_vcols. That is, both rules will be preserved maintained.
Modified node config with longer timeouts for suspect,
inactive, install and wait_prim timeout. Increased
node_1 weight to keep it primary component when
other nodes are voted out.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Fixed used configuration and added suppression for warning
message. Test case changes only.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Modified test configuration file to use wsrep_sync_wait
to make sure committed transactions are replicated before
next operation.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Reason:
======
- InnoDB fails to load the instant alter table metadata from
clustered index while loading the table definition.
The reason is that InnoDB metadata blob has the column length
exceeds maximum fixed length column size.
Fix:
===
- InnoDB should treat the long fixed length column as variable
length fields that needs external storage while initializing
the field map for instant alter operation
Problem:
========
- After the commit ada1074bb1 (MDEV-14398)
fil_crypt_set_encrypt_tables() iterates through all tablespaces to
fill the default_encrypt tables list. This was a trigger to
encrypt or decrypt when key rotation age is set to 0. But import
tablespace does call fil_crypt_set_encrypt_tables() unnecessarily.
The motivation for the call is to signal the encryption threads.
Fix:
====
ha_innobase::discard_or_import_tablespace: Remove the
fil_crypt_set_encrypt_tables() and add the import tablespace
to the default encrypt list if necessary
- commit 85db534731 (MDEV-33400)
retains the instantness in the table definition after discard
tablespace. So there is no need to assign n_core_null_bytes
during instant table preparation unless they are not
initialized.
