There are separate flags DBUG_OFF for disabling the DBUG facility
and ENABLED_DEBUG_SYNC for enabling the DEBUG_SYNC facility.
Let us allow debug builds without DEBUG_SYNC.
Note: For CMAKE_BUILD_TYPE=Debug, CMakeLists.txt will continue to
define ENABLED_DEBUG_SYNC.
In commit 28325b0863
a compile-time option was introduced to disable the macros
DBUG_ENTER and DBUG_RETURN or DBUG_VOID_RETURN.
The parameter name WITH_DBUG_TRACE would hint that it also
covers DBUG_PRINT statements. Let us do that: WITH_DBUG_TRACE=OFF
shall disable DBUG_PRINT() as well.
A few InnoDB recovery tests used to check that some output from
DBUG_PRINT("ib_log", ...) is present. We can live without those checks.
Reviewed by: Vladislav Vaintroub
Making changes to wsrep_mysqld.h causes large parts of server code to
be recompiled. The reason is that wsrep_mysqld.h is included by
sql_class.h, even tough very little of wsrep_mysqld.h is needed in
sql_class.h. This commit introduces a new header file, wsrep_on.h,
which is meant to be included from sql_class.h, and contains only
macros and variable declarations used to determine whether wsrep is
enabled.
Also, header wsrep.h should only contain definitions that are also
used outside of sql/. Therefore, move WSREP_TO_ISOLATION* and
WSREP_SYNC_WAIT macros to wsrep_mysqld.h.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Log MDL state transitions. Trace-friendly message
format. DBUG_LOCK_FILE replaced by thread-local storage.
Logged states legend:
Seized lock was acquired without waiting
Waiting lock is waiting
Acquired lock was acquired after waiting
Released lock was released
Deadlock lock was aborted due to deadlock
Timeout lock was aborted due to timeout >0
Nowait lock was aborted due to zero timeout
Killed lock was aborted due to kill message
OOM can not acquire because out of memory
Usage:
mtr --mysqld=--debug=d,mdl,query:i:o,/tmp/mdl.log
Cleanup from garbage messages:
sed -i -re \
'/(mysql|performance_schema|sys|mtr)\// d; /MDL_BACKUP_/ d' \
/tmp/mdl.log
This commit implements two phase binloggable ALTER.
When a new
@@session.binlog_alter_two_phase = YES
ALTER query gets logged in two parts, the START ALTER and the COMMIT
or ROLLBACK ALTER. START Alter is written in binlog as soon as
necessary locks have been acquired for the table. The timing is
such that any concurrent DML:s that update the same table are either
committed, thus logged into binary log having done work on the old
version of the table, or will be queued for execution on its new
version.
The "COMPLETE" COMMIT or ROLLBACK ALTER are written at the very point
of a normal "single-piece" ALTER that is after the most of
the query work is done. When its result is positive COMMIT ALTER is
written, otherwise ROLLBACK ALTER is written with specific error
happened after START ALTER phase.
Replication of two-phase binloggable ALTER is
cross-version safe. Specifically the OLD slave merely does not
recognized the start alter part, still being able to process and
memorize its gtid.
Two phase logged ALTER is read from binlog by mysqlbinlog to produce
BINLOG 'string', where 'string' contains base64 encoded
Query_log_event containing either the start part of ALTER, or a
completion part. The Query details can be displayed with `-v` flag,
similarly to ROW format events. Notice, mysqlbinlog output containing
parts of two-phase binloggable ALTER is processable correctly only by
binlog_alter_two_phase server.
@@log_warnings > 2 can reveal details of binlogging and slave side
processing of the ALTER parts.
The current commit also carries fixes to the following list of
reported bugs:
MDEV-27511, MDEV-27471, MDEV-27349, MDEV-27628, MDEV-27528.
Thanks to all people involved into early discussion of the feature
including Kristian Nielsen, those who helped to design, implement and
test: Sergei Golubchik, Andrei Elkin who took the burden of the
implemenation completion, Sujatha Sivakumar, Brandon
Nesterenko, Alice Sherepa, Ramesh Sivaraman, Jan Lindstrom.
This adds following new thread states:
* waiting to execute in isolation - DDL is waiting to execute in TOI mode.
* waiting for TOI DDL - some other statement is waiting for DDL to complete.
* waiting for flow control - some statement is paused while flow control is in effect.
* waiting for certification - the transaction is being certified.
It was possibile for a user to create an interlocked state which may go on
for a significant period of time. There is a tight loop in the FTWRL code
path that tries to repeatedly acquire a read lock. As the weight of FTWRL
lock is the smallest among others, it's always selected by the deadlock
detector, but can never be killed.
Imaging the following sequence:
connection_0 connection_1
GET_LOCK("l1", 0);
LOCK TABLES t WRITE;
FLUSH TABLES WITH READ LOCK;
GET_LOCK("l1", 1000);
The GET_LOCK statement in connection_1 triggers the deadlock detector,
which tries to select the lock in FTWRL, since its weight is 0. However,
since a loop in Global_read_lock::lock_global_read_lock() tries to always
win, it tries to acquire lock again. Which invokes the deadlock detector,
and that cycle continues until GET_LOCK in connection_1 times out.
This patch resolves the live-locking by introducing a dynamic bonus to the
deadlock weight associated with every lock. Each lock gets a bonus weight
each time it's selected by the deadlock detector. In case of a live-lock
situation, those locks that cannot be killed, get additional weight each
iteration. Eventually their weight becomes so high that the deadlock
detector shifts its attention to other lock, until it find the one that
can be killed.
Some DML operations on tables having unique secondary keys cause scanning
in the secondary index, for instance to find potential unique key violations
in the seconday index. This scanning may involve GAP locking in the index.
As this locking happens also when applying replication events in high priority
applier threads, there is a probabality for lock conflicts between two wsrep
high priority threads.
This PR avoids lock conflicts of high priority wsrep threads, which do
secondary index scanning e.g. for duplicate key detection.
The actual fix is the patch in sql_class.cc:thd_need_ordering_with(), where
we allow relaxed GAP locking protocol between wsrep high priority threads.
wsrep high priority threads (replication appliers, replayers and TOI processors)
are ordered by the replication provider, and they will not need serializability
support gained by secondary index GAP locks.
PR contains also a mtr test, which exercises a scenario where two replication
applier threads have a false positive conflict in GAP of unique secondary index.
The conflicting local committing transaction has to replay, and the test verifies
also that the replaying phase will not conflict with the latter repllication applier.
Commit also contains new test scenario for galera.galera_UK_conflict.test,
where replayer starts applying after a slave applier thread, with later seqno,
has advanced to commit phase. The applier and replayer have false positive GAP
lock conflict on secondary unique index, and replayer should ignore this.
This test scenario caused crash with earlier version in this PR, and to fix this,
the secondary index uniquenes checking has been relaxed even further.
Now innodb trx_t structure has new member: bool wsrep_UK_scan, which is set to
true, when high priority thread is performing unique secondary index scanning.
The member trx_t::wsrep_UK_scan is defined inside WITH_WSREP directive, to make
it possible to prepare a MariaDB build where this additional trx_t member is
not present and is not used in the code base. trx->wsrep_UK_scan is set to true
only for the duration of function call for: lock_rec_lock() trx->wsrep_UK_scan
is used only in lock_rec_has_to_wait() function to relax the need to wait if
wsrep_UK_scan is set and conflicting transaction is also high priority.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
