BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
Add code to waiting for a set of errors.
Add code to waiting for an error instead of waiting for io thread to stop, as
after 'START SLAVE', the status of io thread is still not running.
But it doesn't mean slave io thread encounters an error.
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
libmysqld/CMakeLists.txt:
Add new files to the build list.
libmysqld/Makefile.am:
Add new files to the build list.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Add test case for Bug#42643
mysql-test/include/mix1.inc:
Update test case as TRUNCATE TABLE now grabs a exclusive lock.
Ensure that TRUNCATE waits for granted locks on the table.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
As with other data modifying statements, TRUNCATE is still not
possible in a transaction with isolation level READ COMMITTED
or READ UNCOMMITED. It would be possible to implement so, but
it is not worth the effort.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Test under different binlog formats.
mysql-test/suite/binlog/t/disabled.def:
Re-enable test case.
mysql-test/t/innodb_bug38231.test:
Truncate no longer works with row-level locks.
mysql-test/t/mdl_sync.test:
Ensure that a acquired lock is not given up due to a conflict.
mysql-test/t/partition_innodb_semi_consistent.test:
End transaction as to release metadata locks.
mysql-test/t/truncate.test:
A metadata lock is now taken before the object is verified.
sql/CMakeLists.txt:
Add new files to the build list.
sql/Makefile.am:
Add new files to the build list.
sql/datadict.cc:
Introduce a new file specific for data dictionary operations.
sql/datadict.h:
Add header file.
sql/sql_base.cc:
Rename data dictionary function.
sql/sql_bitmap.h:
Include dependency.
sql/sql_delete.cc:
Move away from relying on mysql_delete() to delete all rows of
a table. Thus, move any bits related to truncate to sql_truncate.cc
sql/sql_delete.h:
Remove parameter.
sql/sql_parse.cc:
Add protection against the global read lock -- a intention
exclusive lock can be acquired in the truncate path.
sql/sql_show.cc:
Add sync point for testing scenarios where a pending flush
is ignored.
sql/sql_truncate.cc:
Acquire a shared metadata lock before accessing table metadata.
Upgrade the lock to a exclusive one if the table can be re-created.
Rework binlog rules to better reflect the requirements.
sql/sql_yacc.yy:
Set appropriate lock types for table to be truncated.
sql/table.h:
Move to data dictionary header.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
The test was used to fail because of
UPDATE t3,t4 SET t3.a=t4.a + bug27417(1);
did not prescribe the order of two row operations implied by the update.
Fixed with forcing the order with adding a where condition w/o
affecting the former bug fixes logics.
mysql-test/extra/binlog_tests/mix_innodb_myisam_side_effects.test:
implemented the bug page suggestion to make a test deterministic.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
results are updated and (!) corrected.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
results are updated
of sync
In RBR, sometimes the table->s->last_null_bit_pos can be zero. This
has impact at the slave when it compares records fetched from the
storage engine against records in the binary log event. If
last_null_bit_pos is zero the slave, while comparing in
log_event.cc:record_compare function, would set all bits in the last
null_byte to 1 (assumed all 8 were unused) . Thence it would loose the
ability to distinguish records that were similar in contents except
for the fact that some field was null in one record, but not in the
other. Ultimately this would cause wrong matches, and in the specific
case depicted in the bug report the same record would be updated
twice, resulting in a lost update.
Additionally, in the record_compare function the slave was setting the
X bit unconditionally. There are cases that the X bit does not exist
in the record header. This could also lead to wrong matches between
records.
We fix both by conditionally resetting the bits: (i) unused null_bits
are set if last_null_bit_pos > 0; (ii) X bit is set if
HA_OPTION_PACK_RECORD is in use.
mysql-test/extra/rpl_tests/rpl_record_compare.test:
Shared part of the test case for MyISAM and InnoDB.
mysql-test/suite/rpl/t/rpl_row_rec_comp_innodb.test:
InnoDB test case.
mysql-test/suite/rpl/t/rpl_row_rec_comp_myisam.test:
MyISAM test case. Added also coverage for Field_bits case.
sql/log_event.cc:
Deployed conditional setting of unused bits at record_compare.
sql/log_event_old.cc:
Same change as in log_event.cc.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/extra/rpl_tests/rpl_innodb.test:
Removed comments from the test case that became false after the patch.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/include/ctype_utf8_table.inc:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/r/ctype_cp932_binlog_stm.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_database.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the unsafe message.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_row_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_drop.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl000013.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Suppressed warning messages.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
mysql-test/suite/rpl/t/rpl_temporary.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
Updated the test case to remove references to positions
in the binary log.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Updated the test case to remove references to positions
in the binary log.
mysql-test/t/create_select_tmp.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/ctype_cp932_binlog_stm.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/mysqlbinlog.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
sql/log.cc:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc:
. stmt_has_updated_non_trans_table
. trans_has_updated_non_trans_table
. ending_trans
Updated the binlog_rollback function and the use of the
OPTION_KEEP_LOG which indincates when a temporary table was
either created or dropped and as such the command must be
logged if not in MIXED mode and even while rolling back the
transaction.
sql/log.h:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc.
sql/log_event.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/log_event_old.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/share/errmsg-utf8.txt:
Updated the unsafe message.
sql/sql_class.cc:
Classifies the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
sql/sql_class.h:
It allows to switch from STATEMENT to MIXED/ROW when there are temporary
tables but the contrary is not possible.
sql/sql_table.cc:
Fixed the case that a DROP/DROP TEMPORARY that affects a temporary table in MIXED
mode is written as a DROP TEMPORARY TABLE IF EXISTS because the table may not exist in the slave and due to the IF EXISTS token an error will never happen
while processing the statement in the slave.
Removed a function that was not being used.
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Updated the test case to avoid checking inconsistencies between the master and slave
when session.binlog_direct_non_transactional_updates is ON and the format is statement.
In this scenario, they will diverge because a counter (within a triger) is incremented
and associated to the issued statement. However, an n-statement is logged ahead of
the transaction and thus is not executed by the same order in the slave and thus gets
a different value from the counter.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/log.cc:
Checked if either a trx-cache or a non-trx-cache should be used.
If bin_log_direct_non_trans_update is active or the format is either
MIXED or ROW, the cache to be used depends on the flag is_transactional.
When the format is STMT, the non-trx-cache should be used if the statement
is non-transactional and the trx-cache is empty, i.e. if any transactional
statement has not committed yet. Otherwise, the trx-cache should be used.
sql/share/errmsg-utf8.txt:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_class.cc:
Started printing ER_BINLOG_UNSAFE_MIXED_STATEMENT, when there
is a mixed-statement.
Organized the names of the variables and added comments.
sql/sql_lex.cc:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_lex.h:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
a pattern of usage DEBUG_SYNC for replication testing is provided.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
results are changed.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
limiting the test to run only with MIXED binlog-format as the test last
some 10 secs sensitively contributing to the total of tests run.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based.
sql/debug_sync.cc:
adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code.
sql/debug_sync.h:
externalizing debug_sync_set_action().
sql/item_func.cc:
purging sources from DBUG_SYNC_POINT.
sql/mysql_priv.h:
purging sources from DBUG_SYNC_POINT.
sql/slave.cc:
rewriting failure simulations to base on DEBUG_SYNC rather than GET_LOCK()-based DBUG_SYNC_POINT.
sql/sql_repl.cc:
removing an orphan failure simulation line because no counterpart in tests existing.
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
When using MyIsam tables and processing concurrent DML
statements, the server may be sending back an OK to the client
before actually finishing the transaction commit procedure. This
has been reported before in BUG@37521 and BUG@29334.
This particular test case gets affected, because it performs the
following sequence:
connect (conn2, ...)
connection conn2;
LOAD DATA CONCURRENT ...
disconnect (conn2, ...)
connection master;
sync_slave_with_master
diff_tables
At this point diff_tables may report difference in the table
content (the master seems to be missing the conn2 rows).
To workaround this MyISAM concurrent DML statements issue and
make this test case deterministic, we wait on conn2 until the
rows inserted show up in the table. After this the test case
proceeds as normally would before this patch.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist'.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Correct the test result, all the above binlog event
should be row-based after the bug49132 is fixed IN RBR.
mysql-test/suite/ndb/r/ndb_tmp_table_and_DDL.result:
Test result for bug#49132 base on ndb engine.
mysql-test/suite/ndb/t/ndb_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on ndb engine.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Test result for bug#49132 base on myisam engine.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on myisam engine.
sql/event_db_repository.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/events.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sp.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_acl.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_udf.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
InnoDB test.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
MyISAM test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
NDB test.
sql/field.h:
Changed reset so that it also clears the bits
among the null_bits for the Field_bit class.
sql/rpl_record.cc:
Resetting field after setting it to null when unpacking
row.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
mysql-test/extra/rpl_tests/rpl_row_func003.test:
updated test case to ignore new warnings
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for RAND().
Also clarified some old comments.
mysql-test/suite/rpl/r/rpl_misc_functions.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
updated test case to ignore new warnings
mysql-test/suite/rpl/r/rpl_optimize.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_func003.result:
updated result file
mysql-test/suite/rpl/t/rpl_misc_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_optimize.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_trigger.test:
updated test case to ignore new warnings
mysql-test/suite/rpl_ndb/r/rpl_ndb_func003.result:
updated result file
sql/item_create.cc:
Mark RAND() unsafe.
