Description: When querying a subset of columns from the information_schema.TABLES
Analysis: When information about tables is collected for statements like
"SELECT ENGINE FROM I_S.TABLES" we do not perform full-blown table opens
in SE, instead we only use information from table shares from the Table
Definition Cache or .FRMs. Still in order to simplify I_S implementation
mock TABLE objects are created from TABLE_SHARE during this process.
This is done by calling open_table_from_share() function with special
arguments. Since this function always increments "Opened_tables" counter,
calls to it can be mistakingly interpreted as full-blown table opens in SE.
Note that claim that "'SELECT ENGINE FROM I_S.TABLES' statement doesn't
use Table Cache" is nevertheless factually correct. But it misses the
point, since such statements a) don't use full-blown TABLE objects and
therefore don't do table opens b) still use Table Definition Cache.
Fix: We are now incrementing the counter when db_stat(i.e open flags for ha_open(
we have considered an optimization which would use TABLE objects from
Table Cache when available instead of constructing mock TABLE objects,
but found it too intrusive for stable releases.
Analysis:
--------
Certain queries using intrinsic temporary tables may fail due to
name clashes in the file name for the temporary table when the
'temp-pool' enabled.
'temp-pool' tries to reduce the number of different filenames used for
temp tables by allocating them from small pool in order to avoid
problems in the Linux kernel by using a three part filename:
<tmp_file_prefix>_<pid>_<temp_pool_slot_num>.
The bit corresponding to the temp_pool_slot_num is set in the bit
map maintained for the temp-pool when it used for the file name.
It is cleared after the temp table is deleted for re-use.
The 'create_tmp_table()' function call under error condition
tries to clear the same bit twice by calling 'free_tmp_table()'
and 'bitmap_lock_clear_bit()'. 'free_tmp_table()' does a delete
of the table/file and clears the bit by calling the same function
'bitmap_lock_clear_bit()'.
The issue reported can be triggered under the timing window mentioned
below for an error condition while creating the temp table:
a) THD1: Due to an error clears the temp pool slot number used by it
by calling 'free_tmp_table'.
b) THD2: In the process of creating the temp table by using an unused
slot number in the bit map.
c) THD1: Clears the slot number used THD2 by calling
'bitmap_lock_clear_bit()' after completing the call 'free_tmp_table'.
d) THD3: Uses the slot number used the THD2 since it is freed by THD1.
When it tries to create the temp file using that slot number,
an error is reported since it is currently in use by THD2.
[The error: Error 'Can't create/write to file
'/tmp/#sql_277e_0.MYD' (Errcode: 17)']
Another issue which may occur in 5.6 and trunk is that:
When the open temporary table fails after its creation(due to ulimit
or OOM error), the file is not deleted. Thus further attempts to use
the same slot number in the 'temp-pool' results in failure.
Fix:
---
a) Under the error condition calling the 'bitmap_lock_clear_bit()'
function to clear the bit is unnecessary since 'free_tmp_table()'
deletes the table/file and clears the bit. Hence removed the
redundant call 'bitmap_lock_clear_bit()' in 'create_tmp_table()'
This prevents the timing window under which the issue reported
can be seen.
b) If open of the temporary table fails, then the file is deleted
thus allowing the temp-pool slot number to be utilized for the
subsequent temporary table creation.
c) Also if the attempt to create temp table fails since it already
exists, the temp-pool slot for it is marked as used, to avoid
the problem from re-appearing.
Description:
Using correct length when moving to next field in cmp_ref. The store
length already includes the length bytes of blobs, which is already considered
earlier for blob types.
Approved by Mattias, Jimmy [rb-7088]
The debug configuration parameter innodb_optimistic_insert_debug
which was introduced for testing corner cases in B-tree handling
had a bug in it. The value 1 would trigger an infinite sequence
of page splits.
Fix: When the value 1 is specified, disable this debug feature.
Approved by Yasufumi Kinoshita
dict_set_corrupted(): Use the canonical way of searching for
less-than-equal (PAGE_CUR_LE) and then checking low_match.
The code that was introduced in MySQL 5.5.17 in
Bug#11830883 SUPPORT "CORRUPTED" BIT FOR INNODB TABLES AND INDEXES
could position the cursor on the page supremum, and then attempt
to overwrite non-existing 7th field of the 1-field supremum record.
Approved by Jimmy Yang
Description:- Replace, the string replacement utility fails
on the windows platform.
Analysis:- The utility takes files and multiple string
pairs as input. In the windows platform, the utility maps
the standard input incorrectly (Considers 0 as the fd for
standard input instead of 2048 on windows). Hence when the
input file is supplied to the utility due to the incorrect
mapping, a bad file descriptor error is generated causing
the utility to exit with an error.
Fix:- "my_fileno()" is used for getting the correct file
despscriptor for standard input.
some of the tables are created in InnoDB and some tables are created in MyISAM.
We need to create all tables on InnoDB. Fix is to add engine=innodb to the
CREATE TABLE statements.
approved in IM by Marko and Vasil.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
FROM A FUNCTION
Scenario:
In a stored procedure, CREATE TABLE statement is not allowed. But an
exception is provided for CREATE TEMPORARY TABLE. We can create a temporary
table in a stored procedure.
Let there be two stored functions f1 and f2 and two stored procedures p1 and
p2. Their properties are as follows:
. stored function f1() calls stored procedure p1().
. stored function f2() calls stored procedure p2().
. stored procedure p1() creates temporary table t1.
. stored procedure p2() does DML on t1.
Consider the following situation:
1. Autocommit mode is on.
2. select f1()
3. select f2()
Step 2: In this step, t1 would be created via p1(). A table level transaction
lock would have been taken. The ::external_lock() would not have been called
on this table. At the end of step 2, because of autocommit mode on, this table
level lock will be released.
Step 3: When we execute DML on table t1 via p2() we have two problems:
Problem 1:
The function ha_innobase::external_lock() would have been called but since
it is a select query no table level locks would have been taken. Hence the
following assert will fail:
ut_ad(lock_table_has(thr_get_trx(thr), index->table, LOCK_IX));
Solution:
The solution would be to identify this situation and take a table level lock
and use the proper lock type prebuilt->select_lock_type = LOCK_X for DML
operations.
Problem 2:
Another problem is that in step 3, ha_innobase::open() is never called on
the table t1.
Solution:
The solution would be to identify this situation and call re-init the handler
of table t1.
rb#6429 approved by Krunal.
Problem:
Creation of a table fails when innodb_strict_mode is enabled, but the same
table is created without any warning when innodb_strict_mode is enabled.
Solution:
If creation of a table fails with an error when innodb_strict_mode is
enabled, it must issue a warning when innodb_strict_mode is disabled.
rb#6723 approved by Krunal.
AND IS_USED_LOCK().
Analysis:
-----------
In functions Item_func_is_free_lock::val_int() and
Item_func_is_used_lock::val_int(), for the specified user lock
name, pointer to its "User_level_lock" object is obtained from hash
"hash_user_locks". Mutex "LOCK_user_locks" is acquired for this
and released immediately. And we are accessing members of
User_level_lock after releasing the mutex. If same user lock is
deleted(released) from concurrent thread then accessing members
results in invalid(freed) memory access issue.
Deleting of user lock is also protected from the mutex
"LOCK_user_locks". Since this mutex is released in "val_int"
functions mentioned above, delete operation proceeds while concurrent
thread tries to access its members.
With the test case, valgrind reports invalid read issues in val_int
functions.
Fix:
-----------
To fix this issue, in "val_int" function of classes
"Item_func_is_free_lock" and "Item_func_is_used_lock", now releasing
mutex "LOCK_user_locks" after accessing User_level_lock members.
Problem:
We maintain two rb trees in each dict_table_t. The foreign_rbt must be in
sync with foreign_list. The referenced_rbt must be in sync with
referenced_list. There is one function which checks this consistency and it
failed, resulting in an assert failure.
The root cause of the problem was identified that the search order was
lost in the referenced_rbt. This is because while renaming the table,
we didn't not refresh this referenced_rbt.
Solution:
When a foreign key is renamed, we must delete and re-insert into both
foreign_rbt and referenced_rbt.
rb#6412 approved by Jimmy.
COLLATIONS ARE USED.
ISSUE :
-------
Code points of HALF WIDTH KATAKANA in SJIS/CP932 range from
A1 to DF. In function my_wildcmp_mb_bin_impl while comparing
such single byte code points, there is a code which compares
signed character with unsigned character. Because of this,
comparisons of two same code points representing a HALF
WIDTH KATAKANA character always fails.
Solution:
---------
A code point of HALF WIDTH KATAKANA at-least need 8 bits.
Promoting the variable from uchar to int will fix the issue.
GOES AWAY, MYSQL QUITS WORKING.
Analysis:
-----------------
Issue in this bug and in bug 11907705 is, the socket file or
fifo file is set for general log at command line while starting
the server. But currently, only regular file can be set for the
general log. Instead of reporting any error, the provided files
are opened for writing and continued. Because of this issues
mentioned in the bug reports are seen.
As mentioned, only when any non-regular file is set for general
log at command line while starting the server, these issues are
seen. If general log file is set to non-regular file from CLI
using system variable general_log_file then error is reported.
These issues can also be faced with slow query log file, if it is
set to non-regular file.
Fix:
-----------------
Currently while starting the server if we fail to open log file
then we report an error, disable logging to file and continue.
To fix issue reported code is modified to check whether file
is regular file or not before opening it. If file is not a
regular file then error is logged to error log and logging to
file is disabled.
The test case makes use of the fine DEBUG_SYNC facility. Furthermore,
since it needs synchronization on internal threads (dump and SQL
threads) the server code has DEBUG_SYNC commands internally deployed
and activated through the DBUG_EXECUTE_IF macro. The internal
DBUG_SYNC commands are then controlled from the test case through the
DEBUG variable.
There were three problems around the DEBUG + DEBUG_SYNC facility
usage:
1. When signaling the SQL thread to continue, the test would reset
immediately the DEBUG_SYNC variable. This could mean that the SQL
thread might loose the signal and continue to wait forever;
2. A similar scenario was happening with the dump thread on the
master. This thread was instructed to wait, and later it would be
signaled to continue, but immediately after the DEBUG_SYNC would be
reset. This could lead to the dump thread missing the signal and
wait forever;
3. The test was not cleaning itself up with respect to the
instrumentation of the dump thread. This would leave the
conditional execution of an internal DEBUG_SYNC command active
(through the usage of DBUG_EXECUTE_IF).
We fix#1 and #2 by waiting for the threads to receive the signal and
only then issue the reset. We fix#3 by reseting the DEBUG variable,
thus deactivating the dump thread internal DEBUG_SYNC command.
Bug#16415173 CRLF INSTEAD OF LF IN SQL-BENCH SCRIPTS
Correct perms and converts from Windows style to UNIX style line endings on some files.
Fix perms on installed ini files.
(MySQL 5.5 version)
CORRUPTS FRM
Analysis:
---------
ALTER TABLE on a partitioned table resulted in the wrong
engine being written into the table's FRM file and displayed
in SHOW CREATE TABLE.
The prep_alter_part_table() modifies the partition_info object
for TABLE instance representing the old version of table.
If the ALTER TABLE ENGINE statement fails, the partition_info
object for the TABLE contains the altered storage engine name.
The SHOW CREATE TABLE uses the TABLE object to display the table
information, hence displays incorrect storage engine for the table.
Also a subsequent successful ALTER TABLE operation will write the
incorrect engine information into the FRM file.
Fix:
---
A copy of the partition_info object is created before modification so
that any changes would not cause the the original partition_info object
to be modified if the ALTER TABLE fails.(Backported part of the code
provided as fix for bug#14156617 in mysql-5.6.6).
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
SLOW/CRASHES SEMAPHORE
Problem:
There are 2 lakh tables - fk_000001, fk_000002 ... fk_200000. All of them
are related to the same parent_table through a foreign key constraint.
When the parent_table is loaded into the dictionary cache, all the child table
will also be loaded. This is taking lot of time. Since this operation happens
when the dictionary latch is taken, the scenario leads to "long semaphore wait"
situation and the server gets killed.
Analysis:
A simple performance analysis showed that the slowness is because of the
dict_foreign_find() function. It does a linear search on two linked list
table->foreign_list and table->referenced_list, looking for a particular
foreign key object based on foreign->id as the key. This is called two
times for each foreign key object.
Solution:
Introduce a rb tree in table->foreign_rbt and table->referenced_rbt, which
are some sort of index on table->foreign_list and table->referenced_list
respectively, using foreign->id as the key. These rbt structures will be
solely used by dict_foreign_find().
rb#5599 approved by Vasil
"HAVING SUM(DISTINCT)": WRONG RESULTS.
ISSUE:
------
If a query uses loose index scan and it has both
AGG(DISTINCT) and MIN()/MAX()functions. Then, result values
of MIN/MAX() is set improperly.
When query has AGG(DISTINCT) then end_select is set to
end_send_group. "end_send_group" keeps doing aggregation
until it sees a record from next group. And, then it will
send out the result row of that group.
Since query also has MIN()/MAX() and loose index scan is
used, values of MIN/MAX() are set as part of loose index
scan itself. Setting MIN()/MAX() values as part of loose
index scan overwrites values computed in end_send_group.
This caused invalid result.
For such queries to work loose index scan should stop
performing MIN/MAX() aggregation. And, let end_send_group to
do the same. But according to current design loose index
scan can produce only one row per group key. If we have both
MIN() and MAX() then it has to give two records out. This is
not possible as interface has to use common buffer
record[0]! for both records at a time.
SOLUTIONS:
----------
For such queries to work we need a new interface for loose
index scan. Hence, do not choose loose_index_scan for such
cases. So a new rule SA7 is introduced to take care of the
same.
SA7: "If Q has both AGG_FUNC(DISTINCT ...) and
MIN/MAX() functions then loose index scan access
method is not used."
SHOW PROCESSLIST, SHOW BINLOGS
Fixing post push test failure (MTR does not like giving
127.0.0.1 for localhost incase of --embedded run, it thinks
it is an external ip address)
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
ISSUE:
------
For UNION of selects, rows examined by the query will be sum
of rows examined by individual select operations and rows
examined for union operation. The value of session level
global counter that is used to count the rows examined by a
select statement should be accumulated and reset before it
is used for next select statement. But we have missed to
reset the same. Because of this examined row count of a
select query is accounted more than once.
SOLUTION:
---------
In union reset the session level global counter used to
accumulate count of examined rows after its value is saved.
Problem:
If there is a predicate on a column referenced by MIN/MAX and
that predicate is not present in all the disjunctions on
keyparts earlier in the compound index, Loose Index Scan will
not return correct result.
Analysis:
When loose index scan is chosen, range optimizer currently
groups all the predicates that contain group parts separately
and minmax parts separately. It therefore applies all the
conditions on the group parts first to the fetched row.
Then in the call to next_max, it processes the conditions
which have min/max keypart.
For ex in the following query:
Select f1, max(f2) from t1 where (f1 = 10 and f2 = 13) or
(f1 = 3) group by f1;
Condition (f2 = 13) would be applied even for rows that
satisfy (f1 = 3) thereby giving wrong results.
Solution:
Do not choose loose_index_scan for such cases. So a new rule
WA2 is introduced to take care of the same.
WA2: "If there are predicates on C, these predicates must
be in conjuction to all predicates on all earlier keyparts
in I."
Todo the same, fix reuses the function get_constant_key_infix().
Since this funciton will fail for all multi-range conditions, it
is re-written to recognize that if the sub-conditions are
equivalent across the disjuncts: it will now succeed.
And to achieve this a new helper function is introduced called
all_same().
The fix also moves the test of NGA3 up to the former only
caller, get_constant_key_infix().
Typo leading to not including the last list values (partition).
Also improved pruning to skip last partition if not used.
rb#4762 approved by Aditya and Marko.
Problem: Uninstallation of semi sync plugin causes replication to
break.
Analysis: A semisync enabled replication is mutual agreement between
Master and Slave when the connection (I/O thread) is established.
Once I/O thread is started and if semisync is enabled on both
master and slave, master appends special magic header to events
using semisync plugin functions and sends it to slave. And slave
expects that each event will have that special magic header format
and reads those bytes using semisync plugin functions.
When semi sync replication is in use if users execute
uninstallation of the plugin on master, slave gets confused while
interpreting that event's content because it expects special
magic header at the beginning of the event. Slave SQL thread will
be stopped with "Missing magic number in the header" error.
Similar problem will happen if uninstallation of the plugin happens
on slave when semi sync replication is in in use. Master sends
the events with magic header and slave does not know about the
added magic header and thinks that it received a corrupted event.
Hence slave SQL thread stops with "Found corrupted event" error.
Fix: Uninstallation of semisync plugin will be blocked when semisync
replication is in use and will throw 'ER_UNKNOWN_ERROR' error.
To detect that semisync replication is in use, this patch uses
semisync status variable values.
> On Master, it checks for 'Rpl_semi_sync_master_status' to be OFF
before allowing the uninstallation of rpl_semi_sync_master plugin.
>> Rpl_semi_sync_master_status is OFF when
>>> there is no dump thread running
>>> there are no semisync slaves
> On Slave, it checks for 'Rpl_semi_sync_slave_status' to be OFF
before allowing the uninstallation of rpl_semi_sync_slave plugin.
>> Rpl_semi_sync_slave_status is OFF when
>>> there is no I/O thread running
>>> replication is asynchronous replication.
ARE PERMANENTLY SKIPPED IN 5.5/5.6).
The problem was that some result files were not updated,
so the tests were skipped.
The fix is to record updated result files.
BREAKS RBR
Analysis:
--------
A table created using a query of the format:
CREATE TABLE t1 AS SELECT REPEAT('A',1000) DIV 1 AS a;
breaks the Row Based Replication.
The query above creates a table having a field of datatype
'bigint' with a display width of 3000 which is beyond the
maximum acceptable value of 255.
In the RBR mode, CREATE TABLE SELECT statement is
replicated as a combination of CREATE TABLE statement
equivalent to one the returned by SHOW CREATE TABLE and
row events for rows inserted. When this CREATE TABLE event
is executed on the slave, an error is reported:
Display width out of range for column 'a' (max = 255)
The following is the output of 'SHOW CREATE TABLE t1':
CREATE TABLE t1(`a` bigint(3000) DEFAULT NULL)
ENGINE=InnoDB DEFAULT CHARSET=latin1;
The problem is due to the combination of two facts:
1) The above CREATE TABLE SELECT statement uses the display
width of the result of DIV operation as the display width
of the column created without validating the width for out
of bound condition.
2) The DIV operation incorrectly returns the length of its first
argument as the display width of its result; thus allowing
creation of a table with an incorrect display width of 3000
for the field.
Fix:
----
This fix changes the DIV operation implementation to correctly
evaluate the display width of its result. We check if DIV's
results estimated width crosses maximum width for integer
value (21) and if yes set it to this maximum value.
This patch also fixes fixes maximum display width evaluation
for DIV function when its first argument is in UCS2.
Bug#18396916 MAIN.OUTFILE_LOADDATA TEST FAILS ON ARM, AARCH64, PPC/PPC64
The recorded results for the failing tests were wrong.
They were introduced by the patch for
Bug#30946 mysqldump silently ignores --default-character-set when used with --tab
Correct results were returned for platforms where 'char' is implemented as unsigned.
This was reported as
Bug#46895 Test "outfile_loaddata" fails (reproducible)
Bug#11755168 46895: TEST "OUTFILE_LOADDATA" FAILS (REPRODUCIBLE)
The patch for that bug fixed only parts of the problem,
leaving the incorrect results in the .result file.
Solution: use 'uchar' for field_terminator and line_terminator on all platforms.
Also: remove some un-necessary casts, leaving the ones we actually need.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
LOCAL AND IMPORT ERRORS
Description:
-----------
This bug happens due to the fact that current algorithm is designed
that in the case of LOCAL load of data, in case of the error, the
remaining part of the file is read in order to return the proper
error message to the client side.
But, the problem with current implementation is that data stream
for the client side is cleared only in the case where line delimiters
exist, which is not a case with, for example fixed width
fields.
Fix:
----
Ported patch provided by Sinisa Milivojevic n bug report for this
issue to 5.5+ versions.
As part of this patch code is changed to clear the data stream
by calling new member function "READ_INFO::skip_data_till_eof".
