/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
mysql-test/suite/rpl/t/rpl_conditional_comments.test:
Test the patch for this bug.
sql/mysql_priv.h:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_lex.cc:
To replace '!' with ' ' in the magic comments which are not applied on
master.
sql/sql_lex.h:
Remove the const limitation on parameter buff, as it can be modified in the function since
this patch.
Add member function yyUnput for Lex_input_stream. It set a character back the query buff.
sql/sql_parse.cc:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_partition.cc:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/sql_partition.h:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/table.h:
Remove the const limitation on variable partition_info, as it can be modified since
this patch.
There were two problems that caused wrong results reported with this bug.
1. In some cases stored(persistent) virtual columns were not marked
in the write_set and in the vcol_set bitmaps.
2. If the list of fields in an insert command was empty then the values of
the stored virtual columns were set to default.
To fix the first problem the function st_table::mark_virtual_columns_for_write
was modified. Now the function has a parameter that says whether the virtual
columns are to be marked for insert or for update.
To fix the second problem a special handling of empty insert lists is
added in the function fill_record().
libmysqld/Makefile.am:
The new file added.
mysql-test/r/index_merge_myisam.result:
subquery_cache optimization option added.
mysql-test/r/myisam_mrr.result:
subquery_cache optimization option added.
mysql-test/r/subquery_cache.result:
The subquery cache tests added.
mysql-test/r/subselect3.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect3_jcl6.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect_no_mat.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_opts.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_semijoin.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj_jcl6.result:
subquery_cache optimization option added.
mysql-test/t/subquery_cache.test:
The subquery cache tests added.
mysql-test/t/subselect3.test:
Subquery cache switched off to avoid changing read statistics.
sql/CMakeLists.txt:
The new file added.
sql/Makefile.am:
The new files added.
sql/item.cc:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item.h:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item_cmpfunc.cc:
Subquery cache added.
sql/item_cmpfunc.h:
Subquery cache added.
sql/item_subselect.cc:
Subquery cache added.
sql/item_subselect.h:
Subquery cache added.
sql/item_sum.cc:
Registration of subquery parameters added.
sql/mysql_priv.h:
subquery_cache optimization option added.
sql/mysqld.cc:
subquery_cache optimization option added.
sql/opt_range.cc:
Fix due to subquery cache.
sql/opt_subselect.cc:
Parameters of the function cahnged.
sql/procedure.h:
.h file guard added.
sql/sql_base.cc:
Registration of subquery parameters added.
sql/sql_class.cc:
Option to allow add indeces to temporary table.
sql/sql_class.h:
Item iterators added.
Option to allow add indeces to temporary table.
sql/sql_expression_cache.cc:
Expression cache for caching subqueries added.
sql/sql_expression_cache.h:
Expression cache for caching subqueries added.
sql/sql_lex.cc:
Registration of subquery parameters added.
sql/sql_lex.h:
Registration of subqueries and subquery parameters added.
sql/sql_select.cc:
Subquery cache added.
sql/sql_select.h:
Subquery cache added.
sql/sql_union.cc:
A new parameter to the function added.
sql/sql_update.cc:
A new parameter to the function added.
sql/table.cc:
Procedures to manage temporarty tables index added.
sql/table.h:
Procedures to manage temporarty tables index added.
storage/maria/ha_maria.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
storage/maria/ha_maria.h:
.h file guard added.
storage/myisam/ha_myisam.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
strict aliasing violations.
One somewhat major source of strict-aliasing violations and
related warnings is the SQL_LIST structure. For example,
consider its member function `link_in_list` which takes
a pointer to pointer of type T (any type) as a pointer to
pointer to unsigned char. Dereferencing this pointer, which
is done to reset the next field, violates strict-aliasing
rules and might cause problems for surrounding code that
uses the next field of the object being added to the list.
The solution is to use templates to parametrize the SQL_LIST
structure in order to deference the pointers with compatible
types. As a side bonus, it becomes possible to remove quite
a few casts related to acessing data members of SQL_LIST.
sql/handler.h:
Use the appropriate template type argument.
sql/item.cc:
Remove now-unnecessary cast.
sql/item_subselect.cc:
Remove now-unnecessary casts.
sql/item_sum.cc:
Use the appropriate template type argument.
Remove now-unnecessary cast.
sql/mysql_priv.h:
Move SQL_LIST structure to sql_list.h
Use the appropriate template type argument.
sql/sp.cc:
Remove now-unnecessary casts.
sql/sql_delete.cc:
Use the appropriate template type argument.
Remove now-unnecessary casts.
sql/sql_derived.cc:
Remove now-unnecessary casts.
sql/sql_lex.cc:
Remove now-unnecessary casts.
sql/sql_lex.h:
SQL_LIST now takes a template type argument which must
match the type of the elements of the list. Use forward
declaration when the type is not available, it is used
in pointers anyway.
sql/sql_list.h:
Rename SQL_LIST to SQL_I_List. The template parameter is
the type of object that is stored in the list.
sql/sql_olap.cc:
Remove now-unnecessary casts.
sql/sql_parse.cc:
Remove now-unnecessary casts.
sql/sql_prepare.cc:
Remove now-unnecessary casts.
sql/sql_select.cc:
Remove now-unnecessary casts.
sql/sql_show.cc:
Remove now-unnecessary casts.
sql/sql_table.cc:
Remove now-unnecessary casts.
sql/sql_trigger.cc:
Remove now-unnecessary casts.
sql/sql_union.cc:
Remove now-unnecessary casts.
sql/sql_update.cc:
Remove now-unnecessary casts.
sql/sql_view.cc:
Remove now-unnecessary casts.
sql/sql_yacc.yy:
Remove now-unnecessary casts.
storage/myisammrg/ha_myisammrg.cc:
Remove now-unnecessary casts.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
sql/ha_ndbcluster.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2().
sql/lock.cc:
lock_table_names() no longer initializes table list elements'
MDL_request objects. Now proper initialization of these
requests is a responsibility of the caller.
sql/lock.h:
Removed MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag which became
unnecessary. Thanks to the fact that we don't reset type of
requests for metadata locks between re-executions we now can
figure out that upgradable locks are requested by simply
looking at their type which were set in the parser. As result
this flag became redundant.
sql/mdl.h:
Added version of new operator which simplifies allocation of
MDL_request objects on a MEM_ROOT.
sql/sp_head.cc:
Added comment explaining why it is OK to infer type of
metadata lock to request from type of table-level lock
for prelocking.
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sp_head.h:
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sql_base.cc:
- open_table_get_mdl_lock():
Preserve type of MDL_request for table list element which
was set in the parser by creating MDL_request objects on
memory root if MYSQL_OPEN_FORCE_SHARED_MDL or
MYSQL_OPEN_FORCE_SHARED_HIGH_PRIO_MDL flag were specified.
Thanks to this and to the fact that we no longer reset
type of requests for metadata locks between re-executions
we no longer need to acquire exclusive metadata lock on
table to be created in a special way. This lock is acquired
by code handling acquiring of upgradable locks.
Also changed signature/calling convention for this function
to simplify its usage.
- Accordingly special lock strategy for table list elements
which was used for such locks became unnecessary and was
removed. Other strategies were renamed.
- Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
- Changed open_tables()/open_tables_check_upgradable_mdl()/
open_tables_acquire_upgradable_mdl() not to rely on
MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to understand when
upgradable metadata locks should be acquired and not to
infer type of MDL lock from type of table-level lock.
Instead we assume that type of MDL to be acquired was set
in the parser (we can do this as type of MDL_request is
no longer reset between re-executions).
sql/sql_class.h:
Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
sql/sql_db.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2()
or mysql_rename_tables().
sql/sql_lex.cc:
st_select_lex/st_select_lex_node::add_table_to_list() method
now has argument which allows specify type of metadata lock
to be requested for table list element being added.
sql/sql_lex.h:
- st_select_lex/st_select_lex_node::add_table_to_list()
method now has argument which specifies type of metadata
lock to be requested for table list element being added.
This allows to explicitly set type of MDL lock to be
acquired for a DDL statement in parser. It is also more
future-proof than inferring type of MDL request from type
of table-level lock.
- Added Yacc_state::m_mdl_type member which specifies which
type of metadata lock should be requested for tables to be
added to table list by a grammar rule in cases when the same
rule is used in several statements requiring different kinds
of metadata locks.
sql/sql_parse.cc:
- st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added. This allows to explicitly
set type of MDL lock to be acquired for a DDL statement in
parser. It is also more future-proof than inferring type of
MDL request from type of table-level lock.
- EXCLUSIVE_DOWNGRADABLE_MDL lock strategy has a new name -
OTLS_DOWNGRADE_IF_EXISTS.
- Adjusted LOCK TABLES implementation to the fact that we no
longer infer type of metadata lock to be acquired from table
level lock and that type of MDL request is set at parsing.
And thus MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag became
unnecessary.
sql/sql_prepare.cc:
TABLE_LIST's lock strategy SHARED_MDL was renamed to OTLS_NONE
as now it means that metadata lock should not be changed during
call to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
sql/sql_show.cc:
st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added.
sql/sql_table.cc:
- Adjusted mysql_admin_table()'s code to the fact that
open_tables() no longer determines what kind of metadata
lock should be obtained basing on type of table-level
lock and flags. Instead type of metadata lock for table
to be open should be set before calling open_tables().
- Changed mysql_alter_table() code to the facts:
a) that now it is responsibility of caller to properly
initalize MDL_request in table list elements before calling
lock_table_names()
b) and that MYSQL_OPEN_TAKE_UPGRADABLE_MDL is no longer
necessary since type of metadata lock to be obtained
at open_tables() time is set during parsing.
- Changed code of mysql_recreate_table() to properly set
type of metadata and table-level lock to be obtained
by mysql_alter_table() which it calls.
sql/sql_trigger.cc:
Instead of relying on MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to
force open_tables() to take an upgradable lock we now specify
exact type of lock to be taken when constructing table list
element for table to be open for CREATE/DROP TRIGGER.
sql/sql_view.cc:
We no longer use TABLE_LIST::EXCLUSIVE_MDL strategy to force
open_tables() to take an exclusive metadata lock on view to
be created. Instead we rely on parser setting proper type of
metadata lock to request and open_tables() acquiring it.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
sql/sql_yacc.yy:
Instead of inferring type of MDL_request for table to be
open from type of table-level lock and flags passed to
open_tables() we now explicitly specify them at parsing.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
In future this should allow to decouple type of metadata
lock from type of table-level lock.
The only exception to this approach is statements implemented
through mysql_admin_table() which re-uses same table list
element several times with different types of table-level
and metadata locks.
We now also properly initialize MDL_request objects for table
list elements which are later passed to lock_table_names()
function.
sql/table.cc:
Do not reset type of MDL_request between statement
re-executions. This became unnecessesary as we no longer
change type of MDL_request residing in table list element.
In its turn this change allows to set type of MDL_request
only once - at parsing time.
sql/table.h:
Got rid of TABLE_LIST::EXCLUSIVE_MDL lock strategy.
Now we can specify that we need to acquire exclusive lock
on table to be processed by open_tables() through setting
an appropriate type of MDL_request at parsing time (this
became possible thanks to the fact that we no longer reset
types of MDL_request's belonging to table list elements
between statement re-execution).
Strategy SHARED_MDL was renamed to OTLS_NONE as now it
means that metadata lock should not be changed during call
to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
Strategy EXCLUSIVE_DOWNGRADABLE_MDL was renamed to
OTLS_DOWNGRADE_IF_EXISTS.
Item_hex_string::Item_hex_string
The status of memory allocation in the Lex_input_stream (called
from the Parser_state constructor) was not checked which led to
a parser crash in case of the out-of-memory error.
The solution is to introduce new init() member function in
Parser_state and Lex_input_stream so that status of memory
allocation can be returned to the caller.
mysql-test/r/error_simulation.result:
Added a test case for bug #42064.
mysql-test/t/error_simulation.test:
Added a test case for bug #42064.
mysys/my_alloc.c:
Added error injection code for the regression test.
mysys/my_malloc.c:
Added error injection code for the regression test.
mysys/safemalloc.c:
Added error injection code for the regression test.
sql/event_data_objects.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/mysqld.cc:
Added error injection code for the regression test.
sql/sp.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_lex.cc:
Moved memory allocation from constructor to the separate init()
member function.
Added error injection code for the regression test.
sql/sql_lex.h:
Moved memory allocation from constructor to the separate init()
member function.
sql/sql_parse.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_partition.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_prepare.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_trigger.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_view.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures..
sql/thr_malloc.cc:
Added error injection code for the regression test.
multiquery packet).
Background:
- a query can contain multiple SQL statements;
- the server frees resources allocated to process a query when the
whole query is handled. In other words, resources allocated to process
one SQL statement from a multi-statement query are freed when all SQL
statements are handled.
The problem was that the parser allocated a buffer of size of the whole
query for each SQL statement in a multi-statement query. Thus, if a query
had many SQL-statements (so, the query was long), but each SQL statement
was short, ther parser tried to allocate huge amount of memory (number of
small SQL statements * length of the whole query).
The memory was allocated for a so-called "cpp buffer", which is intended to
store pre-processed SQL statement -- SQL text without version specific
comments.
The fix is to allocate memory for the "cpp buffer" once for all SQL
statements (once for a query).
- INSERT with RAND() doesn't require row based logging again
- Some bugs fixed in opt_range() where we table->key_read was wrongly used
.bzrignore:
Ignore new xtstat binary
mysql-test/r/index_merge_myisam.result:
Update results (old result was wrong)
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Added drop table first
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Added test for when RAND() requires row based logging
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Added drop table first
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Added test for when RAND() requires row based logging
scripts/make_binary_distribution.sh:
Removed type from last commit
sql/item_create.cc:
Don't require row based logging when using RAND() with INSERT
sql/opt_range.cc:
Revert wrong patch from Oracle:
- As QUICK_RANGE_SELECT uses it's own 'file' handler to the tables, one can't use 'table->key_read' as a flag to detect if index only read (keyread) is used or not
- Don't set keyread if keyread is already enabled
- Don't disable key read, if we didn't enable it ourselves
- Simplify code (and ensure that we do proper cleanup of index only read)
sql/opt_range.h:
Added flags to detect if the range optimizer enabled index only read (key read) or not
sql/opt_sum.cc:
Use our more optimized macros
sql/sql_lex.h:
Added 'readable' function to check if we are in a sub query function or not (not normal query or sub query in FROM clause)
sql/sql_select.cc:
Use our more optimized keyread macros
Added ASSERTS early
Simplify code on eliminate_item_equal()
Fixed that substitute_for_best_equal_field() doesn't core dump in case of out of memory conditions.
Removed not needed test for 'field->maybe_null()'
Replaced master_unit()->item with is_subquery_function() (More readable)
sql/sql_update.cc:
Use our more optimized keyread macros
sql/table.cc:
Use our more optimized keyread macros
sql/table.h:
Use separate functions to enable/disable Index only reads
- Safer, more readable, better logging and faster.
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
mysql-test/include/check_concurrent_insert.inc:
Added auxiliary script which allows to check if statement
reading table allows concurrent inserts in it.
mysql-test/include/check_no_concurrent_insert.inc:
Added auxiliary script which allows to check that statement
reading table doesn't allow concurrent inserts in it.
mysql-test/include/check_no_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table doesn't take locks on its rows.
mysql-test/include/check_shared_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table takes shared locks on some of its rows.
mysql-test/r/bug39022.result:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/r/innodb_mysql_lock2.result:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/r/lock_sync.result:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
mysql-test/t/bug39022.test:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/t/innodb_mysql_lock2.test:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/t/lock_sync.test:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
sql/log_event.cc:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/log_event.h:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/sp_head.cc:
sp_head::reset_lex():
Before parsing substatement reset part of parser state
which needs this (e.g. set Yacc_state::m_lock_type to
default value).
sql/sql_acl.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_base.cc:
Changed read_lock_type_for_table() to return a weak TL_READ
type of lock in cases when we are executing statement which
won't update tables directly and table doesn't belong to
statement's prelocking list and thus can't be used by a
stored function. It is OK to do so since in this case table
won't be used by statement or function call which will be
written to the binary log, so serializability requirements
for it can be relaxed.
One of results from this change is that SELECTs on InnoDB
tables no longer takes shared row locks for tables which
are used in subqueries (i.e. bug #46947 is fixed).
Another result is that for similar SELECTs on MyISAM tables
concurrent inserts are allowed.
In order to implement this change signature of
read_lock_type_for_table() function was changed to take
pointers to Query_tables_list and TABLE_LIST objects.
sql/sql_base.h:
- Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_lex.cc:
- Removed LEX::lock_option and st_select_lex::lock_option
members. Places in parser that were using them now use
Yacc_state::m_lock_type instead.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class. It is now reset by
Query_tables_list::reset_query_tables_list() method.
sql/sql_lex.h:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
sql/sql_load.cc:
Load_log_event constructor now requires a parameter that
indicates whether LOAD DATA is concurrent.
sql/sql_parse.cc:
LEX::lock_option was replaced with Yacc_state::m_lock_type.
And instead of resetting the latter implicitly in
mysql_init_multi_delete() we do it explicitly in the
places in parser which call this function.
sql/sql_priv.h:
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method added flag for
HIGH_PRIORITY option.
sql/sql_select.cc:
Changed code not to rely on LEX::lock_option to determine
that it is high-priority SELECT. It was replaced with
Yacc_state::m_lock_type which is accessible only at
parse time. So instead of LEX::lock_option we now rely
on a newly introduced flag for st_select_lex::options -
SELECT_HIGH_PRIORITY.
sql/sql_show.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed.
sql/sql_table.cc:
Since LEX::reset_query_tables_list() now also resets
LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore value of this
member when this method is called by mysql_admin_table(),
to make this code safe for re-execution.
sql/sql_trigger.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_update.cc:
Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_yacc.yy:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method we now use new flag
in st_select_lex::options bit-field.
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Updated the test case to avoid checking inconsistencies between the master and slave
when session.binlog_direct_non_transactional_updates is ON and the format is statement.
In this scenario, they will diverge because a counter (within a triger) is incremented
and associated to the issued statement. However, an n-statement is logged ahead of
the transaction and thus is not executed by the same order in the slave and thus gets
a different value from the counter.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/log.cc:
Checked if either a trx-cache or a non-trx-cache should be used.
If bin_log_direct_non_trans_update is active or the format is either
MIXED or ROW, the cache to be used depends on the flag is_transactional.
When the format is STMT, the non-trx-cache should be used if the statement
is non-transactional and the trx-cache is empty, i.e. if any transactional
statement has not committed yet. Otherwise, the trx-cache should be used.
sql/share/errmsg-utf8.txt:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_class.cc:
Started printing ER_BINLOG_UNSAFE_MIXED_STATEMENT, when there
is a mixed-statement.
Organized the names of the variables and added comments.
sql/sql_lex.cc:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_lex.h:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
Makefile.am:
add new API files to the check_abi rule,
remove duplicates
client/CMakeLists.txt:
now a client can use dlopen too
client/Makefile.am:
be csh-friendly
include/my_global.h:
add dummy plugs for dlopen and co.
for the code that needs them to work in static builds
mysys/Makefile.am:
be csh-friendly
plugin/auth/dialog.c:
typo fixed
The log event of 'CREATE EVENT' was being binlogged with garbage
at the end of the query if 'CREATE EVENT' is followed by another SQL statement
and they were executed as one command.
for example:
DELIMITER |;
CREATE EVENT e1 ON EVERY DAY DO SELECT 1; SELECT 'a';
DELIMITER ;|
When binlogging 'CREATE EVENT', we always create a new statement with definer
and write it into the log event. The new statement is made from cpp_buf(preprocessed buffer).
which is not a c string(end with '\0'), but it is copied as a c string.
In this patch, cpp_buf is copied with its length.
Reading from a self-logging engine and updating a transactional engine such as Innodb
generates changes that are written to the binary log in the statement format and may
make slaves diverge. In the mixed mode, such changes should be written to the binary
log in the row format.
Note that the issue does not happen if we mix a self-logging engine and MyIsam
as this case is caught by checking the mixture of non-transactional and transactional
engines.
So, we classify a mixed statement where one reads from NDB and writes into another
engine as unsafe:
if (multi_engine && flags_some_set & HA_HAS_OWN_BINLOGGING)
lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE);
mysql-test/suite/rpl_ndb/r/rpl_ndb_mixed_engines_transactions.result:
Augmented test case to check mixed statements
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
Augmented test case to check mixed statements
sql/share/errmsg-utf8.txt:
Added ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
sql/sql_class.cc:
Redefined flags' name in order to have two sets of flags: (i) flags that are checked when there
is a write operation; (ii) flags that are checked regardless of the type of the operation.
Classified a mixed statement where one reads from NDB and writes into another engine as unsafe:
if (multi_engine && flags_some_set & HA_HAS_OWN_BINLOGGING)
lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE);
sql/sql_lex.cc:
Added error ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
sql/sql_lex.h:
Added BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_slow_query_log.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/options.cc
Text conflict in sql/mysqld.cc
Grouping by a subquery in a query with a distinct aggregate
function lead to a wrong result (wrong and unordered
grouping values).
There are two related problems:
1) The query like this:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa
returned wrong result, because the outer reference "t1.a"
in the subquery was substituted with the Item_ref item.
The Item_ref item obtains data from the result_field object
that refreshes once after the end of each group. This data
is not applicable to filesort since filesort() doesn't care
about groups (and doesn't update result_field objects with
copy_fields() and so on). Also that data is not applicable
to group separation algorithm: end_send_group() checks every
record with test_if_group_changed() that evaluates Item_ref
items, but it refreshes those Item_ref-s only after the end
of group, that is a vicious circle and the grouped column
values in the output are shifted.
Fix: if
a) we grouping by a subquery and
b) that subquery has outer references to FROM list
of the grouping query,
then we substitute these outer references with
Item_direct_ref like references under aggregate
functions: Item_direct_ref obtains data directly
from the current record.
2) The query with a non-trivial grouping expression like:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa+0
also returned wrong result, since JOIN::exec() substitutes
references to top-level aliases in SELECT list with Item_copy
caching items. Item_copy items have same refreshing policy
as Item_ref items, so the whole groping expression with
Item_copy inside returns wrong result in filesort() and
end_send_group().
Fix: include aliased items into GROUP BY item tree instead
of Item_ref references to them.
mysql-test/r/group_by.result:
Test case for bug #45640
mysql-test/t/group_by.test:
Test case for bug #45640
sql/item.cc:
Bug #45640: optimizer bug produces wrong results
Item_field::fix_fields() has been modified to resolve
aliases in GROUP BY item trees into aliased items instead
of Item_ref items.
sql/item.h:
Bug #45640: optimizer bug produces wrong results
- Item::find_item_processor() has been introduced.
- Item_ref::walk() has been modified to apply processors
to itself too (not only to referenced item).
sql/mysql_priv.h:
Bug #45640: optimizer bug produces wrong results
fix_inner_refs() has been modified to accept group_list
parameter.
sql/sql_lex.cc:
Bug #45640: optimizer bug produces wrong results
Initialization of st_select_lex::group_fix_field has
been added.
sql/sql_lex.h:
Bug #45640: optimizer bug produces wrong results
The st_select_lex::group_fix_field field has been introduced
to control alias resolution in Itef_fied::fix_fields.
sql/sql_select.cc:
Bug #45640: optimizer bug produces wrong results
- The fix_inner_refs function has been modified to treat
subquery outer references like outer fields under aggregate
functions, if they are included in GROUP BY item tree.
- The find_order_in_list function has been modified to
fix Item_field alias fields included in the GROUP BY item
trees in a special manner.
