low myisam_sort_buffer_size
Repair by sort (default) or parallel repair of a MyISAM table
(doesn't matter partitioned or not) as well as bulk inserts
and enable indexes some times didn't failover to repair with
key cache.
The problem was that after unsuccessful attempt, data file was
closed. Whereas repair with key cache requires open data file.
Fixed by reopening data file.
Also fixed a valgrind warning, which may appear during repair
by sort or parallel repair with certain myisam_sort_buffer_size
number of rows and length of an index entry (very dependent).
mysql-test/r/myisam.result:
A test case for BUG#47073.
mysql-test/t/myisam.test:
A test case for BUG#47073.
storage/myisam/ha_myisam.cc:
Reverted fix for BUG25289. Not needed anymore.
storage/myisam/mi_check.c:
Reopen data file, when repair by sort or parallel repair
fails.
When repair by sort is requested to rebuild data file, data file
gets rebuilt while fixing first index. When rebuild is completed,
info->dfile is pointing to temporary data file, original data file
is closed.
It may happen that repair has successfully fixed first index and
rebuilt data file, but failed to fix second index. E.g.
myisam_sort_buffer_size was big enough to fix first shorter index,
but not enough to fix subsequent longer index.
In this case we end up with info->dfile pointing to temporary file,
which is removed and info->dfile is set to -1.
Though repair by sort failed, the upper layer may still want to
try repair with key cache. But it needs info->dfile pointing to
valid data file.
storage/myisam/sort.c:
When performing a copy of IO_CACHE structure, current_pos and
current_end must be updated separatly to point to memory we're
copying to (not to memory we're copying from).
As t_file2 is always WRITE cache, proper members are write_pos
and write_end accordingly.
The bug is not related to MERGE table or TRIGGER. More correct description
would be 'assertion on multi-table UPDATE + NATURAL JOIN + MERGEABLE VIEW'.
On PREPARE stage(see test case) we call mark_common_columns() func which
creates ON condition for NATURAL JOIN and sets appropriate
table read_set bitmaps for fields which are used in ON condition.
On EXECUTE stage mark_common_columns() is not called, we set
necessary read_set bitmaps in setup_conds(). But 'B.f1' field
is already processed and related item alredy fixed before
setup_conds() as updated field and setup_conds can not set
read_set bitmap because of that.
The fix is to set read_set bitmap for appropriate table field even
if Item_direct_view_ref item which represents a refernce to this field
is fixed.
mysql-test/r/join.result:
test result
mysql-test/t/join.test:
test case
sql/item.cc:
The bug is not related to MERGE table or TRIGGER. More correct description
would be 'assertion on multi-table UPDATE + NATURAL JOIN + MERGEABLE VIEW'.
On PREPARE stage(see test case) we call mark_common_columns() func which
creates ON condition for NATURAL JOIN and sets appropriate
table read_set bitmaps for fields which are used in ON condition.
On EXECUTE stage mark_common_columns() is not called, we set
necessary read_set bitmaps in setup_conds(). But 'B.f1' field
is already processed and related item alredy fixed before
setup_conds() as updated field and setup_conds can not set
read_set bitmap because of that.
The fix is to set read_set bitmap for appropriate table field even
if Item_direct_view_ref item which represents a refernce to this field
is fixed.
trigger, merge table
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
The errors that will now halt multi-DELETE execution
altogether are
- triggers returning errors
- handler errors
- server being killed
mysql-test/r/delete.result:
Bug#46958: Test result.
mysql-test/t/delete.test:
Bug#46958: Test case.
sql/sql_class.h:
Bug#46958: New method declaration.
sql/sql_delete.cc:
Bug#46958: New method implementation.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
mysql-test/include/have_not_innodb_plugin.inc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added include file to allow test for only the
'old' built-in innodb engine
mysql-test/r/not_true.require:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added require to match 'not' TRUE
mysql-test/r/partition_innodb_builtin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/r/partition_innodb_plugin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the new plugin innodb engine
mysql-test/t/disabled.def:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Disabling the new test until the fix is
included in the InnoDB source too.
mysql-test/t/partition_innodb_builtin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/t/partition_innodb_plugin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the new plugin innodb engine
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added thd as a parameter to explain_filename
to be able to use the correct quote character
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Changed explain_filename, so that it does qouting
correctly according to the sessions qoute char.
value from the index (PRIMARY)
With the fix for BUG#46760, we correctly flag the presence of row_type
only when it's actually changed and enables the FAST ALTER TABLE which was
disabled with the BUG#39200.
So the changes made by BUG#46760 makes MySQL data dictionaries to be out of
sync but they are handled already by InnoDB with this BUG#44030.
The test was originally written to handle this but we requested Innodb to
update the test as the data dictionaries were in sync after the fix for
BUG#39200.
Adjusting the innodb-autoinc testcase as mentioned in the comments.
mysql-test/lib/mtr_cases.pm:
Re-enable the innodb-autoinc test case for plugin as we have a common
result file.
mysql-test/r/innodb-autoinc.result:
Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc
value from the index (PRIMARY)
Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the
FAST ALTER TABLE and makes the data dictonaries go out of sync. This is
expected in the testcase.
mysql-test/t/innodb-autoinc.test:
Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc
value from the index (PRIMARY)
Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the
FAST ALTER TABLE and makes the data dictonaries go out of sync. This is
expected in the testcase.
The "socket" variable is not available on Windows even though
the --socket option can be used to specify the pipe name for
local connections that use a named pipe.
The solution is to ensure that the variable is always defined.
mysql-test/r/windows.result:
Add test case result for Bug#45498
mysql-test/t/windows.test:
Add test case for Bug#45498
sql/set_var.cc:
socket variable must always be present.
checksum)"
The problem was that checksum of GEOMETRY type used memory addresses
in the computation, making it un-repeatable thus useless.
(This patch is a backport from 6.0 branch)
mysql-test/r/myisam.result:
test case for bug35570 that same tables give same checksums
mysql-test/t/myisam.test:
test case for bug35570 that same tables give same checksums
sql/sql_table.cc:
Type GEOMETRY is implemented on top of type BLOB, so, just like for BLOB,
its 'field' contains pointers which it does not make sense to include in
the checksum; it rather has to be converted to a string and then we can
compute the checksum.
Despite copying the value of the old table's row type
we don't always have to mark row type as being specified.
Innodb uses this to check if it can do fast ALTER TABLE
or not.
Fixed by correctly flagging the presence of row_type
only when it's actually changed.
Added a test case for 39200.
query
The fix for bug 46749 removed the check for OUTER_REF_TABLE_BIT
and substituted it for a check on the presence of
Item_ident::depended_from.
Removing it altogether was wrong : OUTER_REF_TABLE_BIT should
still be checked in addition to depended_from (because it's not
set in all cases and doesn't contradict to the check of depended_from).
Fixed by returning the old condition back as a compliment to the
new one.
additional backport of of bug43138 fix
mysql-test/t/myisam-system.test:
additional backport of of bug43138 fix
sql/sql_db.cc:
additional backport of of bug43138 fix
1. Fixes BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc value
from the index (PRIMARY)
2. Disables the innodb-autoinc test for innodb plugin temporarily.
The testcase for this bug has different result file for InnoDB plugin.
Should add the testcase to Innodb suite with a different result file.
Detailed revision comments:
r5243 | sunny | 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) | 14 lines
branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before
the bug fix we would assert on missing autoinc columns. With this fix we allow
MySQL to open the table but set the next autoinc value for the column to the
MAX value. This effectively disables the next value generation. INSERTs will
fail with a generic AUTOINC failure. However, the user should be able to
read/dump the table, set the column values explicitly, use ALTER TABLE to
set the next autoinc value and/or sync the two data dictionaries to resume
normal operations.
Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the
index (PRIMARY)
rb://118
r5252 | sunny | 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) | 2 lines
branches/5.1: The version of the result file checked in was broken in r5243.
r5259 | vasil | 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) | 7 lines
branches/5.1:
Remove the word "Error" from the printout because the mysqltest suite
interprets it as an error and thus the innodb-autoinc test fails.
Approved by: Sunny (via IM)
r5466 | vasil | 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) | 6 lines
branches/5.1:
Adjust the failing innodb-autoinc test to conform to the latest behavior
of the MySQL code. The idea and the comment in innodb-autoinc.test come
from Sunny.
The problem is that argument buffer can be used as result buffer
and it leads to argument value change.
The fix is to use 'old buffer' as result buffer only
if first argument is not constant item.
mysql-test/r/func_str.result:
test result
mysql-test/t/func_str.test:
test case
sql/item_strfunc.cc:
The problem is that argument buffer can be used as result buffer
and it leads to argument value change.
The fix is to use 'old buffer' as result buffer only
if first argument is not constant item.
partial backport of bug43138 fix
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_class.cc:
partial backport of bug43138 fix
sql/sql_class.h:
partial backport of bug43138 fix
sql/sql_table.cc:
partial backport of bug43138 fix
Archive engine returns wrong values for average record length
and max data length.
With this fix they're calculated as following:
- max data length is 2 ^ 63 where large files are supported
and INT_MAX32 where this is not supported;
- average record length is data length / records in data file.
mysql-test/r/archive.result:
A test case for BUG#29203.
mysql-test/t/archive.test:
A test case for BUG#29203.
storage/archive/ha_archive.cc:
Better estimation for average row length and maximal data
file length.
Create temporary InnoDB table fails on case insensitive
filesystems, when lower_case_table_names is 2 (e.g. OS X)
and temporary directory path contains upper case letters.
The problem was that tmpdir prefix was converted to lower
case when table was created, but was passed as is when
table was opened.
Fixed by leaving tmpdir prefix part intact.
mysql-test/r/lowercase_mixed_tmpdir_innodb.result:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.opt:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.sh:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb.test:
A test case for BUG#45638.
sql/handler.cc:
Fixed get_canonical_filename() to not lowercase filesystem
path prefix for temporary tables.
The parser rule for expressions in a udf parameter list contains
two hacks:
First, the parser input stream is read verbatim, bypassing
the lexer.
Second, the Item::name field is overwritten. If the argument to a
udf was a field, the field's name as seen by name resolution was
overwritten this way.
If the field name was quoted or escaped, it would appear as e.g. "`field`".
Fixed by not overwriting field names.
mysql-test/r/udf.result:
Bug#46259: Test result.
mysql-test/t/udf.test:
Bug#46259: Test case.
sql/sql_yacc.yy:
Bug#46259: Fix.
This test case uses mysqlbinlog to dump the content of master-bin.000001,
but the content of master-bin.000001 is not that this test needs.
MTR runs a lot of test cases on one server, so when this test starts, the current binlog file
might not be master-bin.000001, or there are other events are written by tests before.
'RESET MASTER' command must be called at the begin, it ensures that binlog of this test
is wrote to master-bin.000001 correctly.
Three other tests have the same problem, They were fixed together.
mysqlbinlog-cp932
binlog_incident
binlog_tmp_table
The external 'for' loop in remove_dup_with_compare() handled
HA_ERR_RECORD_DELETED by just starting over without advancing
to the next record which caused an infinite loop.
This condition could be triggered on certain data by a SELECT
query containing DISTINCT, GROUP BY and HAVING clauses.
Fixed remove_dup_with_compare() so that we always advance to
the next record when receiving HA_ERR_RECORD_DELETED from
rnd_next().
mysql-test/r/distinct.result:
Added a test case for bug #46159.
mysql-test/t/distinct.test:
Added a test case for bug #46159.
sql/sql_select.cc:
Fixed remove_dup_with_compare() so that we always advance to
the next record when receiving HA_ERR_RECORD_DELETED from
rnd_next().
The plugin feature is disabled, you need HAVE_DLOPEN
Selectively skip tests that require dynamic loading (ie: static builds).
mysql-test/include/have_dynamic_loading.inc:
Add require file.
mysql-test/t/ps_not_windows.test:
Test requires dynamic loading support.
on subquery inside a SP
Problem: repeated call of a SP containing an incorrect query with a
subselect may lead to failed ASSERT().
Fix: set proper sublelect's state in case of error occured during
subquery transformation.
mysql-test/r/sp.result:
Fix for bug#46629: Item_in_subselect::val_int(): Assertion `0'
on subquery inside a SP
- test result.
mysql-test/t/sp.test:
Fix for bug#46629: Item_in_subselect::val_int(): Assertion `0'
on subquery inside a SP
- test case.
sql/item_subselect.cc:
Fix for bug#46629: Item_in_subselect::val_int(): Assertion `0'
on subquery inside a SP
- don't set Item_subselect::changed in the Item_subselect::fix_fields()
if an error occured during subquery transformation.
That prevents us of further processing incorrect subqueries after
Item_in_subselect::select_in_like_transformer().
SELECT with join (not only self-join) from archive table may
return incomplete result set, when result set size exceeds
join buffer size.
The problem was that archive row counter was initialzed too
early, when ha_archive::info() method was called. Later,
when optimizer exceeds join buffer, it attempts to reuse
handler without calling ha_archive::info() again (which is
correct).
Fixed by moving row counter initialization from
ha_archive::info() to ha_archive::rnd_init().
mysql-test/r/archive.result:
A test case for BUG#46961.
mysql-test/t/archive.test:
A test case for BUG#46961.
storage/archive/ha_archive.cc:
Since a cursor may get reused without a call to ::info(),
move assignment of scan_rows to a proper place, that is
::rnd_init().
Memory allocated in TMP_TABLE_PARAM::copy_field is not cleaned up.
The fix is to clean up TMP_TABLE_PARAM::copy_field array in JOIN::destroy.
mysql-test/r/explain.result:
test result
mysql-test/t/explain.test:
test case
sql/sql_select.cc:
Memory allocated in TMP_TABLE_PARAM::copy_field is not cleaned up.
The fix is to clean up TMP_TABLE_PARAM::copy_field array in JOIN::destroy.
name as existing view
When trying to create a table with the same name as existing view with
join, mysql server crashes.
The problem is when create table is issued with the same name as view, while
verifying with the existing tables, we assume that base table object is
created always.
In this case, since it is a view over multiple tables, we don't have the
mysql derived table object.
Fixed the logic which checks if there is an existing table to not to assume
that table object is created when the base table is view over multiple
tables.
mysql-test/r/create.result:
BUG#46384 - mysqld segfault when trying to create table with same
name as existing view
Testcase for the bug
mysql-test/t/create.test:
BUG#46384 - mysqld segfault when trying to create table with same
name as existing view
Testcase for the bug
sql/sql_insert.cc:
BUG#46384 - mysqld segfault when trying to create table with same
name as existing view
Fixed create_table_from_items() method to properly check, if the base table
is a view over multiple tables.
function,file sql_base.cc
When uncacheable queries are written to a temp table the optimizer must
preserve the original JOIN structure, because it is re-using the JOIN
structure to read from the resulting temporary table.
This was done only for uncacheable sub-queries.
But top level queries can also benefit from this mechanism, specially if
they're using index access and need a reset.
Fixed by not limiting the saving of JOIN structure to subqueries
exclusively.
Added a new test file to extend the existing (large) subquery.test.
extraneous file
Online/fast ALTER TABLE of a partitioned table may leave
temporary file in database directory.
Fixed by removing unnecessary call to
handler::ha_create_handler_files(), which was creating
partitioning definition file.
mysql-test/r/partition_innodb.result:
A test case for BUG#46483.
mysql-test/t/partition_innodb.test:
A test case for BUG#46483.
sql/unireg.cc:
Do not call ha_create_handler_files() when we were requested
to create only dot-frm file.
a "if"
Bug #41913 mysqltest cannot source files from if inside while
Some commands require additional processing which only works first time
Keep content for write_file or append_file with the st_command struct
Add tests for those cases to mysqltest.test
