The code erroneously called sec_since_epoch() for dates with zeros,
e.g. '2024-00-01'.
Fixi: adding a test that the date does not have zeros before
calling TIME_to_native().
The code in my_strtoll10_mb2 and my_strtoll10_utf32
could hit undefinite behavior by negation of LONGLONG_MIN.
Fixing to avoid this.
Also, fixing my_strtoll10() in the same style.
The previous reduction produced a redundant warning on
CAST(_latin1'-9223372036854775808' AS SIGNED)
The code in my_strntoull_8bit() and my_strntoull_mb2_or_mb4()
could hit undefinite behavior by negating of LONGLONG_MIN.
Fixing the code to avoid this.
Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
The loose regex for the MDEV-34539 test ended up
matching the opensuse in the path in buildbot.
Adjust to more complete regex including space,
backtick and \n, which becomes much less common
as a path name.
The failing test case validates Seconds_Behind_Master for a delayed
slave, while STOP SLAVE is executed during a delay. The test fixes
initially added to the test (commit b04c857596) added a table lock
to ensure a transaction could not finish before validating the
Seconds_Behind_Master field after SLAVE START, but did not address a
possibility that the transaction could finish before running the
STOP SLAVE command, which invalidates the validations for the rest
of the test case. Specifically, this would result in 1) a timeout in
“Waiting for table metadata lock” on the replica, which expects the
transaction to retry after slave restart and hit a lock conflict on
the locked tables (added in b04c857596), and 2) that
Seconds_Behind_Master should have increased, but did not.
The failure can be reproduced by synchronizing the slave to the master
before the MDEV-32265 echo statement (i.e. before the SLAVE STOP).
This patch fixes the test by adding a mechanism to use DEBUG_SYNC to
synchronize a MASTER_DELAY, rather than continually increase the
duration of the delay each time the test fails on buildbot. This is
to ensure that on slow machines, a delay does not pass before the
test gets a chance to validate results. Additionally, it decreases
overall test time because the test can continue immediately after
validation, thereby bypassing the remainder of a full delay for each
transaction.
A CHAR column cannot be longer than 1024, because
Binlog_type_info_fixed_string::Binlog_type_info_fixed_string
replies on this fact - it cannot store binlog metadata for longer columns.
In case of the filename character set mbmaxlen is equal to 5,
so only 1024/5=204 characters can fit into the 1024 limit.
- In strict mode:
Disallowing creation of a CHAR column with octet length grater than 1024.
- In non-strict mode:
Automatically convert CHAR with octet length>1024 into VARCHAR.
In the bug report MDEV-32817 it occurred that the function
row_mysql_get_table_status() is outputting a fil_space_t*
as if it were a numeric tablespace identifier.
ib_push_warning(): Remove. Let us invoke push_warning_printf() directly.
innodb_decryption_failed(): Report a decryption failure and set the
dict_table_t::file_unreadable flag. This code was being duplicated in
very many places. We return the constant value DB_DECRYPTION_FAILED
in order to avoid code duplication in the callers and to allow tail calls.
innodb_fk_error(): Report a FOREIGN KEY error.
dict_foreign_def_get(), dict_foreign_def_get_fields(): Remove.
This code was being used in dict_create_add_foreign_to_dictionary()
in an apparently uncovered code path. That ib_push_warning() call
would pass the integer i+1 instead of a pointer to NUL terminated
string ("%s"), and therefore the call should have resulted in a crash.
dict_print_info_on_foreign_key_in_create_format(),
innobase_quote_identifier(): Add const qualifiers.
row_mysql_get_table_error(): Replaces row_mysql_get_table_status().
Display no message on DB_CORRUPTION; it should be properly reported at
the SQL layer anyway.
The memory leak happened on second execution of a prepared statement
that runs UPDATE statement with correlated subquery in right hand side of
the SET clause. In this case, invocation of the method
table->stat_records()
could return the zero value that results in going into the 'if' branch
that handles impossible where condition. The issue is that this condition
branch missed saving of leaf tables that has to be performed as first
condition optimization activity. Later the PS statement memory root
is marked as read only on finishing first time execution of the prepared
statement. Next time the same statement is executed it hits the assertion
on attempt to allocate a memory on the PS memory root marked as read only.
This memory allocation takes place by the sequence of the following
invocations:
Prepared_statement::execute
mysql_execute_command
Sql_cmd_dml::execute
Sql_cmd_update::execute_inner
Sql_cmd_update::update_single_table
st_select_lex::save_leaf_tables
List<TABLE_LIST>::push_back
To fix the issue, add the flag SELECT_LEX::leaf_tables_saved to control
whether the method SELECT_LEX::save_leaf_tables() has to be called or
it has been already invoked and no more invocation required.
Similar issue could take place on running the DELETE statement with
the LIMIT clause in PS/SP mode. The reason of memory leak is the same as for
UPDATE case and be fixed in the same way.
MySQL-Connector-Net casts SEQ_IN_INDEX to uint and will
raise an exception if the type is a System.Int64.
As we don't support a huge number of multi-columns in
an index reducing to a uint is sufficient to represent
all values and maintain compatibility with MySQL-Connector-Net.
This matches the type (uint) returned by MySQL-8.3 and 8.0.
Reviewer: Alexander Barkov <bar@mariadb.com>
It's possible that MDL conflict handling code is called more
than once for a transaction when:
- it holds more than one conflicting MDL lock
- reschedule_waiters() is executed,
which results in repeated attempts to BF-abort already aborted
transaction.
In such situations, it might be that BF-aborting logic sees
a partially rolled back transaction and erroneously decides
on future actions for such a transaction.
The specific situation tested and fixed is when a SR transaction
applied in the node gets BF-aborted by a started TOI operation.
It's then caught with the server transaction already rolled back,
but with no MDL locks yet released. This caused wrong state
detection for such a transaction during repeated MDL conflict
handling code execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Fixes galera.galera_bf_kill_debug test case.
* Enable galera_ssl_upgrade, galera_ssl_reload, galera_pc_bootstrap
* Add MDEV to disabled tests that miss it
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Based on logs SST was started before donor reached
Primaty state. Add wait_conditions to make sure that
nodes reach Primary state before starting next node.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
For TOI events specifically we have a situation where in case of the
same error different nodes may generate different messages. This may
be for two reasons:
- different locale setting between the current client session and
server default (we can reasonably require server locales to be
identical on all nodes, but user can change message locale for the
session)
- non-deterministic course of STATEMENT execution e.g. for ALTER TABLE
On the other hand we may reasonably expect TOI event failures since
they are executed after replication, so we must ensure that voting is
consistent. For that purpose error codes should be sufficiently unique
and deterministic for TOI event failures as DDLs normally deal with
a single object, so we can merely use MySQL error codes to vote on.
Notice that this problem does not happen with regular transactional
writesets, since the originator node will always vote success and
replica nodes are assumed to have the same global locale setting.
As such different error messages indicate different errors even if
the error code is the same (e.g. ER_DUP_KEY can happen on different
rows tables).
Use only MySQL error code (without the error message) for error voting
in case of TOI event failure.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that wsrep_schema tables were not marked as
category information. Fix allows access to wsrep_schema
tables even when node is detached.
This is 10.4-10.9 version of fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The test was expecting the I/O thread to be in a specific state, but thread
scheduling may cause it to not yet have reached that state. So just have a
loop that waits for the expected state to occur.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Remove the test for MDEV-14528. This is supposed to test that parallel
replication from pre-10.0 master will update Seconds_Behind_Master. But
after MDEV-12179 the SQL thread is blocked from even beginning to fetch
events from the relay log due to FLUSH TABLES WITH READ LOCK, so the test
case is no longer testing what is was intended to. And pre-10.0 versions are
long since out of support, so does not seem worthwhile to try to rewrite the
test to work another way.
The root cause of the test failure is MDEV-34778. Briefly, depending on
exact timing during slave stop, the rli->sql_thread_caught_up flag may end
up with different value. If it ends up as "true", this causes
Seconds_Behind_Master to be 0 during next slave start; and this caused test
case timeout as the test was waiting for Seconds_Behind_Master to become
non-zero.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Depending on timing, an extra event run could start just when the event
scheduler is shut down and delay running until after the table has been
dropped; this would cause the test to fail with a "table does not exist"
error in the log.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The original code is correct.
valgrind and asan binaries should be built with a specialiced version of
mem_root that makes it easier to find memory overwrites.
This is what the BUILD scripts is doing.
The specialiced mem_root code allocates a new block for every allocation
which is visiable for any test that depenmds on the default original malloc
size and usage.
- Added plugin_debug.test, multiple_index.test to innodb_fts suite
from mysql-5.7.
- commit c5b28e55f6 removes the warning
for InnoDB rebuilding table to add FTS_DOC_ID
- multiple_index test case has MATCH(a) values are smaller
than in MySQL because ROLLBACK updates the stat_n_rows.
- st_mysql_ftparser_boolean_info structure conveys boolean
metadata to mysql search engine for every word in the query.
This structure misses the position value to store the correct
offset of every word. So phrase search queries in plugin_debug
test case with boolean mode for simple parser throws
wrong result.
int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)
CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.
At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.
At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
A mixture of a multi-byte *TEXT column and a short binary column
produced a too large column.
For example, COALESCE(tinytext_utf8mb4, short_varbinary)
produced a BLOB column instead of an expected TINYBLOB.
- Adding a virtual method Type_all_attributes::character_octet_length(),
returning max_length by default.
- Overriding Item_field::character_octet_length() to extract
the octet length from the underlying Field.
- Overriding Item_ref::character_octet_length() to extract
the octet length from the references Item (e.g. as VIEW fields).
- Fixing Type_numeric_attributes::find_max_octet_length() to
take the octet length using the new method character_octet_length()
instead of accessing max_length directly.
Assertion `table->field[0]->ptr >= table->record[0] &&
table->field[0]->ptr <= table->record[0] + table->s->reclength' failed in
handler::assert_icp_limitations.
table->move_fields has some limitations:
1. It cannot be used in cascade
2. It should always have a restoring pair.
Rule 1 is covered by assertions in handler::assert_icp_limitations
and handler::ptr_in_record (commit 30894fe9a9).
Rule 2 should be manually maintained with care. Hopefully, the rule 1 assertions
may sometimes help as well.
In ha_myisam::repair, both rules are broken. table->move_fields is used
asymmetrically there: it is set on every param->fix_record call
(i.e. in compute_vcols) but is restored only once, in the end of repair.
The reason to updating field ptr's for every call is that compute_vcols can
(supposedly) be called in parallel, that is, with the same table, but different
records.
The condition to "unmove" the pointers in ha_myisam::restore_vcos_after_repair
is incorrect, when stored vcols are available, and myisam stores a VIRTUAL field
if it's the only field in the table (the record cannot be of zero length).
This patch solves the problem by "unmoving" the pointers symmetrically, in
compute_vcols. That is, both rules will be preserved maintained.