'No database selected' is reported when calling stored procedures
Remove the offending warning introduced by the fix for Bug
25082
This minimal patch relies on the intrinsic knowledge of the fact that
mysql_change_db is never called with 'force_switch' set to TRUE
when such a warning may be needed:
* every stored routine belongs to a database (unlike, e.g., a
user defined function, which does not), so if we're activating the
database of a stored routine, it can never be NULL.
Therefore, this branch is never called for activation.
* if we're restoring the 'old' current database after routine
execution is complete, we should not issue a warning, since it's OK to
call a routine without having previously selected the current database.
TODO: 'force_switch' is an ambiguous flag, since we do not actually
have to 'force' the switch in case of stored routines at all.
When we activate the routine's database, we should perform
all the checks as in case of 'use db', and so we already do (in this
case 'force_switch' is unused).
When we load a routine into cache, we should not use mysql_change_db
at all, since there it's enough to call thd->reset_db(). We
do it this way for triggers, but code for routines is different (wrongly).
TODO: bugs are lurking in replication, since it bypasses mysql_change_db
and calls thd->[re_]set_db to set the current database.
The latter does not change thd->db_charset, thd->sctx->db_access
and thd->variables.collation_database (and this may have nasty side
effects).
These todo items are to be addressed in a separate patch, if at all.
The problem was that THD::db_access variable was not restored after
database switch in stored-routine-execution code.
The fix is to restore THD::db_access in this case.
Unfortunately, this fix requires additional changes,
because in prepare_schema_table(), called on the parsing stage, we checked
privileges. That was wrong according to our design, but this flaw haven't
struck so far, because it was masked. All privilege checkings must be
done on the execution stage in order to be compatible with prepared statements
and stored routines. So, this patch also contains patch for
prepare_schema_table(), which moves the checkings to the execution phase.
execution breaks replication.
When a stored routine is executed, we switch current
database to the database, in which the routine
has been created. When the stored routine finishes,
we switch back to the original database.
The problem was that if the original database does not
exist (anymore) after routine execution, we raised an error.
The fix is to report a warning, and switch to the NULL database.
Fixed compiler warnings (detected by VC++):
- Removed not used variables
- Added casts
- Fixed wrong assignments to bool
- Fixed wrong calls with bool arguments
- Added missing argument to store(longlong), which caused wrong store method to be called.
(race cond)
It was possible for one thread to interrupt a Data Definition Language
statement and thereby get messages to the binlog out of order. Consider:
Connection 1: Drop Foo x
Connection 2: Create or replace Foo x
Connection 2: Log "Create or replace Foo x"
Connection 1: Log "Drop Foo x"
Local end would have Foo x, but the replicated slaves would not.
The fix for this is to wrap all DDL and logging of a kind in the same mutex.
Since we already use mutexes for the various parts of altering the server,
this only entails moving the logging events down close to the action, inside
the mutex protection.
Fix for BUG#16676: Database CHARSET not used for stored procedures
The problem in BUG#16211 is that CHARSET-clause of the return type for
stored functions is just ignored.
The problem in BUG#16676 is that if character set is not explicitly
specified for sp-variable, the server character set is used instead
of the database one.
The fix has two parts:
- always store CHARSET-clause of the return type along with the
type definition in mysql.proc.returns column. "Always" means that
CHARSET-clause is appended even if it has not been explicitly
specified in CREATE FUNCTION statement (this affects BUG#16211 only).
Storing CHARSET-clause if it is not specified is essential to avoid
changing character set if the database character set is altered in
the future.
NOTE: this change is not backward compatible with the previous releases.
- use database default character set if CHARSET-clause is not explicitly
specified (this affects both BUG#16211 and BUG#16676).
NOTE: this also breaks backward compatibility.
No test case as the bug is in an existing test case (rpl_trigger.test
when it is run under valgrind).
The warning was caused by memory corruption in replication slave: thd->db
was pointing at a stack address that was previously used by
sp_head::execute()::old_db. This happened because mysql_change_db
behaved differently in replication slave and did not make a copy of the
argument to assign to thd->db.
The solution is to always free the old value of thd->db and allocate a new
copy, regardless whether we're running in a replication slave or not.
Bug#19022 "Memory bug when switching db during trigger execution"
Bug#17199 "Problem when view calls function from another database."
Bug#18444 "Fully qualified stored function names don't work correctly in
SELECT statements"
Documentation note: this patch introduces a change in behaviour of prepared
statements.
This patch adds a few new invariants with regard to how THD::db should
be used. These invariants should be preserved in future:
- one should never refer to THD::db by pointer and always make a deep copy
(strmake, strdup)
- one should never compare two databases by pointer, but use strncmp or
my_strncasecmp
- TABLE_LIST object table->db should be always initialized in the parser or
by creator of the object.
For prepared statements it means that if the current database is changed
after a statement is prepared, the database that was current at prepare
remains active. This also means that you can not prepare a statement that
implicitly refers to the current database if the latter is not set.
This is not documented, and therefore needs documentation. This is NOT a
change in behavior for almost all SQL statements except:
- ALTER TABLE t1 RENAME t2
- OPTIMIZE TABLE t1
- ANALYZE TABLE t1
- TRUNCATE TABLE t1 --
until this patch t1 or t2 could be evaluated at the first execution of
prepared statement.
CURRENT_DATABASE() still works OK and is evaluated at every execution
of prepared statement.
Note, that in stored routines this is not an issue as the default
database is the database of the stored procedure and "use" statement
is prohibited in stored routines.
This patch makes obsolete the use of check_db_used (it was never used in the
old code too) and all other places that check for table->db and assign it
from THD::db if it's NULL, except the parser.
How this patch was created: THD::{db,db_length} were replaced with a
LEX_STRING, THD::db. All the places that refer to THD::{db,db_length} were
manually checked and:
- if the place uses thd->db by pointer, it was fixed to make a deep copy
- if a place compared two db pointers, it was fixed to compare them by value
(via strcmp/my_strcasecmp, whatever was approproate)
Then this intermediate patch was used to write a smaller patch that does the
same thing but without a rename.
TODO in 5.1:
- remove check_db_used
- deploy THD::set_db in mysql_change_db
See also comments to individual files.
The order of acquiring LOCK_mysql_create_db
and wait_if_global_read_lock() was wrong. It could happen
that a thread held LOCK_mysql_create_db while waiting for
the global read lock to be released. The thread with the
global read lock could try to administrate a database too.
It would first try to lock LOCK_mysql_create_db and hang...
The check if the current thread has the global read lock
is done in wait_if_global_read_lock(), which could not be
reached because of the hang in LOCK_mysql_create_db.
Now I exchanged the order of acquiring LOCK_mysql_create_db
and wait_if_global_read_lock(). This makes
wait_if_global_read_lock() fail with an error message for
the thread with the global read lock. No deadlock happens.
- Change "mysql_create_db" to not call "send_ok" if in silent mode i.e. called from "load_master_data"
- Change mysqltest to detect when there aren't as many warnings available as was reported.
we changing current db temporarily and restore it when sp is created. however thd->db
in this case becomes empty string rather than NULL and so all checks of thd->db == NULL
will be false. So if after this we'll issue create procedure sp2()... without specifying
db it will succeed and create sp with db=NULL, which causes mysqldto crash on
show procedure status statement.
This patch fixes the problem.
- Added functionality to check errors returned from mysql_next_result
- Exit from mysqltest when and unexpected error occurs.
- The above fixes reveal problems with rpl000009, sp-error and query_cache-
- Fix sp-error by adding an expected error
- Fix rpl000009 by not sending "ok" from mysql_create_db when called with silent flag from load_master_data
- Fix query_cache in separate patch
produce warning for 'create database if not exists' if database exists
do not update database options in this case
produce warning for 'create table if not exists' if table exists
We binlog the DROP TABLE for each table that was actually dropped. Per Sergei's
suggestion a fixed buffer for the DROP TABLE query is pre-allocated from THD pool, and
logging now is done in batches - new batch is started if the buffer becomes full.
Reduced memory usage by reusing the table list instead of accumulating a list of
dropped table names. Also fixed the problem if the table was not actually dropped, eg
due to permissions. Extended the test case to make sure batched query
logging does work.
The problem was that on Windows the access method indicates that access to file
such as "com1" and "lpt1" is allowed (since they are device names) and
this causes mysql to attempt to open them as databases or tables.
The fix was to write our own my_access method that uses other Win32 functions
to determine if the given argument is indeed a file and has to requested
mode.
Windows to call CreateFileMapping() with correct arguments, and
propogating the introduction of query_id_t to everywhere query ids are
passed around. (Bug #8826)
